mitchg

Balzo98

Inspired by a product found online I've decided to make my own version of Calcifer Candle!For this print you will need one tealight with 3.8cm diameter (I think it's the standard for tealight).The model is made by 3 pieces:<ul><li>Calcifer</li><li>The candle</li><li>The base </li></ul>The candle and the base are very easy to print and you can print it without support (but to be sure i suggest to you to print the base with support).Calcifer unluckily it's tricky to print since it has to be only wall, I suggest to you tree support. Maybe you'll need to print a pair of calcifer before you obtain a good print.I reccomand also to print calcifer in a clear translucent filament.Another important reccomandation is for Calcifer paint. you have to paint with a very thin layer of colors mixed with water.This two reccomandation are important because the lealight has a very small led inside.For the final assembly you have to glue Calcifer to the light (I used hot glue).When you want to turn on the light you have to remove Calcifer since the tealight have the switch under itself.&nbsp;Hope you enjoy the model al much I've enjoyed modeling and printing!

Calcifer Candle tealight

Anime

vhart0

<h2>Hit the high note in organization and style with the OMEGA Headphone Stand! </h2>&nbsp;This 3D printed masterpiece is more than just a stand—it's a statement piece for your desk or audio setup. Crafted to keep your headphones in perfect harmony with your space, the elegant, swooping lines and bold silhouette of this stand are designed to complement and enhance the look of your favorite audio gear. The stand's stability is music to the ears of any audiophile, ensuring your headphones rest securely between sessions. Print your own in a symphony of colors or a classic monochrome to match your personal style and decor. It's time to give your headphones a home that's as high-fidelity as the sound they deliver!

Omega - Timeless Headphone Stand / Headset Holder

Audio

cyanidesugar

“Tell me what it is you truly desire” &nbsp;A Hueforge print of Lucifer from the Netflix (but previously aired on Fox) show. &nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: <ul><li>PLA Siddament Black Transmission Distance: 0.2</li><li>PLA META Sunlu Red Transmission Distance: 4</li><li>PLA Sunlu Beige Transmission Distance: 8.2</li><li>PLA META Sunlu White Transmission Distance: 9.6</li></ul>Swap Instructions: <ul><li>Start with Black</li><li>At layer #10 (0.88mm) swap to Red</li><li>At layer #14 (1.2mm) swap to Beige</li><li>At layer #25 (2.08mm) swap to White for the rest.</li></ul>

Lucifer - Hueforge Print

hueforge

Yozzie

Schitt Stack mount by <a target="_blank" href="https://www.thingiverse.com/kaleun96/designs" rel="nofollow noopener">kaleun96</a>, remixed by <a target="_blank" href="https://www.thingiverse.com/monolithnz/designs" rel="nofollow noopener">MonolithNZ</a> for use without Introprose RCA connector. The four screw holes for connecting the mount to the underside of the desk are suited for 4mm diameter, 15mm long, wood screws with a countersunk head no larger than 7mm in diameter.&nbsp;The two files are spaced appropriately for printing on one plate, I've included the separate files if you want to print on an A1 Mini. You should be able to exclude an object when printing to make it fit, however.

Schiit Stack Under Desk Mount - Standard Feet

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;This a Batman figure modeled after Batman: The Animated Series with styling by Bruce Timm.&nbsp;Watching Batman: The Animated Series (BTAS) and Justice League Unlimited animated shows, back in the day, I was introduced to Bruce Timm&#39;s minimalist, angular outlines and I loved his designs ever since. I thought that with this simplified contours, I don&#39;t need to know anatomy and would be able to draw/sculpt his characters. I collected reference materials and studied this particular style in hopes that one day I will be able to draw characters in this style.&nbsp;Life happened and 30 years after, with the tools available today, I finally had the time and courage to learn digital sculpting. It was a dream come true being able to sculpt and 3D print Bruce Timm&#39;s version of Batman.&nbsp;Throughout the sculpting process, I made sure the overall minimalist styling, angular contours and the face sculpt are accurate to the animated version but reduced some of the exaggerated proportions to improve it further. Hope you like it!<h3>IMPORTANT</h3>Please adhere to the license I set for this model. This model is NOT FOR COMMERCIAL USE. I have not given anyone permission to sell both digital or physical copies of this model.<h3>PRINTING &amp; ASSEMBLY INSTRUCTIONS</h3><ol><li>Select between the available scales:<ol><li>1/12 (6in. tall, minus the base) - ideal if you want a bigger model for display and do not have a 0.2mm nozzle</li><li>1/18 (4in. tall, minus the base) - choose this scale if you want a smaller figure that could fit a small desk or display case (requires 0.2mm nozzle). <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139876/design/2024-01-15_df179fb2a4986.png"></li></ol></li><li>Print the parts as oriented in the profiles. Supports are required on some areas of the model. The profiles have all the supports set already. The eyes go in as one piece. They go into the eye sockets from the inside but not all the way through. Use a tweezer to get the eyes in. </li><li>Use glue/adhesive to attach the parts. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139876/design/2024-01-15_23c8734f34f18.jpg"> </li><li>BE CAREFUL removing the supports from the cowl as area especially the mask is thin and could detach along with the supports.</li></ol><h3>FILAMENTS USED</h3><ul><li>cowl, cape, boots: Polymaker Polyterra Charcoal Black</li><li>belt: Savannah Yellow</li><li>body: Matter Hackers Build PLA Silver</li><li>eyes: Inland PLA White</li><li>face: Inland PLA Pastel Pink</li></ul>

Batman Animated / Justice League Unlimited Figure

comics

This chameleon looks like it's popping out of the wall tiles - however, this print is only 2mm thick, and the illusion is the result of the amazing colour blending from the different filament colours!&nbsp;The 3MF will have all necessary filament swaps already coded in if you're using Bambu studio. If you're not, you can download the STL in the attachments, and follow the following instructions:&nbsp;Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm&nbsp;Filaments Used:<ul><li>PLA Kingroon Black Transmission Distance: 0.4</li><li>PLA Siddament Purple Sparkle Transmission Distance: 5</li><li>PLA Sunlu Lilac Transmission Distance: 6.6</li><li>PLA Kingroon White Transmission Distance: 8</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #11 (1mm) swap to Purple</li><li>At layer #13 (1.16mm) swap to Lilac</li><li>At layer #19 (1.64mm) swap to White for the rest.</li></ul>_______________________________________If you'd like to support me, I now have a <a target="_blank" href="https://patreon.com/cyanidesugar3dp" rel="nofollow noopener">Patreon</a>! Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more! If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!_______________________________________

Chameleon - HueForge Print

Filament_of_imagination

This build plate rack was designed to complement the aesthetics of the X1C and look good beside it. The model snaps together without need for fasteners but you may use glue to permanently bond the pieces together. I used Bambu Lab matte light grey and black PLA for the base and nameplate, and Bambu Lab Silver Basic PLA for the front, back and top pieces. To match the P1 series, change the filament selection to black with white for the letters (each letter is an object). For assembly I would suggest sliding the nameplate to the front piece first, then snap the front and back pieces to the top piece upside-down, and finally snapping the bottom piece in place. Make sure you clean the support material out of the fastening slots completely for a nice fit.&nbsp;IMPORTANT NOTE: Order of assembly is very important, as by design it is virtually impossible to put the top piece in last. Lay the top piece upside down on a table first, then push either the front or back piece down on it, wiggling it a bit at the start with an ever so slight (like half a degree) inner angle. The ribbed part is actually lightly tapered. Push down with your palm and it should click in. Putting in the bottom piece last spreads out the assembly straight and completes the self locking.

Build Plate Rack

lighting

adh2013

Just a quick file I made in OpenSCAD for a Honeycomb Storage Wall panel sized for the A1 Minis plate.

Honeycomb Storage Wall 180x180 A1 Mini 

Tools

movies

gwenhidwy

**Update 1/4/2024**I added a lid.Note: The lid is not a real tight fit. It was deigned for a different version of these trays and I would need to make some changes in order for it to be real snug. Let me know if this is something you are interested in.&nbsp;**Update 1/9/2024**I created <a target="_blank" href="https://makerworld.com/en/models/132441#profileId-143573" rel="nofollow noopener">Bento Stax 2.0</a>, with larger sizes and more variety of compartments.&nbsp;**Update 1/15/2024**I created a new set of trays <a target="_blank" href="https://makerworld.com/en/models/140419#profileId-153021" rel="nofollow noopener">Bento Connex</a>. They can connect together as well as stack&nbsp;I was inspired by a remix of my Nesting Trays and redesigned my own models be similar but cleaned up some of the filets, as well as make it parametric, allowing me to make different sizes, including ones for the A1 Mini.&nbsp;These are stackable with the original nesting trays, and with themselves.&nbsp;Stay tuned for a larger size, coming soon!&nbsp;Please checkout some of my related models:<figure class="table"><table><tbody><tr><td><h2><a target="_blank" href="https://makerworld.com/en/models/140419#profileId-153021" rel="nofollow noopener">Bento Connex</a></h2></td><td><h2><a target="_blank" href="https://makerworld.com/en/models/132441#profileId-143573" rel="nofollow noopener">Bento Stax 2.0</a></h2></td><td><h2><a target="_blank" href="https://makerworld.com/en/models/16549#profileId-15418" rel="nofollow noopener">Nesting Trays</a></h2></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406440/2024-01-15_9192b32cf6679.jpeg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406440/2024-01-15_55152aa87cb39.jpeg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406440/2024-01-15_a3e840db7bf4b.jpeg"></figure></td></tr></tbody></table></figure>

Bento Stax

Functional and Useful

Stag 3D

<h3>How to play:</h3><ol><li>Setup the base on a flat surface and place the Tetra Balance block onto it.</li><li>Take it in turns with your opponent to place the blocks onto the Tetra Balance piece. You can place the blocks with one hand only and once you have chosen a bloke you cannot change it.</li><li>Repeat until the tower eventually falls. </li><li>If you cause the tower to fall your opponent wins. </li></ol>&nbsp;

Tetra Balance Game

gaming

j4ys0n

This is the honeycomb organizer that comes pre-loaded on some bambu lab printers but is scaled to 110% so that the small holes fit the bambu lab glue stick.

Honeycomb Organizer

favorites

Valority

A platypus colored in Bambu Studio. AMS Slots: 1. Fur 2. Nails/nostrils 3. Eyes 4. Beak/feet

Platypus

Animals

SavageLau

&nbsp;This simple tool is fast to print, and cost very little filaments, 0.80g each.This tool will help you clean and apply lube oil on the y , x, and z axis.&nbsp;y axis:<figure class="image image_resized" style="width:59.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368062/2023-12-10_d9887afdceb9d.jpg"></figure>X axis linear rail slots:<figure class="image image_resized" style="width:60.34%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368062/2023-12-10_aabf2a0a51199.jpg"></figure>Z axis linear rail slots:<figure class="image image_resized" style="width:60.28%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368062/2023-12-10_e3dd0712e2931.jpg"></figure>

A1 mini lube helper

3D Printer tools

slavik.mis.1984.ve4

Screw Top Lid Rugged Cylindrical Container Knurl Pattern.For the rest of the set go to: <a target="_blank" href="https://www.printables.com/model/641022-universal-rugged-knurling-pattern-cylindrical-cont" rel="nofollow noopener">https://www.printables.com/model/641022-universal-rugged-knurling-pattern-cylindrical-cont</a><a target="_blank" href="https://www.printables.com/model/593473-screw-top-lid-rugged-cylindrical-container" rel="nofollow noopener">https://www.printables.com/model/593473-screw-top-lid-rugged-cylindrical-container</a><a target="_blank" href="https://www.printables.com/model/642130-screw-top-lid-rugged-cylindrical-container-100-mm-" rel="nofollow noopener">https://www.printables.com/model/642130-screw-top-lid-rugged-cylindrical-container-100-mm-</a><a target="_blank" href="https://www.printables.com/model/643034-drill-bit-holder-container-knurling-pattern" rel="nofollow noopener">https://www.printables.com/model/643034-drill-bit-holder-container-knurling-pattern</a>Enjoy!

Universal Rugged Knurling Pattern Cylindrical Container

Petg

nolimit

tiny_rack is a eurorack rack project for DIYer with just starting DIY eurorack modular synthesizers.See full project (with power pcb) here: <a target="_blank" href="https://github.com/KevinKeWang/tiny_rack" rel="nofollow noopener">https://github.com/KevinKeWang/tiny_rack</a><ul><li>One-piece 3D printed, no splicing, no metal rails required.</li><li>Maximum current: +12V 1500mA, -12V 1500mA, +5V 6500mA.</li><li>Optional +3.3V 500mA for easy project prototyping.</li><li>Full load tested.</li><li>The +12V and -12V output ripple is less than 100mV under all load conditions.</li><li>Exposed M3 screw terminals for direct connection to the test power supply. Clamps can be directly.</li></ul>

biti workshop tiny_rack eurorack synthesizer case 2x44hp (powered)

Synth

snyperiflex

Compact and strong ammo box for storage or to take to the range. Do a test print first, the clearance between the rounds and the lid is tight, so the lid might not fit if your rounds are longer than the ones I tested with (Blazer 124, Lawman 147, Syntech 150). Let me know if I need to upload a model with more tolerance. * December 18th, 2023 - Updated models for slightly beefier locking tabs * December 24, 2023 - Updated box with slightly thicker rails, Updated lid to accomodate slightly longer rounds

9mm Ammo Box - Compact

IDPA

Jan 3D

Bambu Lab Storage System&nbsp;UPDATE 24.11.2023Now with new LID for Full Hotends here is the LINK:<a target="_blank" href="https://makerworld.com/de/models/72681#profileId-77205" rel="nofollow noopener">https://makerworld.com/de/models/72681#profileId-77205</a>&nbsp;This is a newly developed storage system for all the Bambu Lab printers X1C / P1S, /P1PThe goal was to store all spare parts as well as the glue stick and the Allen key in one box. This was realized as space-saving as possible.&nbsp;The dimensions of the closed box are: 181mmx126mmx32mm&nbsp;The following parts can be accommodated: - Four hotends with all accessories (silicone sock, holders for the thermister as well as the corresponding screws). - Four nozzle wipers + mounting screws - Spare filament cutter - Nozzle cleaner - Glue stick from Bambu Lab - Allen wrench supplied - three times each Lubricant Grease and Thermal Grease&nbsp;The two parts are not joined together, the lid is just put on. &nbsp;Im happy to adapt my design if you want something changed, just contact me and we can work something out.&nbsp;Also look at may other Storage Box:<a target="_blank" href="https://makerworld.com/de/models/47503" rel="nofollow noopener">https://makerworld.com/de/models/47503</a>

Anime

Audio

hueforge

Audio

comics

art

lighting

Tools

movies

Functional and Useful

gaming

favorites

Animals

3D Printer tools

Petg

Synth

IDPA

collection