mitchel949

3DeepPrinting

Don&#39;t Lose Your Head Fallout Sign&nbsp;Yes there is one similar already posted. But this one is much better. I designed this from scratch first in Adobe Illustrator and then in Fusion 360. &nbsp;Prints very easy with AMS.I always print signs at 0.28 and they look great.&nbsp;Enjoy.

Don't Lose Your Head Fallout Sign

wollip

Another great Model by Danny520 ( <a target="_blank" href="https://www.printables.com/de/@danny520_603661" rel="nofollow noopener">https://www.printables.com/de/@danny520_603661</a> ) Ich bin nicht der Ersteller dieses großartigen Modells und habe es auch nicht remixed.Ich habe keine Ahnung, warum ich es remixed teilen kann,jedoch nicht das Original.Ich würde lieber nur das Modell teilen und den Designer den Credit geben.

Humvee M998 PiP

minis

SmashD

If you are using the one-click 3MF file on Makerworld (aka the “print profile” in the top right), all appropriate settings have been applied to the print (PLA filaments)! Slice it, print it, done.&nbsp;&nbsp;If you are not using the one-click printing method, or are not using a Bambu printer, read on:<h4>Print Instructions (manual settings):</h4>print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;<h4>Filament Swaps:</h4><ul><li>Start with Black</li><li>At layer #9 (0.8mm) swap to Fire Engine Red</li><li>At layer #15 (1.28mm) swap to Beige</li><li>At layer #24 (2mm) swap to White for the rest.</li></ul><h4> Filaments I've used:</h4><ul><li>Black: <a target="_blank" href="https://amzn.to/486FCDo" rel="nofollow noopener">Extrudr PLA NX2 matt schwarz</a>*</li><li>Fire Engine Red: <a target="_blank" href="https://amzn.to/42yHYtu" rel="nofollow noopener">PLA+ Esun Fire Engine Red</a>*</li><li>Beige: Bambu Lab PLA Basic “Beige”</li><li>White: <a target="_blank" href="https://amzn.to/4blLxaA" rel="nofollow noopener">Extrudr PLA NX2 matt weiß</a>*</li></ul>&nbsp;Notes:<ul><li>*The used link is a so-called affiliate one. When you buy a product using this link, I will receive a small provision. The price itself does not change. Thanks so much for your support :)</li><li>I am not affiliated with the Coca Cola Company or any other license holder nor is this print an official release. It's just a fan and hobby project made at home and should not condone theft of copyrighted material and I don't want to get into even the slightest trouble because of that.</li></ul>

Coca Cola Coasters - Vintage (incl. Holder)

cocacola

Golub17

Update  I have accepted all valid criticisms of the stem model. Even though I tried to make the branches thicker and tested many types of supports, it was not enough. Therefore, I made a new remixed model with my own self-modeled leaves. These are printed on the bed (unlike the old ones in the air) and positioned afterwards using heat.I would like to thank you all for printing, sharing your pictures, and commenting. Now, let me address the licensing and give proper credit to the original creators: Rose (original) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/marsmathofficial" rel="nofollow noopener">marsmathofficial</a> on Thingiverse and published under CC BY-NC-ND 4.0 DEED, which means the model can be shared and distributed in its original form. DO NOT SHARE REMIXED VERSIONS OF THIS MODEL I am also sharing the original model; therefore, I am still respecting the CC BY-NC-ND license the original creator chose. Stem (remixed) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/richardtracy" rel="nofollow noopener">Richard Tracy</a> on Thingiverse and published under CC BY 4.0 DEED which means the model can be shared and distributed in its original form or remixed. Base (original) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/richardtracy" rel="nofollow noopener">Richard Tracy</a> on Thingiverse and published under CC BY 4.0 DEED which means the model can be shared and distributed in its original form or remixed. Vase - That's mine, made through MakeMyVase on MakerLab, nothing extra about it. Printing and processing instructions: Rose - should print as it is, i personally like the silk pla look. ;New updated stem (flat leaves) has no printing issues; Stem (old) - this is a tricky one, in an older post here by erin.wang, many had issues printing it. My remix addresses some of these by making the leaf stems thicker and painting custom supports, also, the stem is now longer and looks better in a vase. Print profile has fuzzy modifiers on leaves i personally like them that way. Print instructions: - use high-quality filament, which will prevent 90% of problems - if you encounter any issues, manually set the print speed to 50% (this gives layers more time to cool down) Post process instructions: 1. very carefully remove supports, start by small pieces from leaves and work your way down to the stem 2. carefully trim any excess material  3. use heat to remove stringing (i used a cheap filament your results may be better) and carefully heat the branches under leafs 4. pose leaves to a more natural position while the branches are heated Base - should print as it is, i personally like the fuzzy look. Now something about the rose model, i made myself one modification to it. And that is the hole at the bottom so the final gluing would be easyer. Sadly i cannot share this model with you here or anywhere since the original creator forbids sharing of a remixed model. But i can give you quick instructions on how to do it yourself, that far CC BY-NC-ND cannot reach. 1. Export the model from bambu studio (File - Export - Export all objects as STL) 2. Import in Blender (File - Import - STL) 3. Go to edit mode 4. Select the inner most ring on the underside (use select circle an maneuver around) 5. Press “S” to scale down (move your mouse to scale, click to confirm) 6. Press “E” to extrude (move your mouse to extrude, click to confirm) 7. Export the model from blender (File - Export - STL) 8. Add model to the bambu studio in the original rose profile Even better solution by <a target="_blank" href="https://makerworld.com/en/u/2175230856" rel="nofollow noopener">@tweaqr</a>In Bambu Studio Right click on the rose --> Add nagitive part --> cylinder Click OK to the message box Select Scale from the top toolbar and set the size to 4mm,4mm,4mm Select Move from the top toolbar and set the position to X 0mm, Y 0mm, Z-15mm

Rose with Stem (remix)

flower

mike.pasquariello

Here is a fun ornament I designed. It's designed to look like it's made of rope! If you use Polymaker Polyterra Army Biege, people won't be able to tell it's plastic from a distance! Just simply tie a ribbon or hook to it and hang it from your tree!

Mickey Mouse Rope Christmas Ornament

mickey 

chameko小廢物電波塔

The original design of nozzle (Hotends) comes from cHaOt166<a target="_blank" href="https://www.printables.com/model/488705-bambu-hotends-box-with-different-trays" rel="nofollow noopener">Bambu Hotends Box with different Trays by cHaOt166 | Download free STL model | Printables.com</a>&nbsp;Although there are many creators who have designed beautiful tool boxes. But there is no design that fully meets my needs. So I designed this so that some of the content can be personalized. I make full use of all available space. The cover is a simple tray that can place disassembled screws and parts.<img src="https://makerworld.bblmw.com/makerworld/draft/59515/2023-10-02_dad83e0c8b7df.jpeg">&nbsp;All parts require no support.Please choose whether to print plates 4, 5, and 6 according to your own needs.Brim may need to be added depending on the printer's status and environment. In my settings file, only Body uses Brim.<img src="https://makerworld.bblmw.com/makerworld/draft/59515/2023-10-02_4d40c88ec94de.png"> The lid has a simple structural design that can fix the lid.<img src="https://makerworld.bblmw.com/makerworld/draft/59515/2023-10-02_b9ec136c89fb5.jpg">&nbsp;Finally, there are two places that need glue, please refer to the photo.<img src="https://makerworld.bblmw.com/makerworld/draft/59515/2023-10-02_eaaa15ddbda6f.jpg"> Happy printing.

BambuLab Tool Part Box

printer

giamma933

Print at 100% infill with a layer height of 0.013mm with a base layer of 0.16mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Matte Dark Red Transmission Distance: 1.5PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 4Swap Instructions: ( all filaments are from Bambu)Start with BlackAt layer #6 (0.56mm) swap to Dark Red At layer #7 (0.56mm) swap to Yellow toughAt layer #9 (0.8mm) swap to Jade White for the rest.

Lord of the rings hue forge final

art 

Chipped Builds

Vintage Christmas Light Bulb Gift Box is a fun twist container box that you can fill up. The. base of the bulb does need supports but that's it. This is the first time I 3d modeled threads so that is why there are 2 cap versions. I printed the normal cap and it worked fine but everyones tolerances are different.