misko903

Icew33

Very beautiful and simple cat bookmark.<h4>More bookmarks on my profile</h4>

Cat bookmark

zákazky 

garden

SabreDesign

Modern easter bunny decoration. The model is 110 mm tall, can be scaled up to your liking. The inside of the model is hollow to save on filament.&nbsp;If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-09_3031dfb02454e.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-04_f1cfd27f8e9d5.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-02_bdab38c1e474e.png">&nbsp;&nbsp;&nbsp;

Easter bunny

Easter

j18nicoletti

This is a 3x1 gridfinity bin designed to store USB wall chargers with a North American style plug. The bin has holes on the underside for press fitting 6x2mm magnets if you so choose. It is 4 units tall, and has a lip so you can stack additional bins if you don't fill it up.&nbsp;You should be able to comfortably store 4 chargers in here, but might be able to squeeze a fifth in if they're small enough.&nbsp;Inspiration came from a model seen in this Reddit post, but the model on Printables has been deleted.<a target="_blank" href="https://old.reddit.com/r/gridfinity/comments/wkzsrk/2nd_drawer_pretty_much_done_ikia_alex/" rel="nofollow noopener">https://old.reddit.com/r/gridfinity/comments/wkzsrk/2nd_drawer_pretty_much_done_ikia_alex/</a>

Gridfinity USB Wall Chargers Bin

Gridfinity

3DPrintWolf

Greetings and welcome to my workshop.&nbsp;I’m going to show you my version model of Toyota's Parkingsign V.6&nbsp;!!!My sign’s STL files are ready for 3D printing. I have tested all my signs to ensure they meet my quality standards.!!! I hope you can use this one too, and leave a like or comment & rating.&nbsp;Your rating will help my model get more visibility and reach more people. It will help me create more free STL files.&nbsp;I appreciate your support for my model. If you like it or add it to a collection, please hit download to increase its visibility or share it with others :) Thank you very much!&nbsp;If you need a new sign or STL of line art, just PM me and I’ll try to make one for you and upload it as soon as possible.&nbsp;Sign Playtoz / 3dprintwolf

Toyota's Parkingsign V.6

cars

peterow

Mountain Range Reflection is a truly stunning piece that looks fantastic in any room!

Mountain Range Reflection Amazing Wall Art 

Deko

bringle

Have a couple LED remotes for two different LED strips and I wanted a way to store them rather then having them strewn on my desk. Made this simple model that holes two of them. I then used double sided tape to stick to the underside of my desk where I can access them easily.

Led Remote Holder

Home Office

Nakozen

A wee Gingerbread House to sit on your desk or shelf, or loop a thread through the included holes in the roof to hang from a tree, or elsewhere! Designed to be printed with a pause-at-height colour swap! Though I'm sure you could just paint the details after printing with just one colour! EDIT: New V2 files for a tighter fit, a seamless folding roof! =================== Included is a Frameless variant for those uninterested in the sprue card format (refer to photos for assembly help). If the fit is too tight, I suggest setting outer walls to print first in your slicer. You can make it EVEN TIGHTER by increasing the Z-scale by 15%.Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. Makes greatly appreciated, always glad to see them! Happy Printing!===================<h3>Interested in selling?</h3>All files are marked as non-commercial along with any remixes created from them, however licenses are available via Ko-Fi and Printables Clubs!If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships, or Printables Clubs!

Gingerbread House Kit Card

Christmas 

TomoDesigns

A creative way to make a big button where you can hang your clothes on. You only need to print the parts and a rubber band (or print the rubberband pieces <a href="https://www.prusaprinters.org/prints/122853-button-wall-hook-remix-thread" rel="nofollow">yourself</a>). Every make will be featured on my Instagram add your handle and follow me :) Check out <a href="https://www.instagram.com/tomo_designs/" rel="nofollow">my Instagram</a> if you want to see more designs like this or if you have questions!<h3>I made a tutorial video and instructables</h3><a href="https://www.instructables.com/Button-Wall-Hook/" rel="nofollow">Instructables</a> is here. Check out this video and you will see how I assemble it. And to know more about my work <3<figure class="media"></figure><h3>No support needed</h3>I hope you like it. I printed it out in matte black and advise you to do that too because it is beautiful.<h3>Rubber band or 3D printed thread</h3>You will need a rubber band that is 8 mm wide. It will be a tight fit but it works. It also works with a smaller width rubberband but it will be less clean.There is also a <a href="https://www.prusaprinters.org/prints/122853-button-wall-hook-remix-thread" rel="nofollow">remix</a> where you can 3D print these pieces without having to need the rubber band. <h3>How to mount</h3>You can use a screw to mount it to the wall and you can turn the button on the wall because of the threading on the inside of the button and outside of the mount. <h3> </h3><h3> </h3>

Button wall hook

Household

3DNestCZ

UPDATE: 2022-05-04<ul><li>replaced model of eyes with fixed position (thank you: PinkSpeedy!)</li><li>uploaded flat eyes model (without holes for wiggle stickers)</li></ul>--Very easy print and assembly with no supports and fitting all common printer beds. All you need is to print all parts, glue them together and finish the monster with one 16mm and two 12mm wiggle eyes.No need for supports or rafts.&nbsp;

Pen Box - Monster F

kids

3DMON maker

I like MihaiDesigns' idea and the P1P Armor Modplate. This is a remix of Bambu Lab AMS Stacking Stand with Armor Modplate style.All gaps for assembly are intentionally very small. If it's difficult, please use a tool like a rubber mallet.&nbsp;Updated on Jan. 7th, 2004- The wall extension(Riser) is 20mm taller than the previous one, so the lower AMS top lid can fully open without the need to hold it.- Also, you can add one more bracing when you use the wall extension for more rigidity.&nbsp;Pins are separate parts because they need more strength, so at least 50% infill and 4 wall loops are recommended.* If you want to push the lower AMS further back, please use Pin4 v2 & Pin4-Spacer instead of Pin3 v2.* All pins are redesigned for better strength. Thanks for the great idea! <a target="_blank" href="https://www.printables.com/@djwhouse" rel="nofollow noopener">@djwhouse</a> Now, pins can be printed horizontally.<ul><li>Pin1 v2(13mm) & Lock : for assembling bracing parts.</li><li>Pin2 v2(40mm) : for adding side wall extensions.</li><li>*Pin3 v2(20mm) : for joining bracing assembly and side walls.</li><li>*Pin4 v2(50mm) & *Pin4-Spacer : (Deeper) for joining bracing assembly and side walls.</li></ul>&nbsp;If you need a build plate holder version, please check the link below.<a target="_blank" href="https://makerworld.com/en/models/62232#profileId-64745" rel="nofollow noopener">https://makerworld.com/en/models/62232#profileId-64745</a>&nbsp;

AMS Stacking Stand Remix

AMS Upgrades

SPStudio

Extruder AMS Filament Pull Back Fix

X1C upgrade

Stag 3D

<h2>Locky the bookmark</h2>Print in colour or print and paint.&nbsp;Minimal supports and assembly required. Simply print and push fit the base into each section.

Locky the bookmark! 

Bookmarks

Adam L

Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one, you&#39;ll need to buy a kit from aliexpress or some local retailer. Note that these are NOT official BondTech CHT nozzles, but a chinese clone for the X1/P1P. I&#39;d buy official ones if I could to support BondTech, but they haven&#39;t made anything available. I&#39;ve included a picture of the nozzle as part of the image so nobody gets confused.Change log:<ul><li>Added Overture Digital Blue TPU (7/30/23). VFR = 6.5 (up from 3.75 in normal nozzle)<ul><li>This needed a lot of tuning to produce good test Eevee prints.</li></ul></li><li>Added Overture Clear HighSpeed-TPU (8/4/23). VFR= 12 mm^3/sec. Do not confuse this with regular Overture TPU!</li><li>Added Ninjatek Cheetah Grey TPU (8/7/23). VFR= 6.2 mm^3/sec.</li><li>Added Inland White TPU (8/7/23). VFR= 5 mm^3/sec.</li><li>Added Bambu Black HF TPU (5/27/24).  VFR= 12 mm^3/sec. </li></ul><h4> </h4><h4>What this is:</h4>This is a collection of all of my TPU filament profiles for all filaments I&#39;ve used of this type. I happen to have a decent amount of <a target="_blank" href="http://referrals.californiafilament.com/rV8091rv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxNTg0NzYyODA5fQ%3D%3D" rel="nofollow noopener">California Filaments</a> because I&#39;ve found that brand works well with this printer, and you can push the flow rates higher with it than some others.I will update it as I tune new filament brands and colors. They are generally tuned for flow rate, pressure advance, and temperature and volumetric flow limits and overrides. They&#39;re a good working starting point for anyone struggling with a filament. I&#39;ve also tuned other types of filaments (see <a target="_blank" href="https://www.printables.com/@AdamL/models" rel="nofollow noopener">my models here</a>) and you should find, by category:Standard Nozzle (0.4 mm , Hardened Steel, should work for P1P/P1S as well)<ul><li><a target="_blank" href="https://www.printables.com/model/457260-tpuflexible-tuned-x1c-print-profiles-for-bambuorca" rel="nofollow noopener">TPU / Flexibles</a></li><li><a target="_blank" href="https://www.printables.com/model/457284-panylon-tuned-x1c-print-profiles-for-bambuorca-sli" rel="nofollow noopener">Nylon/PA and PACF variants</a></li><li><a target="_blank" href="https://www.printables.com/model/457321-pc-tuned-x1c-print-profiles-for-bambuorca-slicer" rel="nofollow noopener">Polycarbonate &amp; Polycarbonate-CF</a></li><li><a target="_blank" href="https://www.printables.com/model/457248-pla-tuned-x1c-print-profiles-for-bambuorca-slicer" rel="nofollow noopener">PLA / PLA + / Silk PLA</a></li><li><a target="_blank" href="https://www.printables.com/model/457271-absasa-tuned-x1c-print-profiles-for-bambuorca-slic" rel="nofollow noopener">ABS / ASA</a></li></ul>CHT-Nozzle (0.4 mm , Brass)<ul><li><a target="_blank" href="https://www.printables.com/model/540552-chtnozzlepla-tuned-x1c-print-profiles-for-bambuorc" rel="nofollow noopener">PLA</a></li><li><a target="_blank" href="https://www.printables.com/model/539704-chtnozzlepetg-tuned-x1c-print-profiles-for-bambuor" rel="nofollow noopener">PETG</a></li><li><a target="_blank" href="https://www.printables.com/model/542058-chtnozzleasaabs-tuned-x1c-print-profiles-for-bambu" rel="nofollow noopener">ASA</a></li></ul><h4> </h4><h4>How to use:</h4>These 3MF files are designed for use in Orcaslicer/Bambuslicer, but will work best in Orcaslicer, because it supports using a fixed pressure-advance value in the slicer.<ul><li>Load the 3MF file for the filament of your choosing. Files are named as &lt;Brand&gt;__.3mf.</li><li>(optional, recommended): Save the filament and/or print presets for your own use to your user presets for future use.</li><li>Remove the calibration cube dummy object and put your desired object in.</li><li>Print! But, turn off flow calibration option in your prints! The more reliable PA value stored in the filament profile will be used instead, and you can skip the wasted startup time, too!<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000015527/design/5d48e88c-c9d0-4192-99e1-d861dc6cdb0a.png"></li></ul></li><li>If you want to use these in Bambu slicer, you won&#39;t get the PA values applied automatically sadly, and you&#39;ll have to do that with a <a target="_blank" href="https://forum.bambulab.com/t/flow-calibration/892/15" rel="nofollow noopener">manual GCODE in the filament&#39;s start GCODE</a>. This is really annoying to do for each filament, but it does work. However I suggest you try Orcaslicer for this reason.</li></ul>&nbsp;<h4>Important TPU notes:</h4><ul><li>TPU is pretty sensitive to lots of variables, so these profiles may have more overrides than you are used to. Additionally, in your slicer layer height and Classic vs Arachne slicing can produce significant differences. I prefer layer heights of 0.16 or 0.2 mm and Classic slicing mode, as it seems to produce slightly better results.</li></ul><h4>Important notes:</h4><ul><li>These profiles are tuned on an X1C, with a brass CHT-style 0.4 nozzle installed, for use with a range of layer heights. If you have a different nozzle size or nozzle kind (steel/brass), these will not be good profiles. See my the links above for standard nozzles.</li><li>Each 3MF also contains some of my own optimized settings for 0.16 mm prints, which I typically use, but these tuned filament profiles are designed/tuned to work across a variety of different print profiles.</li></ul><h4>Background:</h4>I use the <a target="_blank" href="https://github.com/SoftFever/OrcaSlicer" rel="nofollow noopener">Orca Slicer </a>variant of Bambu&#39;s slicer because it offers finer-grained control over the slicing process and makes tuning and using tuned filament profiles much easier than Bambu&#39;s official slicer, which lacks good calibration routines for some of the most important variables in good printing: flow rate, pressure advance, and temperature and volumetric flow limits.This is particularly true for Bambu&#39;s Pressure Advance (<a target="_blank" href="https://github.com/bambulab/BambuStudio/issues/348" rel="nofollow noopener">they incorrectly call this “flow”</a>) calibration, which forces you to run it every time and is unreliable, particularly on the popular textured PEI surface.Each of these profiles has been tuned for:&nbsp;<ul><li>Flow rate (aka extrusion multiplier)</li><li>Pressure advance (aka linear advance)</li><li>Temperature (with temp towers)</li><li>Volumetric flow limits (my settings are a little conservative based on printing the max volumetric flow rate calibration inside Orcaslicer)</li><li>Overrides (I typically try to avoid using these unless I have to)</li></ul>