mn_3dlab

cartyski

Struggling to open jars of all shapes and sizes? Say goodbye to stubborn lids with this jar opener designed to fit them all!

OPENSESAME3000 - Jar Tool

Handy

NotUrTypicalUserName

Introducing the &#34;Memory Lantern&#34; – Illuminate Your Cherished Memories  &nbsp;Illuminate the cherished memories of a loved one with the Memory Lantern, a beautifully designed keepsake that not only enhances your decor but also keeps your precious moments in the light, literally! This lantern isn&#39;t just a decorative item; it&#39;s a beacon of the love and moments shared with those closest to your heart.&nbsp;Fully Customizable ExperiencePersonalize your Memory Lantern uniquely! Insert your favorite photos transformed into stunning lithophanes that glow with a beautiful inviting light. Use the embedded text tool in Bambu Studio to add heartfelt messages or names, making each lantern truly one-of-a-kind.<figure class="image image_resized" style="width: 58.44%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454453/design/2024-05-05_14f94f2a4a448.png"></figure>Simple Setup Process<ul><li>Wireless Light Source: We recommend using this efficient and easy-to-install LED light source <a target="_blank" href="https://www.amazon.com.be/gp/product/B078HR4X9N/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1" rel="nofollow noopener">available here</a> (for cold white and with a remote) or <a target="_blank" href="https://www.amazon.com.be/gp/product/B07SD3T8M1/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1" rel="nofollow noopener">here</a> (for a warm white and no remote). The topof the lantern can be removed easily to turn on the led.</li><li>4 Lithophanes: Convert your photos into lithophanes by ensuring they are in portrait orientation and measure 10cm x 13cm (3.94 x 5.12 inches). Upload your pictures to <a target="_blank" href="https://itslitho.com/" rel="nofollow noopener">It&#39;s Litho</a> and use the default settings provided for optimal results. Repeat this for a total of four unique lithophanes. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454453/design/2024-05-04_314a9a0f9ba5d.png"></li></ul>&nbsp;<ul><li>Printing Your Lithophanes: Download the Generic lithophane profile from this page and replace the blank litho with your own, and print. For the best definition, print your lithophane standing up. You can print multiple lithophanes simultaneously to save time.</li></ul>&nbsp;Additional Customization Options<ul><li>Decorative Charms: Customize further with charms to hang on each corner of the lantern. A classic heart charm is included, but feel free to add other shapes and symbols that resonate with your personal story. You can use the Text tool to customize the heart too !</li></ul>The Memory Lantern is more than just a gift; it&#39;s a lasting memory capsule that brightens any space with personalized touches that speak directly to the heart. Great for any occasion, perfect for Mother&#39;s day, let the Memory Lantern light up your life’s best moments!

Memory Lantern – An Illuminated Lithophane Holder

Mother's Day

Spike_Mix

Dimensions:<ul><li>5 cm diameter</li><li>4 mm height</li><li>0.5 mm per level (8 levels)</li></ul>Print settings:<ul><li>Layer height: 0.1mm</li><li>Infill: 15%</li><li>For non multimaterial printers you&#39;ll need to pause the print every 5 layers (1 level if you keep the layer height at 0.1mm) and swap the filament</li><li>For multimaterial printers the 3mf file I uploaded has the color changes already set</li></ul>I used 3 colors, starting with a dark wine color, then white, and then a light pink.  -------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;To legally sell PRINTED models, you may obtain my permission through this link: <a target="_blank" href="https://www.patreon.com/SpikeMix3D" rel="nofollow noopener">https://www.patreon.com/SpikeMix3D</a>

Floral multi color mandala earing

Earings

MiMa3D

Please enjoy a delightful combination of nature-inspired artistry and 3D printing innovation: a bouquet of tulips gracefully nestled within a 3D-printed vase.&nbsp;Designed for simplicity and ease of assembly, the tulip flowers and stems have been sliced separately, eliminating the need for multi-printing and ensuring faster print times. This also adds an element of fun, allowing you to mix and match colors to your heart&#39;s content.&nbsp;The vase is optimized for lightweight construction and quick printing, however, please note that it&#39;s not intended to hold liquids, so refrain from filling it with water. Filling the vase with old purge poop is a great way to use up print waste and help hold up the stems and leaves.&nbsp;Each stem is straight with a flat D section, enhancing print quality without compromising the bouquet&#39;s visual appeal, as most of the stems remain hidden beneath the flowers and leaves.&nbsp;If you&#39;re interested in expanding your bouquet with additional flower varieties, feel free to leave your suggestions in the comments section.&nbsp;Enjoy the creative process and have fun assembling your personalized bouquet of 3D-printed tulips.

Bouquet Of Tulips

decor

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.

Master Sword Pen

Office

ME STUDIO

[FREE] MEOWTH X CHRISTMAS KEY CHAIN&nbsp;Please share with me your printing image. By doing so, you will have the opportunity to receive special printing files such as Pokemon character coasters, keychains, and more.Thank you!&nbsp;If you love my works, please come to download a set of 6 key chain, check out my 3D models library.Dimensions: 65 mm diameter 4 mm height&nbsp;This model is for private use only! Welcome to join my Patreon, you can get monthly models and a welcome package.<a target="_blank" href="http://patreon.com/MESTUDIO" rel="nofollow noopener">http://patreon.com/MESTUDIO</a>

[FREE] MEOWTH X CHRISTMAS KEY CHAIN

Keychains

Studio 727

<h3>UPDATED DESIGN! FITS ALL SIZE PLATES!</h3><h3>USE MY DESIGNER PROFILE FOR THE MOST CURRENT REVISION!</h3>Yet another plate caddy..This is my 5-slot plate holder featuring offset slots for easy identification, and a large base with 45° storage makes it very stable.Pictured in Bambu PLA Matte Ash Gray. See my A1 Mini Plate Caddy <a target="_blank" href="https://makerworld.com/en/models/83653#profileId-89351" rel="nofollow noopener">here</a>!<h3>Enjoy, and please boost 🚀 &amp; rate! ⭐⭐⭐⭐⭐</h3><h2>Thank You! 🙂</h2>

Build Plate Caddy, Plate Holder, X1 P1 A1 & Mini!

Printer

luckyluc.64

This is another solution to the AMS filament mouth abrasion and a system to smooth the transfer from the spool to the AMS. I tried the clip-on V2 button thing, but it's unstable. I noticed some did add a PTFE, and I thought that was a stroke of genius. Also, some have an excellent bracket design that gives the filament a shallower angle of attack when getting in the AMS. Well, I did design that one that gets all the good stuff and is stable. I have been using in (4) AMS for over 2 months, and I have no issue, no sign of premature abrasion. It did resolve the spool jerking and jumping.&nbsp;I use a (PTFE) Teflon tube 2 bore x 4 OD x 50mm and print it in ABS and PETg. It is somewhat tight at the first insertion on the AMS but stable. It is tight with a new spool but works well. I thought the PTFE could be shutter, but it works well. Why fixing-it? It int broken… Yet.-----------All right, after 30 days of being out there and doing very well, I decided to bring it to another level,Voici, the soon-to-be-famous the v4,0n.Get ready for the blah blah blah about it;&nbsp;Updates: It has the best spool clearance, is taller, has a greater filament radius, has a slimmer nose, does have space for a large desiccant box, allows up to 18mm button, Slimer and more clearances for the PCB.It's close to the V3.0 but doesn't have the -2.5-degree backward Improved spool space.&nbsp;I tested it with ABS, and it works as expected, but I recommend using BBL Transparent PETg.Do Not use PLA. Or only if it's a really good quality, tough one, and you went to the post-process of heat treatment. Put 6 walls, 6 tops and bottoms layers. I think it's asking for trouble using PLA. I should try PLA-CF… That could be fun, Right?&nbsp;Enjoy, and have a happy new year.

AMS Smooth PTFE (update December 23)

Kyaenos

i've designed a simple funnel that fits the silica dryer spool V2. it's never been easier dry out our silica gel&nbsp;Here you can find the silica dryer spool V2<a target="_blank" href="https://makerworld.com/en/models/53312#profileId-55088" rel="nofollow noopener">https://makerworld.com/en/models/53312#profileId-55088</a>&nbsp;enjoy!