michal.schwarz

schiko

<h2>Attention!</h2><blockquote>It seems like the actual version of Fusion has problems with projections inside some sketches. This problem is definitively new since one of the last updates. At the moment I don&#39;t have the time to re-construct it. But hopefully it will work after the next update of fusion again. In a few weeks I can try to re-design it, but at the moment I don&#39;t have time for that.  (2024-04-26)</blockquote>&nbsp;I uploaded many different sizes, but you can also make your own size using the uploaded &#34;parametric Gift Box.f3d&#34;.You need <a target="_blank" href="https://www.autodesk.de/products/fusion-360/" rel="nofollow noopener">Autodesk Fusion 360</a> to set the parameters. It&#39;s free for private use.<h3>Customization</h3>For those who are not familiar with Fusion here are very detailed instructions (see also the uploaded screenshots):Open the file Parametric Gift Box.f3d in Fusion 360.<ol><li>Click Modify …</li><li>… and Change Parameters</li><li>In the following dialog you can edit the parameters. If the recalculation of the model fails just use the old value. Probably some other values need to be decreased (e.g. radius). Please use only reasonable values.</li><li>Click File …</li><li>… and 3D Print</li><li>In the following dialog click on Select …</li><li>… and chose the component “box” in the browser on the left !!!</li><li>Refinement should be high and Send to 3D Print Utility unchecked. Click OK and select a destination to export.</li></ol>Repeat steps 4-8 for all four parts (box, lid, ribbon, ribbon_bow)!&nbsp;<h3>Print Instructions</h3><ul><li>3 walls</li><li>no support</li><li>larger / longer parts may need a brim</li></ul>I used PLA with .2mm layer height.&nbsp;If you have any hints or suggestions please let me know.I would love to see photos of your gift boxes …

Parametric Gift Box (Fusion 360)

Krabičky

If you want to use your A1 (mini) without AMS lite the cable and the PTFE tube wobble around.Use these clips to fix them.I use two of them …&nbsp;Update 2024-01-15: Due to request I uploaded a version for 2 PTFE tubes and the cable.&nbsp;Update 2024-03-13: Added a tighter version for those who think the clips are too loose. In my print profile the normal version is on plate 1 & 2 and the tighter version on plate 3 & 4

Krabičky

Printer