MichaelDot

dylanfonz

Before my R1 even arrived, I envisioned a stand that maintains the device&#39;s full functionality and boasts a sleek appearance to enhance my desk setup.&nbsp;I recommend printing with a minimum layer height of 0.2mm for optimal results. A setting of 0.16mm strikes a perfect balance, offering excellent quality while ensuring a relatively quick print time. Don&#39;t forget to enable the Arachne wall generator; it significantly improves the speaker grill&#39;s detail and overall finish.&nbsp;Dont have a printer? No problem! I will print one for you here: <a target="_blank" href="https://fonzfabrications.com/products/burrow" rel="nofollow noopener">https://fonzfabrications.com/products/burrow</a>

Rabbit r1 Stand

r1 hack

Printzee

<ul><li>For the Colored profile: https://makerworld.com/en/models/466526#profileId-375545</li></ul> ------------------------------------------------------------------------------------------&nbsp;Custom keycaps design with infill pattern quick YT short for the design process:  <figure class="media"><oembed url="https://www.youtube.com/shorts/oGBkGEh9kT0"></oembed></figure>

Infill Custom Key Caps

compute

Emvi 3D

180° Print in Place hinges

building

Majkl789

This credit card size radius gauge fits is small and fits to wallet or pocket.From 1mm to 18 radius and some basic hexagons (8,10,13,17,19).Simple design, simple use.I used ASA, but every material is possible, not neccesary multimaterial for double color, Color is changed in layers.

Credit card Radius gauge

tools 

toolmantim313

A multicolor file for your Meta Quest 3 headset so you can store it on a wall. I incorporated a flange so it helps keep the headset from sliding off to the side. Printed in PETG.&nbsp;Check out my wall mount for controllers with added grips and strapshttps://makerworld.com/en/models/113564#profileId-122043

Quest 3 Headset Wall Cradle

quest

Ken Mills

2D art display for an original Game Boy DMG-01 patent drawing.&nbsp;Now includes a version for the <a target="_blank" href="https://us.store.bambulab.com/products/bambu-cmyk-backlight-board" rel="nofollow noopener">Bambu CMYK Backlight Board</a> and frame.&nbsp;Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well).&nbsp;The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in.&nbsp;Important:<ul><li>Be sure to allow the print to fully cool before removing from the build plate to avoid warping it while still warm.</li><li>If you are having trouble printing thin lines or the slicer preview, make sure the Arachne wall generator is enabled.</li></ul>Before printing the included frame, check out my new lightbox option: <a target="_blank" href="https://makerworld.com/en/models/145904" rel="nofollow noopener">https://makerworld.com/en/models/145904</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/145904" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/457765/2024-01-27_34196d0c3075.jpg"></a>&nbsp;Check out my other patent art here: <a target="_blank" href="https://makerworld.com/en/u/3703368285/collections/18978" rel="nofollow noopener">https://makerworld.com/en/u/3703368285/collections/18978</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/u/3703368285/collections/18978" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/457765/2024-01-27_1295b19d277ea.webp"></a>

Game Boy Patent Art

decor

Bassahaulic

A physical reference print for M2, M3, & M4 threaded inserts and screws. Printed with a .2mm Nozzle for text clarity and accuracy. All inserts are <a target="_blank" href="https://www.amazon.com/stores/ruthex/page/5D1D409E-9786-4A6A-8198-85CA0A3507FD?ref_=ast_bln" rel="nofollow noopener">Ruthex on Amazon</a>. (<a target="_blank" href="https://www.amazon.com/gp/product/B0C4GDBXML/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1" rel="nofollow noopener">Except for the M3 Shorts</a>) LINKS to inserts and screw packs: <a target="_blank" href="https://www.amazon.com/stores/ruthex/page/5D1D409E-9786-4A6A-8198-85CA0A3507FD?ref_=ast_bln" rel="nofollow noopener">Ruthex Inserts Amazon Store Link.</a> <a target="_blank" href="https://www.amazon.com/gp/product/B0C4GDBXML/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1" rel="nofollow noopener">M3 Short Inserts (M3x3x5mm) Amazon Link.</a> <a target="_blank" href="https://www.amazon.com/gp/product/B0BLCGY7V4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow noopener">M2 Button Head Screw Kit.</a> <a target="_blank" href="https://www.amazon.com/gp/product/B09MYDQCXX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow noopener">M3 Button Head Screw Kit.</a> <a target="_blank" href="https://www.amazon.com/gp/product/B0BYHBSRWD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow noopener">M4 Button Head Screw Kit.</a>

Threaded Insert & Screw Reference Tool

Solder

3D_Printing_Enjoyer

Your mint died again because you forgot to water it… We all have been here many times. It's sad but you have to move on, speaking of moving on… Move yourself to your slicer and print this beautiful pot, i know you want it! (or at least you need it) I almost forgot! Would you like to have a little handy water indicator for your little handy auto watering flower pot? Good news for you! All you need is toothpick, some super glue and you are ready to go! If you want to make it there are 3 extra elements you need to print, good luck!

Modern spherical flower pot with water reservoir and water level indicator

pots

WagZPrintZ

A melted snowman.. you know the gig.. &nbsp;You'll need to heat the edges to give it that “melted” look! &nbsp;Scale to whatever size you wish, but keep thickness the same as original so it bends easier once heated!

Melted Frosty

connor

mladen88

21.06.24: added smaller Version that fits on A1 mini&nbsp;I made this Container/Storage for the cable organizer/winder by squinn. This size fits 7 medium sized cable organizers or in my case 5 medium, 1 large and 1 small.&nbsp;Link to the Cable Organizer/Winder by squinn: <a target="_blank" href="https://makerworld.com/de/models/13849#profileId-13650" rel="nofollow noopener">https://makerworld.com/de/models/13849#profileId-13650</a>&nbsp;I have made a second version with Honeycomb Pattern: <a target="_blank" href="https://makerworld.com/de/models/80050#profileId-84974" rel="nofollow noopener">https://makerworld.com/de/models/80050#profileId-84974</a>Skadis version: <a target="_blank" href="https://makerworld.com/en/models/170648#profileId-187318" rel="nofollow noopener">https://makerworld.com/en/models/170648#profileId-187318</a>

Storage Box for Portable Cable Organizer

organize

MEAF designs

Say bye to boring afternoons with this amazing maze game! This will not only challenge your solving capabilities but also your collaboration and coordination skills with other people.&nbsp;It consists of a game for two people, where the objective is to take the marble from the initial point to out of the board but you must do it by pulling the corners through a rope to tilt the board and take it through the entire route. <figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_4crfxnliq8st.gif"></figure>&nbsp;&nbsp;Once you achieve it, you can increase the difficulty by changing one of the ropes and pulling in a cross, or trying to do it in the shortest possible time.&nbsp;<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_tcqmrkplsgno.png"></figure>&nbsp;I have designed this for a 6mm ball bearing, and the max build volume of an ender 3 or similar. so you will be able to print it in almost any printer&nbsp;I´ve made 2 levels: <ul><li>level 0 = easy to achieve, with little travel. to familiarize yourself and learn </li><li>level 1 = with more travel and possible paths. ideal to compete and improve </li></ul>&nbsp;and I'm working on an even more difficult one, let me know if you'd like it. &nbsp;every level starst at the circular wall (there is only one in each), and you have to take the marble to the path until it leaves the board.if you achieve both levels you can use them in other ways, for example starting at each of the corners and taking the marble to the official start or official exit. doing so they practically become 3 versions each&nbsp;you will need:Printed parts1 - game board4 - poles1 - maze of any level you want&nbsp;Not printed parts4 - rope sections of 30cm each (you can use whatever rope you have on hand, from a shoestring to paracord. just make sure you don't use fishing line and pretty much anything can work)&nbsp;1- hot glue gun, 3D gloop, or any glue of your choice for pla or printed material&nbsp;to assembly you just need to glue the poles to the board, and then pass the rope through them to tie the maze at the other end. you can check the pdf for more datailed instructions. &nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for board and holders. 0.2 for mazeNozzle diameter: 0,4mm or 0,6mmInfill: 12-15%Perimeters: 2Support: noif you want a multi color maze just insert a filament change at: 1mm&nbsp;&nbsp;you can check all my other designs here<a target="_blank" href="https://www.printables.com/@dgoalva" rel="nofollow noopener">dgoalva | Printables.com</a>&nbsp;&nbsp;&nbsp;

Party Maze challenge

game

SPStudio

<h4>I update, revise and improve my design for my fixes very often. Please only use my Print Profile (Labelled as Designer or SPStudio) to ensure this fix is updated & work well. Profile with Non-Designer tags may be of poor functionality or non updated model.</h4>Click on Like if this model helped you in some way. It is very important and will help increase the exposure of this design to more people who might need it. Cheers!&nbsp;<blockquote>AnnouncementNew and Improved V2 Versions for the Ams Buffer Fix <a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">Before Buffer</a> and <a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">After Buffer</a> have just been released. Do check them out in my profile to see what are the improvement. Thank you for your continuous support.<figure class="image image_resized" style="width:33.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2023-12-21_db335e9276f41.jpg"></figure></blockquote><h4> </h4><h4>Here is behind the scene on how i make and test my fix, after i use this method then i proceed to laser alignment before finalizing the fix. So here is how accurate my fixes are. Even during moving. Cheers to actual precision…</h4><figure class="media"><div data-oembed-url="https://youtube.com/shorts/3yoLAQFka4g"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=3yoLAQFka4g"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/3yoLAQFka4g" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure><h2> </h2><h2>Introduction</h2>Failed to pull back filament error can be caused by multiple different variables & factors. This is a part of an series of Ams fixes that i have designed which can complement each other when used together. I do suggest you install all my fixes together for the 0ptimal effect to help your filament travel properly across the entire system which in turn can help improve, reduce or remove any potential Ams errors.&nbsp;I have grouped all fixes into their respective Collection for ease of searching what to install.&nbsp;V2 Collection are improvements done on the shortcoming of V1 Collection. Feel free to try V2 Collection and if it doesn't work properly then you can try the V1 Collection. You can easily find each of the Collection by clicking on the Collections tab on my profile.&nbsp;Unfortunately there isn't a single fix that can 100% work for everyone. What works for others, may not work for you but my fixes is definately a great place to start and have worked for majority of the users. My fixes are precisely measured then modelled. A Proper Fix would have the highest chance to reduce or solve the error.&nbsp;<figure class="image image_resized" style="width:81.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-09_cd9c426e40212.jpg"></figure><h2> </h2><h2>If you are too bored to read the entire lengthy write up explaining the need for this fix, here is the TL:DR.</h2>&nbsp;What is this? Ams Buffer Ptfe Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder. Its design is accurately measured to let the Ptfe tube be as level as possible at the Ams buffer to allow the most smooth, least amount of friction and pressure for the optimal angle to go into the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.&nbsp;&nbsp;Who needs this fix? I believe that anyone with a Ams would benefit from this fix / enhancement regardless of do you have any problem or errors with the Ams / Printer. This will allow your Ptfe tube to be nearly 100% straight (laser and manually measured) when it enter or exit the Ams Buffer. In theory, there are only advantages and benefits after installing. There are literally no disadvantage to this fix.&nbsp;&nbsp;Have this fix been tested?This fix have been tested for on 1 X1C, 1 P1P and 2 P1S for 92000 retractions.&nbsp;&nbsp;Why use this fix?This is EZ to print but yet its very precisely measured and designed. I have taken measurements down to 0.10 degree (measuring the outgoing angle out of the buffer) despite stating this fix as nearly 100% straight because there could be as small as maybe below 1mm deviations with every single machine due mass production. &nbsp;The fix will hold the Ptfe Tube level with the Ams Buffer to allow the filament to pass through with a smooth movement with the least amount of friction. The accuracy is the main point in this fix.&nbsp;&nbsp;<h2>Important Notes:</h2>Note 1: This fix is designed to still allow you to able to use pretty much any avaliable Ptfe tube removal tool so you can still remove your Ptfe tube if you want to replace it or for whatever reasons. Note 2: Hydra or Non Modified Ams can all use and benefit from this fix.&nbsp;Note 3: <a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">If you are using a rear spool, please check out this version. https://makerworld.com/en/models/85989</a>&nbsp;&nbsp;&nbsp;<h2>What Mod / Fixes / Enhancement do i offer?</h2>Please don't download the wrong one. Only those in the photos below is designed by me who painstakingly took a lot of time to measure carefully and design just to get it working. #SupportOriginal Love you guys for all the support so far!&nbsp;- <a target="_blank" href="https://makerworld.com/en/models/47982" rel="nofollow noopener">Ams FIX Failed To Retract Filament Error (a preventive measure and solve the bay 2 and 3 error and prevent bay 1 and 4 to have any possibility of having an error due to tension and friction)</a> (Updated design on the 2nd photo below, try 1 then if it doesn't works properly for you then install the other one.)&nbsp;<figure class="image image_resized" style="width:74.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_2e40f9b49d622.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/56906" rel="nofollow noopener">(BRAND NEW) Ams Filament Pull Back Fix V2 Upgraded - Completely New Design Upgrade For Ams Filament Pull Back ERROR! Precisely Measured</a>&nbsp;<figure class="image image_resized" style="width:75.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_9c729f1a3501a.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/52782" rel="nofollow noopener">- Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:75.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_14c8811c47696.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">- V2 Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:76.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_6194006084695.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/53037" rel="nofollow noopener">- Ams Fix - Stack the Ams on tp (Using a carefully measured holder to hold the Ptfe in a curved angle that will allow filament to go through with the least possible amount of friction when the Ams is stacked on tp of the printer)</a>&nbsp;<figure class="image image_resized" style="width:77.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_e6ff2df6c7873.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/58543" rel="nofollow noopener">- Ams Buffer Ptfe Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder.</a>&nbsp;<figure class="image image_resized" style="width:78.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_f95cf24ce5c9e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">- V2 Ams Buffer Right Ptfe Guide Mount - The Fix For Failed To Pull Back Filament a newly improved fix designed to replaced the V1 This will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder. EZ Installation. No screws needed!</a>&nbsp;<figure class="image image_resized" style="width:79.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_6ddf689393292.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/63021" rel="nofollow noopener">- Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:82.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_4c9e59fa5529e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/103987" rel="nofollow noopener">- V2 Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:81.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_69d2ccb8ac279.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/67779" rel="nofollow noopener">- The Smooth 4 Way Splitter. Look No Further. Combined with Ams Hub Lite together with this small attachment, you will have the Smooth 4 Way Splitter.</a>&nbsp;<figure class="image image_resized" style="width:83.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2023-11-19_96f9eed020e9b.gif"></figure>&nbsp;<h2>Technical Write Up</h2>Friction - The cause of most of the Ams filament failed to retract problem. Bends or pressure on the shape of the Ptfe tube in turn creates a lot of friction, as the Printer and Ams is equipped with multiple sensors, these friction will cause filament not passing through the Ams to the printer smoothly and thus causing the Ams Failed To Retract Filament Error and similarly related errors.&nbsp;&nbsp;So what is the possible solution to the problem? Firstly we need to reduce friction for filament passing through Ptfe tubes? Simple! If we optimise the angle of the Ptfe it will allow the filament to enter and go through the Ams buffer with the least amount of friction and pressure.&nbsp;&nbsp;So what i have created to solve the problem? Using mutiple measuring tools and i have verified and manually to design a mount that will allow the Ptfe Tube to enter or exit the Ams Buffer HUB in a nearly 100% straight degree preventing the tube bending near the entry exit point of the Ams buffer. This will help and allow the filament to go from the Ams to the Ams Buffer Hub to the Printer smoothly and retract back with the least amount of pressure and friction. This fix can also solve wear issue on the internal of the Ptfe tube as less friction means less wear.&nbsp;&nbsp;What do i need in additional to installing this printed fix part? The screw that you need for this fix should be currently already on your printer just unscrew then install fix and then reinstall. Or you can try the screws from your Filament Holder.&nbsp;<h2>Additional Notes</h2>The error itself is complicated and non definitive. Whatever cause the error today might not be the same area that cause the error again, same with person A and Person B setup, as the error itself is mainly due to tension with friction triggering the sensors in the machine.&nbsp;I would suggest you download and try and install all my fixes together for the proper effect as together they will ensure a smooth delivery of the filament with much lesser friction (read write ups) and hopefully that will help and reduce or resolve the error. If you use only one or 2 of the fixes the error could still happen as there are still other area might still be causing excessive friction.