miao_o

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.

Master Sword Pen

多色

Josh-3D

A headphone stand with industrial styling!&nbsp;I have my previously designed stand, but it's not always suited for larger headphones. I also wanted something a little more industrial styled, and thus managed to come up with this.&nbsp;Model is featured in Bambu PLA Matte Charcoal and Bambu Iridium Gold Metallic. A good alternative with similar look to Bambu's metallic is Hatchbox's Metallic line. There might be others, but that's the one I'm aware of.&nbsp;[Spotlight]Check out this <a target="_blank" href="https://makerworld.com/en/models/198355#profileId-218961" rel="nofollow noopener">PS5 Headset focused remix</a> by <a target="_blank" href="https://makerworld.com/en/@JJDeluxeDesigns" rel="nofollow noopener">Johan Jamaer - JJ Deluxe Designs</a>! &nbsp;[Tools & Assembly]&nbsp;Assembly is pretty easy. You'll need the following hardware and tools.M4x10 - 2M4x16 - 4 M4x20 - 4 M4x25 - 4 M4x40 - 4 M4 Nuts - 16Hex DriverDrill bit for clearing holes&nbsp;For the screws, I am using M4 Socket head cap screws. If you don't have M4 screws on hand, I would recommend purchasing an assortment kit, like <a target="_blank" href="https://www.amazon.com/gp/product/B09TYR314X" rel="nofollow noopener">this one from amazon</a>.&nbsp;Start by clearing out the holes as illustrated. A flat surface was left on these holes so additional support wouldn't be needed during printing. Only the leg and foot pads will need this.<figure class="image image_resized" style="width:51.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_cc69e7772ce41.png"></figure>For assembly, you'll be using the 3d printed spacers along with the M4 screws. The side with the nut is wedged slightly, so as you tighten it, it should grip onto the model instead of spinning.<figure class="image image_resized" style="width:50.28%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_e4a86bd163cf6.png"></figure>For the headphone rest, first screw the top to the bracket.<figure class="image image_resized" style="width:49.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_4922cbd159136.png"></figure>Then use the following image to help guide the rest of the build, and which screws go where. First assemble the main arm, and then work your way outwards, attaching the base, legs, feet, and headphone rest.<figure class="image image_resized" style="width:71.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_6c33876ddced.png"></figure>&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Headphone Stand - Industrial

摆件

Jacklove

Joining the MakerWorld family for the first time, I am very happy to share my first model with everyone. I hope you like it and can also provide your opinions or suggestions on this model for my future improvement.

Balloon dog

模型

thundercat

<figure class="media"><div data-oembed-url="https://youtu.be/L_TQo1GvfP4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/L_TQo1GvfP4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><a target="_blank" href="https://youtube.com/shorts/L_TQo1GvfP4" rel="nofollow noopener"> Click to see video </a>Note: This only works when using Bambu Studio on your computer.Feel free to use the Raw printer profiles for your corresponding printer or follow the steps described here on this <a target="_blank" href="https://wiki.bambulab.com/en/A1-mini/Midi" rel="nofollow noopener">Bambu wiki (click here)</a> to copy and paste into your A1 and A1 mini printer profile.&nbsp;Steps:Click on Raw Model Files ( green button)Download the Raw file for your corresponding printer.Accept the modified start G code prompt when opening with Bambu studioSave your new printer setup <a target="_blank" href="https://youtube.com/shorts/6nUjSRf8cvw" rel="nofollow noopener">Click to view Video: How to use makerworld pre-configure A1 printer sounds</a><figure class="media"><div data-oembed-url="https://youtu.be/6nUjSRf8cvw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/6nUjSRf8cvw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Feel free to request a tune you want to see next in the comments below.Check out my profile for other tunes!Cheers&nbsp;Please proceed at your own risk, I am not liable for any damage caused to your printer.

A1 Start Sound Star Wars - The Imperial March Sound A1 A1 mini printer sound noise

特殊

Jamboodle

<h2>Fancy decorative heart shaped boxes - Set of 7 styles including plain</h2>Multi color prints of the popular conversation hearts. Includes 7 different styles of lids with ornate styles. Prints pictured are about 100mm by 100mm by 16 mm deep.&nbsp;High poly models so they can be printed even larger and still come out smooth. I used 9 top shell layers for good depth to the colors.These will make great gift boxes or even candy boxes for the upcoming valentines day. If you find these useful please give them a like and check out my other work.&nbsp;Happy Printing!

Fancy Heart Boxes - Set of 7 styles

礼物

Iakko3DArt

Here is a model of a dragon, transformed into a flute with attached base for the Year of the Dragon Contest&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;My other Project:<figure class="image image_resized" style="width:23.91%;"><a href="https://makerworld.com/it/models/120530#profileId-129678" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/383419/2024-01-10_22f307743f789.jpg"></a><figcaption>Suzanne (Blender Monkey) string</figcaption></figure><figure class="image image_resized" style="width:24.06%;"><a href="https://makerworld.com/en/u/1671010450/collections/289998" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/383419/2024-01-07_6e877b6c8ab9.jpg"></a><figcaption>String alphabet project</figcaption></figure>&nbsp;

Flute of the Dragon

乐器

Classic 2.5

The Thinker at the Museum Rodinfrom Scan the Worldby <a target="_blank" href="https://www.myminifactory.com/de/users/Mus%C3%A9e%20Rodin" rel="nofollow noopener">Musée Rodin</a>13cm height, supported.BL PLA Matte White.Important: When removing support be extremely cautious, take your time, remove bit by bit.The Fingers, especially on lower Hand, can break easily.I used Matte PLA which I recommend since it removes slightly better than standard PLA.+++  Added 2nd Profile: A1 Mini, 0,2 Nozzle, 8cm height.+++  Added 3rd Profile: X1C, 0,4 Nozzle, 24,5cm height.&nbsp;&nbsp;&nbsp;

The Thinker at Museum Rodin from Scan the World

艺术

一个钥匙柄 如果你对钥匙柄坏了可以使用它

娃娃钥匙柄

工具

Amao Chan

<div><h1>Summary</h1><div>Pangolins now are facing critical crisis as they are closing to extinct. In fact, humans are the murderers of this disaster, superstition and greed are the main reason to cause this massacre. Pangolins, the mammals covered in tough and overlapping scales, are actually far from aggressive. Their scales provide good defense against predators in wild. However, they’re considered the world’s most hunted animal because people believe that the meat is prized for medicinal ingredient and the scales help curl impotence. Nowadays, the numbers of pangolins are less and less, some people eat them only for the reason of showing their ostentatious wealth, what they do to these helpless animals is to make them approach to endangered. Although International trade in pangolins has been banned by CITES since 2000; and are listed them as 'protected species' in most Asian home states, scaly anteaters are still threaten with smuggling and poaching. Pangolins’ disappear would not be the result we expect to see, only when strictly implement of law enforcement on punishing these poachers and pangolin-eaters would effectively bring down the crisis of extinction. This is our latest chance to save pangolins, and please never make science predictions come true. Pangolin is a really skillful and difficult work that I have spent a lot of time on it. It has been passed at least six editions before presenting to all of you. What I was trying to challenge is an artwork with both perfect appearance and function. It was a little struggle for me to share this work at the beginning since I’ve fallen in love with it when it’s first done and stood in front of me. At this moment, what I am wondering more is to let you firsthand it, holding and feeling the variation with actions. Enjoy and I believe you’ll like it. Same file will be uploaded to <a href="http://fastlab.tw/" rel="nofollow">http://fastlab.tw/</a>, (Institute for Information Industry, III), which is a 3D works sharing website, welcome all 3D players upload your works and have fun here! Special thanks to Shinkong Synthetic Fibers Corp. for providing dedicated color materials (ABS) and supporting on this creation.Design Software - SketchUp my settings ABS z resolution 0.2mm scale 100% Don't printing all models are small then 75% of original model size, and set up 0.15mm layer resolution.<a href="https://amaochan.work/" rel="nofollow">https://amaochan.work/</a> <a href="https://www.facebook.com/paperworkers" rel="nofollow">https://www.facebook.com/paperworkers</a> <a href="https://www.youtube.com/watch?v=fkWxOLbFxPI" rel="nofollow">https://www.youtube.com/watch?v=fkWxOLbFxPI</a><hr>穿山甲正面臨迫切的危機，牠們走在快速滅絕道路上，人類是這場災難的兇手，迷信與貪婪是屠殺的原因。穿山甲這個性情溫和的動物，全身佈滿鱗片，這些鱗片在野外對於保護自己有些幫助，但是身上的鱗片也是牠們被獵殺的因素。因迷信穿山甲的鱗片有醫療與壯陽的效用，導致穿山甲這無辜的動物被瘋狂獵殺。也因為野外的穿山甲越來越少，所以穿山甲成了昂貴的食物，有些人僅僅是為了炫富而食用穿山甲，這樣的行為也把穿山甲推上最後的滅絕之路。雖然現在穿山甲在多個國家及地區均禁止出口及貿易，但是走私與盜獵依然存在！落實執法，逮捕並懲處這些盜獵者及食用者才能真正解決穿山甲的危機。科學家認為亞洲的穿山甲可能將於20年內滅絕！這不是我們想要的結果，現在就是解救穿山甲的最後機會。請別讓科學家的預言成真。這個作品我花了很多的時間，是一個難度很高的作品，自開始到完成創作至少修改了6個版本，不停地推翻與重建，因為我在挑戰一個美與機能都要兼具的作品。所以當我完成這個作品時，也同時愛上這個作品，因此有些捨不得分享出來。但我更期望朋友們也能夠親自體驗我的感受，能將牠握在手中，感覺牠的觸感、聲音與各種動態的變化。當你下載了並列印這作品時，願你也能像我一樣愛上這個作品。同樣的檔案我也分享於 <a href="http://fastlab.tw/" rel="nofollow">http://fastlab.tw/</a> 這是台灣資訊策進會的3D分享網頁，希望各位3D玩家也能慢慢豐富這個地方。感謝 新光合成纖維股份公司 訂製專用顏色之3D列印材料贊助本作品創作。列印建議 層高0.2mm 免支撐 縮小列印時請別小於0.75並提提高解析度到0.15mm</div><h1>Custom Section</h1><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=fkWxOLbFxPI"><iframe src="//www.youtube.com/embed/fkWxOLbFxPI" frameborder="0" allowfullscreen="allowfullscreen"></iframe></div></div>

Save pangolins

可动模型

Williams Industries

Layered/textured bat &nbsp;Check out all of our great fun stuff over on our Patreon: https://www.patreon.com/WilliamsIndustries

Halloween Bat

分层模型

SmileyPrinter

Magnetic fidget sword as seen on TikTok! One side of the sword attracts while one side repels its scabbard. While the magnets are repelling it creates a springy sensation that is great for fidgeting. If you push the sword down and quickly release you can make the sword go flying!While the magnets are attracting it creates a satisfying click noise as it fully closes.Let me know what sizes you would like!Uses 12 magnets, 3 for each half of the sheath and 3 for each side of the sword blade.Print 2x of the blade hilt and 2x of the sheath. More magnet sizes to come! Design files are included so you can decorate the parts as you wish to fit your personality and magnet size.Print on the flat side, no supports required. Use super glue to glue the hilts to the sword blade and the two halves of the sheath together AFTER GLUING THE MAGNETS IN. (Once the two halves of the sheath have been glued it will be basically impossible to get the magnets in). Rock model from: https://www.myminifactory.com/object/3d-print-stone-218700#google_vignette<h4>MAGNET ORIENTATION </h4>Orientation is crucial to get the right effect!Glue the magnets with north facing outwards on one of the sheaths and on the other glue the magnets with south facing out. For the sword repeat the process so one side of the sword has magnets with north facing outwards and the other side has south facing outside.

Magnetic Fidget Sword

活动工具

Ken Mills

Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well).&nbsp;The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in.&nbsp;Important: Be sure to allow the print to fully cool before removing from the build plate to avoid warping it while still warm.&nbsp;If you are having trouble printing thin lines or the slicer preview is missing lines, try the Arachne wall generator. The included profile has this set already.&nbsp;Check out my other patent art here: <a target="_blank" href="https://makerworld.com/en/u/3703368285/collections/18978" rel="nofollow noopener">https://makerworld.com/en/u/3703368285/collections/18978</a>

Space Shuttle Patent Art - Top

装饰

nicodeimos

Ring hole: 4.8mm.Model size: 23mm x 47mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a><a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">Want to sell my models? More info on my profile!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Nintendo and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

多色

摆件

模型

特殊

礼物

乐器

艺术

工具

可动模型

分层模型

活动工具

装饰

玩具