mg-dienstleistungen

Wimpfi

Korb mit 3 großen, 6 kleinen (3 tief, 3 flach) Fächern

Toothbrush Organizer

Basteln

eds_3d_shop

Working on such designs takes a lot of time and if you like my work and want to support me - please print my “Designer” printprofiles! It will help me to design more! Thank you in advance!🙏  Powerfull magnetic Bambu Lab X1 / P1S (full AMS Hub compatible!) Exhaust Fan Muffler / Fan Silencer without Supports/Bridges! (Eds Version)<h2>Looks really nice and if you don't use/need screw possibility - this is your version :-) The silencer holds securely with magnets only! (8x3mm)</h2><blockquote>⚠️ If you have other magnet sizes: <ul><li><a target="_blank" href="https://makerworld.com/en/models/108894#profileId-116313" rel="nofollow noopener">Exhaust Fan Muffler/Silencer for 10x3mm Neodim magnets</a>. </li><li><a target="_blank" href="https://makerworld.com/en/models/47426#profileId-49119" rel="nofollow noopener">Exhaust Fan Muffler/Silencer for 6x3mm Neodim magnets</a>. </li><li><a target="_blank" href="https://makerworld.com/en/models/47289#profileId-48982" rel="nofollow noopener">Exhaust Fan Muffler/Silencer with Screw Option for 8x3mm Neodim magnets</a>.</li><li><a target="_blank" href="https://makerworld.com/en/models/46749#profileId-48579" rel="nofollow noopener">Exhaust Fan Muffler/Silencer with Screw Option for 6x3mm Neodim magnets</a>.</li></ul></blockquote>My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-)Main changes - really nice (with big bambu lab logo) and easy print version without supports / bridges! You can't screw it on, but it will hold only with magnets wonderfully! This version is suitable for everyone with and without AMS HUB! :-)I changed the acoustic properties, rounded off the ventilation curve and I tested about ~5-6db average reduction of noise! Insulated with the carpet fleece ~6-7db! <a target="_blank" href="https://makerworld.com/de/models/46740#profileId-48575" rel="nofollow noopener">Cutting Templates for self-adhesive carpet fleece you can get HERE</a>!&nbsp;For magnets mounting, you will need up to 16x of 8x3mm magnets (two stacked magnets for each hole). Just glue them in the holes! (The holes are a little bit bigger - as clerance for most of magnets ;-))&nbsp;If you wont to use additionally the screw option (with one SHCS m3x10mm screw), take a look on these designs <a target="_blank" href="https://makerworld.com/de/models/46749#profileId-48579" rel="nofollow noopener">Eds Exhaust Muffler with screw option and 6x3mm magnets</a>, or <a target="_blank" href="https://makerworld.com/de/models/47289#profileId-48982" rel="nofollow noopener">Eds Exhaust Muffler with screw option and 8x3mm magnets</a><h4>Print / Install Instructions:</h4><ul><li>I recommend printing with 4 walls, 6 top and bottom layers, and 0.16mm layer height on Bambu X1. You want a very solid shell so that air/noise doesn't escape as easily. PLA material is fine.</li><li>After printing, you can glue in magnets into the holes (you can use up to 16x magnets, but you don't need to fill all holes with magnets, 10 will be enough ;-)</li></ul>I've been using this setup for several months and this simple mod definitely makes my X1 quieter!I don't have any precise measuring equipment for this, but the fan noise has definitely become even more muffled for my ears - see video about on my Instagram Channel: <a target="_blank" href="https://www.instagram.com/reel/CmlUerEMyGf/?igshid=YmMyMTA2M2Y=" rel="nofollow noopener">https://www.instagram.com/reel/CmlUerEMyGf/?igshid=YmMyMTA2M2Y=</a>&nbsp;INFO from <a target="_blank" href="https://de.wikipedia.org/wiki/Lautst%C3%A4rke" rel="nofollow noopener">Wikipedia</a>: “Increasing the sound pressure level by +6 dB corresponds to a doubling of the sound pressure”<figure class="table"><table><tbody><tr><td>BambuLab X1 Carbon with AMSNoise level without muffler<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/714585/2023-10-22_269c47eca2591.jpeg"></figure></td><td>BambuLab X1 Carbon with AMSNoise level with muffler<figure class="image image_resized" style="width:93.43%;"><img src="https://makerworld.bblmw.com/makerworld/draft/714585/2023-10-22_d9d18f7b62626.jpeg"></figure></td></tr></tbody></table></figure>Testet with “Dezibel X App” (iOS) on old iPhone&nbsp;— ! —&nbsp;Thanks for downloading, rating in advance and please don't forget to like this model! ;-)<h3>Take a look at my another very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/714585/2024-01-12_00009ce9c82bf.png"></a><figcaption>🔗<a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">Eds_3D_Shop designs on MakerWorld</a> 🔗</figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;

8x3 magnets - Exhaust Fan Muffler/Silencer X1/P1

Drucker

PAPA Emeritus IV

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Gray Transmission Distance: 3.1 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Gray Transmission Distance: 3.1 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #13 (1.2mm) swap to Blue At layer #14 (1.28mm) swap to Gray At layer #17 (1.52mm) swap to Jade White At layer #21 (1.84mm) swap to Gray At layer #25 (2.16mm) swap to Jade White for the rest.

Basteln

Drucker

Picture