Merenhir

TheIceBurge

I AM NOT RESPONSIBLE FOR CLOGS OR DAMAGE TO YOUR TOOLHEAD, USE AT YOUR OWN RISK!&nbsp;If you give a low rating, please explain why, what you changed (if anything), list the filament youre using, if you dried it, and how you started the print (Bambu Studio ONLY), and post pictures so I can help you.&nbsp;Dont leave a 1 star review with no explanation, thats toxic and looks bad on the profile. I do respond to everyone. If you do leave a 1 star review without listing the info in the above bold outline, I WILL report your review for removal. I dont play ignorant games.&nbsp;The other models in the pictures are not my models, I used them to test out transparency!&nbsp;This was tested on an X1C.&nbsp;Good for stained glass prints!&nbsp;You ever wanted to print glass? Well its not glass but its close enough.With this profile, you can print ICE cubes, you can also use this profile to print very transparent 3D models, but theres some rules you HAVE to follow:&nbsp;P.S. You can try using transparent colored filament as well. It wont look as transparent as clear but you can do some stuff with it. IC3D is what I use for filament, links are in the rules below. Also for A1 Series and non Bambu printers, copy the values from Bambu Studio on this profile to your slicer, or if your using Bambu Studio with A1 Series or your non Bambu printer, just copy all settings over using 2 windows.&nbsp;FOR THE NO FAN PROFILE, MAKE SURE YOUR PATTERNS ARE ALL SET TO ALIGNED RECTILINEAR! A commenter noted theirs wasnt set to aligned rectilinear when they ran the profile, which may be a Bambu issue since all my prints were done with that same profile and it was set to aligned rectilinear before I even uploaded these profiles.&nbsp;<ol><li>DO NOT RUN THIS PROFILE OFF THE BAMBU HANDY APP ON YOUR PHONE. ONLY USE BAMBU STUDIO. The Bambu Handy app cannot read custom profiles.</li><li>Restart your printer (power off for 5-10 seconds and power back on) before using this profile, ive had weird issues with the X1C deciding to put lines through the x and y axis on each layer as if the extrusion multiplier kept dropping as I continued to reprint for testing purposes even though it was set properly.</li><li>Leave ALL settings alone unless you know what youre doing. I mean this in the most literal way. I dont want you changing settings then complaining that it didnt work or it clogged on you, because the problem is on you at that point.</li><li>DO NOT SWITCH THE PRINTER PROFILE, print it as it sits on the printer its configured for, this profile will warn you that its not the right printer if youre using an X1C. Ignore the warning and print it anyway. Switching the printer profile will cause you to lose everything this profile is.</li><li>DO NOT SWITCH THE FILAMENT PROFILES, print it as it sits but select the filament you want to use to print with whether its in the AMS or stand alone.</li><li>SAVE THE PRINTER PROFILE, PRINT PROFILE, AND THE FILAMENT PROFILE as soon as you open it so you have them for later. You can name them all “ICE Profile” or “Glass Profile” or whatever you feel.</li><li>THIS IS TUNED FOR A HARDENED STEEL .4 MM NOZZLE. If youre using stainless or brass, dont complain to me if its over extruding or under extruding. Youll have to tune your extrusion multiplier yourself to get the results you want. You may also have to tune your hot end temp as well if youre not using hardened steel.</li><li>Super tiny prints like screws or bolts or very small printable areas just will not work with this profile. You have been warned. The updated profile should help with smaller models.</li><li>I used IC3D Clear Transparent filament (labelled as Natural), you can pick it up on <a target="_blank" href="https://www.ic3dprinters.com/shop/recycled-petg/" rel="nofollow noopener">IC3D&#39;s website</a> or at your local <a target="_blank" href="https://www.microcenter.com/product/644083/ic3d-175mm-natural-recycled-petg-3d-printer-filament-1kg-spool-(22-lbs)" rel="nofollow noopener">Micro Center</a> store. Other filament brands may not work with the exact extrusion multiplier that I have set. Again, no complaining if youre not using the same filament or hardware. Different filament brands and different nozzles require different settings.</li><li>Keep your chamber around 38C. Theres room for movement with this, but for the love of Bambu, DO NOT let your chamber get over 42C. The extruder motor gets insanely hot under normal conditions to the point it burns you if you touch it. 42C+ and hot extruder motor = melted filament inside the extruder body. Your extruder WILL CLOG if you dont follow this rule! Ask me how I know. Open your top glass or take it off, ams risers are great for this purpose. Leave the exhaust fan at 40% or turn it up, thats your choice. But leave it on 40% or up. And keep your front door closed to your printer. For other printers, a chamber may not be necessary, but there cant be a draft around your print.</li><li>260C on the hotend, anything above or below this temp have lower quality transparency. Ive been working on this profile for 2 months or so.</li><li>80C bed to ensure the layers melt together properly and to keep the print sealed to the bed during the whole printing process. This is necessary.</li><li>DRY YOUR FILAMENT IN A <a target="_blank" href="https://www.amazon.com/Upgraded-Filament-S2-Printer-Dehydrator/dp/B0BM97WX1D/ref=sr_1_2_sspa?crid=9Z5YDRGB1EGM&amp;dib=eyJ2IjoiMSJ9.qj8bDnbbYe3NVdvffaBD_Aq0DYAe9JR5UYMC8WvMBPiNiq2cny_X4bl0DwQ8HxX-YcwrUs8sGH8Tblougn4ZzVGaLxV3i_InuRq-UkgbgsJuSBgWix83x07PEHkyoSz3ZSMM5kShlIkMcdf3us5WZmA4jO7_oSfH8czL1kJwFF4lWHBjwJGPxzqWRnIW1O3aUD_yAurX1r56etMOeUyBDcCOn1aDgVnSsfmMvuBKBr0._173YSuRcBwkDgt4eoGM65CJkVzu3flKKTvbbd2141I&amp;dib_tag=se&amp;keywords=s1%2Bfilament%2Bdryer&amp;qid=1712304995&amp;sprefix=s1%2Bfilament%2Bdryer%2Caps%2C111&amp;sr=8-2-spons&amp;sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&amp;th=1" rel="nofollow noopener">FILAMENT DRYER</a> AND KEEP IT DRY! I cant stress this enough. If your filament is cloudy, its one of two things. Either your filament is wet (you didnt dry it for long enough or its not in a dryer while youre printing), or you turned on the toolhead fan too high.</li><li>DONT RUN THE TOOLHEAD FAN TOO HIGH. This will cause the filament to cool rapidly before the next layer goes on, making each layer cloudy. 0% for layer times passed 15 seconds, currently 20% for 5 second layer times.</li><li>0.1mm layer height, leave this alone for top to bottom transparency. If youre brave enough to drop it to .08mm layer height, experiment around with it. But just know that .08mm layer height clogged my extruder a couple times because the filament wasnt moving through the extruder fast enough which caused the heat from the extruder motor to melt the filament inside the extruder body. Im pretty sure I also had a nozzle clog at .08mm layer height as well. A butane torch and Allen head tool was able to get me out of that bind.</li><li>25-30mm/s. This speed is the optimal speed for perfect transparency.</li><li>PEI smooth beds, or pey or any other smooth pe style beds should work fine for glass like bottoms, dont use glue on these beds for this profile. If youre using a textured bed and complain that you cant see through it, thats your fault. Youll see through the model but not through the textured bottom. If youre using an engineering plate or a cool plate, just dont. If you do, use glue. Youll thank me later. Again if you cant see through it and you used glue, thats on you. If you for some reason are using a glass bed in these printers, which im sure is very possible, dont complain about trying to remove the print. Yea the glass bed would be perfect for a glass bottom finish, but probably a good idea to use glue for a glass bed for easy part removal.</li><li>100% infill for the best results.</li><li>NO BRIMS. these are hard enough to remove from the models as it is. With an 80C bed, brims arent necessary. Unless you have a model with the tiniest base ever, id leave brims off. Or you can use a raft which I have not set up for easy raft-to-object removal.</li><li>ALIGNED RECTILINEAR for all layer patterns is the best way for the layers to mend together properly and for the best transparency! Normal rectilinear gives you a crosshatched pattern through every single layer and you will see it. The extrusion multiplier will fill in the gaps automatically to where you wont see any pattern lines through the object youre printing.</li><li>DO NOT USE FILAMENT FLOW CALIBRATION WHEN STARTING THE PRINT! This overrides the extrusion value thats set.</li><li>Supports are off by default, but if your printing something with a large overhang or bridge, turn it on. Classic supports for small bridges and up are recommended. I havent tried tree supports on this profile so thats on you if you use it.</li><li>If you do see lines between each layer in the x and y axis, lightly step your extrusion multiplier up by .002 and do some test prints till you get it dialed in. Not every printer will work perfect because of how the extruder motors are wound up in the factory.</li></ol>This is the result of under extrusion:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000414482/design/2024-04-05_2c006beed0822.jpg">This is the result youre looking for:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000414482/design/2024-04-05_9301732ddd8f8.jpg">You might have boogers on the walls of square prints, this is normal for the extrusion multiplier thats set. Just use edge cutters and clean it up. You WILL have lines in the top surface, this is normal for the extrusion multiplier thats set. But if you have a plastic annealing oven or a butane torch, turn on ironing with the settings that are set for ironing already, and let it anneal, this should further improve your glass like finish! Ironing WILL cause boogers to form on the edges since its ironing out the extra filament thats lifted up. Using a torch is hard to do for annealing purposes, the part WILL warp as it cools and if you leave the torch on it for too long, it will start to bubble and ruin the part. For my safety and your safety on the torch method, I AM NOT RESPONSIBLE FOR DAMAGES OR YOU BURNING YOUR HOUSE DOWN. Use safety gear, go in a well ventilated area and keep a fire extinguisher next to you during the torching process just in case. Thank you love you &lt;3&nbsp;This is what torching your top layer would look like at 5mm thick:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000414482/design/2024-04-08_3561453eb1b9a.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000414482/design/2024-04-08_986a2dc030241.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000414482/design/2024-04-08_9070627af6b84.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000414482/design/2024-04-08_8cf02d09d4cd3.jpg">&nbsp;Fixed the issues that were underlined here, check out the new updated profile!&nbsp;IF THE UPDATED FAN PROFILE CAUSES PROBLEMS IN YOUR WALLS, USE THE PROFILE WITH NO FAN. THE NO FAN PROFILE FIXED A COMMENTERS ISSUE THEY WERE HAVING! BE SURE IF YOURE USING AN ENGINEERING PLATE OR COOL PLATE ON THE NO FAN PROFILE, CHANGE THE TEMPS ON THE BEDS TO 80C!

PETG Glass Profile: Print ICE Cubes X1C P1S

Modelli stampa

Marcam

<h3>Mini books for dioramas or miniatures</h3>A collection of mini books for a mini library. Each model consists of a stack of books as you would find in an old library.These models are though to be used in dioramas, booknooks or architectural miniatures; the dimensions are suitable for a 75 mm scale with minor adjustments. These minibooks are part of a personal project of a hogwarts-library-inspired booknook.&nbsp;<h4>Printing suggestion:</h4>Though I printed these models with my old 3Drag printer obtaining very decent results, for the best result I suggest using a resin printer.

Mini books

Miniature

Patrickart.hk

Eevee Pokemon

Pokémon

Powerpill.prints

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_482e88eb7e05f.png"></figure>This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 2 - 4 Colours! Just load your filament, slice and go!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed these keychains, please consider boosting to support the creator. Thank you!</boostcontent></boostme>Most keychains take between 30 minutes to an hour to print! This Eevee Evolutions pack includes the following Characters: Eevee, Flareon, Espeon, Vaporeon, Jolteon and Umbreon! <a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">The three evolutions: Glaceon, Leafeon and Sylveon are in Pack #8</a> <a target="_blank" href="https://makerworld.com/en/models/472759#profileId-382643" rel="nofollow noopener"><img class="image_resized" style="width: 30.97%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-14_3ab95d58e1041.gif"></a><figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-07_dc330ce646168.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-07_0a2962a7126e5.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-07_358b5b8be1e3a.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-26_3bc2fc5b971f6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/213311#profileId-232885" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-29_2d186746f8aae.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/213311#profileId-232885" rel="nofollow noopener">Pokemon Keychain Pack #5</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/234438#profileId-250977" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-03-04_2b0f305261921.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/234438#profileId-250977" rel="nofollow noopener">Pokemon Keychain Pack #6</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/253647#profileId-270086" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-18_c11965538aa41.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/253647#profileId-270086" rel="nofollow noopener">Pokemon Keychain Pack #7</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/472759#profileId-382643" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-18_7037cee7c2094.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/472759#profileId-382643" rel="nofollow noopener">Pokemon Keychain Pack #8</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/503298#profileId-418741" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-18_ee2dfb693b7bd.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/503298#profileId-418741" rel="nofollow noopener">Pokemon Keychain Pack #9</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_4b712df4c57ba.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_ed5d31eadc8b3.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_2f3f64f70a6df.gif"></figure>I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_c5fc221922c1c.webp"></figure>If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_366891a0ec5ab.png">Want to remove the keychain hole? No problem! Each keychain has a “Keychain hole” object on each plate. Just select it, delete it, and re-slice!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_d454162579477.gif"></figure>Want to scale these up really large to make some wall art? Just delete the “Keychain hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.08mm so you&#39;re not printing extra layers though!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_9db4c750c919b.gif"></figure>If you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print great! If there&#39;s any other packs or characters you want to see, leave a comment! Hope you Catch, er, Print them all!! Like this pack? Check out my other video game keychain packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_1b51dac6130d8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_3888685c1d948.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/197958#profileId-218564" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_231c0706c647e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/197958#profileId-218564" rel="nofollow noopener">Nintendo Classics Keychain Pack</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/442832#profileId-348820" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_6d105be145fb8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/442832#profileId-348820" rel="nofollow noopener">Pac-Man Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/399835#profileId-301320" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_8201d7f9605df.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/399835#profileId-301320" rel="nofollow noopener">Yoshi Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_7b7272f64e966.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>

Pokemon Keychain Pack #2 - Eevee, Glaceon, Espeon

Da stampare

Dragon Eye Set

Miniature tongue