Mephister

NUKDDD

Same great lid in the form of a ring lid similar to most glass mason jars. &nbsp;For those who would like to stick something in their jars but still want the aesthetic of it with the lid on.&nbsp;Fits both the short and regular version of mason jars by 3DPODesings. &nbsp;Print the ring lid only or with the cap. The cap can be used both ways, one is flush with the top of the cap when closed; flip the cap upside down and it'll look similar to how the cap looks on a glass mason jar.

Mason Jar Ring Lid with Cap for Both Regular or Short Versions

glass

ssweat

I designed these P2 Swimmer Hand Paddles for the beach contest using Tinkercad.&nbsp;These can improve your swim stroke and help you swim stronger and faster if used properly. They also float in case one comes off.&nbsp;Using the 3d printed tpu straps you can easily secure the paddles to your hands simply by sliding hands under the straps as shown (similar to how a flip flop fits).The straps have adjustable barbs to tighten or loosen in the slots. You can release by simply twisting the tpu strap 90 degrees and the barbs will align with larger portion of the slot and slip out pretty easily. Reuseable or can print a few extra(recommended) to have on hand in case of loss or breakage.&nbsp;I printed mine in PETG and at only 3mm thick they have a little flexibility, not too rigid. I did print one in PLA but Petg or better is recommended to deal with warm weather and salt water or pool chemicals.&nbsp;My Settings:For paddles: .24 layers, arachne walls, 2 wall, 15% adaptive cubic, infill combination(checked), top/bottom surface pattern = Monotonic Line, Top shells = 4, bottom shells = 3For TPU Strips: .12 layers (to help print the tiny barbs), Arachne walls, 999 walls (to make them solid)&nbsp;I hope you like them and I always welcome feedback :)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

P2 Hand Paddles Swim Faster and Stronger Swimming

sport and camp

DatumCAD

<figure class="image image_resized image-style-side" style="width:38.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-20_394e64d5f2285.gif"><figcaption>GIF - Exploded View Animation</figcaption></figure>An adjustable handle that can be attached to any existing standard full-size hacksaw blade. This compact tool allows you use the blade in tight / hard to reach areas, and where a full-frame would foul with the material.&nbsp;I also have various other models for various blade types &amp; are yet more compact in size. Feel free to check those out too:<ul><li><a target="_blank" href="https://makerworld.com/en/models/386059#profileId-286421" rel="nofollow noopener">Junior hacksaw handle</a></li><li><a target="_blank" href="https://makerworld.com/en/models/400706#profileId-302219" rel="nofollow noopener">Jigsaw blade handle</a></li><li><a target="_blank" href="https://makerworld.com/en/models/410315#profileId-312254" rel="nofollow noopener">Reciprocating saw blade handle</a></li></ul>All designs incorporate opposing dual thumb CAM levers with positive snap shut to ensure the blade does not slip once held &amp; it is as safe as possible to use. This took a lot of prototyping &amp; testing but works great. It is quick &amp; toolless to adjust….and satisfying to use as a result.&nbsp;Most standard ‘full size’ hacksaw blades are 0.5&#34; (12.7mm) wide by approximately 0.6 - 0.7mm thick, if you want to double check yours for compatibility as anything this wide (or smaller) should fit fine.&nbsp;Note: The CAM levers have been deliberately designed to be tight fitting to avoid the blade slipping in the tool. That said, if after the first few engagements &amp; releases of the thumb lock it has not eased to a point you are comfortable using it, then you could try printing the smaller CAM levers from the Print profile provided. Additionally, if you have a thinner than standard blade or a loose fit, then you may want to print the Larger CAM Levers profile.&nbsp;If you like this model then you may also like my sliding <a target="_blank" href="https://makerworld.com/en/models/213504#profileId-233069" rel="nofollow noopener">steel ruler limit block</a> which also incorporates a CAM locking mechanism. Or any of my other <a target="_blank" href="https://makerworld.com/en/@DatumCAD" rel="nofollow noopener">DatumCAD</a> designs :)&nbsp;Fasteners: For this model you will need 2x M3 x 30mm fixings which act purely as strong pivot axles to the cam lever.&nbsp;Assembly:<ul><li>Insert the CAM lever into the Housing. Tip: Insert with the level in the closed / horizontal position as the holes will then line up easier.</li><li>Insert M3 Fixings. Tip: The fixings should pass though the handle housing counterbore hole &amp; the CAM lever relatively unhindered, but then will need lightly screwing into far handle hole which has been deliberately sized so as to require some tightening without to much force. (Remember these are just acting as pivot points, no need to tighten down hard, but equally the fixing should not want to fall back out either.)</li><li>Insert Blade. Top Tip: Open both of the CAM levers up around 180degrees from the closed position, so the CAMs don&#39;t grab the blade upon insertion. Once you have in the desired location, simply lock both CAMs fully down.</li><li>Enjoy - your adjustable hacksaw handle is now ready to use.</li></ul>I love designing for 3D printing, please take a look at all my other models which are all free (and will always continue to be)… if you value any of the downloads enough &amp; are able to support me, then please consider buying me a coffee to keep me going! <a target="_blank" href="https://www.buymeacoffee.com/DatumCAD" rel="nofollow noopener">www.buymeacoffee.com/DatumCAD</a><figure class="image image_resized" style="width:55.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-21_6e3d9fd6f9586.jpg"><figcaption><a target="_blank" href="https://makerworld.com/en/models/386059#profileId-286421" rel="nofollow noopener">Link to Junior version</a></figcaption></figure><figure class="image image_resized" style="width:55.01%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-20_278390d1fc3bb.png"></figure>

Ultimate Hacksaw Handle

szerszam

Stebe

This is a very simple wall mount for the BoboVR magnetic battery. There are 2 spots where you can optionally superglue (2) 8x3mm magnets so that the battery sits perfectly in place. The PLA will flex a little bit with the battery inside but it should be just fine.To mount I just used some double sided 3M tape. Just give it time to bond before putting the battery in. You could also very easily add a hole if you want to screw it into the wall or something.

BoboVR Battery Wall Mount (3M Tape)

quest

Darren

VERSA MOUNT &nbsp;The modular car Headrest hook and hanger system&nbsp;<figure class="table" style="width: 93.67%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-04-22_92053bb13ceea.png"></figure></td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-04-22_15e1d40b4a559.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-04-22_e8559c148d2bc.jpg"></figure></td></tr></tbody></table></figure><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model and want to encourage me to come up with more original and innovative designs please consider boosting this model.  I mainly design more unique and complex models that take longer to print.  Due to print time they get downoloaded less frequently than quick to print models.  Boost are a way to compensatie for this and are always greatly appreciated.   Thank you</boostcontent></boostme>&nbsp;Design&nbsp;I often need to hang my suit jacket, shirt or my dry cleaned clothes in my car to avoid them becoming wrinkled.  My hyper shedding German shepherd/Malinois often rides in the back seat so setting these down on the back seat is really not an option.  I noticed a number of head rest hook systems that are featured in the contest.  The designs are very well made and quite innovative.  Unfortunately I could not find one that feature a coat hanger.  I simply wish to have a place to hang a coat hanger as I already have plenty of those and don’t really see the need to 3d print another.&nbsp;So I decided to design a head rest with a coat hanger.  I also thought it interesting to make it modular to add extra features and options.&nbsp;My design features the following:<ul><li>Slide on head rest hook system with “Print in place rotating bushing” </li></ul>My car requires me to remove the emergency key from the FOB to remove the headrest.  I wanted a quicker and simpler mounting method. A slide on hook with a locking mechanism was the better option.<ul><li>Adjustable for different post distances. </li></ul>My design uses a pivot mechanism and can be used with a wide range of post distances.<ul><li>A slide-on modular mounts and holders</li></ul>It can accommodate different holder options including:<ul><li>Coat hanger ( I opted for 3 standard hangers);</li><li>Phone holder;</li><li>Nintento Switch</li></ul>I have also included blank slide-on holders (short and long) that can be used to quickly make your own custom holders. If you do let me know and I can post a link to your model so all can benefit;<ul><li>Two heavy duty hooks</li></ul>They can be used for grocery bags and other items.  My wife uses it to hang her purse.<ul><li>Cup holder </li></ul>Securely attaches to the hooks. If there is an interest (please let me know in the comments) I could model and upload a can and red bull holder. &nbsp;<figure class="table" style="width: 97.14%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 86.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-04-22_f94265a7ae61e.png"></figure></td><td><figure class="image image_resized" style="width: 91.57%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-04-22_b9c96a776d67e.jpg"></figure></td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-04-22_f2a0249a995a9.png"></figure></td></tr></tbody></table></figure>&nbsp;3D PRINTING&nbsp;For convenience I have provided printing profiles for the A1, X1 and P1. &nbsp;You can print the vertical bracket upright or laying down on the X1 and P1.  Laying down saves half the time.  I printed mine without any support so you can disregard warnings for support. &nbsp;IMPORTANT: &nbsp;Print the nuts and bolts with 0.20 mm strength and 50% infill.  Printing profile is provided.&nbsp;The bolt screws from the top and the nut has a bushing that allows them to pivot easily.&nbsp;My designs &nbsp;I enjoy creating 3d models that others can use and appreciate.  It is a very fun pastime.   I find it very rewarding to see my models downloaded and printed.  I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. &nbsp;If you liked my model and wish to encourage me please give it a like or a boost. If you wish you can also help me with my <a target="_blank" href="https://ko-fi.com/darren3dmodels" rel="nofollow noopener">filament costs</a>.  Thank you.&nbsp;My Models&nbsp;If you are interested, here are some of my creations. You can also see all my models on my <a target="_blank" href="https://makerworld.com/en/@user_1543154938" rel="nofollow noopener">profile</a>.&nbsp;<figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/425827?from=search#profileId-337902" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-05-05_8cb4bfc480828.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/425827#profileId-337902" rel="nofollow noopener">Autotray</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/439932#profileId-345597" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-05-05_80f1fc53f1258.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/439932#profileId-345597" rel="nofollow noopener">Versa Mount</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/447157#profileId-353793" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-05-05_252dfd34be1da.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Table saw</a><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Outfeed </a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/440873#profileId-346595" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-05-05_c0c403ecc4bc.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/440873#profileId-346595" rel="nofollow noopener">Treat helper</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/457210#profileId-365192" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-05-05_7677874c7a172.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/457210#profileId-365192" rel="nofollow noopener">Ipad tablet stand</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/432891#profileId-337490" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439932/design/2024-05-05_f02e210418cb4.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/432891#profileId-337490" rel="nofollow noopener">Autotray Lite</a></td></tr></tbody></table></figure>&nbsp;

VERSA-MOUNT - The Modular head rest mount

household

SNASA

This is a small and stealthy minimalist heat insert press designed for CNC Kitchen TS100 heat insert set. I didn&#39;t want to use a counterweight so I made an invisible spring and belt system hidden in the vertical part. Its size makes it perfect for small job on the workbench :<figure class="image image_resized" style="width: 42.73%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_a86cd65962c1d.jpg"></figure><figure class="image image_resized" style="width: 42.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_4f0eadde94f.gif"></figure>&nbsp;The sides are super convinient to store everything you need (there is also a spot for a small alen key).&nbsp;I have added the step files if you want to design your own soldering iron mount or use a different base.&nbsp;Miscellaneous:<ul><li>20 * M3 brass insert</li><li>22* M3x8</li><li>1 * M3x6 screw</li><li>2 * M3 Nut</li><li>3 * M3x25 screw</li><li>7 * M5 nut</li><li>6 * M5x10 or M5x12 screw</li><li>1 * M5x16 thumb screw</li><li>2 * GT2 idle pulley ID Ø3mm</li><li>1 * GT2 belt (200mm should be enough)</li><li>1 * Spring or elastic band</li><li>1 * LML12B 200mm linear rail</li><li>1 * <a target="_blank" href="https://cnckitchen.store/products/ts100-101-adapter-tips-set-m2-x-m3-m4-m5-m6-1-4-m8-100-lead-and-cadmium-free" rel="nofollow noopener">CNC kitchen Heat Insert Set</a></li><li>Optional :<ul><li>1 * M4x8 Screw</li><li>1 * M4 nut</li></ul></li></ul>Assembling:<ul><li>Insert M3 brass insert (see red arrow below)</li><li>Use M3x8 screw everywhere except 1 * M3x25 (see orange arrow below)</li><li>Use 1 * M3x6 screw to lock the spring or elastic band</li><li>Use 2 M3x25 to mount the GT2 idle pulley</li><li>Insert M5 Nut (see yellow arrow below)</li><li>Make sure to run the belt before assembling the GT2 idle pulley</li><li>Use a small piece of adhesive tape to secure the belt on the arm mount (makes it so much easier to mount the belt on the sliding carriage)</li></ul><figure class="image image_resized" style="width: 79.45%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_86b4fd1a3ef78.png"></figure><figure class="image image_resized" style="width: 35.29%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_75b2c88e1b92e.png"></figure>&nbsp;Print settings:<ul><li>PETG for the soldering iron holder, other part can be printed in PLA</li><li>Layer height : 0.2 mm</li><li>No support</li><li>Print orientation as shown below :</li></ul><figure class="image image_resized" style="width: 54.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_75456e3a941b9.jpg"></figure>

Minimalist Heat Insert Press

tool

Meister Edel

Cable Ties to be printed with flexible materials like TPU.The sizes are:<ul><li>90 mm</li><li>110 mm</li><li>130 mm</li><li>150 mm</li><li>170 mm</li></ul>I printed the mounts in PLA - 3 Perimeter 20% Infill 0,2 mm layer height. But ASA or PETG will be a better solution for the long run if you place heavy things on the holder.&nbsp;Have fun and keep printin!&nbsp;

Cable Tie TPU

Surin Ondro

Quad Cable organizer for FTP Ethernet 5mm thick&nbsp;No supports neededuse double sided tape or screw for stronger joint.&nbsp;Let me know if you need differen version (Single/double cable) enjoy :-)

Quad cable clip FTP

cabel

DCprint

I present you The Can Carrier&nbsp;A must have during the summer, around the pool / deck, or at any Party!&nbsp;Let you carry 4 cans of almost any size of your favorite drinks!&nbsp;Light weight and easy to print. Can be printed with or without supports, prints well either ways.I have created print profile with reinforced parts so that it&#39;s even more sturdy.

The Can Carrier

lukasglowinski

Container set for Ikea Skadis. Many different configurations possible.6 sizes containers, 3 heights to choose from.No support needed.One holder can hold up to 6 trays/containers depending on their size.Storing and rearranging as you like it.Happy printing.

Container/tray for Ikea Skadis

skadis

MakerofWorlds

This is a Gridfinity compatible cloth tape measure holder.&nbsp;It measures 1x1and is stackable.

Gridfinity Cloth Tape Measure Holder 1x1

Gridfinity

planpa3d

I was hoping to find a tough box to store some parts and tools for my Bambu printers, and I couldn’t quite find anything that I liked. So I decided to design my own.I wanted the box to be strong, snap shut, able to print in one piece, not require additional hardware, and not be over complicated. I didn’t want to be limited as to how many extruders, nozzles, or whatever part I wanted to put in the box. So, I left the inside open.I created two hinges that print in place, one for the main box, and one for the snapping mechanism to lock the box shut. Through the help of some supporters, a lot of test prints with different tolerances in the hinges and snapping mechanism where ran. Here is the best combination we found. A Big thanks to you all who helped!I printed this several times personally and created different logos to put on the lid of the box. I am also including a blank version of the box if you wanted to add your own text, or logo to it. I printed the box without support plenty of times without issue, but if your printer doesn’t bridge well you will want to add a small amount of support under the locking pin only.I also am adding a blank version of the box where the locking mechanism can be printed out separately, just in case you find its too tight and breaks accidentally.If printing the locking mechanism in place I recommend working the hinges in, moving them back and forth several times this will open up some of the clearances needed to allow the snap to lock in place without breaking. The lock can be rather tight in the beginning, but after a few uses should wear in just fine. If you find it too tight for your liking, you can always take a small file to the locking pin, and remove the bottom layer of filament that tends to be loose anyway.Enjoy!!

Tough boxes Print in place

adh2013

Just a quick file I made in OpenSCAD for a Honeycomb Storage Wall panel sized for the A1 Minis plate.

Honeycomb Storage Wall 180x180 A1 Mini 

honeycomb

ME3DPrint

A simple holder for light objects on the Multiboard system. It can hold 8 objects.Prints very quick and is friction fit.If for some reason yours doesn&#39;t fit properly, I could suggest you snip some of the inner pegs and just the two outer pegs to fit.Hope you like it…

Multiboard nUTray ThinLight Keys & USB Holders

multiboard

Michaela-SA

Use your PET bottle to blow bubbles with a Bubble Wand cap.

Bubble wand

Ancsa

mlodybuk

🌸 Celebrate Mom with Special Mother&#39;s Day Keytag! 🌸Looking for the perfect way to show Mom how much she means to you this Mother&#39;s Day? &nbsp;&nbsp;

Keytag for Mother's Day

Anyaknapja

FilliFuu

Cute baby dragon bracelet, multiple profiles including A1 mini with various sizes for adults or children.All print in place without supports and that's it. Carefully open the mouth to use the link.Avoid using silk for the mouth as silk is rather weak.&nbsp;Enjoy.

Lucky Charm Baby Flexi Dragon Bracelet

Game

Jorge dP.O.

A simple keychain to fidget and play with the keys, it uses a 6704RS bearing (20x27x4mm)I used ABS.

Karambit Keychain

Gadget

Spar-Fuchs24.de

Deutsch:&nbsp;Das ist ein Remix des A1 Mini AMS Risers.Da ich das ganze etwas stabiler wollte (es wackelt doch sehr arg) habe ich mich ans CAD gesetzt und das Verbindungsloch entfernt und die zwei Teile zusammengefügt, somit hat man mehr Stabilität und es wackelt auch nichts mehr!&nbsp;Edit 27.12.2023: <a target="_blank" href="https://makerworld.com/en/models/110341" rel="nofollow noopener">HIER</a> findest du die 10mm kürzere Variante (an einem Stück) die du auf dem A1 Mini drucken kannst.Check das Video dazu: <a target="_blank" href="https://www.tiktok.com/@sparfuchs24.de/video/7315808799367990560" rel="nofollow noopener">HIER</a>&nbsp;English:&nbsp;This is a remix of the A1 Mini AMS Riser.Since I wanted the whole thing to be a bit more stable (it wobbles a lot), I sat down at the CAD and removed the connecting hole and joined the two parts together, so you have more stability and nothing wobbles anymore!&nbsp;Edit 27.12.2023: <a target="_blank" href="https://makerworld.com/en/models/110341" rel="nofollow noopener">HERE</a> you can find the 10mm shorter version (in one piece) that you can print on the A1 Mini.Check the Video: <a target="_blank" href="https://www.tiktok.com/@sparfuchs24.de/video/7315808799367990560" rel="nofollow noopener">HERE</a>