mecfiremike

LittleProgrammer

Hi,I made this rack mount for the Raspi 5 because I had one for my Raspi4 and couldn't find one for the 5, so I made one.I printed it with black PolyTerra filament on a Bambulab P1PI used pretty standard 0.2mm layer height with 5 wall loopsGridinfill at 15% Printed flat on the bad, no wired standing positions.&nbsp;Thats all, I hope you like it.

Raspberry Pi 5 Rack mount

Raspberry Pi

porlock

The compact size of this tool renders it exceptionally convenient, enabling you to produce numerous copies swiftly and store them within your glue arsenal with ease. The addition of the spatula serves a dual purpose, facilitating the rapid blending of two-component epoxy glues while also enhancing efficiency. Such a practical accessory is poised to become an indispensable asset for creators, promising to streamline and expedite their crafting endeavors with its intuitive design and functionality. Instruction of usage: 1) Break the spatula from tray2) Put same amount of glue compound from both tubes 3) Mix them with the spatula

Small epoxy resin glue tray with spatula

Shop Items

Akio-42

<h3>Update Dezember 2023:</h3>I got a lot of requests of people who don't like to use Fusion360 so I added .stl files for bins from 1x1 to 7x7. Each size is available in 3U, 4U, 5U and 6U heights. And all files are available for 6x2mm and 6x3mm magnets.&nbsp;If you still want to have a different size bin there are instructions how to use the parametric Fusion360 file below. You just need to scroll down ;)To find the right size the files are named as follows: depth x width x height<figure class="image image_resized" style="width:57.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-12-29_f5e918155ca97.png"></figure>&nbsp;----------------------------------------------------------------------------------------------------------------&nbsp;This is a remix of the original bins by Zack Freedman that you can find here: <a target="_blank" href="https://bit.ly/ZFGridfinityDividerBins" rel="nofollow noopener">https://bit.ly/ZFGridfinityDividerBins</a>Outer dimensions of the bins are exactly the same as the original bins, so you have full compatibility to the gridfinity system.<h4>Improvements of this remix over the original model</h4><ul><li>The label tab is always as wide as the bin. This helps with lifting the bin easily and allows for more text on the label for wider bins.</li><li>The magnet holes have an improved design. They now print clean without support. I found that the magnet holes of the original bins did not print great and I had to clean a lot of them manually before being able to put in the magnets.</li><li>A completely redone parametric Fusion 360 file is included, that enables you to easily create the basis for your own bin design.</li><li>For ease of use of the Fusion 360 files dividers are not supported.</li><li>Guide to use the parametric Fusion 360 file - see the description below.</li></ul><h4>Magnets</h4><ul><li>The provided stl files come either with holes for 6x2mm magnets or 6x3mm magnets. Both versions have advantages and disadvantages.<ul><li>The 6x2mm magnets are usually a bit more expensive and hold less strong to the baseplates, however they don't interact that easily with the contents of your bins, when stacked on top of each other.</li><li>The 6x3mm magnets are usually a bit cheaper to get and when using only 2 of them on a bin you can get roughly the same holding force as with 4 6x2mm magnets. However they also interact more with the contents of your bins, when the content is magnetic or ferromagnetic.</li></ul></li></ul><h4>Accessories</h4><ul><li>The bins with the magnets go great with my version of the modular baseplates that can be equipped with ferromagnetic screws. This is cheaper than having to put magnets on the baseplate and you don't have to get the polarity of the magnets right. You can find the baseplates here: <a target="_blank" href="https://makerworld.com/en/models/25571#profileId-44132" rel="nofollow noopener">https://makerworld.com/en/models/25571#profileId-44132</a></li><li>The bins with also go great with my gridfinity tray. When using it you have a separating layer between the bins, that prevents the stronger 3x6mm magnets of interacting with magnetic content of the tray below. You can find the tray here: <a target="_blank" href="https://makerworld.com/en/models/25576#profileId-44175" rel="nofollow noopener">https://makerworld.com/en/models/25576#profileId-44175</a></li></ul><h4>Parametric source file</h4>The original parametric fusion360 file that Zack created did not work for me for bigger bins. I got errors and the final bin consisted of several objects. After hours of searching for the reason I found out that this is a bug/missing feature in fusion360. Fusion360 can only combine as many objects as were existing during the initial creation. The original file seems to be created with a 1x3 bin. That means there are problems for all bigger bins. So I re-created the fusion360 file with a bin size of 10x10. This means you will be able to create bins from 1x1 to 10x10 without errors. I decided to have the same parameters as in the original file to make it easy for users of the existing file from Zack to use this.Parameters to change without problemsThe following parameters can be changes within the given value ranges without causing problems with the provided fusion360 file.Note that you not only can add nubmers, but also fractions as parameters. This is useful for the slotsHigh parameter. In the original fusion360 file slotHigh “1” creates a 6U high bin. So if you want to easily have a bin with a specific gridfinity xU hight, you can just put in x/6 as the parameter.Changing other parameters than in the table below might work, but I did not test it.Fusion360 might need a while when you go for huge bins.<figure class="table"><table><tbody><tr><td>Parameter</td><td>Value</td><td>Description</td></tr><tr><td>slotsWide</td><td>1-10</td><td>width of the bin</td></tr><tr><td>slotsDeep</td><td>1-10</td><td>depth of the bin</td></tr><tr><td>slotsHigh</td><td>3/6 - 10/6</td><td>height of the bin</td></tr><tr><td>magnetThiccness</td><td>2.4 - 3.4</td><td>2.4 for 6x2mm magnets3.4 for 6x3mm magnets</td></tr></tbody></table></figure>Remove Magnet holesIf you do not want magnet holes on the bottom of the bin there is an easy way to remove them:Set the parameters screwTightDiameter and magnetDiameter to 0.01. This will not cause errors in the parametric file and make the holes so small your slicer will not recognize the holes any more.How to change parameters in fusion360<ul><li>Click on Modify>Change Parameters</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_oxquc1j593mo.png"></figure><ul><li>In the column Expression change the value of the parameter</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_522fbr1n7t9p.png"></figure><h4>Warnings</h4>The file will give you a warning for bins with a size less than 10x10. This is normal and expected.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_3qkdwheewu07.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_hjx80ggb1hz0.png"></figure>

Gridfinity standard bins with label + parametric file

Gridfinity

Saber3D

*Light Fury not included*&nbsp;Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;Follow our socials to see new models! &nbsp;<a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">https://www.instagram.com/saber.3d</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">https://www.tiktok.com/@saber3d</a> &nbsp;Flexi Toothless can Stand, Sit, and Flap Its Wings!&nbsp;It is a great print for those who love to fidget. It does not require supports and prints well in PLA.&nbsp;No Supports necessary!&nbsp;Not all filaments are created equal, If your having issues with wing joints, I suggest increasing or decreasing wing size by 1% until you have the desired fit.&nbsp;For personal non-commercial use only. Please do NOT redistribute the files to anyone else.&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;We really appreciate your support!&nbsp;Please share images of your prints, we love to see them!

Flexi Toothless Dragon (3MF Multi-color)

dragon

logwave

PushButton Box für den Original SmartPusher Bored with smartphones and voice control? Go back to the roots with real buttons to control your smarthome!SmartPusher is a wifi enabled button array wich lets you control your smarthome via MQTT in different ways. Functions:<ul><li>Click</li><li>LongClick</li><li>DoubleClick</li><li>Down and Up</li><li>Fancy light ring animations</li><li>OLED screen</li></ul><a target="_blank" href="https://github.com/Blueforcer/SmartPusher" rel="nofollow noopener">GitHub - Blueforcer/SmartPusher: SmartPusher is a wifi enabled button array wich lets you control your smarthome in different ways</a>&nbsp;Maße: 100x80x45 (LxBxH ) Wandung: 3mm Die Box hat auf der Innenseite 2 Bohrungen für die Wandbefestigung und eine optionale Vorfräsung für eine Kabelführung durch die Rückwand. Die Bohrung auf der Unterseite ist 4mm.&nbsp;Die Box wird zusammengeklickt. Eine Verschraubung von Ober- und Unterteil ist nicht notwendig.&nbsp;

PushButton Box SmartHome

Button Box

3DPrintCraft

A funny sign that can be fixed to your workshop, work station, door etc. Printed on the X1C using 3 colours, facedown print on the Textured plate.

Funny Workshop Sign

Signs

Loop Layer 3D

Dyson V15/V12/V11/V10/V8/V7 Accessory Wall Mount - Holder - two models left and right with two hooks

Dyson Accessories Wall Mount two hooks

Home

Aurillion

Update 05.Feb.2024 : I have added an STL with 0.1 mm narrower arm connections in case there are problems with it being too tight.Loving bear Valentine's Day greeting - 3D Kit Card&nbsp;Description:🐻💖 Surprise your loved one with this adorable 3D kit card model - the perfect gift for Valentine's Day! This cute bear holds a heart that says "Happy Valentine". But that's not all! I've also added an additional model where you can add your own text to the heart using the Bambu Slicer - be it a sweet love saying or a personal message like "Love u".&nbsp;🌈 Multicolor design: The diverse color options allow you to adapt the model to your loved one's preferences. Experiment with different filaments to find the perfect combination for your bear love.&nbsp;🧩 Easy to put together: The individual parts of this kit card are designed to be easily cut out and pinned together. The connections vary depending on the filament.&nbsp;💝 A gift with a heart: This 3D kit card is not only a sweet gift, but also a creative way to express your love. Add your personal touch and make this Valentine's Day unforgettable.&nbsp;Download the model now and get ready for a heartwarming surprise on Valentine's Day! 🎁✨

Valentine Kit Card

Valentines

Troysterr

<h2>Summary</h2>These are simple pinewood derby trophies that can be customized for your pack (or company, or whatever).The base, tire and plaque are all customizable using the Customize feature.&nbsp;Alternatively, you can download the .scad files and open them in OpenSCAD.&nbsp;If you want all 4 trophies, there are a lot of parts to print, but they are all relatively simple and need no rafts or supports.&nbsp;I uploaded wood bases for 2022, 2023 and 2024. For future years, use the Customize feature.<h2>Print Settings</h2>The tire is customizable and I printed mine by printing most of it with black filament, then paused the printer when the lettering starts and swapped out for white.&nbsp;The plaques were printed similarly: Print the first few layers in a metallic filament, then pause and switch for black.&nbsp;Of course, you could also paint the parts, but I happen to have all the right filaments (including metallic gold, silver, bronze, and copper), so I didn&#39;t use any paint (although I did stain the wood bases).&nbsp;The filaments I used:<ul><li>Amolen Dark Wood Walnut: Wood base</li><li>Overture PLA+ Black: Plaques, tires, seat belt</li><li>FlashForge White: White lettering on tires</li><li>MIKA3D Shiny Silk Silver and Copper: Metal risers and plaque lettering for 2nd place and Safest Driver, wheels, seat belt buckle</li><li>Amolen Bronze: Metal riser and plaque lettering for 3rd place</li><li>YOUSU Silk Gold: Metal riser and plaque lettering for 1st place</li></ul><h2>Post-Printing</h2>The only part that I processed after printing was the wood base. I printed it using a filament that contains wood particles, then stained with a penetrating stain.&nbsp;Once all the parts are printed, just super glue them together.<h2>How I Designed This</h2>The tires for the trophies in the photo were NOT customized using OpenSCAD. I designed them in Fusion 360 with the PACK 20 text and exported and printed them.&nbsp;To make the tire customizable, I created a copy in Fusion 360, removed the top line of text, exported to .stl., converted the .stl file to OpenSCAD and added code to make the top line of text customizable.

Pinewood Derby Trophies

Pinewood Derby

Lalboys Design and 3D Printing

Gift cards are boring. Need a way to make them more exciting while also being obnoxious? This is the model for you!&nbsp;Funnily enough, I didn't have a gift card to put inside but it should fit any generic sized gift card. <ul><li>Print 1 of the top files (window or not windowed), 1 of the bottom files, and the spacer.<ul><li>I would only do 1 of the windowed parts at a time, otherwise they can just get the info off the back and that would ruin the fun.</li></ul></li><li>Put everything together using a socket wrench</li><li>If you are going to have them open it with the 3d printed wrench, I would use that to do the final tightening, so that you don't overtighten.</li><li>For the wrench, you should not have any issues with using PLA, as long as you use 3+ walls.</li></ul>The Fusion 360 files are included, so you can make any changes or add a personalized message.&nbsp;3D Printed Bolts, Nuts and Washers are included. These aren't as strong so try not to overtighten them. &nbsp;If you don't want to print them, you'll need the following hardware:6x 5/16 x .75 inch bolts6x 5/16 nylon lock nuts6x 5/16 washers (optional)

Evil Gift Card Torture Box with 3D Printable Nuts and Bolts 

Gift Cards

PolyZone3D

Milwaukee Keychain

Milwaukee

SPStudio

This fix is for users with one end of the Bambu Ams Cable have a 90 degree bend. If one of your connectors end have an 90 degree angle bend then please carry on and read.<figure class="image image_resized" style="width:20.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2023-12-15_36b42fdf7e911.png"></figure>&nbsp;If your Ams cable comes with straight connectors on both ends on the same cable then please proceed to <a target="_blank" href="https://makerworld.com/en/models/93201#profileId-99622" rel="nofollow noopener">V2 Straight Connector Ams Buffer Right Ptfe Guide Mount - Failed To Pull Back Filament</a> https://makerworld.com/en/models/93201&nbsp;&nbsp;<h4>I update, revise and improve my design for my fixes very often. Please only use my Print Profile (Labelled as Designer or SPStudio) to ensure this fix is updated & work well. Profile with Non-Designer tags may be of poor functionality or non updated model.</h4>Click on Like if this model helped you in some way. It is very important and will help increase the exposure of this design to more people who might need it. Cheers!&nbsp;&nbsp;&nbsp;<blockquote>AnnouncementNew and Improved V2 Versions for the Ams Buffer Fix <a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">Before Buffer</a> and <a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">After Buffer</a> have just been released. Do check them out in my profile to see what are the improvement. Thank you for your continuous support.<figure class="image image_resized" style="width:33.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2023-12-21_db335e9276f41.jpg"></figure></blockquote><h2> </h2><h2>Introduction</h2>Failed to pull back filament error can be caused by multiple different variables & factors. This is a part of an series of Ams fixes that i have designed which can complement each other when used together. I do suggest you install all my fixes together for the 0ptimal effect to help your filament travel properly across the entire system which in turn can help improve, reduce or remove any potential Ams errors.&nbsp;I have grouped all fixes into their respective Collection for ease of searching what to install.&nbsp;V2 Collection are improvements done on the shortcoming of V1 Collection. Feel free to try V2 Collection and if it doesn't work properly then you can try the V1 Collection. You can easily find each of the Collection by clicking on the Collections tab on my profile.&nbsp;Unfortunately there isn't a single fix that can 100% work for everyone. What works for others, may not work for you but my fixes is definately a great place to start and have worked for majority of the users. My fixes are precisely measured then modelled. A Proper Fix would have the highest chance to reduce or solve the error.&nbsp;<figure class="image image_resized" style="width:81.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2024-01-09_cd9c426e40212.jpg"></figure><h2> </h2><h2>If you are too bored to read the entire lengthy write up explaining the need for this fix, here is the TL:DR.</h2>&nbsp;What is this? V2 Ams Buffer Ptfe Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder. Its design is accurately measured to let the Ptfe tube be as level as possible at the Ams buffer to allow the most smooth, least amount of friction and pressure for the proper angle to go into the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.&nbsp;&nbsp;Who needs this fix? I believe that anyone with a Ams would benefit from this fix / enhancement regardless of do you have any problem or errors with the Ams / Printer. This will allow your Ptfe tube to be nearly 100% straight (laser and manually measured) when it enter or exit the Ams Buffer. In theory, there are only advantages and benefits after installing. There are literally no disadvantage to this fix.&nbsp;&nbsp;Main Difference with the previous model <a target="_blank" href="https://makerworld.com/en/models/58543#profileId-60340" rel="nofollow noopener">Ams Buffer Ptfe Right Guide Mount Fix</a><ol><li>Completely New Design</li><li>Will not affect your warranty as its reversible</li><li>Extremely ez installation yet still precise and accurate</li><li>Very well supported with an clever groove on the fix pushing and stabilizing the fix onto the rear panel with the tension by lock clip below the cable connector</li><li>Precise measurement to hold Ptfe tube straight for reduced friction of filament moving through. See installation video how i casually just throw a spirit measure after install and its just levelled itself.</li><li>Greatly help to reduce Ptfe wear and tear with its small surface contact</li><li>Friction is further reduced when the Ptfe move through the fix, another benefit of its small contact area</li><li>Use it with or without the rear spool holder without affecting its alignment</li><li>No screws needed for the install</li><li>No possibility for wrong installation with its new design</li><li>Uses less than 6 gram of filament</li><li>Will not work if you are using the Multi Ams Hub. (If you are using the Ams Hub for the Mini as an splitter it is ok and will work properly for you)</li></ol>&nbsp;&nbsp;Why choose this fix?Surely there are similar fixes in the market but most of them are merely holders instead of proper fixes, I will explain why.&nbsp;Current offerings have problems like complicated installation, an flimsy clip on design with totally no support and a really huge hole for the Ptfe to pass through offering 0 proper alignment at all, poor or non existent support, bulky, uses screws, some cannot be used with rear spool holder and most of them create wear due to long travel which the Ptfe have to go through. Many of the fixes that doesn't even try to align the Ptfe travel properly at all&nbsp;So this V2 solved all of these issue with a tiny 5.5grAms of Filament.&nbsp;Remember like all our other fixes, We don't want any movement to pass through filament as it wears them down and if we really have to then i made the contact surface small so it will reduce the wear drastically.&nbsp;Once again as with all my fixes, this is very precisely measured and designed. I have taken measurements down to 0.10 degree (measuring the outgoing angle out of the buffer) despite stating this fix as nearly 100% straight because there could be as small as maybe below 1mm deviations with every single machine due mass production.&nbsp;The fix will hold the Ptfe Tube level with the Ams Buffer to allow the filament to pass through with a smooth movement with the least amount of friction.&nbsp;&nbsp;<h2>Prerequisites</h2>Before install, Please check if your connector looks like this. Most of us should have this 90 degree connector version that connect to the printer. If you have this please carry on with the install.&nbsp;If you have the straight connector on both ends, please go to <a target="_blank" href="https://makerworld.com/en/models/93201#profileId-99622" rel="nofollow noopener">V2 Straight Connector Ams Buffer Right Ptfe Guide Mount - Failed To Pull Back Filament</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2023-12-14_04ed944bffe4a.png"></figure>&nbsp;<h2>Installation Video</h2><figure class="media"><div data-oembed-url="https://youtube.com/shorts/jsHsIZMdjkk"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=jsHsIZMdjkk"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/jsHsIZMdjkk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;&nbsp;&nbsp;<h2>What Mod / Fixes / Enhancement do i offer?</h2>Please don't download the wrong one. Only those in the photos below is designed by me who painstakingly took a lot of time to measure carefully and design just to get it working. #SupportOriginal Love you guys for all the support so far!&nbsp;- <a target="_blank" href="https://makerworld.com/en/models/47982" rel="nofollow noopener">Ams FIX Failed To Retract Filament Error (a preventive measure and solve the bay 2 and 3 error and prevent bay 1 and 4 to have any possibility of having an error due to tension and friction)</a> (Updated design on the 2nd photo below, try 1 then if it doesn't works properly for you then install the other one.)&nbsp;<figure class="image image_resized" style="width:74.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2024-01-10_2e40f9b49d622.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/56906" rel="nofollow noopener">(BRAND NEW) Ams Filament Pull Back Fix V2 Upgraded - Completely New Design Upgrade For Ams Filament Pull Back ERROR! Precisely Measured</a>&nbsp;<figure class="image image_resized" style="width:75.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2024-01-10_9c729f1a3501a.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/52782" rel="nofollow noopener">- Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:75.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2024-01-10_14c8811c47696.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">- V2 Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:76.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2024-01-10_6194006084695.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/53037" rel="nofollow noopener">- Ams Fix - Stack the Ams on tp (Using a carefully measured holder to hold the Ptfe in a curved angle that will allow filament to go through with the least possible amount of friction when the Ams is stacked on tp of the printer)</a>&nbsp;<figure class="image image_resized" style="width:77.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2024-01-10_e6ff2df6c7873.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/58543" rel="nofollow noopener">- Ams Buffer Ptfe Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder.</a>&nbsp;<figure class="image image_resized" style="width:78.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2024-01-10_f95cf24ce5c9e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">- V2 Ams Buffer Right Ptfe Guide Mount - The Fix For Failed To Pull Back Filament a newly improved fix designed to replaced the V1 This will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder. ez Installation. No screws needed!</a>&nbsp;<figure class="image image_resized" style="width:79.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2024-01-10_6ddf689393292.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/63021" rel="nofollow noopener">- Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:82.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2024-01-10_4c9e59fa5529e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/103987" rel="nofollow noopener">- V2 Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:81.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2024-01-10_69d2ccb8ac279.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/67779" rel="nofollow noopener">- The Smooth 4 Way Splitter. Look No Further. Combined with Ams Hub Lite together with this small attachment, you will have the Smooth 4 Way Splitter.</a>&nbsp;<figure class="image image_resized" style="width:83.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393321/2023-11-19_96f9eed020e9b.gif"></figure>&nbsp;<h2>Technical Write Up</h2>Friction - The cause of most of the Ams filament failed to retract problem. Bends or pressure on the shape of the Ptfe tube in turn creates a lot of friction, as the Printer and Ams is equipped with multiple sensors, these friction will cause filament not passing through the Ams to the printer smoothly and thus causing the Ams Failed To Retract Filament Error and similarly related errors.&nbsp;&nbsp;So what is the possible solution to the problem? Firstly we need to reduce friction for filament passing through Ptfe tubes? Simple! If we optimise the angle of the Ptfe it will allow the filament to enter and go through the Ams buffer with the least amount of friction and pressure.&nbsp;&nbsp;What do i need in additional to installing this printed fix part? Nothing.&nbsp;<h2>Additional Notes</h2>The error itself is complicated and non definitive. Whatever cause the error today might not be the same area that cause the error again, same with person A and Person B setup, as the error itself is mainly due to tension with friction triggering the sensors in the machine.&nbsp;I would suggest you download and try and install all my fixes together for the proper effect as together they will ensure a smooth delivery of the filament with much lesser friction (read write ups) and hopefully that will help and reduce or resolve the error. If you use only one or 2 of the fixes the error could still happen as there are still other area might still be causing excessive friction.&nbsp;

V2 90 Degree AMS Buffer Right PTFE Guide Mount - Failed To Pull Back Filament Error Fix

Printer Mods

TheBear

&nbsp;Every party needs a little bit of noise - and especially New Year's Eve!&nbsp;Most of all already know the Party Horns you can buy at different stores around New Year's. But it has never been possible to 3D-print one at home - until now!Introducing the World's First 3D-Printable Functional Party Horn!&nbsp;After nearly 60 iterations and tests, I have finally succeeded with creating a Party Horn that actually produces sound which mimicks that of the store-bought ones, while also remaining easy to print!This means that no supports are needed, as I have carefully designed the interior to avoid briding as much as possible. The mouthpiece itself is print-in-place and ready-to-go!&nbsp;<h2>Assembly (10 seconds)</h2>While the mouthpiece itself doesn't require any assembly, you might need to free the vibrating pin, by sliding your finger across the top, if your retraction settings aren't 100% spot-on and a little bit of stringing has occured.Like so:<img src="https://makerworld.bblmw.com/makerworld/draft/320783/2023-12-07_a4ef5d282e6f3.gif">&nbsp;&nbsp;The cone is assembled by inserting the pins/pegs into the holes. Afterwards, you simply drop the mouthpiece down into the cone, line up the pegs with the holes, and pull it a bit, until the pegs pop out and the mouthpiece is secured.Like so: <img src="https://makerworld.bblmw.com/makerworld/draft/320783/2023-12-07_2321f35197db9.gif">Now you simply have to blow into the mouthpiece, and sound comes out - just like a regular party horn! If sound doesn't come out, or if it sounds a bit “wrong”, you can try holding the pin back for a few seconds to very slightly “bend” it a bit. &nbsp;<h2>Print settings / Tips&Tricks</h2>If you're not using a Bambu Lab printer, or if you decide not to use my Print Profiles, here are a few things, you need to know:<ul><li>A brim is highly recommended for the mouthpiece, as it is quite slim.</li><li>Use 0.4mm wall thickness (This is to ensure the pin is the right thickness).</li><li>For the “Cone, with Strands”, please use 3 walls at least - otherwise the first layer might not be quite right.</li><li>I highly recommend using Archimedean Chords as the Top Surface for the cones - this increases their strength significantly when bending, as no lines are 100% parallel to the bend.</li><li>Ensure your retraction settings are on-point! The pin is printed right in the middle, and it is absolutely crucial that it moves - otherwise no sound is generated when blowing into the horn!</li></ul>I have only tested the mouthpiece in PLA and PLA+.The cone has been tested in PLA, PLA+ and Silk PLA.&nbsp;&nbsp;&nbsp;&nbsp;And just for fun, a picture of the iterations and tests I went through (in no particular order):<img src="https://makerworld.bblmw.com/makerworld/draft/320783/2023-12-07_9ba113385634f.jpg">&nbsp;&nbsp;Remixing is currently not allowed, as I have quite a few designs for the cones, which I will be uploading gradually.I do allow you to add your own text on the cone in the slicer - you just cannot upload it as a remix currently.&nbsp;&nbsp;

Party Horns - Fully Printable! (New Year)

New Years

Yokoprints3D

Embrace the magic of the season with our 3D-printed snowflake design digital file, a joyful addition to your holiday celebrations that will bring warmth and happiness to your family festivities. Let it snow with a touch of technology!&nbsp;Simple and easy to print. Customize them with your favorite colors. Compatible with any 3D printer. Happy printing guys! <a target="_blank" href="https://cults3d.com/en/users/Yokoprints3D/3d-models" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/152285/2023-11-04_2aa817bb5e06f.png"></a> Pls drop by to check my other works Plate Placement <img src="https://makerworld.bblmw.com/makerworld/draft/152285/2023-11-04_fbbda5ba12e0a8.png"><img src="https://makerworld.bblmw.com/makerworld/draft/152285/2023-11-04_aed416a573576.png">&nbsp;Size 70mm with 2.5mm height (Thickness) <img src="https://makerworld.bblmw.com/makerworld/draft/152285/2023-11-04_9e15d70494b148.png">Renders <img src="https://makerworld.bblmw.com/makerworld/draft/152285/2023-11-04_6e8c62d5de858.png"><img src="https://makerworld.bblmw.com/makerworld/draft/152285/2023-11-04_afd758e188ea18.png"><img src="https://makerworld.bblmw.com/makerworld/draft/152285/2023-11-04_1b75655325c108.png"><img src="https://makerworld.bblmw.com/makerworld/draft/152285/2023-11-04_804ea6b789ab7.png">

CHRISTMAS SNOW FLAKES - SET OF 14 WITH COMMERCIAL LICENSE

Christmas

MEAF designs

Forget about those awkward moments when you leave your drink to go to the toilet and when you come back you find a table full of the same colour cups without knowing which one was yours. Either to protect yourself from covid or to take care of the environment by using only the necessary, don't let this happen to any of your guests again.&nbsp;This dispenser keeps your cups stacked wherever you need them while offering a convenient and easy way to keep a sharpie handy so everyone can label it with their name.Is designed to fit cups from 2.5 to 4inches in diameter. and tested with fine point sharpies and the normal point ones.&nbsp;You can choose between two versions: <ul><li>smooth = that looks great on any filament color </li></ul>or<ul><li>wood = with engraved details that simulate wood and looks perfect on brown or wood filament</li></ul>&nbsp;&nbsp;PRINTING SETTINGSMaterial: PLA / PETGLayer height: 0,2 - 0,28 mmNozzle diameter: 0,4mm or 0,6mmInfill: 10-12%Perimeters: 2Support: NO&nbsp;&nbsp;I added a “flag” that you can attach to the sharpie, so everyone know exactly what to do. you just need to print it in the same orientation that the original file (same as shown in photos) with no supports and paint the letters with the same sharpie. &nbsp;You can paint it with different colors, but I think is to slow and much filament for what it is.&nbsp;&nbsp;PAINTING TIP FOR THE FLAGsome filaments or layer heights are not very suitable for “drawing on it” so once is printed you can give it a thin layer of transparet nail polish or spray paint and then paint the letters with the same sharpie you will use for a better result.&nbsp;<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_1h9l5b6t2dvi.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_eoomjxzxlzgu.png"></figure>&nbsp;&nbsp;&nbsp;You can check all my models here<a target="_blank" href="https://www.printables.com/social/281168-dgoalva/models" rel="nofollow noopener">dgoalva | Printables.com</a>&nbsp;&nbsp;&nbsp;&nbsp;

PartyCup dispenser and sharpie holder

Cool Stuff

porco0321

Uses filament sample cards as per <a target="_blank" href="https://www.printables.com/model/16322-filament-sample-with-box" rel="nofollow noopener">remixed model</a> and <a target="_blank" href="https://www.printables.com/model/502547-filament-sample-generator-no-commercial-tool-requi" rel="nofollow noopener">this</a>, for Bambu Lab AMS- 4 slots to display. Printed with 100% infill, laid on its back with no support, on Bambu Lab P1S.Slowed print to 50% speed with 100% aux and part cooling fan for overhangs.Used double sided tape to attach. Fits snug.

Filament Sample / Marker Display for Bambu Lab AMS

Filament Samples

agepbiz

Print-in-place and Articulated Surprise Egg #2 - Tiny Fork Lift 'Making of' video: <figure class="media"><div data-oembed-url="https://youtu.be/n72DtZDfMU0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/n72DtZDfMU0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;*edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock (fits 3x1mm, add a drop of glue)Stresstest your 3D Printer by printing this tiny collectable stocking stuffer.Both the fork lift and the egg was each designed to be printed in place without any support structures. The fork lift has rotatable wheels and a liftable fork. The egg is hinged&nbsp;<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a>Twitter: <a target="_blank" href="https://www.twitter.com/agepbiz" rel="nofollow noopener">https://www.twitter.com/agepbiz</a>&nbsp;Surprise Egg #1 - Tiny Haul Truck: <a target="_blank" href="https://makerworld.com/en/models/13916" rel="nofollow noopener">https://makerworld.com/en/models/13916</a>Surprise Egg #2 - Tiny Fork Lift: <a target="_blank" href="https://makerworld.com/en/models/13917" rel="nofollow noopener">https://makerworld.com/en/models/13917</a>Surprise Egg #3 - Tiny Wheel Loader: <a target="_blank" href="https://makerworld.com/en/models/13918" rel="nofollow noopener">https://makerworld.com/en/models/13918</a>Surprise Egg #4 - Tiny Excavator: <a target="_blank" href="https://makerworld.com/en/models/13919" rel="nofollow noopener">https://makerworld.com/en/models/13919</a>Surprise Egg #5 - Tiny Fire Truck: <a target="_blank" href="https://makerworld.com/en/models/13920" rel="nofollow noopener">https://makerworld.com/en/models/13920</a>Surprise Egg #6 - Tiny Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13931" rel="nofollow noopener">https://makerworld.com/en/models/13931</a>Surprise Egg #7 - Tiny Car Carrier: <a target="_blank" href="https://makerworld.com/en/models/13922" rel="nofollow noopener">https://makerworld.com/en/models/13922</a>Surprise Egg #8 - Tiny Racecar: <a target="_blank" href="https://makerworld.com/en/models/13923" rel="nofollow noopener">https://makerworld.com/en/models/13923</a>Surprise Egg #11 - Tiny Harvester: <a target="_blank" href="https://makerworld.com/en/models/13924" rel="nofollow noopener">https://makerworld.com/en/models/13924</a>Surprise Egg #12 - Tiny Steamroller: <a target="_blank" href="https://makerworld.com/en/models/13925" rel="nofollow noopener">https://makerworld.com/en/models/13925</a>Surprise Egg #13 - Tiny MiG Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13929" rel="nofollow noopener">https://makerworld.com/en/models/13929</a>Surprise Egg #14 - Tiny Dump Truck: <a target="_blank" href="https://makerworld.com/en/models/13927" rel="nofollow noopener">https://makerworld.com/en/models/13927</a>Premium designs:Surprise Egg #9 - Hollow Egg <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg</a>Surprise Egg #10 - Hollow Dragon Egg: <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg</a> WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.<h3>Print instructions</h3><h3>Category: Toy & Game Accessories Print Settings</h3>Rafts: NoSupports: NoResolution: 100 micronsInfill: 40%