md.prozac

AroW

I designed minimalistic hand fan which will be very helpful during hot summer days or on the beach :) 20 pcs of wings needed For A1 mini print plate with wings 10 times. All other printers print plate with wings 2 times.  Additional materials needed:<ul><li>needle and thread</li><li>glue (to secure pin cap)`</li></ul>Assembly:It’s a little bit tricky and take some time but final effect is worth it.&nbsp;First put all wings on pin and secure them with pin cap(you can use glue to secure connection).&nbsp;It’s time to use needle and thread. I created a big knot at the end of thread to be sure that thread don’t escape through hole.&nbsp;Starting from bottom of wing you need repeat the pattern (numbers are holes which you should put needle):&nbsp;<img class="image_resized" style="width: 64.78%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490942/design/2024-06-10_d216a7418c0328.jpeg">  1 (from bottom) 2 (from top)1 (from bottom)2 (from top)&nbsp;3 (from bottom)2 (from top) 3 (from bottom)2 (from top)3 from bottom)&nbsp;Take next wing and repeat process:1 (from bottom) 2 (from top)1 (from bottom)2 (from top)&nbsp;Align top one wing edge with bottom wing hole (no 3). Gentle pull the thread to be sure it everything is stiff and stable then repeat steps:3 (from bottom)2 (from top) 3 (from bottom)2 (from top)3 from bottom)&nbsp;<img class="image_resized" style="width: 63.59%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490942/design/2024-06-10_64f7fc3135497.jpeg">  Repeat for all wings. Last wing should be secured same way as first.&nbsp;Enjoy :)

Hand fan Voronoi

RDesigns

The Allround Box V1.5 OUT NOW! <a target="_blank" href="https://makerworld.com/en/models/492885#profileId-406546" rel="nofollow noopener">https://makerworld.com/en/models/492885#profileId-406546</a>This is the older Version of “The Allround Box”!Please switch to the new one, if you don&#39;t need replacements parts from this site.&nbsp;-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;&nbsp;The box is assembeld with pieces of filament, so screws arn&#39;t needed anymore!&nbsp;If the filament falls out of the hinges, glue the ends a little with super glue.&nbsp;For the sealing, TPU can be used.&nbsp;Attention:Pay attention to the comments in the parametric design in Fusion 360!&nbsp;Release Notes:27.03.2024<ul><li>The V1 avaliable now!<ul><li>Screws are replaced trough small pieces of Filament that perfectly fit in!</li><li>The Design in Fusion 360 is Parametric, most of the dimension can be changed.</li><li>The Latch design stands out with it&#39;s wheels, which lock into place perfectly!</li></ul></li></ul>31.03.2024<ul><li>Update V1.2!<ul><li>Some model issues fixed.</li><li>Better fit for non sealed boxes.</li><li>Filament holes widened</li></ul></li></ul>05.04.2024<ul><li>Update V1.3<ul><li>Some parametric design issues fixed.</li><li>TPU seal geometry more water resistant</li></ul></li></ul>12.06.2024<ul><li>Version 1.5 OUT NOW!</li><li>You can find it here: <a target="_blank" href="https://makerworld.com/en/models/492885#profileId-406546" rel="nofollow noopener">https://makerworld.com/en/models/492885#profileId-406546</a></li></ul>&nbsp;

Rugged Storage Box V1 (Parametric, Screwless) 

MalcTheOracle

<h3>Problem</h3>You need to access the BL website quickly, but, you do not wish to bother typing and have little space to carry around the perfect solution.<h3>Solution</h3>The BL website QR Code key ring 0.2mm nozzle lets you take a touchless solution everywhere. Add it to your key chain, scan it with a phone, and jump straight to the website.<h3>Friends &amp; Family</h3>This isn&#39;t just the perfect solution to your problem, it is the ideal solution for anyone near you, let them scan it and give them the joy only this sort of success could deliver.<h3>Technology</h3>This is achievable with a 0.2mm nozzle and the tiniest amount of filament. The 0.4mm nozzle isn&#39;t capable of producing a scannable QR Code.&nbsp;Look at the second image to see the differences in the quality achieved using the 0.2 mm nozzle.

BL website QR Code key ring 0.2mm nozzle

Keychain

Collecticraft

<h2>Interlocking Toroidal Vases: A Minimalist Masterpiece</h2>Step into the world of minimalist elegance with our latest creation: the Interlocking Toroidal Vases. This innovative set of vases features a toroidal design, seamlessly interlocking with each other to create a mesmerizing and unique visual form. Crafted with precision and attention to detail, these vases are a true testament to the beauty of simplicity in design.<h3>Key Features:</h3>Toroidal Design: Inspired by the torus shape, these vases boast a sleek and modern aesthetic that is both captivating and versatile. The interlocking design allows for endless configurations, making it easy to customize and adapt to any space.&nbsp;Minimalist Elegance: With clean lines and a minimalist silhouette, these vases exude understated elegance. Whether displayed individually or as a set, they make a striking addition to any home decor.&nbsp;Versatile Usage: Perfect for showcasing fresh blooms, dried flowers, or simply as standalone decorative pieces, these vases offer endless possibilities for styling and arrangement. Use them to add a touch of sophistication to your living room, dining area, or workspace.&nbsp;Elevate Your Space: Transform your home decor with the Interlocking Toroidal Vases. Whether displayed as a set or individually, these vases add a touch of modern elegance to any space. Elevate your interior design and create a statement-worthy display with this minimalist masterpiece.&nbsp;Join the Movement: Join us on <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patreon</a> to gain access to exclusive designs, commercial license, including the Interlocking Toroidal Vases and other innovative creations. Your support allows us to continue pushing the boundaries of design and craftsmanship. Let's create something extraordinary together! ✨🏡

Interlocking Toroidal Vases: A Minimalist Masterpiece

Vase

daddy poco

D1 mini（ESP32、ESP8266）と、センサー類がおさまるケースです。写真のセンサーケージに入っているのは、3cm x 3cm のユニバーサル基盤です。エアセンサーなどを納めてつかってみてください。&nbsp;This case holds D1 mini (ESP32, ESP8266) and sensors.The sensor cage in the photo is a 3cm x 3cm universal board.Try using it to hold an air sensor or the like.

ESP mini D1 Case with sensor cage

Curious Mint

Lost a brick? Print spare Lego compatible parts on your 3D printer! Print the model for the part you're missing to complete your set. Some parts might need supports & I suggest 40% infill. A few of the parts, are sadly missing. If anyone models them let me know and I'll add them to the set!Bricks are broken down by their hex color for printing in a matching color.Good accuracy is required to produce Lego compatible bricks, watch <a href="https://www.youtube.com/watch?v=GUz4YCnuNOQ" rel="nofollow">this YouTube video</a> if you're having trouble.&nbsp;DisclaimerLEGO®, the LEGO logo, the Minifigure, and the Brick and Knob configurations are trademarks of the LEGO Group of Companies which does not sponsor, authorize, or endorse this.

Star Wars First Order Heavy Assault Walker - Lego

Lego

SabreDesign

Modern Pen Holder stand to hold and display up to three pens in a stylish modern way.&nbsp;Easy print, can hold pens up to 150mm wide&nbsp;If you want to support me you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<img src="https://makerworld.bblmw.com/makerworld/draft/836520/2023-12-30_2b9c4c54fc7a9.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836520/2023-12-27_4dd127cfa82f5.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836520/2023-12-27_2951845da928b.png">

Pen Holder

EPIQ3D

UPDATE 08 June 2024:Pistachio Bowl 2.5 has been released - <a target="_blank" href="https://makerworld.com/en/models/488822#profileId-404395" rel="nofollow noopener">check it out here</a>--------------------------------------------------------------------------------------------------------- — No support needed — — A pistachio bowl reinvented — Unique stylish design, crafted to be used, but also seen.2 in 1 function. Complete the collection, and check out the bowls little brother - Pistachio Cup So, how does it work, whats so speciel.Well.. not much ;) but the idea is, that when you dispose of the empty shells, you put them in the hole (nothing new there).BUT- when the spot beneath gets overcrowded of sheels, dont rattel the bowl - just turn the top to a new spot.If shelled nuts is not for you, then the bottom part can also be used as a standalone bowl And, its pretty … Holds about 250 grams

Pistachio bowl 2.0

Kitchen

Kazikk

<h3>Slim Arduino Uno Case</h3>&nbsp;<h4>Overview:</h4>-This sleek, two-part case is specifically designed to house and protect an Arduino Uno. It's compact and streamlined, ensuring your Arduino remains secure and accessible.<h4>Assembly Instructions:</h4>- Required Hardware: A single 3m screw and a 3m hexagonal nut. - Screw Holes Design: Screw hole features a solid layer to ensure overhangs print with precision and durability. Remove after printng!&nbsp;<h4>Key Features:</h4>- Slim Profile: Minimizes space without compromising on protection. - Durable Construction: Ensures your Arduino Uno is safe from dust and damage. - User-Friendly Design: Simple to assemble and easy to open when required.&nbsp;<h4>Support and Feedback:</h4>If you like the design, you can buy me a coffee here: <a target="_blank" href="https://www.buymeacoffee.com/kazikg" rel="nofollow noopener">https://www.buymeacoffee.com/kazikg</a>Encountered any issues or have suggestions? Feel free to leave a comment below. I'm here to assist and continuously improve this design. Your feedback is invaluable! :)

Arduino Case

Amorin

I modeled a simple clothes dryer repair clutch. -Nut M3 -M3x16 screw Our dryer has a wire diameter of 2.5 mm and a tube diameter of 12,5 mm

Clothes dryer clutch

Repair

Syphander

I was not happy with the pendant shades that were originally on this fixture so I designed new ones. These are printed in Bambu PLA Basic blue-grey, Bambu PLA matte grey, and Bambu PLA matte white.

Pendant lamp shade

Light

Mo2408

<h2>Summary</h2>An early Version of the german „Sturmgeschütz 3“ assault gun in 1:56 scale (Bolt Action).<h2> </h2>&nbsp;&nbsp;&nbsp;

Stug 3b Tank

Models

Veracon Engineering

📢 Exciting Addition: Now Featuring a Stylish Lid!🛁 Introducing Veracon Engineering&#39;s 3D Printed Soap Dish with Voronoi Design Inlay and Lid!In our continuous quest to enhance your bathroom experience, we are thrilled to announce the latest upgrade to our soap dish: a sleek and functional lid! Elevate your soap storage solution with added elegance and practicality.🌟 Key Features:• Enhanced Design: Our soap dish now comes complete with a stylish lid, providing a seamless solution for keeping your soap clean and dry between uses.• Versatile Functionality: Enjoy the convenience of a lid that not only preserves the freshness of your soap but also adds a sophisticated touch to your bathroom decor.• Customizable Options: Personalize your soap dish and lid combination with a wide array of color and material choices. Match your bathroom decor effortlessly while expressing your unique style.• Snap Fit Inlay: The snap-fit inlay ensures secure attachment, allowing for easy removal of both the dish and lid for hassle-free cleaning.🛁 Upgrade Your Bathroom Ambiance Today!Experience the perfect blend of style and functionality with Veracon Engineering&#39;s innovative soap dish and lid combination. Elevate your daily grooming routine with precision-engineered solutions designed to exceed your expectations.Transform your bathroom into a sanctuary of elegance and convenience. Choose Veracon Engineering—where every detail is crafted with your utmost satisfaction in mind.&nbsp;For Commercial use please visit my <a target="_blank" href="https://www.patreon.com/user/posts?u=125133059" rel="nofollow noopener">Patreon</a>.&nbsp;If you like the print profiles, please consider rating them. Thanks :-)

Soap Dish with Lid Voronoi Design

Bathroom

Tutto 3D

this is a simple Spacemouse macro keyboard, with wrist restkey are programmable for use with more program like Autodesk Fusion 360, Blender, ecc..i use arduino pro micro like HID and 6x6 tactile button for create matrix keyboard<a target="_blank" href="https://youtu.be/KIvErNAAH8s" rel="nofollow noopener">https://youtu.be/KIvErNAAH8s</a>BOM:set micro screw M2, M1,5: arduino pro micro: <a target="_blank" href="https://www.amazon.it/gp/product/B07J2Q3ZD5/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B07J2Q3ZD5&linkId=7a2e1d6d065d56b8e623cc1e9b0de471" rel="nofollow noopener">https://www.amazon.it/gp/product/B07J2Q3ZD5/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B07J2Q3ZD5&linkId=7a2e1d6d065d56b8e623cc1e9b0de471</a>tactile button 6x6mm: <a target="_blank" href="https://www.amazon.it/gp/product/B07J2Q3ZD5/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B07J2Q3ZD5&linkId=7a2e1d6d065d56b8e623cc1e9b0de471" rel="nofollow noopener">https://www.amazon.it/gp/product/B07J2Q3ZD5/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B07J2Q3ZD5&linkId=7a2e1d6d065d56b8e623cc1e9b0de471</a>3DConnexion Spacemouse wire: <a target="_blank" href="https://www.amazon.it/gp/product/B07J2Q3ZD5/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B07J2Q3ZD5&linkId=7a2e1d6d065d56b8e623cc1e9b0de471" rel="nofollow noopener">https://www.amazon.it/gp/product/B07J2Q3ZD5/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B07J2Q3ZD5&linkId=7a2e1d6d065d56b8e623cc1e9b0de471</a>or3DConnexion Spacemouse wireless: <a target="_blank" href="https://www.amazon.it/gp/product/B07J2Q3ZD5/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B07J2Q3ZD5&linkId=7a2e1d6d065d56b8e623cc1e9b0de471" rel="nofollow noopener">https://www.amazon.it/gp/product/B07J2Q3ZD5/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B07J2Q3ZD5&linkId=7a2e1d6d065d56b8e623cc1e9b0de471</a>for detail follow on my Instagram page: <a target="_blank" href="https://www.instagram.com/mztutto3d/" rel="nofollow noopener">https://www.instagram.com/mztutto3d/</a>

macro keyboard for Spacemouse

Keyboard

Wing-Art

The Cable Bundle Clip provides a convenient way to bundle and keep cables tidy. This innovative accessory is particularly suitable for office environments where efficient organization of connecting elements is crucial. For maximum flexibility, there are two options available: one with cable separation and one without, both for either adhesive or screw attachment:<ul><li>V1 without separation </li><li>V2 with separation for better cable allignment</li></ul>___&nbsp;Der Cable Bundle Clip bietet eine praktische Möglichkeit, Kabeln zu bündeln und sie ordentlich zu halten. Dieses innovative Zubehör ist besonders geeignet für Büroumgebungen, in denen die effiziente Organisation von Verbindungselementen von entscheidender Bedeutung ist. Für maximale Flexibilität stehen zwei Versionen zur Auswahl: eine mit Kabeltrennung und eine ohne, beide jeweils zum Kleben oder zum Schrauben:<ul><li>V1 ohne Trennung</li><li>V2 mit Trennung für bessere Kabelausrichtung</li></ul>&nbsp;

Cable Bundle Clip - Screw or Glue (Two Versions)

Cable

PAPA Emeritus IV

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #13 (1.2mm) swap to Blue At layer #14 (1.28mm) swap to Gray At layer #20 (1.76mm) swap to Jade White for the rest.

Elephant Hueforge

Hueforge

Bassahaulic

Fuzzy Skin 30mm Reference Blocks. With one rounded corner, one 45° corner, and two 90° corners. Simply to be able to feel and see the differences. Photos are Bambu PLA Basic Grey printed at .16mm layer height.

Fuzzy Skin Reference Blocks

Calibration

K2_Kevin

A snoot is basically a tube that goes over the front of your light/flash unit and creates a hard, concentrated beam of light. A snoot allows you to light your main subject – without lighting the surrounding scene. And this can be great for dramatic, low key photography.Light Modifier - SNOOT Fits the Neewer RGB61 and ULANZI VL49 RGB Video Lights.&nbsp;PRINT INSTRUCTIONS: Print with supports for the bottom notch and inside lip only.&nbsp;

Light Modifier - SNOOT for ULANZI VL49 and Neewer RGB61

Photo

Matthew Ghost

NEW IMPROVED VERSION <a target="_blank" href="https://makerworld.com/en/models/415150#profileId-317228" rel="nofollow noopener">TILT PHONE STAND V3.0</a>&nbsp;The stand allowing you to comfortably and securely hold your mobile phone at the optimal viewing angle.<ul><li>Designed for printing completely without supported!</li><li>You will need glue (Superglue for plastics). It is necessary to connect the parts (02_Gear_Stand_Left + 03_Gear_Stand_Right) together.</li><li>Its possible that the gap between the base and the tilt gear will be too large. This will cause a slip. To prevent slipping, I recommend sticking the electrical tape on the guide (Base). Or you can also add a layer of glue on the contact surface and let glue dry.</li><li>Otherwise, if the connection is too rigid, it is necessary to grind the contact surface.</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/818723/2023-12-16_fe804a401913c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/818723/2024-01-10_dac2c51f4fc07.jpg">

TILT PHONE STAND

Phone

ddf3d.com

<div><h1>Summary</h1><div>So glad to share the design to you NEW Strong Flex door Carabiner <h2>Check out new ORIGAMI Carabiner ! (thing:1819242)</h2>It's a long process to make the previous design as perfect as it should be, and now the core design feature was mature enough to face on the new usability challenge. The new design come with only 2 parts, hook and door, very easy to assembly and easy to make different scale for your need. Scaled capacity of 75% to 120%Door Flexible Strength = 3 (check out the selflex introduce on <a href="http://www.ddf3d.com/" rel="nofollow">http://www.ddf3d.com/</a>)Check out the assembly film here: <a href="https://www.youtube.com/watch?v=7wZM2DuAc4U" rel="nofollow">https://www.youtube.com/watch?v=7wZM2DuAc4U</a> Check out the printable operation film here: <a href="https://www.youtube.com/watch?v=tjnVmANtvWk" rel="nofollow">https://www.youtube.com/watch?v=tjnVmANtvWk</a> Check out more cool design on <a href="http://www.ddf3d.com/" rel="nofollow">http://www.ddf3d.com/</a> Design for general FDM 3D printer print by PLA or ABS material. No additional support need, easy to print. Fast print design make general print time around 45-100 min. When print on scale 1, infill 50%, nozzle 0.4mm, shell loop 3, general can load 15-35kg load. The design can print without support and raft set. Layer high from 0.15mm~0.3mm is fine. Infill better to use over 50%. Hope you will like it ;) </div><h1>Print Settings</h1>Rafts: <div>Doesn't Matter</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.15mm</div> <pre><code> Infill: <div>50%</div></code></pre> Notes: <div>ABS is better than PLA on tensile load and flexible spring strength. When print on scale 1, infill 50%, nozzle 0.4mm, shell loop 3, general can load 15-35kg load. The design can print without support and raft set. Layer high from 0.15mm~0.3mm is fine. Infill better to use over 50%. Hope you will like it ;) </div><h1>How I Designed This</h1><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=QsJYL46oCqQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QsJYL46oCqQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe></div> </div> <div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=-GuSk6V4ZcY"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/-GuSk6V4ZcY" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe></div> </div> <div>Check out more cool design on <a href="http://www.ddf3d.com/" rel="nofollow">http://www.ddf3d.com/</a> </div><h1>Special Reward to Supporter</h1><img src="https://makerworld.bblmw.com/makerworld/draft/205918/2023-11-26_ddod9737fuu5.jpg" alt="image"> <div><h2>Special Reward to Supporter</h2>TIP us $5 and reward the "Classic Lock Carabiner" 3d printable file. We welcome your support by simple Tip to us, and we'll reward the "Classic Lock Carabiner" 3d printable file to you. If you are going to Tip us and get reward, please follow the step. 1) Tip us on Thingiverse $5 or more. 2) Send us a message on "ddf3d.com" contact, tell us your mail and thingiverse ID. 3) Receive the mail attachment the reward 3d file. Please Note: Please understand, we will send the file manualy ASAP, if you don't receive the mail in 12hrs, please contact us again. Thank you</div> <div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=W4e2gUbTutk"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/W4e2gUbTutk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe></div> </div> <div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=L2Kzo_WZv-g"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/L2Kzo_WZv-g" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe></div> </div></div>

*NEW* Strong Flex door Carabiner ddf3d Customized

Things to make

here is the 3d mouse project, with the dimensions of the 3d Connexion space mouse, to be inserted instead of the original spacemouse in my "macro keyboard for Spacemouse" project: <a target="_blank" href="https://www.thingiverse.com/thing:4884877" rel="nofollow noopener">https://www.thingiverse.com/thing:4884877</a>(code and wiring coming soon)between the joystick attachment part and the joystick itself you need a sponge disk (find the stl to see its dimensions)this is the bill material list:Joystick for Arduino: <a target="_blank" href="https://www.amazon.it/gp/product/B06WRRKS9G/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B06WRRKS9G&linkfa954bea954ba09baba95" rel="nofollow noopener">https://www.amazon.it/gp/product/B06WRRKS9G/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B06WRRKS9G&linkfa954bea954ba09baba95</a>Encoder for Arduino: <a target="_blank" href="https://www.amazon.it/gp/product/B06WRRKS9G/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B06WRRKS9G&linkfa954bea954ba09baba959b" rel="nofollow noopener">https://www.amazon.it/gp/product/B06WRRKS9G/ref=as_li_tl?ie=UTF8&tag=tut0b-21&camp=3414&creative=21718&linkCode=as2&creativeASIN=B06WRRKS9G&linkfa954bea954ba09baba959b</a><a target="_blank" href="https://www.amazon.it/ARCELI-Encoder-Sviluppo-Mattone-arduino/dp/B07RKTXS34/ref=pd_sbs_4/257-1817702-1924907?pd_rd_w=krrb9&pf_rd_p=100addec-b643-4151-aeb5-9ec7d592e710&pf_rd_r=79YPQMPZVX7XK6F2PE4J&pd_rd_r=db85b6af-b7cb-4ac2-b3da-1dc6aa7e750e&pd_rd_wg=AwMXV&pd_rd_i=B07RKTXS34&psc=1" rel="nofollow noopener">https://www.amazon.it/ARCELI-Encoder-Sviluppo-Mattone-arduino/dp/B07RKTXS34/ref=pd_sbs_4/257-1817702-1924907?pd_rd_w=krrb9&pf_rd_p=100addec-b643-4151-aeb5-9ec7d592e710&pf_rd_r=79YPQMPZVX7XK6F2PE4J&pd_rd_r=db85b6af-b7cb-4ac2-b3da-1dc6aa7e750e&pd_rd_wg=AwMXV&pd_rd_i=B07RKTXS34&psc=1</a>&nbsp;As code I use <a target="_blank" href="https://github.com/soemarko/DIY-Space-Mouse" rel="nofollow noopener">https://github.com/soemarko/DIY-Space-Mouse</a>

Mouse 3D homemade

Computer

Black Glovz

Halloween Lamp&nbsp;Even if it's looks a little complicated. Very easy to assemble. See third picture.&nbsp;All parts snap together tight, no need for glue. &nbsp;For printing use Clasic mode, not Arachne. I used Generic PLA profile, no calibration and they fit together.Can hold any size LED light&nbsp;

Halloween Handheld Lamp LED Lightbox

Decoration

Vixvvo 3D

I've crafted a versatile 3D-modeled desk drawer for you, a compact and customizable space where you can store anything you desire. The best part? It easily attaches with double-sided tape, providing a sleek and hassle-free solution.&nbsp;&nbsp;All Commercial License, Will be available on my Patreon "Vixvvo3D" For a Low Price of 6$/Month. (currently trying to post & model 1/Weeks) <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a>&nbsp;

Desk Drawer

Organization

squinn

Rest your book or tablet on this convenient stand, allowing you to keep your hands free while cooking, working, or studying. This is a completely print-in-place design, with the exception of the two small articulating arms which are designed with a bit of flex in them so that they can be snapped in post-print.&nbsp;The model is designed to fold flat, so that it can be easily transported in a bag or slid into a space on a shelf. When opened up it then offers a few different adjustable angles that it can hold a book or tablet at, or you can extend the support arm past the notches for a low angle viewing mode. The arms then have some intentional slotting built into the pivot joints so that they can be optionally used to loosely lock into place at various positions to help hold the pages of a book.&nbsp;In addition to the standard model (which is shown in most of the pictures), there are also versions that include three different sized plaques just above the center area. These allow you to conveniently customize your stand with text in the slicer, such as in the following picture:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-26_9e6f95ee3afd2.jpeg"></figure>

Foldable Book or Tablet Stand

Tool

neil3dprints

Please note this was a collab with Bambu Labs.The printer was provided free of charge for this project. Update 27/12/2022.I've made some amendments to the assembly guide PDF. Added some additional notes on the best way to print some of the parts as well as provided further detail to some sections of the installation process. I've also added a small L or R on the left and right side parts to help people distinguish between them for the MOD installation.I've also added step and stl files for blank ‘Round Side Parts’ in case anyone would like to add there own logo to them.Check out Uncle Jessy's build!&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/Gv7w95ECAoE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Gv7w95ECAoE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;This is your new best friend!!!The companion cube mod is a must have for any Bambu Lab P1P owner. And any portal fan.This is purely a aesthetic MOD. You do not need to touch the electronics at all!I've provided a detailed assembly guide as a downloadable PDF. Just download this as you download the STL's. And please please please follow the instructions. It's not a complicated build. Allot of it is common sense. But there will be some instructions that would prove useful to follow in a particular order. I also recommend giving it a quick read before you start printing all of the parts.You will also require superglue for this build.I recommend a couple of spools of grey PETG. A couple of white pla. And a small amount of pink pla. Just refer to the sheet below<figure class="table" style="width:462pt;"><table style="border:1px double var(--input-border);"><tbody><tr><td style="border-bottom-color:rgb(191, 191, 191);border-bottom-width:1px;border-left-color:rgb(191, 191, 191);border-left-width:1px;border-right-color:black;border-right-width:1pt;border-style:solid;border-top-color:rgb(191, 191, 191);border-top-width:1px;height:33pt;padding:0.4em;vertical-align:top;width:462pt;" colspan="3">As a reference each 1 KG spool carrys an average of 330 meters</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">Totals</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Required Material In Meters ( Approx )</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Grams ( approx )</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">White - PLA</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">618.48</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">1843.07</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">Grey - PETG</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">390.93</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">1192.34</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15.75pt;padding:0.4em;vertical-align:top;">Pink - PLA</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">47.72</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">142.21</td></tr></tbody></table></figure>All parts are printable on a Bambu Lab P1P.But I did print on the slowest setting on the P1P.If you would like to use an AMS with this MOD, I've been informed you can so with the below additional MODs installed.To sit the AMS unit on top of the printer with the Companion Cube Mod installed.<a target="_blank" href="https://www.printables.com/model/397718-p1p-ams-legs-companion-cube" rel="nofollow noopener">https://www.printables.com/model/397718-p1p-ams-legs-companion-cube</a>To help guide the PFTE tube.<a target="_blank" href="https://www.printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket" rel="nofollow noopener">https://www.printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket</a> PTFE Tube Y-Splitter. <a target="_blank" href="https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec," rel="nofollow noopener">https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec,</a> this way you can run either AMS or spool.&nbsp;If anyone has any questions or queries, even if you might think it is a stupid question, seriously, just ask me. Send me a DM through Prusa Printers and I will get back to you ASAP. I want people to be able to print this. So if anyone is having any problems, just reach out. I'll be happy to help where I can.If you want to stay up to date with anything I am working on and are perhaps interested in other projects I have in development, please check out my instagram or Twitter.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><a target="_blank" href="https://twitter.com/NHengist" rel="nofollow noopener">https://twitter.com/NHengist</a>Happy printing. ;-)Neil

Companion Cube P1P Mod ( Bambu Lab )

AMT_MW

<h2>What it is</h2>A four digit life counter with a small compartment inside, a screw on lid and detents for the number positions.It is part of a design family, so you do have a few options if you want it a bit different:<figure class="table"><table><tbody><tr><td>2 wheels</td><td><a target="_blank" href="https://makerworld.com/models/136387#profileId-148336" rel="nofollow noopener">3 wheels</a></td><td><a target="_blank" href="https://makerworld.com/models/136390#profileId-148342" rel="nofollow noopener">4 wheels</a></td></tr><tr><td><figure class="image image_resized" style="width:62.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/394742/2024-01-08_c088fc921dfab.jpg"></figure></td><td><figure class="image image_resized" style="width:50.05%;"><a href="https://makerworld.com/models/136387#profileId-148336" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/394742/2024-01-08_547b5c0ced69c.jpg"></a></figure></td><td><figure class="image image_resized" style="width:66.09%;"><a href="https://makerworld.com/models/136390#profileId-148342" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/394742/2024-01-08_692abd2283447.jpg"></a></figure></td></tr><tr><td>You are here :)</td><td><a target="_blank" href="https://makerworld.com/models/136387#profileId-148336" rel="nofollow noopener">Life Counter 0-999</a></td><td><a target="_blank" href="https://makerworld.com/models/136390#profileId-148342" rel="nofollow noopener">Life Counter 0-9999</a></td></tr></tbody></table></figure><h2>How to print</h2>For multicolor printing and convinience, a 3MF file is provided. There are several modifiers present, deactivate or change them to get your desired outcome.<figure class="image"><img src="https://media.printables.com/media/prints/709800/rich_content/a39f2575-9bcd-4dff-85f3-781f92a7e9df/thumbs/cover/800x222/png/image.webp"></figure>Recommended for printing is a layer height of 0.16mm and a 0.4 mm nozzle, but up to a layer height of 0.2mm and a 0.6mm nozzle the results have been surprisingly good as well.&nbsp;The optional text on the lid or Axle (like HP & XP) simply is added via the text shape tool of the slicer. Any font you have installed is possible.<figure class="image"><img src="https://media.printables.com/media/prints/709800/rich_content/dc4dd686-4908-4a4f-95a4-5a1a2b5d0e0f/thumbs/inside/1920x1440/png/image.webp"></figure>Material at one's discretion, I opted for PETG and 25% infill.Scaling it down is possible, smaller than 60% and the tolerances may be become a problem.<h2>Without MMU or AMS</h2>If not already printed as multicolor, nail polish or model paint works well to highlight the glyphs. For text on the axle or lid a manual filament swap is advised, using the text shape tool to emboss your text may also be an option.<h2>What next</h2>There may be improvements and modifications based on feedback given here.Maybe, take a look at <a target="_blank" href="https://makerworld.com/u/2797532051" rel="nofollow noopener">my other designs</a> ;-)

Fan

Box