mbnettles

ogldr

Simple self watering plat pot with floating water level indicator.Inner pot diameter: 8 cm.The reservoir is designed to hold approximately 100ml of water. It is possible, though not recommended, to fill a bit more.When using an organic/soil-based medium, a bottom layer of inert medium (perlite, pon, seramis etc.) is recommended to avoid waterlogged soil where the reservoir is in contact.<h2>Printing Directions</h2>These are the printing parameters I have used to achieve the product pictured above. YMMV.All parts were printed as oriented in the STL files. No supports are needed (overhang for the pot and indicator is 45°).The resulting print weighs a total of ~80g.Please feel free to upload your tweaked printing files for other printers and filaments.&nbsp;ReservoirLayer height: 0.2mmBottom layers: 4Top layers: 4Wall count: 2Infill: 20%Extrusion multiplier: 1.05&nbsp;PotLayer height: 0.2mmBottom layers: 4Top layers: 4Wall count: 2Infill: 100%Extrusion multiplier: 1.05&nbsp;&nbsp;IndicatorAs PLA has a higher density than water, the water level indicator must be hollow in order to float. I recommend printing this part in vase mode (spiralised outer contour).Layer height: 0.2mmBottom layers: 2Extrusion multiplier: 1.05

Self Watering Plant Pot

plants 

michelem

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-04-23_b4afa61493a71.png"></figure>A VERSATILE EVERYDAY COMPANION&nbsp;Imagine having a versatile tool that effortlessly fits into your pocket, ready to tackle an array of tasks.&nbsp;Meet the SmartBits – a compact marvel that seamlessly combines multiple functions in a sleek design.&nbsp;This tool serves as both a screwdriver and a bit holder, providing easy access to 8 different bits for various applications.&nbsp;Activating the tool is a breeze – a simple slide on the exposed bar causes the bits to extend from the opposite end. The magnet effortlessly guides them back into position. Never forget it open.&nbsp;Thanks to the additional embedded magnets, each bit is securely held in place, ensuring they remain steadfast whether you&#39;re on the move or storing the SmartBits in your pocket.&nbsp;It&#39;s the ideal companion for your everyday needs, effortlessly blending convenience and functionality.&nbsp;Print Instructions:&nbsp;Support is required for both the Base and the Slider. Please verify the 3mf file with Bambu Studio if there&#39;s any uncertainty.&nbsp;Place the Slider with the magnet holes on the build plate and add regular support.&nbsp;Position the Base with the side opening on the build plate and add regular support.&nbsp;There is an alternative version of the base with flat bottom you can print with it on the build plate, but it requires support too.&nbsp;No support is needed for the Button and Lid.&nbsp;I recommend printing everything with a minimum resolution of 0.16mm.&nbsp;Bill of Materials (BOM):&nbsp;You&#39;ll need some magnets and a few screws:<ul><li>12 magnets, 5 or 6mm x 2mm</li><li>4 screws, M3 Socket Head, 8mm</li></ul>Assembly Instructions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-15_7862deb2dfe4.png"></figure>Start with the base and insert 2 magnets into the two rectangular holes; no glue is required there.&nbsp;Next, with a bit of glue, add 1 magnet to the Base in the slider housing. Be cautious, as this magnet is the only one that needs attention to its side, opposite to the one you put in the center hole of the slider (to be attracted).&nbsp;Now, take the Slider and glue 9 magnets on the bottom holes; again, the center one must have the same side as the magnet you put in the base slider housing.&nbsp;Insert the slider into the base, add the lid, and tighten the lid screws.&nbsp;Finally, attach the button to the slider with the last screw.&nbsp;If the slider doesn&#39;t return to its position, slightly loosen the screws.&nbsp;If you want I added also a cord endcap to be printed, look at the pictures, insert the paracord or similar in the bottom hole of the Endcap_Base make one simple knot on both ends, finally close it with the Endcap_Lid.&nbsp;Also, take a look at the <a target="_blank" href="https://makerworld.com/en/models/134027" rel="nofollow noopener">Magnetic Pocket Screwdriver</a> I crafted.&nbsp;Hope you like it!&nbsp;(Got inspired by the Bit Bar by Big Design)&nbsp;Check out my other magnetic tools for your office:&nbsp;<figure class="table" style="width: 94.97%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="text-align: center"><figure class="image image_resized" style="width: 49.2%"><a href="https://makerworld.com/en/models/146614" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_b0f041b578fc2.png"></a></figure></td><td style="text-align: center"><figure class="image image_resized" style="width: 50.26%"><a href="https://makerworld.com/en/models/143760" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_bf112a67f1d5b.png"></a></figure></td></tr></tbody></table></figure><ul><li><a target="_blank" href="https://makerworld.com/en/models/146614" rel="nofollow noopener">The magnetic cable clips</a></li><li><a target="_blank" href="https://makerworld.com/en/models/143760" rel="nofollow noopener">The magnetic ScrewGuard</a></li></ul>

SmartBits - Magnetic screwdriver bits holder

random 

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.

plants

random

organization