maze17

Adamko

The classic ACCESS KEYCARD from the game Escape from Tarkov. For this print, you need to have AMS or other multi-color system. I would recommend a layer height of 0.08 mm or less. The card size is 85.6 x 54 x 0.8 mm. The original card <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433066/design/2024-04-18_ce5fb887ac13c.png">&nbsp;

Access Keycard (Escape from Tarkov)

escape

Kopp3D

An antique skull and crossbones lock and key. Lock opens when key is turned to the left, but if you pull hard enough it will pop open so don't use it for actual security! Prints in flat pieces, no supports needed. Mechanism all snaps together. The front and back plates with the skull and crossbones are optional and must be glued on. The key prints in two pieces and must be glued together. Use as a prop treasure chests!

Antique Skull Lock and Key (Functional)

cadenas

Thomas Jackson

Tree Frog

hugo

LoboCNC

This simple disc launcher prints quickly and easily in a fun kit card format. Just snap a disc into place and the launch it by pushing it forward through the gap in the fork. It flies surprisingly far! I've also included a plate with the separate parts if you want to print them separately, or for when you (inevitably) lose the discs.&nbsp;Assembly The launcher consists of just 3 parts: the springy launching fork, the two-fingered grip, and the thumb pusher. To assemble, first put the pusher piece over the grip as shown in the 2nd photo. Then tilt the fork into the rear hook as shown in the 3rd photo. Finally, just snap the fork flat, locked into place by the front hook as shown in the 4th photo.&nbsp;To load the disc, pull the plunger all the way back with your thumb, and then tilt the leading edge of the disc into the front inside edge of the fork as shown in the 5th photo. Then push it flat against the backstop on the plunger as shown in the last photo. Now you're ready to launch!&nbsp;Credit: There are a bunch of similar disc launchers, but the earliest design I could find of this type was from <a target="_blank" href="https://www.thingiverse.com/thing:578799/files" rel="nofollow noopener">davedelay on Thingiverse</a>. Let me know if you know of an earlier version.

Flying Saucer Launcher

gift card

trixs3D

Pencil holder&nbsp;<ul><li>without supports</li></ul>

Frog / pencil holder

pencil box

shoes

virtualisoftware

Under desk drawer, there are some holes for putting metal steel bars for reinforcement but are not necessary, up to 3mm diameter.&nbsp;Screw holes are M2.5x20mm, they are needed to attach the slider to the table.&nbsp;Print options:Resolution: 0.2Infill: 15%Ironing on the front panelPLA

Under desk drawer

under desk

mail.iou

Nichirin Samurai Sword miniThis is a telescopic sword inspired by the Nichirin sword in the Japanese manga "Demon Slayer: Kimetsu no Yaiba". This is a telescopic katana that is printed in parts and then assembled. You can choose to print different colors and strengths for different parts. The handle is capped to facilitate future maintenance and blade replacement. However, the disadvantage of this is that the printing time will increase. If you are sure that you can print an all-in-one print, you can refer to my previous telescopic knife work Reverse Blade Sword mini: <a target="_blank" href="https://makerworld.com/en/models/114630" rel="nofollow noopener">https://makerworld.com/en/models/114630</a>&nbsp;Notice It is recommended to use PLA+、PETG for printing. If your filament has insufficient strength, please increase the fill overlap to more than 40%.&nbsp;Assembly instructions: 1. Put the blades in order. 2. Close the handle cover.<img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_3dee38ac87bac.png"> 3. Push the fastener carefully.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_5fed3ee8af84b.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_9da5e647fb736.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_12ec4019f870e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501755/2024-01-12_947ac7f8b2c99.png"></figure></td></tr></tbody></table></figure>&nbsp;

Nichirin Samurai Sword

sword

Tekk3D

Under Desk Plate Holder (3, 4 & 5 Plates)&nbsp;with Drilling Template!

Plate Holder Under Desk (3, 4 & 5 Plates) with Drilling Template

bed plate holder

chats

Jochen R.

Small container holding up to 8 Q-Tips.

Q-Tip Travel Container

voyages

DrJones

A spinning top optimized for a good runtime, but without additional parts (e.g. bearing balls for the tip).Print with 100% infill. Some sanding of the tip helps a lot with the runtime.See print profile for additional small tweaks.

spinning top, >2 minutes, no additional parts

toupies

mobiobi

Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc.All motors and components are hot-swappable!Fusion and Step files included, for those that want.Especially pleased with the way the screw-caps hold and allow rotation.Ideas:1) Unless you have some servos with good torque, maybe use the 60mm arms only. 2.) Pic of little red elastic bands in the joints to dampen some of the vibrations.UPDATED 8 Mar 20211.) Servo struggling to survive the lower motor position, adapter plate and pin added for 28BYJ-48 stepper motor. 2.) Offaxis head mounts added to bring gripper closer to the last arm pivot point. 3.) Various minor mods for strength and usability.&nbsp;Might want to keep the print light, even as low as 5% and 2 perimeters, the SG90s might struggle with a heavy printed claw section.&nbsp;

Easy Robot Arm (SG90 servos & now steppers too) UPDATED 03/21

motors

Zarol_zz

<h2>Summary</h2>I designed a LEGO tissue box, For tissue boxes with max. 220 x 125 x 85 mmthe print profile have 2 version please check out printing instructions for details<h2>Printing Instructions:</h2>With AMS ver:you only had to print 2 parts to finish the project<ol><li>the lid</li><li>the main body</li></ol>without AMS ver:there have 3 parts in the print profileI finish this project without the the decorative frame, you can decided it whatever you like <ol><li>the lid</li><li>the frame body</li><li>the decorative frame</li></ol><h2>Assembly</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/318660/2023-12-28_7bbc1ef71f83f.gif"></figure>

LEGO tissue box

Tissues Box

Leo.w8

Introducing the Ultimate DIY Durable Tool Box – Your Next 3D Printing Project!&nbsp;Are you ready to take your 3D printing skills to the next level? I've designed a robust and versatile tool box model that you can easily print yourself, and the best part is, it's absolutely free for you to download and create at your convenience.Features:&nbsp;<ol><li>Sturdy Design: This DIY Durable Tool Box boasts a robust construction, ensuring it can withstand the rigors of your toughest projects. Crafted to last, it's built to store your cherished tools and equipment securely.</li><li>Hinged Lid: With two precision-engineered hinges, the lid opens and closes smoothly, providing easy access to your tools while keeping them safely contained when not in use. No more searching for your essentials; they'll be neatly organized and at your fingertips.</li><li>Comfortable Handle: The ergonomically designed handle ensures a comfortable and firm grip, making it easy to transport your tools to any job site or workspace. It's not only functional but also visually appealing, enhancing the overall aesthetics of your toolbox.</li><li>Customizable Fasteners: To assemble your DIY Durable Tool Box, all you need are a few standard fasteners. You'll require 2x M4x50mm screws for the handle and 4x M4x35mm screws for the hinges, which are readily available at your local hardware store. This customization allows you to choose the materials and finishes that suit your personal style and needs.</li><li>Ample Storage Space: Inside, you'll find ample storage space with customizable dividers to keep your tools neatly organized. Whether you're a professional tradesperson or a dedicated hobbyist, this toolbox is designed to accommodate your unique tool collection.</li><li>Durability and Longevity: The materials and design used in this toolbox are intended for long-term use, so you won't have to worry about wear and tear. It's a testament to my commitment to providing you with a high-quality product.</li></ol>Share Your Thoughts, I'd appreciate your ratings and reviews after you've successfully created and used this DIY Durable Tool Box. Your feedback helps me improve and inspires me to keep creating innovative designs for the 3D printing community. Your input is invaluable to me, so please share your experience with our community.Now, it's time to roll up your sleeves and embark on your next 3D printing adventure. Download this free DIY Durable Tool Box model and enjoy the satisfaction of crafting your own reliable storage solution. Say goodbye to flimsy and expensive store-bought toolboxes – build the one that perfectly suits your needs. Get started today and experience the joy of making something exceptional with your own two hands!&nbsp;For the handle 2x M4x50mm For the hinge 4x M4x35mm &nbsp;&nbsp;

Tool Box

Toolbox

ddf3d.com

<div><h1>Summary</h1><div>So glad to share the design to you NEW Strong Flex door Carabiner <h2>Check out new ORIGAMI Carabiner ! (thing:1819242)</h2>It's a long process to make the previous design as perfect as it should be, and now the core design feature was mature enough to face on the new usability challenge. The new design come with only 2 parts, hook and door, very easy to assembly and easy to make different scale for your need. Scaled capacity of 75% to 120%Door Flexible Strength = 3 (check out the selflex introduce on <a href="http://www.ddf3d.com/" rel="nofollow">http://www.ddf3d.com/</a>)Check out the assembly film here: <a href="https://www.youtube.com/watch?v=7wZM2DuAc4U" rel="nofollow">https://www.youtube.com/watch?v=7wZM2DuAc4U</a> Check out the printable operation film here: <a href="https://www.youtube.com/watch?v=tjnVmANtvWk" rel="nofollow">https://www.youtube.com/watch?v=tjnVmANtvWk</a> Check out more cool design on <a href="http://www.ddf3d.com/" rel="nofollow">http://www.ddf3d.com/</a> Design for general FDM 3D printer print by PLA or ABS material. No additional support need, easy to print. Fast print design make general print time around 45-100 min. When print on scale 1, infill 50%, nozzle 0.4mm, shell loop 3, general can load 15-35kg load. The design can print without support and raft set. Layer high from 0.15mm~0.3mm is fine. Infill better to use over 50%. Hope you will like it ;) </div><h1>Print Settings</h1>Rafts: <div>Doesn't Matter</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.15mm</div> <pre><code> Infill: <div>50%</div></code></pre> Notes: <div>ABS is better than PLA on tensile load and flexible spring strength. When print on scale 1, infill 50%, nozzle 0.4mm, shell loop 3, general can load 15-35kg load. The design can print without support and raft set. Layer high from 0.15mm~0.3mm is fine. Infill better to use over 50%. Hope you will like it ;) </div><h1>How I Designed This</h1><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=QsJYL46oCqQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QsJYL46oCqQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe></div> </div> <div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=-GuSk6V4ZcY"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/-GuSk6V4ZcY" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe></div> </div> <div>Check out more cool design on <a href="http://www.ddf3d.com/" rel="nofollow">http://www.ddf3d.com/</a> </div><h1>Special Reward to Supporter</h1><img src="https://makerworld.bblmw.com/makerworld/draft/205918/2023-11-26_ddod9737fuu5.jpg" alt="image"> <div><h2>Special Reward to Supporter</h2>TIP us $5 and reward the "Classic Lock Carabiner" 3d printable file. We welcome your support by simple Tip to us, and we'll reward the "Classic Lock Carabiner" 3d printable file to you. If you are going to Tip us and get reward, please follow the step. 1) Tip us on Thingiverse $5 or more. 2) Send us a message on "ddf3d.com" contact, tell us your mail and thingiverse ID. 3) Receive the mail attachment the reward 3d file. Please Note: Please understand, we will send the file manualy ASAP, if you don't receive the mail in 12hrs, please contact us again. Thank you</div> <div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=W4e2gUbTutk"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/W4e2gUbTutk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe></div> </div> <div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=L2Kzo_WZv-g"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/L2Kzo_WZv-g" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe></div> </div></div>

*NEW* Strong Flex door Carabiner ddf3d Customized

carabiner

amos

Yes, it’s me again. After drawing the lightsaber file last time, this time I drew a samurai sword. It can also be used with the A1 MINI. Just make sure that the retraction positions are not on the same side. If you have any questions, you can ask me. I will try to help you solve it.-----------------------------------&nbsp;"I have received your questions. I am currently making changes to the parameters and conducting print tests. I hope that after the printing is completed, I can provide you with a smoother katana."&nbsp;-----------------------------------"I adjusted the angle at which the samurai sword extends, so it definitely won't turn into a flying knife. However, I still need everyone to be aware of this aspect when slicing. The areas marked with white dots must absolutely not overlap."&nbsp;&nbsp;like this is ok<img src="https://makerworld.bblmw.com/makerworld/draft/309536/2023-12-25_43c1c301da83b.jpg">&nbsp;&nbsp;this one maybe your knife won't slip<img src="https://makerworld.bblmw.com/makerworld/draft/309536/2023-12-25_ab68cdbaa21c9.jpg">&nbsp;&nbsp;

Samurai sword 

gadget

austinvojta

<blockquote><h3>Buy a printed cube from me directly: <a target="_blank" href="https://austinmakes.etsy.com/listing/1614801206/textured-fidget-infinity-cube-3d-printed" rel="nofollow noopener">AustinMakes.etsy.com</a></h3></blockquote>The latest and greatest fidget cube that you won't be able to set down! Prints in one piece and works right off the print bed.&nbsp;Redesigned ground-up following the success of <a target="_blank" href="https://makerworld.com/en/models/23734" rel="nofollow noopener">Yet Another Fidget Infinity Cube v2</a>, my latest version includes multiple shapes and fun new textures, plus hinges that are even smoother without the need for break-in!<h4>Variations</h4><figure class="table"><table style="border:2px solid hsl(0, 0%, 0%);"><tbody><tr><td style="border:2px solid hsl(0, 0%, 0%);text-align:center;"><figure class="image image_resized" style="width:34.88%;"><a href="https://makerworld.com/en/models/65426" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/338534/2023-11-15_832ffd9a07f34.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/65426" rel="nofollow noopener">Angled Pack</a> includes:<ul><li>no texture</li><li>honeycomb</li><li>knurled</li></ul></td><td style="border:2px solid hsl(0, 0%, 0%);text-align:center;"><figure class="image image_resized" style="width:34.98%;"><a href="https://makerworld.com/en/models/65442" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/338534/2023-11-15_b386df7193c3d.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/65442" rel="nofollow noopener">Rounded Pack</a> includes:<ul><li>no texture</li><li>concave</li><li>ribbed</li></ul></td><td style="border:2px solid hsl(0, 0%, 0%);text-align:center;"><figure class="image image_resized" style="width:34.88%;"><a href="https://makerworld.com/en/models/65448" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/338534/2023-11-15_43b7cd34fd3f6.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/65448" rel="nofollow noopener">Spherical Pack</a> includes:<ul><li>no texture</li><li>grooved</li><li>rippled</li></ul></td></tr></tbody></table></figure><h4>Printing tips</h4><ul><li>use 0.2mm layer height or lower to avoid hinges fusing</li><li>set vertical shells to 2+ perimeters for strength</li><li>try 100% infill for extra satisfaction!</li></ul>

Textured Fidget Infinity Cube: Angled Pack

fidget

tisanina

A cute key ring in the shape of Google Dino to remind us that the internet may not work at the worst times

Google Dino keychain

keychain

jpauquiert

One Piece Luffy

One piece

MBRS

I saw many people used my other creation, the standard desk cable holder, as a way to tidy up passing cables. Since I believe that model is not optimal for that use, I created this version which fits various sizes of cables and in bigger quantities. It is also thinner which makes it ideal behind desks. The size is universal and is compatible with desks up to 40 mm in thickness (though if you have a thicker desk, nothing stops you from scaling Z a little bit).Screw is now optimized and scaled 97.5% from the original model. Should fit nicely with a slight effort on first assembly. Print is quick, about 40 mins, and only uses 18 g of plastic for both clamp and screw. PLA resists fine for me, but you're free to try stronger materials.Let me know if you like it! (Supports in the print profile are very easy to remove, they can be removed in one pull.) 05/01/24 FIXED TOLERANCES

OPEN Desk Cable Management Holder / Organizer 

bureau 

Magic Studio 3D

"Stitch 3D Model" 🌟🌺 Embark on a whimsical journey to the enchanting world of Disney with this delightful Stitch 3D model! Inspired by the lovable character from Lilo & Stitch, this intricately designed piece will add a touch of intergalactic charm to your decor.&nbsp;This model does not yet contain the step file, so to import it into Bamboo Studio, you just have to select all the STLs and drag it to Bambu Studio!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/399219/2023-10-27_6aa316784592c.png"></figure>&nbsp;Bambu Studio Settings: The settings are just a recommendation, however you can print with the settings you are already used to using! • Preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 • Quality → Wall generator → Arachne • Quality → Wall transitioning threshold angle → 50º • Strength → Advanced → Infill/wall overlap → 20% • Quality → Advanced → Avoid crossing walls • Increasing retraction / reducing temperature can help reducing wisps • I recommend always starting with the lighter colors. Recommendations before and after printing:&nbsp; • Use textured PEI sheet • To make the hole for the USB cable input for the LEDs, you can do it with a soldering iron, drill a hole or you can do it with a slicer by adding a negative model in the place where you want to make the hole • For the pieces to give more light, I recommend using aluminum tape on the inside of the back cover • Be careful to clean the table well&nbsp;Materials and tools used to assemble parts:&nbsp; • Aluminum Tape for the back cover • Hot glue pistol to place in the spacing of the LEDs so they don't come off • Soldering iron to make the hole for the USB cable and/or to solder the LEDs with the USB cable with ON/OFF switch • White or RGB LEDs&nbsp;To find out the list of all the components I use, you can click on the link in my description, and you will find it in the first post!

Stitch Lightbox LED Lamp

Lightbox

bennny

I designed this Spool Adapter for the Bambu Lab AMS for my SUNLU spools, since none of the other adapters currently available fit it properly. This design utilizes the holes of the carboard spools to help lock the adapter in place as well as an anti-slip lip at the top (prints without supports) that will prevent the adapter from coming loose inside the AMS. I exported this as a high quality STL and as a result the curves on the outside have no flat edges and will spin easily inside the AMS. The model only uses 7g of filament.&nbsp;Check out my other cardboard spool adapters!<ul><li><a target="_blank" href="https://makerworld.com/en/models/89117#profileId-95395" rel="nofollow noopener">PolyMaker/PolySonic/PolyLite</a></li><li><a target="_blank" href="https://makerworld.com/en/models/93756" rel="nofollow noopener">Eryone</a></li><li><a target="_blank" href="https://makerworld.com/en/models/106277" rel="nofollow noopener">Overture</a></li><li><a href="PolyMaker/PolyLite/PolySonic" rel="nofollow">JAYO</a></li><li><a target="_blank" href="https://makerworld.com/en/models/122273#profileId-131739" rel="nofollow noopener">eSUN</a></li><li>Inland (coming soon!)</li><li>PolyTerra (coming soon!)</li><li>Duramic (coming soon!)</li></ul>

SUNLU AMS Cardboard Spool Adapter

spool

Makers Mashup

The 8 Bit Mural Maker brings pixel art to life for everyone, regardless of age or skill level. This interactive 3D printed sprite allows you to create your own 16x16 pixel designs using a vast array of colored filament options. From glow in the dark to vibrant neons, the possibilities for creativity are virtually unlimited. It offers a fun, educational activity for kids and students while providing a unique, retro-inspired decoration for any room. Whether wall-mounted, free-standing, or combined into larger murals, the 8 Bit Mural Maker is the perfect tool for exploring and exhibiting creativity through pixel art. 🖨️ Printing Tips&nbsp;Print the board with a brim for best success. Large layer height is OK! Must use a .4 nozzle. .3 layer height works well. Pixels can be printed with multiple at the same time. Around 24 is the right number on the build plate to prevent having failures. Mounts can be printed without supports as well. 🔗 Additional Information&nbsp;You can search for pre-built 16x16 icons that show you exactly how to make your favorite characters and art. Please share your creations on social media with the hash tag #8BitMuralMaker and tag @MakersMashup! I will repost any of your creations.

8 Bit Mural Maker - Pixel Art for everyone!

Pixel Art

Nils Kal

Want to have a cool place to put your headphone? Print yourself this nice retro item!All parts are seperated so you won't need a AMS, just print them in your desired colors.Assembly is pretty straight forward, just put all pieces together. May use a bit of glue.&nbsp;Happy printing!NK&nbsp;&nbsp;This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.

SNES Controller Headphone Stand - Retro Gaming Decor

supports de casque

Print4Gods

A box for Nintendo Switch game cartridges and micro SD cards in the design of a Super Mario Question BlockI've improved the print bed adhesion for a Perfect Print

Switch Game box in Mario Question Box Designs

Switch

JamesThePrinter

A pair of travel battery cases to hold either 4 AA or 6 AAA batteries. These cases do not use traditional threads. Instead, I have used a 6-start short thread for faster opening and closing.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Prusament Galaxy Silver PLA</li><li>Hatchbox Gold PETG</li></ul>&nbsp;

Travel Battery Case

battery

RockChewer

MODEL FIXED - USE DESIGNER PROFILE - Wasn't finding an easy to print model for ABS when looking for a desiccant drying tub for my Sunlu S1 dryer. This model utilizes no top or bottom layers and 50% triangle infill, along with diamond holes on the sides and bottom, to maximize moisture release. Enjoy!

Sunlu S1 S2 Desiccant Tub Dryer

Dryer

3djacobb

The perfect mask, Spider-man 2099 V2 helmet. Helmet fits beautifully on the head.If you have a problem with the size you will need to adjust the % of the model so that it fits you. The model is designed for a standard head diameter. :)For the front part namely slice 1 and slice 2 you need to raft at least 3 !!!!! this saves nerves and grinding to make the model fit well.The color combination is purely up to your imagination ! :)Have a nice printing :)

Spider-Man 2099 V2 Helmet V3

masques

Arduino

MrDolos

My First Remix! Long print but looks incredible!

Red Skull Death Trooper - Star Wars

etoiles

radim.kabatek

Bee entrance. Use UV stable material.

Bee entrance

Abeilles

andrzeju

<h2>Honey-Comb shelves</h2>Please scale to the size you need ;)

Honey-Comb shelves

déco

JayRay

This is the original #3DBenchy directly from Creative Tools. Not a download of a download, nor all the slightly modified versions found elsewhere (ie, BambuLab Studio, Printables, etc…)&nbsp;I would like to introduce the #3DBenchy to Maker World. During the close beta period, there was no #3DBenchy available to send to the printer from the phone app so I uploaded it here. &nbsp;Please add your profiles as you see fit for the community to use to run tests. Thanks!&nbsp;Community members have provided a ton of different profiles. I hope you find one that fits your testing needs. Remember, a bad Benchy print could mean your filament calibrations are off, or a sign of mechanical error (for Bambu Printers.)&nbsp;All models uploaded and the below content is extracted from 3Dbenchy.com.<figure class="media"><div data-oembed-url="https://youtu.be/_epwuDI9FBI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/_epwuDI9FBI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="image"><a href="http://www.3dbenchy.com/features/" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy__Low-slope_surfaces_1-300x300.png"></a></figure>#3DBenchy is designed to offer a large array of challenging geometrical features for 3D printers, and touch on different issues related to additive manufacturing.The 3D model is designed to print at 1:1 scale without support materials. It is challenging for most 3D printers but the small volume (15.55 cm3) typically prints in well under two hours and does not require much material.The different surfaces of the #3DBenchy model reveal typical issues regarding surface finish, model accuracy, warping, etc.Visit <a target="_blank" href="http://www.3dbenchy.com/sample-page/features/" rel="nofollow noopener">this link</a> to see a complete list of each feature and correspondent descriptions.<figure class="image"><a href="http://www.3dbenchy.com/dimensions/" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_about_features-300x287.png"></a></figure>Use #3DBenchy to test and calibrate your 3D printer by adjusting hardware and software settings for optimal results.The shape and size of this 3D model is designed to challenge 3D printers. Compare your #3DBenchy results with the dimensions illustrated in <a target="_blank" href="http://www.3dbenchy.com/dimensions/" rel="nofollow noopener">this link</a>. These are easy to measure with a caliper.Print and check your 3D-printer’s result for dimensional accuracy, tolerances, warping and deviations related to changes in printing parameters and material types.&nbsp;<h2>Features</h2><figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_page_features_main_image.png"></figure>#3DBenchy is designed to offer a large array of challenging geometrical features for 3D printers, and touch on different issues related to additive manufacturing.The 3D model is designed to print at 1:1 scale without support materials. It is challenging for most 3D printers but the small volume (15.55 cm3) typically prints in well under two hours and does not require much material.The different surfaces of the #3DBenchy model reveal typical issues regarding surface finish, model accuracy, warping, etc.Please see a complete list of each feature and correspondent descriptions below.&nbsp;<h2>The Hull</h2>The hull is a large, smooth overhanging curved surface that is challenging to 3D-print, and clearly reveals any surface deviations.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_hull_curved_overhang-300x300.png" alt="Feature_hull_curved_overhang"></figure>&nbsp;<h2>Symmetry</h2>#3DBenchy is perfectly symmetrical which makes any skewness and warping easy to detect.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_symmetry-300x300.png" alt="Feature_symmetry"></figure>&nbsp;<h2>High-Resolution STL file</h2>The STL file is triangulated at a very high resolution which yields smooth surfaces. The maximum deviation from the original CAD file is set to 0.001 mm.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_high-res_stl_mesh-300x300.png" alt="Feature_high-res_stl_mesh"></figure>&nbsp;<h2>Planar Horizontal Faces</h2>The top surfaces of the deck, box and chimney are planar, horizontal and parallel to the bottom plane.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_planar_horizontal_faces-300x300.png" alt="Feature_planar_horizontal_faces"></figure>&nbsp;<h2>Tiny Surface Details</h2>If you have a high-resolution 3D printer, this is where you can shine! The letters on the stern are less than 2 mm tall and the thickness of #3DBenchy’s nameplate is just 0.1 mm.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_3DBenchy_nameplate_tiny_detail-300x300.png"></figure>&nbsp;<h2>Cylindrical Shapes</h2>The chimney is designed to define concentrical cylindrical shapes with inner and outer diameters. These clearly show deviations in roundness.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_conentrical_cylindrical_shapes-300x300.png" alt="Feature_conentrical_cylindrical_shapes"></figure>&nbsp;<h2>Overhang Surfaces</h2>Overhang issues are the Achilles’ heel of 3D printing. #3DBenchy offers several challenging areas such as in the difficult-to-reach inside of the bridge.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_overhang_bridge-300x300.png" alt="Feature_overhang_bridge"></figure>&nbsp;<h2>Low-Slope-Surfaces</h2>Low-slope-surfaces clearly show the layered structure of 3D printing. If printed horizontally, #3DBenchy’s gunwale and roof of the bridge will reveal the layer-steps.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_low-slope-surfaces-300x300.png" alt="Feature_low-slope-surfaces"></figure><h2>Large Horizontal Holes</h2>The rear window offers a large circular horizontal hole and the boat’s wheel offers a round difficult-to-reach secluded feature.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_large_horizontal_hole-300x300.png" alt="Feature_large_horizontal_hole"></figure>&nbsp;<h2>Small Horizontal Holes</h2>The hawsepipe represents a small short horizontal hole and has a very thin flange against the hull.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_hawsepipe_small_hole-300x300.png" alt="Feature_hawsepipe_small_hole"></figure>&nbsp;<h2>Slanted Small Holes</h2>The fishing-rod-holder provides a very small slightly-slanted blind hole.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_fishing-rod-holder_slanted_small_hole-300x300.png" alt="Feature_fishing-rod-holder_slanted_small_hole"></figure>&nbsp;<h2>First-Layer-Details</h2>The shallow letters at the bottom of the boat clearly reveal typical first-layer-squashing.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_shallow_letters_bottom_plate-300x300.png" alt="Feature_shallow_letters_bottom_plate"></figure><h2> License</h2><figure class="image"><a href="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_frontpage_slider_sea_v041.jpg" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_frontpage_slider_sea_v041-1024x402.jpg"></a></figure>&nbsp;#3DBenchy by <a target="_blank" href="http://creative-tools.com/" rel="nofollow noopener">Creative-Tools.com</a> is licensed under a <a target="_blank" href="http://creativecommons.org/licenses/by-nd/4.0/" rel="nofollow noopener">Creative Commons Attribution-NoDerivatives 4.0 International License</a>. Permissions beyond the scope and typical usage examples are explained below.&nbsp;<h2>Feel free to …</h2><ol><li>… download the <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a> and 3D-print it as you please.</li><li>… give away and even sell 3D-prints of the <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a>.</li><li>… <a target="_blank" href="http://www.3dbenchy.com/share/" rel="nofollow noopener">publish</a> images and videos of your 3D-prints – you own them!</li><li>… redistribute the unmodified <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a> as you please. Such as hosting your own downloads, attaching to emails, including the file on DVDs, USB-sticks, and in software distributions, bundling the STL or pre-sliced print file with 3D printer kits, etc.</li><li>… experiment, be inventive and creative! We made #3DBenchy as a tool for playing around with and testing 3D printers. Improve your skills and challenge your machine and its software. Try every setting, variation and material you can think of!</li><li>… modify #3DBenchy for personal use. Feel free to publish texts, images and videos of your experimentation (these are your work and you own them!). Please respect the above list items regarding not distributing modified STL files of #3DBenchy.</li></ol><h2>Consistency</h2>#3DBenchy is designed to be a calibration tool for testing 3D print settings and comparing the performance of different 3D printers. Therefore it is important that the same unmodified <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">STL</a> file is consistently used for this purpose.<h2>Attribution</h2>We designed the little #3DBenchy boat and this expanding web page to help 3D printer operators on this planet to better navigate the vast sea of 3D printing possibilities!It is also meant to be a fun object to experiment with and discover 3D printing. If you enjoy #3DBenchy and the content on this site, please give us attribution in your publishings. Simply include the word <a target="_blank" href="https://www.google.se/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=%233dbenchy" rel="nofollow noopener">#3DBenchy</a> and the URL <a target="_blank" href="http://3dbenchy.com/" rel="nofollow noopener">3DBenchy.com</a>. The team behind #3DBenchy highly appreciates your help!

BENCHY

tests

MKCAMC

I designed this modular spice rack to be stacked as high as you need it. Then a lid is placed on to to allow you to place items on top of the rack. It can be kept on the counter of in the cabinet. All of the pieces interlock well and there is no need for glue. Each section has slots for 4 bottles and a slot for small bags of spices. No supports are required for this print. I tried to make it as efficient as possible to reduce the amount of filament it takes to print each section. It only uses 177g of filament per section. Each slot is 52mm in diameter. If you would like to scale it for larger jars, you can use that as a point of reference.

Modular Spice Rack

cuisine

3D Prints This Week

Load black and yellow into AMS.&nbsp;If you don't have AMS&nbsp;Start with black and swap to Yellow at layer 7.&nbsp;If you enjoyed the file and want to show us some love, feel free to buy us a cup of coffee in the link below.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Pacman Retro Art / Video Game / Wall Art / 2d art

wall art

Sevro

This is my hipster mask.It consist of beard connected with glasses and detachable hair.&nbsp;In print profile, model is colored like on photos from bottom side so you can have additional texture effect from textured plate You can of course change color as you want. In print profile there also two type of earholder. Short one and long one. Start with short one and if it is too short print long one.Whole project is developed version of my Cool Sunglasses, so you can paint on the sunglasses glare as you like. Below is example.<a target="_blank" href="https://makerworld.com/pl/models/90886#profileId-97247" rel="nofollow noopener">https://makerworld.com/pl/models/90886#profileId-97247</a>&nbsp;&nbsp;Have fun&nbsp;&nbsp;&nbsp;&nbsp;

Hipster mask

3DPrintWell.co.uk

I redesigned the classic Hook and Loop game to be easy to 3d print. Fishing line not included!

Hook Game!

Jeux

OSUVENSE

Model Remix (Please read it all)&nbsp;Box dimensions: 160x153x150mm.&nbsp;There are some parts, you can print a mix of them to make the desired amount/design you prefer (i uploaded some pictures like an example, but my choice is the cover one):&nbsp;- “Cajón”, the box.- “Conector” connector to join the shelf to the frame, i make it like this so the shelf can be printed easily.- “Escuadra”, the shelf so you can hang it to the wall, you can skip this part and the connector if you plan to put it on the desk.- “Estructura agujeros”, a variation on the frame with two holes, you can print this one if you want to secure it more screwing some frames, i added one of these each 3 of the others.- “Estructura”, the frame, you need one of them for every box.- “Tapa”, top piece, you need one of these for every column, and you can screw it too to the wall.&nbsp;&nbsp;The holes for the screws are 5mm width. You can glue the pieces together if you want, but i dont find it necessary, and prefer to leave it unglued if i want to make a different form.

Stackable Drawer System

tiroirs

Milicjovan

It's quite useful if you want to make close up video clips to look better. Overall this design works pretty well and I have already made a lot of nice shots with it.Parts list:-Arduino-28byj-48 stepper motor with driver-3x 608 bearing (8x22x7mm) -2 screws to mount the motor-on/off switch (optional)&nbsp;Contact me if you need arduino setup instruction or code!

3d scanning rotary plate (photography)

3d scanner

BrandedAbstract3D

<h3>Model</h3>Drinks coaster set designed to resemble Brembo Racing Brakes, unique and functional, great for any workshop, desk, or garage. It's a great conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you'll need:<ul><li>1 x Caliper (printable)</li><li>4 x Brake Discs (printable)</li><li>4 x Display Screws (printable)</li><li>1 x Brembo Vanity Plate (printable)</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I'm a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I've had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls and top layers to around 50mm/s seems best.&nbsp;<ul><li>Caliper: Use a 15% rectilinear infill—it's sturdy enough to hold all four of the coasters. And, I set the seam position to “back”. Essentially can't see any of the seams from the front.</li><li>Brake Disc: Gone for a 5% infill, saving print time. I also read that a lot of the thermal transfer gets stopped by air so the more holes in the coaster the better (especially when using hot drinks) so I figured less infill could = less melted PLA. From the PLA I've used hot drinks work great on these coasters, the contact patch between the coaster and the cup/glass is actually remarkably small and hasn't melted anything at all! The bottom surface pattern is concentric to give it that super-consistent smooth look and the top layer is Archemedian Chords I find this gives the discs a nice partially worn look.</li><li>Display Screws: Use a 15% infill. This part is mostly for show and serves no real use other than aesthetics. I use a standard PEI Plate and haven't had a problem with them being knocked over while printing. If you do I'd suggest using a brim and that'll fix that issue.</li><li>Brembo Vanity Plate: There are two Brembo branded plates that you can stick on to the caliper. You can use CA glue to attach it, and it'll work perfectly. One plate has the Brembo logo upside down, simulating how it would be on an actual brake caliper. The other plate is right side up, making it easier to read the branding when the coaster is on your desk.</li></ul>Assembly is straightforward; you can easily get it from the photos. Insert the display screws into the holes, adding a dab of glue before inserting them. Apply some glue to the Vanity Plate and attach it to the front; it's super simple to align.&nbsp;Happy Printing!

Brembo Drinks Coaster Set

Coaster

chameko小廢物電波塔

<blockquote>NOTE! This model requires additional materials! 1.Spring 2.lubricant grease(suggestion)</blockquote>&nbsp;11/19Versions with springs of different sizes have been added. The original S size is used by default. You can also select M and L sizes in the “option file” according to your needs.<img src="https://makerworld.bblmw.com/makerworld/draft/188878/2023-11-19_039cc1c2b0182.png">&nbsp;When I was in school, I always liked to play with the buttons of the ball pen. It was such a feeling that I couldn’t stop using it!! Until someone tells you you are too noisy hahaha.&nbsp;I studied the structure of the ball pen and made it into a small button.<img src="https://makerworld.bblmw.com/makerworld/draft/188878/2023-11-16_bd2e2951a4068.png">&nbsp;The assembly part only needs to be assembled from left to right in the order of 1. Body 2. Button 3. Internal structure 4. Spring 5. Base plate.It is recommended to apply some 3D printer lubricant grease on the internal structure of the third.<img src="https://makerworld.bblmw.com/makerworld/draft/188878/2023-11-16_98649cea08571.png">&nbsp;Press the bottom plate firmly and rotate it counterclockwise to lock.<img src="https://makerworld.bblmw.com/makerworld/draft/188878/2023-11-16_96addd3d0fe0f.jpg">&nbsp;&nbsp;I use uxcell springs with a diameter of 6mm and a height of 15mm.(S size) There is extra space in the design, as long as the height meets 15mm.<a target="_blank" href="https://www.amazon.com/dp/B076LNJF5Q" rel="nofollow noopener">US Amazon</a><a target="_blank" href="https://www.amazon.co.jp/gp/product/B074T6R6QN" rel="nofollow noopener">JP Amazon</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/188878/2023-11-16_3a85983013722.png">&nbsp;In addition, I have also prepared many different versions of text and graphics. You can choose the one you like in the “option file”.<img src="https://makerworld.bblmw.com/makerworld/draft/188878/2023-11-16_146a265b51bc9.png">&nbsp;Come and follow me and press this button!&nbsp;<blockquote>----------中文解說----------</blockquote>11/19追加了不同尺寸的彈簧的版本. 預設使用S原始尺寸,根據需求您還可以再option檔案中選擇M與L尺寸.&nbsp;我上學時一直很喜歡玩原子筆的按鍵.那種使用感覺讓人停不下來!! 直到有人告訴你你太吵了哈哈哈.&nbsp;我研究了一下原子筆的結構並把它做成小巧的按鈕.組裝部分只需要由左至右,依序地1.本體 2.按鈕 3.內部結構 4.彈簧 5.底板 的順序進行組裝即可.建議在第三個內部結構上塗抹一些3D列印機潤滑油脂.底板用力按壓後逆時針旋轉即可上鎖.&nbsp;我使用的是uxcell的直徑6mm,高15mm的彈簧.(S size) 設計上有多餘的空間,只要高度滿足15mm即可.&nbsp;另外我還準備了許多不同版本的文字與圖案,你可以在option檔案中選取喜歡的.趕快跟著我一起來按這個按鈕吧!

Clicky Button

porte-clés

***Christmas and Halloween Cases are identical - Just add your new scenes*** Light up different Christmas scenes in this display. An LED tea light candle is required. &nbsp;The display features a door that opens to allow access to the tea light. Use a section of 1.75mm filament inside the hinge to connect the door to the case. Depending on your printer/setup, this hole may be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.&nbsp;I have included a separate liner. This allows you to print the case in a dark color, but line the inside with a lighter color to allow for more reflection of light outward, making everything brighter.&nbsp;For a complete display, you will need:<ul><li>1x Case</li><li>1x Door</li><li>1x Knob</li><li>1x Snap Ring</li><li>1x Liner - Optional</li><li>1x (minimum) Scene - You can easily remove the snap ring to swap out scenes as desired</li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;<h4>Print Settings</h4>No special setting are needed for the display case, door, knob, snap ring and liner. &nbsp;Scenes Print SettingsPrint the scenes with 100% infill. The scenes also require color changes:<ul><li>The bottom 3 layers <ul><li>white or clear</li></ul></li><li>The top 2 layers <ul><li>should be black for most scenes</li><li>Blue works well for the snowflake</li><li>If you have an MMU/AMS, other colors can be added as well</li></ul></li></ul>&nbsp;<h4>Assembly</h4>Glue the knob into the door. Only a very small amount is needed.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/c2ff42e5-4f47-41e8-8905-382ea68f6cfe.webp"></figure>Put the door in place and latch it. Use a 20mm piece of 1.75mm filament to connect the 3 sections of the hinge. If the filament goes in very easily, it may be a good idea to heat up the top end of the filament ‘pin’ and press it flat. This will prevent the pin from falling through later on.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/230e3f93-7a69-4e0a-8026-060800c5ea3a.webp"></figure>Open the door. Insert a scene into the opening (image facing outward). Insert the snap ring behind the scene by gently squeezing and placing it into the groove (see red arrow below).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/164034e6-1484-4bc7-a435-e0a956565206.webp"></figure>If you are using a liner, slide it inside the case. This may be a tight fit. Go slowly and be sure to slide it in evenly on all sides.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/96f9e1cf-982a-4e8f-be08-881a51506e3b.webp"></figure>Turn on your tea light and close the door.&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Display Cases<ul><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Dark Green PLA</li><li>Bambu Lab Matte Dark Red PLA</li><li>Bambu Lab Silk Gold PLA</li></ul>Liners<ul><li>Bambu Lab Matte Ivory White PLA</li><li>Bambu Lab Basic Bambu Green PLA</li></ul>Scenes<ul><li>Bambu Lab Matte Ivory White PLA</li><li>GIANTARM Transparent Clear PLA</li><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Mandarin Orange PLA</li><li>Bambu Lab Matte Lemon Yellow PLA</li><li>Bambu Lab Matte Marine Blue PLA</li></ul>

Christmas Tea Light Display

Noël

Kardes.Design

Update: More panels added found in this <a target="_blank" href="https://makerworld.com/en/u/2706903410/collections/58849" rel="nofollow noopener">collection</a>&nbsp;&nbsp;Behold, The Lantern of the Damned, the customizable lamp that&#39;s the perfect addition to any Halloween decor! With its interchangeable panels, you can turn it into a wicked witch, a cackling skeleton, or any other creepy character that suits your fancy. And with its compatibility with Bambu Lab&#39;s LED lamp kit or a generic LED strip, you can set the mood with just the right amount of eerie illumination.&nbsp;&nbsp;<ul><li>Endless Possibilities: Choose from a wide selection of eerie panels to customize your spooky lamp.</li><li>Effortless Printing: No support material needed for printing, making it a hassle-free experience.</li><li>Works seamlessly with <a target="_blank" href="https://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab&#39;s LED lamp kit</a> and a generic LED strip.</li><li>Assembly Made Easy: Snap together with ease - no glue or extra hardware required.</li><li>No AMS required. Simply print 2 layers in white and swap filament once.</li><li>Everything is printable on all Bambu lab printers including the A1 mini</li><li>Fully compatible with my <a target="_blank" href="https://makerworld.com/en/u/2706903410/collections/57878" rel="nofollow noopener">mystic lamp panels collection</a>. Panel templates are available to remix</li><li>Request panels down in the comments and I will try my best to make them.</li></ul>Print instructions:Recommended filaments:Body: <a target="_blank" href="https://shrsl.com/4k36h" rel="nofollow noopener">Bambu Lab Onyx Black Sparkle</a>Panels: <a target="_blank" href="https://shrsl.com/4k36a" rel="nofollow noopener">Matte Ivory White</a> and <a target="_blank" href="https://shrsl.com/4k35q" rel="nofollow noopener">Matte charcoal</a>Sparkle blackMain structure:Designed to be 100% support free.Layer height: 0.2Infill: 5%Bottom/top layers: 4Walls: 2&nbsp;Panels:Print directly with from the print profile if its available for the model that you desire.Orfirst layer:0.2remaining layers height: 0.1Print 2 layers in white ( or another a light color) and simply pause and swap to black ( or automatically with the AMS 3mf files included)<figure class="table" style="width: 46.27%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000048924/design/2023-10-28_67e43c17681ac.png"></figure></td><td><figure class="image image_resized" style="width: 83.98%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000048924/design/2023-10-28_589d9fd280c1b.png"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;LED Strip:&nbsp;Print the LED channel if you don&#39;t have the Bambu lab LED kit.&nbsp;The channel can fit around a 2 meters. you do not need to cut the strip if its longer. instructions below.&nbsp;<figure class="table" style="width: 36.41%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><a target="_blank" href="https://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab LED lamp kit</a></td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000048924/design/2023-10-24_b7be18bbf892a.png"></figure></td></tr><tr><td>Generic LED strip( 2meters)</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000048924/design/2023-10-24_572427393436.gif"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Hi, I&#39;m a student and love creating functional and beautiful designs optimized for 3D printing.if you like my work consider supporting me with these options:<ul><li><a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=6VL4LD2NAJJ86" rel="nofollow noopener">Paypal</a></li><li><a target="_blank" href="https://www.buymeacoffee.com/KardesDesign" rel="nofollow noopener">Buymeacoffee</a></li></ul>

The Lantern of the Damned LED Lamp Kit 001

Halloween

Romwba3D

A Cute Rocker Gnome / Gonk split for multi-colour printing, also split to enable printing with just one AMS or all in one with more than one AMS.&nbsp;I have Just Released a Christmas version of this model also :- <a target="_blank" href="https://makerworld.com/en/models/67297#profileId-71190" rel="nofollow noopener">https://makerworld.com/en/models/67297#profileId-71190</a>&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded 3mf Print profiles for both the X1C/P1P and A1 Mini &nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;I have lots of Gnome / Gonks available on the patreon&nbsp;You can view all the Available Models - now over 200 on https://www.romwba3d.com

Rocker Gnome

gnomes

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_d8isth83q5cb.png" alt="NK"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_jeh5ijkl8akh.png" alt="banner"></figure> I'm currently playing death stranding on my PC and came up with the idea of recreating the „Odradek“ scanner as a desk light so I'd like to present you the "Desk Stranding" lamp (thanks to reddit user u/Typh_R who came up with the name). This is one of my biggest projects so far with a total of 37 parts needed (30 individual parts). I only used screenshots to recreate the original look as close as possible with keeping the printability in mind. I ended up with 4 different .3mf's, divided into their color style. All parts won't require any supports and you also won't need an MMU for this project, all color changes are layer based. There is a bit of assembly required, you'll find everything that's needed below!You can also use this as a cosplay prop if you are using batteries or a powerbank as the power source, there is still some space inside the main body for small power sources. All parts are labeled with a version number so you can easily detect any future changes! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_rb1gk5guxth2.png" alt="Manual"></figure> &nbsp;Note: Two lights are flipped in some pictures, the final version has got the correct original look!<h3> </h3>&nbsp; Features:<ul><li>Fully FDM compatible with no supports needed</li><li>On/off switch</li><li>Invisible wiring (wire channels through the hinges)</li><li>All lights are fully adjustable</li></ul> Hardware needed:<ul><li>0.25mm² wires (About 2 meters red and black)</li><li>Switch (21x15mm [punch hole is 13x20], standard size, like <a target="_blank" href="https://www.aliexpress.com/item/32921026422.html?spm=a2g0o.productlist.0.0.1c5313ce9bHl4M&algo_pvid=6a672913-6609-4980-9225-2778fcda0396&algo_expid=6a672913-6609-4980-9225-2778fcda0396-35&btsid=f061563d-0e5d-4e64-9179-2874cbf4c177&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb201603_55" rel="nofollow noopener">this</a>)</li><li>Soldering tools</li><li>LED Strips</li><li>1x LED Diode Blue</li><li>Power Source</li><li>10x M3x4 Screw</li><li>15x M3x12 Screw</li><li>5x M3x20 Screw</li><li>21x M3 Nut</li><li>5x M4x20 Screw</li><li>5x M4 Nut</li></ul> Installation guide: <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_1zgcvcaj35py.jpg" alt="Qries"></figure>Click <a target="_blank" href="https://drive.google.com/file/d/1xE0kxJmfiwEKIVhW-_Ozk4rUgfkIppxT/view?usp=sharing" rel="nofollow noopener">here</a> for a detailed instruction manual (pdf file). This design is still subject to change so check back again for updates (I already made some changes after taking the pictures so they might differ from the printed version).Have fun with the lamp! As bonus, here is a little stop motion animation from the lamp in action:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_sl2qsjg41wfo.gif" alt="Buddy"></figure> +++++++++++++++++++++++++++++++++++++++++++++++++ &nbsp;If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs! Happy printing!&nbsp; <figure class="image image_resized" style="width:7.73%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_y0rwyb5nz7o3.png" alt="NK"></figure><h3>Print instructions</h3><ul><li>All parts are optimized for FDM printing.</li><li>Please use a 0.4mm nozzle (or smaller).</li><li>I advise to use the .3mf (or gcode) files, as all parts are already aligned and ready to print. However, I’ve provided all .stl files as well!</li><li>Print in PETG for better durability</li></ul>&nbsp;&nbsp;This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.

Desk Stranding - The Death Stranding Desk Lamp

Lampes

Teixi3D

I bring you a painted style Super Mario model, created with HueForge. I hope you like it!!&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Pastel Watermelon Transmission Distance: 1.5 PLA PolyLite Pro Light Blue Transmission Distance: 1 PLA Protopasta White Transmission Distance: 3Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to Pastel Watermelon At layer #15 (1.28mm) swap to Light Blue At layer #22 (1.84mm) swap to White for the rest.

escape

cadenas

hugo

gift card

pencil box

shoes

under desk

sword

bed plate holder

chats

voyages

toupies

motors

Tissues Box

Toolbox

carabiner

gadget

fidget

keychain

One piece

bureau

Lightbox

spool

Pixel Art

supports de casque

Switch

battery

Dryer

masques

Arduino

etoiles

Abeilles

déco

tests

cuisine

wall art

masques

Jeux

tiroirs

3d scanner

Coaster

porte-clés

Noël

Halloween

gnomes

Lampes

Hueforge