Stag 3D

<h2>Chinese Dragon Lantern / 中国龙灯笼</h2>A modern traditional Chinese dragon lantern that&#39;s easy to print and assemble and will look great around the home. Great print for Chinese New Year, the year of the Dragon. &nbsp;Once printed and assembled simply place an LED tea light onto the base plate and fit the frame over the top.<ul><li>Slide both the diffuser and dragon style panels into the rails on each side of the frame.</li><li>The frame decorations are optional but can be blued onto the frame as pictured below should you choose to use them.</li><li>The lid can be pushed into place and will remain in place, however can be glued if preferred.</li><li>No supports are required for this model.</li><li>Plate glue recommended to ensure good adhesion.</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/834769/2024-01-10_27d6fc05174d9.png">&nbsp;现代传统中国灯笼，易于打印和组装，在家中看起来很棒。 打印和组装后，只需将 LED 茶灯放在底板上，然后将框架安装在顶部即可。&nbsp;<ul><li>将扩散器和龙式面板滑入框架两侧的导轨中</li><li>框架装饰是可选的，但如果您选择使用它们，可以在框架上涂上蓝色，如下图所示</li><li>盖子可以推入到位并保持在原位，但如果愿意，可以粘上</li><li>此模型不需要支撑</li><li>建议使用板胶，以确保良好的附着力</li></ul>&nbsp;

Lou prints