max.mustermann.mails

Vixvvo 3D

commercial licenses will be accessible through my Patreon page, 'Vixvvo3D', at the affordable rate of $6 per month. I aim to consistently post and model new content on a weekly basis. Your support on <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a> is greatly appreciated!&nbsp;This is a V2 version of the previous one I've made, this look is way over modern and smooth finish! “I've created a desk drawer design before, and it received a lot of positive feedback. Building on that success, I've crafted a new version that features three separate drawers for organization! Attach it with double-sided tape or opt for drilling holes for a more permanent fixture. I'm open to hearing your ideas, so feel free to share them in the comments!” <ul><li>Took this idea from <a target="_blank" href="https://www.printables.com/@godsci" rel="nofollow noopener">Godard Scientific</a>.</li><li>Around 500g of filament</li><li>12 Hour of print time</li><li>needs <a target="_blank" href="https://www.amazon.ca/uxcell-Screws-Phillips-Carbon-Tapping/dp/B09B385SFS/ref=sr_1_8?dib=eyJ2IjoiMSJ9.3XW9GKS24tRc1l0zzCYIaDV_JpwTjt1yyVTipehZhP_09z7Kqgsl4oFVeEVEHPo4FCwFetbodOyEBIQIJwt2k9aJRGSwSKCYmFiBS4IpznPE5CCs6on0nJUxpOMH_GJSkh5q3agzswdsSxrtf3oyMsTVDX3dV9Tgz0x-hfpoO_IpjMS8Uoomz9uCN1muf3RiZqNcjGYMd8Hi4ZCI5sQz-IODglrSst2MInJAshQ88QCc99hJqN2X6ZCLBld0p8HNnfJp8Of8ATmcldB1l-79JkGAQFM-6mYJH74tGxEnRXg.OBCFM2l7fP2IISSKCx1KfzWYzsLorDqZ5ts2zwnfyks&dib_tag=se&hvadid=684854298656&hvdev=c&hvlocphy=9000121&hvnetw=g&hvqmt=e&hvrand=15885152324473862792&hvtargid=kwd-317894824318&hydadcr=11265_13489654&keywords=18mm%2Bscrews&qid=1708800713&sr=8-8&th=1" rel="nofollow noopener">M3 x 18mm</a> Screws</li></ul>&nbsp;&nbsp;

Under-Desk Drawer V2

Schubladen

BotanyChic

Vase in a modern style for everyoneNo supports needed. Easy print. Can be scaled up or down however you like.Check my other creation here: <a target="_blank" href="https://makerworld.com/en/models/512487#profileId-428546" rel="nofollow noopener">The Slim Drop - A Botany Chic Creation by BotanyChic - MakerWorld</a>&nbsp;If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃

The Water Drop - A Botany Chic Creation

Vasen

Canadian Gamer

Bookmarks - Fairy Set #1&nbsp;You can find my other bookmark designs here:<a target="_blank" href="https://makerworld.com/@CanadianGamer/collections/1424555" rel="nofollow noopener">https://makerworld.com/@CanadianGamer/collections/1424555</a>&nbsp;---------------------------- A Commercial license to sell printed copies is available on my Patreon:<a target="_blank" href="https://www.patreon.com/CanadianGamer3DPrintsEDM" rel="nofollow noopener">https://www.patreon.com/CanadianGamer3DPrintsEDM</a>As part of your membership you will also have access to exclusive files available only on Patreon.----------------------------&nbsp;Printing Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA BambuLab Basic Black PLA Bambu Labs Magenta PLA Bambu Basic Purple PLA BambuLab Matte Ivory White Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Magenta At layer #10 (0.88mm) swap to Purple At layer #13 (1.12mm) swap to Ivory White for the rest.

Bookmarks - Fairy Set #1

Bilder

RTX_Nitrox

<h3>Description</h3>NEW Design SLIDE AND BODY!!!!!&nbsp;Immerse yourself in the world of tactical operations with our meticulously crafted 3D-printed Glock 19 replica, complete with a silencer for added realism. Designed for enthusiasts and collectors&nbsp;Authentic Design: Our Glock 19 replica faithfully reproduces the iconic design and intricate features of the original firearm, ensuring a visually stunning and true-to-life replica.Interchangeable Magazine: Enjoy added versatility with a removable magazine that allows you to simulate reloading, providing a dynamic training experience or adding authenticity to your display.Moving Trigger: Enhance your immersion with a movable trigger, offering a tactile sensation and adding realism to your handling of the replica.

Glock 19 v9 new Slide 

Pistolen u.ä.

daclasen

This is a Skadis Holder for various Wera Screwdrivers/Bitholders. It is mounted to the Skadis Board with the famous <a href="https://www.thingiverse.com/thing:2853261" rel="nofollow">Universal Hook</a> from <a href="https://www.thingiverse.com/csd_salzburg/designs" rel="nofollow">CSD_Salzburg</a>. You can mount e.g. the following Drivers from the Kraftform Kompakt Series but others might fit as well:<ul><li><a href="https://products.wera.de/en/kraftform_kompakt_kraftform_kompakt_with_ratchet_function_fine_tooth_system_for_precision_work.html" rel="nofollow">Kraftform Kompakt Ratcheting Screwdrivers</a> like the 825 RA, 27 RA, 816 RA, 80 RA</li><li><a href="https://products.wera.de/en/torque_tools_series_7400_kraftform_torque_screwdrivers_variable_torque_adjustment_models_7445_46_47.html" rel="nofollow">Kraftform Kompakt torque screwdriver</a> 7445, 7446, 7447</li><li><a href="https://products.wera.de/en/kraftform_kompakt_bitholding_screwdrivers_and_adaptors_811_1_stubby.html" rel="nofollow">Kraftform Kompakt Stubby Bitholding screwdriver</a> 811/1 and also all other Stubby Screwdrivers with the same mating interface <a href="https://www-de.wera.de/dw2017/de/stubby" rel="nofollow">like those</a> ;)</li></ul>&nbsp;Step File is also included in case you wanna remix your own custom holder with different mounts :)

Skadis Holder for various Wera Screwdriver/Bitholder

Mixed

jbogusz

This is a deck box for Pokemon cards. It holds about 2 full decks. The top snaps on. This is quick and easy to print. It is printed in 4 parts across 3 plates of White, Red and Black. The bottom and button in white, the top in red and the ring in black. The ring is glued into the bottom white piece. The button is glued to the black ring after the ring glue sets and with the red top put on and closed. Center the button in the space and glue it. Load with cards and battle on!

Pokemon Deck Box

Pokemon

midego

Copy/pasted the description from the original author:&nbsp;"I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible solution: with this adapter you can mount the board on several points if you want more strength or rigidity, and you can choose at what distance you want the board from the wall by adding a spacer.The diameter of the hole for the screw is 5 mm, limited by the width of the holes in the SKÅDIS board. This is therefore also the maximum diameter for the screw you can use."&nbsp;I printed with 100% infill, to make sure that the screw could not compress the piece.&nbsp;10mm set:&nbsp;Layers: 50 Model size: 79.75mm × 128.75mm × 10.00mm Used filament: 3.39 gram Filament: 1.08m / 2.60cm³ Filament cost: €0,08 per set (based on €25,- per 1kg of filament) Estimated print time: 00:20:46 (hh:mm:ss)&nbsp;20mm set:&nbsp;Layers: 100 Model size: 79.75mm × 128.75mm × 20.00mm Used filament: 5.35 gram Filament: 1.71m / 4.10cm³ Filament cost: €0,13 per set (based on €25,- per 1kg of filament) Estimated print time: 00:32:38 (hh:mm:ss)&nbsp;I will try to monitor the comments, if you want any other size, just leave a comment and I will make it for you.

Ikea Skadis Wall Mount / Fixture / Spacer / Screw adapter

Skadis

This is a Skadis Holder for the <a href="https://www-de.wera.de/en/great-tools/kraftform-micro-series/" rel="nofollow">Wera Kraftform Micro</a> Screwdriver with 6 Slots. It is mounted to the Skadis Board with the famous <a href="https://www.thingiverse.com/thing:2853261" rel="nofollow">Universal Hook</a> from <a href="https://www.thingiverse.com/csd_salzburg/designs" rel="nofollow">CSD_Salzburg</a> (you need to print 2 Hooks).As shown in the Pictures the Holders can be stacked horizontally against each other to allow you to really pack your Skadis… wonder who would do that :DI also included the rather complex geometry as a Template (also as .step file) in case you want to remix your own holder :)

Skadis Holder for Wera Kraftform Micro Screwdriver

Tools

Pulsar Designs

This interesting-looking 4-in-1 plant pot lets you have a larger central plant surrounded by three smaller offshoots. Great for succulents and more! Use the “fuzzy skin” setting in your slicer for a rougher, robust look or print it as-is.

4-in-1 Plant and Succulent Pot

Pflanzen

marciealana

I couldn't find any Gridfinity bins that allowed storing a sufficient number of hex bits. This stores 127 6mm bits. The slots are oversized to allow easy insertion/removal, and the base uses Gridfinity Refined's updated base, allowing 6x2mm magnets to be inserted without glue.

Hex bit Gridfinity Refined

Gridfinity

Marvel 3D

A simple threaded pot you can use as a pen pot or storage for other smaller items and keep them safe with the lid T

Threaded Container

Dosen, Kontainer, Boxen

OVERTURE Filament

This lil' guy can be printed as separate pieces (support free) or as a single body 👻🎃 Paint in your slicer, or paint with acrylics!&nbsp;Printed in Orange, White, Black and Green <a target="_blank" href="https://www.amazon.com/OVERTURE-Filament-Cardboard-Dimensional-Accuracy/dp/B0991ZKTWM?th=1" rel="nofollow noopener">Overture Matte PLA</a>&nbsp;Happy Printing!Overture

Ghost Pumpkin 

Halloween

Adam L

Update(8/6/23): Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm. This has steeper overhangs, recommend you print at a lower layer height with wider outer walls, which should help the print work. Added a picture of the model to the photo gallery.Update(6/27/23): Minor revision to the design, added a couple missing fillets to the top of the snout. No need to reprint, but if you are printing again, might want to grab this version.Update(5/3/23): I now recommend trying this one first over the parent mod, as I think it may be more generally superior with more upsides than downsides. It seems like it's been functioning well for a bit.My <a href="https://www.printables.com/model/338542-x1-p1p-ptfe-tube-guide-to-fix-loading-issues-best-" rel="nofollow">original PTFE Tube guide fix for the Bambu Labs X1/X1C/P1P series here</a> has been more successful than I could have imagined, and I'm glad it's helped a lot of people!In this remix, I'm presenting a shortened alternative that may be desirable for some people for a variety of reasons. Provided in 3MF and STEP format in a single design that is compatible with both X1 and P1P. Shown printed at 0.16 mm height with 3 walls in cloudy white PETG. There are some pros and cons relative to the original design, which should help you decide which is for you:Pros<ul><li>Quicker print/less filament (~2.8 g vs 4.5g)</li><li>Harder to destroy, more reinforced</li><li>May work better in certain scenarios where the filament is very stiff. I found the original model's curve restrictions kept forcing a very-stiff filament like eSUN’s ePAHT-CF to break, and I could not use it with the original design. With this design, I can print even this extremely stiff material! <a href="https://www.printables.com/model/457284-panylon-tuned-x1c-print-profiles-for-bambuorca-sli" rel="nofollow">You can find my tuned profile for that here</a>.</li><li>Cuter looking, protrudes less.</li><li>Probably slightly less finicky to print… less reliant on long overhangs. I would still use a brim, however.</li></ul>Cons<ul><li>Doesn't prevent the PTFE from hitting the glass as much as the other model.</li><li>Requires decent short-bridging performance in your print (I had no problems in PETG, as shown).</li></ul>&nbsp;Printing instructions here are the same as the parent file from which this is remixed . Please see that link for details .

ShortStack: The Tiny Little Bambu AMS loading fix that might save your sanity!

Bambu

wuguigui

this is a flower pot based on the real plant: “Cosmos bipinnatus Cav.” You can put small items inside it, like paper clips and thumbnails...The soil and pot models can change with each other, also you need to cut a piece of filament as the stem.&nbsp;No supports are needed when printing, but the petals model needs 2-3 layers of a raft to make it steady on the hotbed. If some petals have flaws, you can print the "Flower-Petal-Single" model to replace it, this part also needs a raft when printing.&nbsp;The "Flower-Stamen" part recommends printing height at"0.1mm", others"0.2mm". I use a Bambu Lab P1P to print all the parts with fast speed and high quality.&nbsp;There is a flower pots family at: <a target="_blank" href="https://www.myminifactory.com/object/3d-print-325400" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-325400</a> <a target="_blank" href="https://www.cgtrader.com/profile/models/4542826/" rel="nofollow noopener">https://www.cgtrader.com/profile/models/4542826/</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/24265/2023-09-21_703ded94a6e0f.png"></figure>&nbsp;Thanks.