mavecruise

garrett1966

This adapter lets you replace the factory speakers which are in a weird housing with standard 6.5" speakers.&nbsp;This should be printed in ASA, ABS, or possibly PETG. PLA would not last long.&nbsp;If you appreciate my work and want to support me, you can <a target="_blank" href="https://www.buymeacoffee.com/garrett1966" rel="nofollow noopener">buy me a coffee</a>.

BMW X5 E53 front door 6.5" speaker adapters

Bearrr

Be sure to check out all the other hueforge car prints I have on my profile!&nbsp;BMW E30 Wide Body Side View, created with Hueforge.Photo printed with:0-15: Bambulabs Black16-18: Bambulabs Matte Ash Grey19-25: Bambulabs Jade White&nbsp;I don&#39;t have an AMS so I changed the filament color changes to pauses at layer 16 and 19, for my two filament swaps and it printed fine with no tower.

BMW E30 Wide Body Side View (Hueforge)

toys

MTobes

This is a simple paint brush or pen or whatever-will-fit holder. It measures 80 x 80 x 160 and has 22 10mm holes and 4 20mm holes for holding anything you need to stand upright.&nbsp;You can use whatever print settings you prefer, but I would suggest a standard .4mm nozzle size, .2mm layer height, three walls on all sides, and 15% cubic or gyroid infill. On a P1P at the standard speed it should take approximately 4 hours to print.

Brush or Pen Holder

tools

RoyalT

Panels to cover the cable channels running along the top left and right edges of the Bambu Labs P1S 2023 models. The other cable covers I found seem to be made for an older version of the P1S or P1P as they did not fit my machine correctly. These panels are compatible with the latest edition of the P1S (End of 2023).&nbsp;I have uploaded two print profiles. The first includes both left and right cable channel cover panels on one plate. The second has the left and right panels each on one plate. You can always Download the STL to print however you prefer as well.&nbsp;<h3>Recommended print settings (100% scale, 0.4mm nozzle)</h3><figure class="table" style="width:450px;"><table style="border:1px double rgb(192, 192, 192);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Material</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">ABS, ASA, or PETG</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Infill</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">10% Support Cubic</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Elephant foot compensation</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">0.15 mm</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Supports</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">None</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Brim</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">None</td></tr></tbody></table></figure>Make sure you use a filament that can withstand 60c temps. PLA will be a no-go if you print materials like ABS that require high chamber temps. The chamber temps regularly reach 60c+, when the build plate is set to 90-100c with the door closed, at the top of the case where the panels sit. ABS and ASA would be good choices for this print. You could probably get away with PETG or PETG-CF too if you don't do much high-temperature printing.&nbsp;This is my first public release so any critiques or suggestions are more than welcome!&nbsp;I ❤️ My Bambu