mauricewoelk

TotoCutugno

The front panel with DB15 connector slot for controller.We love neo-neo, so consolize your MVS.

MV1FZ / MV1A front panel

Konsolen

a wltoys conversion kit for the 1/24 series, it makes the car wider and gives it more ground clearance. i only did it on the front for the pictures so its better to see.

wltoys 1/28 offroad conversion kit for k989 or 969

RC Spielzeug

Marc Elbichon

➡️ Checkout the entire <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/477489" rel="nofollow noopener">Ikea Skadis Collection</a> !&nbsp;I love Ikea Skadis system, but I needed a stronger version to hold some heavy stuff. I made a heavy duty version!&nbsp;Comes in single print or separate as regular panel + spacer (Can be usefull if you already have some panels printed, otherwise go with the single print version)&nbsp;Skadis has to measure a multiple of 40mm, so the X1/P1/A1 can print the 200x240 version, or the 240x240 if you follow <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">this guide</a> to use the entire bed (without AMS only) .&nbsp;I provided a print profile for the 200x240, and I uploaded stl file from 160x160 (should fit in the mini bed) to 400x400, if you have a bigger printer.&nbsp;Note : They are made to be side by side mountable, I mean, you can use any Skadis accessories sitting on two panels at the same time&nbsp;&nbsp;&nbsp;

Heavy Duty Ikea Skadis Panels (Regular included)

Haushalt

dakjones82

If you're a cat person then you get it! Add some character to your holiday decorations this year.

Kitty Cat Christmas HoHoNo

Weihnachten

Scattered Collectables

Ornamental Pokeball modelSimple print, supports not necessary but can help bridging. Glue the parts together or leave the top unglued so you can open it and put something insideThe outer ring is optional, the part just slides over and can be held on with glue&nbsp;Join my patreon for the right to sell physical prints https://www.patreon.com/ScatteredCollectables

Ornamental Pokeball

Spielzeug

Black Glovz

Halloween Lamp&nbsp;Even if it's looks a little complicated. Very easy to assemble. See third picture.&nbsp;All parts snap together tight, no need for glue. &nbsp;For printing use Clasic mode, not Arachne. I used Generic PLA profile, no calibration and they fit together.Can hold any size LED light&nbsp;

Halloween Handheld Lamp LED Lightbox

Halloween

litho

Rick269

EDIT: This will not fit on an X1(C), as the lidar sensor is directly behind the hotend fan.This is my attempt to help minimise nozzle clogging in my P1P, which seems to be a fairly common issue with Bambu Lab printers. One of the theories is that heat from the bed/model is being drawn up into the (relatively small) hotend cooling fan, which reduces its efficiency and ability to cool, especially when dealing with high bed temperatures. This simple cover should help with this.It is held on with the two screws which hold the hotend fan on. The easiest way to fit it is to unload the filament, remove the two screws which hold the hotend assembly in, and pull it down so you have enough room to unscrew the fan screws. Fit the "insulator" piece and then do up the fan screws. I printed in PETG-CF but you can print it in whatever filament you like, except PLA (it's likely to melt)If you give this a try, please leave a comment on whether you find it useful or not. I do not believe that this piece can cause any harm, so it's worth a try.