maureen.nemetski

porkc22

Celebrate the 4th of July with Disney! This model is perfect for Disney Cruise door decorations and decor. I would consider trying to print on a clean bed for the best results and as always watch the first layer. This was printed with a single AMS with: Duramic Black Duramic RedDuramic White Hatchbox True Blue&nbsp;This model has a pause at 3.5mm to add a 6x3 magnet, you can drop the magnet in and then hit start print and it will cover the magnet up and be hidden! Here is the link to the magnets I used for this design : https://www.amazon.com/gp/product/B077K364Z7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1

Red White and Blue Mickey 

July 4th

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

shoes

DatumCAD

2in1 and fully 3D Printable Sliding Bevel &amp; Angle Gauge&nbsp;<figure class="image image_resized image-style-side" style="width: 47.72%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466252/design/2024-05-22_16b7f7fa56086.gif"></figure>A Sliding Bevel (also known as a bevel gauge or false square) is an adjustable gauge for setting and transferring angles. Different from a square, which is fixed and can only set a 90° angle, the sliding bevel can set any angle and transfer it on another piece.&nbsp;This is just as functional as a non-printed version, but in addition, has angle markings built into the handle side faces. These run in 15deg major increments, with some smaller markings at 5°…..hence it is possible to gauge, or just quick reference, some of the most commonly used angles. One side of the handle shows an angle range of 0-90° while the other side shows 90-180°.&nbsp;All items print with zero support, and no need for metal fasteners as the knurled thumb screws are all printed too. Makes for very satisfying assembly and use.&nbsp;Choose ‘Multicolour’ print profile for smooth handle faces complete with flush Text in contrasting colour….or Choose ‘Singlecolour’ print profile for all items on a single build plate &amp; with recessed Text.  &nbsp;Will fit any BambuLab printer including the A1 Mini… enjoy :)&nbsp;Assembly: The handle plates index together &amp; sandwich the sliding blade. All are secured with use of the two captivated taper nuts, one short bolt (that can be done up using a screwdriver or similar) and one threaded knob for adjustment &amp; clamping of the gauge blade at the desired location. See animated GIF (in images) &amp; exploded assembly BOM below.<figure class="image image_resized" style="width: 69.98%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466252/design/2024-05-17_43e62e8d97b2a.png"></figure>

2in1 Sliding Bevel & Angle Gauge

Tools

Hajimi

Carnation 康乃馨

flowers

Mimi home decoration

You will need your 0,2 noozle to print this 2 pendant . you can use them for necklace or ear rings.great gift for mothers day or teacher .I used silk gold , silk silver , matt red and basic white filament .&nbsp;<a target="_blank" href="https://makerworld.com/en/@Mimihomedecorat" rel="nofollow noopener">https://makerworld.com/en/@Mimihomedecorat</a>&nbsp;

hearts jewel pendant

Jewelry

MadMax3D

The Bambu CMYK LED Backlight Board keeps selling out before I can order it, so I made an alternative. <a target="_blank" href="https://www.amazon.com/dp/B09GKBWMTC?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">These</a> pair of photo booth lights have a similar light board and come with the USB cable and on/off/intensity switch for about the same price as two Bambu backlights. As a bonus, you get two little tripods in the light kit. I designed a frame that displays 144x108mm lithophanes (same size as Bambu). The frame can be oriented horizontally or vertically simply by turning it on end.&nbsp;Feb 1, 2024 - As suggested by a user, I have added a profile with two diffuser options to use with the backlight frame. See pictures in the diffuser profile. STL's added to the raw download section.&nbsp;Printing InstructionsNo supports required. Print in PLA or PETG, .2mm layer height, 5% infill. My profile has the frame, two straps, 4 feet and a white shroud for the inside of the frame. STL's located in the raw download section.&nbsp;Assembly InstructionsItems requiredFrame x1Straps x2Feet x3M3x8mm hex screws X4&nbsp;<figure class="image image_resized image-style-side" style="width:35.74%;"><a href="https://www.amazon.com/dp/B09GKBWMTC?psc=1&ref=ppx_yo2ov_dt_b_product_details" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/482006/2024-01-28_580cf88bd00828.jpg"></a></figure>&nbsp;&nbsp;&nbsp;&nbsp;Photo booth lights from Amazon or other source. <a target="_blank" href="https://www.amazon.com/dp/B09GKBWMTC?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">These</a> work well, as may others of similar size.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-side" style="width:35.73%;"><img src="https://makerworld.bblmw.com/makerworld/draft/482006/2024-01-28_4e932b36f6ee8.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Align the light on the back of the frame and secure it with the two straps and 4 screws.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-side" style="width:35.42%;"><img src="https://makerworld.bblmw.com/makerworld/draft/482006/2024-01-29_3197176fd5ee9.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Add three feet to the back of the frame using the 5mm guide pin. If you only ever display the lithos in landscape mode, you only need two feet along the horizontal edge. Secure the feet with a drop of CA glue.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-side" style="width:25.85%;"><img src="https://makerworld.bblmw.com/makerworld/draft/482006/2024-01-28_a73634285c3368.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Plug it in and enjoy while you wait for the Bambu backlights to come back in stock!&nbsp;&nbsp;<figure class="image image_resized image-style-side" style="width:25.98%;"><img src="https://makerworld.bblmw.com/makerworld/draft/482006/2024-01-28_a8cacc7321fb28.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-side" style="width:26.12%;"><img src="https://makerworld.bblmw.com/makerworld/draft/482006/2024-01-28_76c5f54658dab.jpg"></figure>&nbsp;

Lithophane Backlight Frame

Lithophanes

LabLab

Enjoy you Valentine's Day with this very cute T-Rex! It is printable in place, this mean you don't have to assemble anything. Just download the file and print!&nbsp;Perfect gift for any significant person in your life! It will remind everybody how much you love them.&nbsp;There are also an <a target="_blank" href="https://makerworld.com/en/models/247765#profileId-263987" rel="nofollow noopener">Easter Bunny version</a> and a <a target="_blank" href="https://makerworld.com/en/models/398197#profileId-299703" rel="nofollow noopener">Floreal Spring version</a> of this model! Please check them out!&nbsp;Check out my profile for more Valentine's work!&nbsp;Clean your buildplate properly before printing.&nbsp;For more models, please check out my <a target="_blank" href="https://makerworld.com/en/@LabLab" rel="nofollow noopener">profile</a>!

FlexiDino Print in Place T-Rex for Valentine's Day

Gifts

sduppleganger

A picture of a gold dragon on a pedestal, turned into a 2D art using Hueforge.The gold silk PLA really enhances the feel of this piece, but I faced some stringing when printing at a layer height of 0.08. Maybe you won't have the same issues.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:PLA Artista Black PLA eSun BrownPLA Overture Silk GoldPLA Artista White &nbsp;Swap Instructions:Start with BlackAt layer #5 (0.48mm) swap to BrownAt layer #10 (0.88mm) swap to GoldAt layer #18 (1.52mm) swap to White for the rest.&nbsp;

Gold Dragon - Hueforge

HueForge

DirectStiff

Author of the model: <a target="_blank" href="https://www.thingiverse.com/popsign/designs" rel="nofollow noopener">Popsign</a> Original model on thingiverse: <a target="_blank" href="https://www.thingiverse.com/thing:4142257" rel="nofollow noopener">https://www.thingiverse.com/thing:4142257</a>

Flag of Israel

Israel 

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014265/design/2023-09-19_8d08d601f168.png"></figure>Let&#39;s start a marble race with friends! This marble run features a series of elements including elevator, starting line, randomized dividers, elevated track, large funnel, spiral, and loop section. It allows competition of multiple marbles, with each segment introducing an element of unpredictability. The excitement continues all the way to the end!&nbsp;Recommended filaments: Bambu PLA series, PLA Basic is recomended for more smooth track<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>Hardware Kit: Marble Run Components Kit-003<a target="_blank" href="http://store.bambulab.com/products/marble-run-components-kit-003" rel="nofollow noopener">http://store.bambulab.com/products/marble-run-components-kit-003</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the video tutorial step by step to print and assemble your build. <figure class="media"><div data-oembed-url="https://youtu.be/8_Su9jdzgNA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8_Su9jdzgNA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Marble Run 003

Toys & Games

Lofted Goods

A mid century modern vase.&nbsp;No supports needed. Easy print. Can be scaled up or down however you like.&nbsp;Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: <a target="_blank" href="https://hendricks.design/links/" rel="nofollow noopener">https://hendricks.design/links/ </a>

MCM Vase

Home Decor

V3 Precision

This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for improvement, so feel free to give some feedback either on Printables or on the Youtube videos.This version is 100% 3D printed (not including the mounting screws). Future versions will use bearings and possibly a motor to drive the gears.The images show the assemblies mounted to a 2x6 for testing. The assemblies can be mounted to a similar board or to a base made from aluminum extrusions.&nbsp;Printing RecommendationsI used PLA while developing the spool winder. I would recommend using PETG, or Nylon CF, or other stronger, stiffer filament.The ‘worm’ gear can be tricky to print. In Bambu Lab Studio, I set the part upright and set support to tree (auto) and threshold angle at 10. Set a brim at 8mm.The gears are easy to print and require no support or post processing.The bases need some support and did well with tree (auto) and threshold angle of 30.I used 4 walls and 15% infill on most pieces. The thumbscrews I used 100% infill.&nbsp;AssemblyMost of the assembly is easy and self-explanatory.Note that the rear driven gear is reverse threaded.Specific instructions can be found in an upcoming Instructions Video …….There will also be a link to the video on the V3 Precision website.&nbsp;#best3dp2023<figure class="media"><div data-oembed-url="https://youtu.be/3llHdgb1ftQ?si=rh9tLXTMeOSzBDXe"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/3llHdgb1ftQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/ru2TtLahlmw?si=5opj3V5R-Ab6cPFX"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ru2TtLahlmw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Filament Spool Winder

Printer Parts & Accessories

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-25_28088e30b1c02.jpg"></figure>This 3D-printed mouse has a futuristic hollow shell design, revealing its internal structure. This generative design shell structure is possible only with 3D printing. Our industrial designer fully utilized the advantages of a 3D printed structure to present you with this magnificently artful mouse.&nbsp;Recommended filaments: Bambu PLA series<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>If using PLA matte, metal, silk, please slowly screw in the bolt and avoid over-tightening to prevent structural damage.Print Setting: Print without support, v2.0 print profile recommendedHardware Kit: Wireless Mouse Components Kit-002<a target="_blank" href="http://store.bambulab.com/products/wireless-mouse-components-kit-002" rel="nofollow noopener">http://store.bambulab.com/products/wireless-mouse-components-kit-002</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide or video tutorial below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-15_12b653452832c.png"></figure><figure class="media"><oembed url="https://www.youtube.com/watch?v=lkOg_X4qjW8"></oembed></figure>