matti0010

cyanidesugar

Y'all liked the last Koi filament painting I did, so I tripled it!Bambu Studio users can use the 3MF with all the filament swaps already loaded in. For those of you who don't, or want to set up your own filament swaps and settings, please follow the instructions below!&nbsp;If you need to resize this to a bigger print, PLEASE ONLY CHANGE THE X and Y DIMENSIONS. Altering the Z height will make the layer swaps incorrect. &nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm&nbsp;Filaments Used:<ul><li>PLA Kingroon Black Transmission Distance: 0.4</li><li>PLA Kingroon White Transmission Distance: 8</li><li>PLA BambuLab Tough Vermilion Red Transmission Distance: 3</li><li>PLA BambuLab Basic Jade White Transmission Distance: 5</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #19 (0.92mm) swap to White</li><li>At layer #37 (1.64mm) swap to Vermilion Red</li><li>At layer #44 (1.92mm) swap to Jade White for the rest.</li></ul>_______________________________________If you'd like to support me, I now have a <a target="_blank" href="https://patreon.com/cyanidesugar3dp" rel="nofollow noopener">Patreon</a>! Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more! If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!_______________________________________

More Koi - HueForge Print

hueforge

Jan 3D

Bambu Lab Storage System&nbsp;UPDATE 24.11.2023Now with new LID for Full Hotends here is the LINK:<a target="_blank" href="https://makerworld.com/de/models/72681#profileId-77205" rel="nofollow noopener">https://makerworld.com/de/models/72681#profileId-77205</a>&nbsp;This is a newly developed storage system for all the Bambu Lab printers X1C / P1S, /P1PThe goal was to store all spare parts as well as the glue stick and the Allen key in one box. This was realized as space-saving as possible.&nbsp;The dimensions of the closed box are: 181mmx126mmx32mm&nbsp;The following parts can be accommodated: - Four hotends with all accessories (silicone sock, holders for the thermister as well as the corresponding screws). - Four nozzle wipers + mounting screws - Spare filament cutter - Nozzle cleaner - Glue stick from Bambu Lab - Allen wrench supplied - three times each Lubricant Grease and Thermal Grease&nbsp;The two parts are not joined together, the lid is just put on. &nbsp;Im happy to adapt my design if you want something changed, just contact me and we can work something out.&nbsp;Also look at may other Storage Box:<a target="_blank" href="https://makerworld.com/de/models/47503" rel="nofollow noopener">https://makerworld.com/de/models/47503</a>

Bambu Lab - Tools and Accessories Box

tools

and92rzej

Hello,I made some adapter for rosa3d 350g small spool allows use with AMS. Just print two parts, put together using builded thread and enjoy rosa3d small spool.&nbsp;If you have any issue let me know I will upgrade model.

Rosa 3d adapter 350g to AMS

Bambu

shawn.mek

My son requested some wolverine claws, and since I had just printed a print in place spring box I was like ‘I bet we could make some claws spring loaded!’&nbsp;Famous last words…&nbsp;Fortunately (or unfortunately?) the spring idea proof of concept worked immediately:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-13_5780d7bc20069.gif">&nbsp;So we were off! And then a billion iterations later, we get to this first release version.&nbsp;It's a bit tricky to assemble, but I'll try to get some how to's in the future if needed. Please leave feedback on what I might do to enhance it - or let me know points of failure that I can strengthen.&nbsp;Thanks!&nbsp;For Assembly, you may want to watch this youtube where Uncle Jessy successfully assembles it (<a target="_blank" href="https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou" rel="nofollow noopener">https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou</a>). &nbsp;HAND STRAP - This was for my son, and I actually tried using the Polycam photogrammetry app on my phone to 3D scan his hand, and then made the strap using that :). It worked suprisingly well for HIS hand. I scaled up the strap for bigger hands, but you can also cut or delete a piece to make it bend and fit different sizes.&nbsp;&nbsp;ASSEMBLY&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a7a31b9c9d4a4.jpg">&nbsp;The brake.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_2e8e8b3f94888.jpg">Stick the ‘trigger’ down through the brake sideways and then turn it (somewhat gently, don't break :))<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_034ac41c92e4e.jpg">&nbsp;Put the springs into the brake<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_23fc35f069994.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0a283aa1fd7bc.jpg">&nbsp;TRICKY PART -No to putting the brake on this way (it won't have enough space to release):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_ecf791bfd8bc5.jpg">Put it on the other side (I've never had to glue, but tolerances may necessitate that - the mechanism itself actually holds it together pretty well regardless), and then stretch/pull it over to the front (the springs will now have arm length and springiness for the brake mechanism):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d14067333d86c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1106349f4ddcc.jpg">Now put the claws through while holding the brake out of the way. Depending on tolerances you may need to move the claws in and out of the guides to break it in:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1479d7245892c.jpg">Snap the springs into claws and top plate, and then top plate into bottom plate:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0c259e60d24bd.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a30a3d439e271.jpg">Pull down brake and pull out claws, slip strap around extended claw spring and onto the assembly:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d40f2a0eb72e9.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0233270d2b7b3.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_aebe1855448f5.jpg">&nbsp;&nbsp;

hueforge

tools

Bambu

Toys