matikko

T_WITHE

Welcome! I am pleased to share with you the Gardena quick connector set that I designed in various sizes to perfectly meet different connection needs. The set is available with different threads and sizes:<ul><li>External and internal threads</li><li>Sizes: 3/8&#34;, 1/2&#34;, 3/4&#34;, 1&#34; (M18)</li><li>Traditional BSP thread</li></ul>Material Choice For the best results and long lifespan, I recommend the following materials for printing: PETG, ASA, ABS. PLA can also be used, but I strongly recommend the former materials. Sealing Rings Sealing rings can be printed from TPU material as it is flexible and waterproof. However, for the best results, I recommend using factory sealing rings, especially O-rings, to ensure maximum water tightness and long-term reliability.It&#39;s important to note that high pressure can cause leakage or other issues, so I do not recommend using the connector at high pressure! I experienced slight leakage at 6 bar, so please don&#39;t leave negative feedback because of this. Thank you! For supports, if possible, use support material, or use PETG-PLA or PLA-PETG interface layer mode. Thank you for choosing this 3D printable Gardena quick connector set! I hope you find it useful. If you have any questions, feel free to reach out to me! If you have any suggestions or requests, please contact me. This is a revised version of my original model with some additional sizes: <a target="_blank" href="https://www.thingiverse.com/thing:4904221" rel="nofollow noopener">https://www.thingiverse.com/thing:4904221</a>

Gardena quick connector set

garten

christofer.jh

Experience time in stunning precision with the 3D printed Grand Seiko wall clock.Crafted with meticulous detail and innovative technology, this masterpiece combines the elegance of Grand Seiko design with the futuristic allure of 3D printing.&nbsp;Bring the artistry of timekeeping into your space with this unique fusion of tradition and innovation.&nbsp;Or design your own face with the included .step file.&nbsp;<h3>Now with a bracelet stand!</h3>Make your own length of stand.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458710/design/2024-06-06_7e09f909f11de.jpg"></figure>The pins for the links are octagons, with one type that is twisted to give the option for a “half” tick.The positions I used to make the stand in the picture is as follows:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458710/design/2024-06-07_d56d882a221a.jpg"></figure><ol><li>Normal Link, 1 tick rotated (45 degree)</li><li>Twisted Link, 1.5 tick? (45 degree+22.5 degree = 67.5 degree)</li><li>Normal Link, 0 tick</li><li>Normal Link, 0 tick</li></ol>&nbsp;You need to print with 0.2mm nozzle for the dial! The 0.4mm nozzle looks blurry in real life, the 0.2mm looks sharp.(I failed to print the GS text on 0.4mm nozzle for comparison)&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458710/design/2024-05-14_8ea89705d299c.jpg"></figure>&nbsp;Some glue needed for assembly.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458710/design/2024-05-09_1f28d660bacd7.gif"></figure>

Clock Components Kit 011 - Grand Seiko Watch

iwas

N3KX

LLAMAGHINI Hello. This is the famous LLAMAGHINI badge that I transform to 3D for you to enjoy and laught. I hope you find it cool and “usefull”.

LLAMAGHINI badge

autos

schaniere

griffe

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-18_d6d6c82a9a65a.gif"></figure>&nbsp;The A1 mini Wireless Charger is here! This is an official design model for the <a target="_blank" href="https://store.bambulab.com/products/wireless-charger-kit-012" rel="nofollow noopener">Wireless Charger Kit-K012</a>.&nbsp;Simply power on the charger with a Type-C cable and place your phone on the heatbed. The wireless charging will begin automatically. As it begins, the Z-axis will simulate the printing process by moving up and down for one cycle, and the logo and indicator lights will light up. You can also manually slide the toolhead along the X-axis, and even print a customizable nameplate for the A1 mini Wireless Charger in <a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">MakeMySign</a>.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-14_46c548835236b.jpg"></figure>In order to adapt to the 3D printing processes and filaments, we specially designed 2 Power Modes (high &amp; low) for you to choose to avoid phone overheating and warping of printed parts due to heat from high charging power. We also designed 2 Drive Modes (mode 1 and mode 2) to adapt to varying levels of friction generated during the Z-axis movement. This friction is caused by differences in filament materials and printing tolerances.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-14_19fd9ddc08f65.jpg"></figure>We hope you enjoy it!<h3>Print preparation</h3><ul><li>You can preview the assembly diagram and create your favorite color schemes in Assembly View. Before printing, you can use the Assembly View function in Bambu Studio to access the assembly interface, customize your unique color scheme with the paint function, and preview the fully assembled model. (see the filament recommendation at the end of the article).</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-14_65f31a2393685.png"></figure><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-14_fa74a3d8e59a5.png"><h3>Installation and Operation Guide</h3><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Qn-RnEWsv5o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Qn-RnEWsv5o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>* The glue used in the tutorial is 416 glue, other types of superglue can also be used for assembly<h4>Choose Power Modes</h4>The wireless charger offers two different power modes: high power mode and low power mode. Due to the heat generated by the circuit board, charging coil, and phone during charging, the charging pad can become hot while charging the phone. Please adjust the mode according to the heat resistance of the filament used for printing before the first charge<ul><li>Low-power mode (5W): Use this mode if the heatbed is printed with filaments that have low heat resistance capabilities (such as PLA, PETG).</li><li>High-power mode (Max 15W): Use this mode if the heatbed is printed with filaments that have high heat resistance capabilities (such as ABS).</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-14_b0c414e861bcf.jpg"></figure>*It is recommended to use adapters that support the PD (Power Delivery) charging protocol or the QC (Quick Charge) charging protocol and need to meet the output power ≥ 18W and output voltage &gt; 12V. The above adapters can activate the maximum power of the wireless charger, but the actual charging power of the device to be charged is determined by the charging strategy of the device. For optimal charging efficiency, please align the phone&#39;s charging coil with the center of the heatbed and avoid using thick phone cases.<h4>Choose Drive Modes</h4>The button on the back side of the printer can switch the motor and LED modes.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-14_b1268f8e5abef.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_574753adfa6b4.png"></figure><figure class="media"><div data-oembed-url="https://youtu.be/ExzeR5QxOzQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ExzeR5QxOzQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/DIG-GDDVF2s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/DIG-GDDVF2s" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h4>Adjustable Z-axis Height</h4>The Z-axis height is adjustable. By removing the top cover and turning the hexagonal nut, you can adjust the initial position of the Z-axis. It is recommended to adjust the Z-axis clockwise to the top when using it for the first time. The Z-axis movement path is restricted, keeping a safe distance between the toolhead and the phone during operation.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-14_805b8d9acf2b8.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-18_de12934831944.jpg"></figure><h3>Nameplate Customization</h3>The nameplate can be redesigned and replaced according to your preferences using Make My Sign.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_d052e87463167.png"></figure>You can click the Customize button to open the nameplate template we designed for you, or design your own nameplate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-14_579d51758fb9.jpeg"></figure><h3>Compatible Hardware Kit</h3>Wireless Charger Kit-K012<a target="_blank" href="https://store.bambulab.com/products/wireless-charger-kit-012" rel="nofollow noopener">https://store.bambulab.com/products/wireless-charger-kit-012</a><h3>Recommended Filament</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-04-26_9fc0cfc6a21d1.jpg"></figure>&nbsp;Bambu PLA Matte Ivory White (11100)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40743590232179" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40743590232179</a>&nbsp;Bambu PLA Matte Charcoal (11101)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40743590297715" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40743590297715</a>&nbsp;Bambu PLA Basic Silver (10102)<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833550451" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820833550451</a>&nbsp;Bambu PLA Basic Jade White (10100)<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683</a>&nbsp;Bambu PLA Basic Black (10101)<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833648755" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820833648755</a>&nbsp;Bambu PLA Basic Bambu Green (10501)<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820836040819" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820836040819</a>&nbsp;Bambu PETG Translucent Clear (32101)<a target="_blank" href="https://store.bambulab.com/products/petg-translucent?variant=41695076515955" rel="nofollow noopener">https://store.bambulab.com/products/petg-translucent?variant=41695076515955</a>&nbsp;&nbsp;<ul><li>Use PLA basic jade white to print the light board to achieve well-balanced light-emitting effect.</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-14_7e7b86d93e95d.png"><h3>Design Takeaways-Linear Motion System</h3>We have designed a linear motion system which is utilized in the Z-axis module of this A1mini model. By combining elastic slides and stainless steel pins, smooth motion is achieved in a compact space, while adapting to different filaments and printer conditions.&nbsp;We believe this design can be applied to other models requiring similar linear motion systems. Therefore, we included a design introduction to this system, and uploaded the relevant model files to the &#34;Raw model&#34; file section. We hope this idea will be useful for creators.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_ff6a07df8c5f3.jpg"></figure><h2> </h2><h2>产品介绍</h2>这是一款 Q 版 A1 mini 造型的无线充电器创意模型，其适配的创意模型组件为 <a target="_blank" href="https://detail.tmall.com/item.htm?app=chrome&amp;bxsign=scdrZvNilLCkz803BNbwF6wqBXzwZClhJEY-NItj4OQArlobVf0CEpv9u57ZXHSnqbsQkK-oZOgVApnRK8nyvUPPvYi7PWZpsCXgmZTATMskfF5WyzR_4ZorDIXm0636Sn4&amp;cpp=1&amp;id=775131625842&amp;share_crt_v=1&amp;shareurl=true&amp;short_name=h.5C0Wc9c&amp;sourceType=item&amp;sp_tk=NkJCOFdNZkh5MUg=&amp;spm=a2159r.13376460.0.0&amp;suid=B4DAFE45-A1AE-479A-8815-693265A9175E&amp;tbSocialPopKey=shareItem&amp;tk=6BB8WMfHy1H&amp;un=6c300780debb3e1811b400f227c1d81b&amp;un_site=0&amp;ut_sk=1.Xu3MWeTq3f4DAM2NAQ2qw0hx_21380790_1710810902164.Copy.ShareGlobalNavigation_1&amp;skuId=5303809173825" rel="nofollow noopener">Wireless Charger Kit-K012</a>。&nbsp;它不仅模拟了A1 mini 的外观，也模拟了 A1 mini 的运动。使用USB Type-C（需自备）通电，将有无线充电功能的手机放置于热床位置，即可开始充电，Z 轴将模拟打印前准备的过程运动一次，显示屏与指示灯也将暂时亮起。此外，工具头可以被手动移动至 X 轴的任何位置，也可使用<a target="_blank" href="https://makerworld.com/zh/makerlab/makeMySign" rel="nofollow noopener">标牌定制器</a>为你的充电器设计专属铭牌。&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_771614128ffa7.jpg"></figure>考虑到大家可能使用不同的耗材打印，这款无线充电器设计了两个功率档位。当使用耐热性较差的 PLA 类耗材时，可以使用低功率档位，以防打印件因手机和线圈发热而变形。同时，由于不同耗材和打印机将带来不同的打印模型表面粗糙度，为保障 Z 轴运动流畅，我们也设计了两档不同动力的运动模式。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_d22c6f23b313a.jpg"></figure>希望你喜欢它！<h3>打印前准备</h3>开始打印前，你可以在 Bambu Studio 中使用装配体视图功能进入装配体界面，用涂色功能定制你的专属配色，并随时感受视觉效果 (推荐配色以及对应耗材见文末)。&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-18_5cc47129aabf5.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-18_b7597145bef2.jpg"></figure><h3>安装调试</h3><figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1oK421v7mv/"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1oK421v7mv&amp;autoplay=0&amp;poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1oK421v7mv&amp;autoplay=0&amp;poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>*组装视频中使用的胶水款式为416胶水，其他款式如502胶水亦可用于组装&nbsp;无线充电器提供两种不同的功率模式，高功率模式及低功率模式。由于电路板、充电线圈、手机在充电时会发热，初次充电前，请根据打印件所使用耗材的耐热性能调节档位。<ul><li>低功率模式（5W）：当热床使用耐热能力较低的耗材（如PLA、PETG）打印时，请使用该模式。</li><li>高功率模式（最高15W）：当热床使用耐热能力较高的耗材（如ABS）打印时，请使用该模式。</li></ul>*建议使用支持pd充电协议或者qc充电协议的适配器，且需要满足输出功率≥18W，输出电压＞12V。以上适配器可以激发无线充电器的最大功率，但待充电设备实际充电功率由待充电设备的充电策略决定。请尽量将手机充电线圈与热床板中心对齐，并避免使用过厚的手机保护壳，以获得最佳的充电效果。&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_8c398759233b3.jpg">&nbsp;通过按压开关切换电机及LED灯的工作模式&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_9fcfa7632d132.jpg"></figure>所有驱动模式按固定的循环顺序排列（1至7）。每次按下驱动模式开关都会使无线充电器切换到下一个模式。A1 Mini无线充电器不兼容模式3到模式6。为了防止对模型和器件造成潜在损坏，请不要长时间保持在模式3到模式6。<h4>无线充组件工作模式展示</h4><ul><li><a target="_blank" href="https://public-cdn.bblmw.com/wiki/A1-mini/%E6%97%A0%E7%BA%BF%E5%85%85%E7%94%B5%E7%BB%84%E4%BB%B6%E6%A8%A1%E5%9E%8B%E5%B7%A5%E4%BD%9C%E6%A8%A1%E5%BC%8F%E5%B1%95%E7%A4%BA.mp4" rel="nofollow noopener">https://public-cdn.bblmw.com/wiki/A1-mini/无线充电组件模型工作模式展示.mp4</a></li><li><a target="_blank" href="https://public-cdn.bblmw.com/wiki/A1-mini/%E6%97%A0%E7%BA%BF%E5%85%85%E7%94%B5%E7%BB%84%E4%BB%B6%E5%85%83%E5%99%A8%E4%BB%B6%E5%B7%A5%E4%BD%9C%E6%A8%A1%E5%BC%8F%E5%B1%95%E7%A4%BA.mp4" rel="nofollow noopener">https://public-cdn.bblmw.com/wiki/A1-mini/无线充电组件元器件工作模式展示.mp4</a></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_75899b6b385dd.png"></figure>&nbsp;通电前，可顺时针拧动螺杆顶部的六角螺母，将 Z 轴调节至顶端，以方便取放手机。后续使用过程中，如需调整 Z 轴高度，也可以拆卸顶盖，根据需求拧动六角螺母。同时，Z轴的运动路径设有限制，不用担心工具头在运动过程中损坏手机。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_2cb70a69f0598.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_a36e0e893e33c.jpg"></figure><h3>个性创作</h3>我们预留了一块粘贴铭牌的空间，可根据个人喜好便捷地自行设计、更换。&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_519df32ee8f29.png"><h4>铭牌 DIY 教程</h4>您可以点击详情页的定制按钮打开我们为您设计的铭牌模板，或者设计属于自己的专属铭牌。&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-15_c76c7aee96aeb.jpeg"></figure><h3>耗材推荐</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-04-26_1d1eb29e9c89a.jpg"></figure>&nbsp;拓竹 PLA Matte 象牙白 (11100)<a target="_blank" href="https://item.jd.com/10056779154978.html#crumb-wrap" rel="nofollow noopener">https://item.jd.com/10056779154978.html#crumb-wrap</a>&nbsp;拓竹 PLA Matte 炭黑色(11101)<a target="_blank" href="https://item.jd.com/10056779154984.html#crumb-wrap" rel="nofollow noopener">https://item.jd.com/10056779154984.html#crumb-wrap</a>&nbsp;拓竹 PLA Basic 银色 (10102)<a target="_blank" href="https://item.jd.com/10056799182826.html#crumb-wrap" rel="nofollow noopener">https://item.jd.com/10056799182826.html#crumb-wrap</a>&nbsp;拓竹 PLA Basic 白色 (10100)<a target="_blank" href="https://item.jd.com/10074159254701.html#crumb-wrap" rel="nofollow noopener">https://item.jd.com/10074159254701.html#crumb-wrap</a>&nbsp;拓竹 PLA Basic 黑色 (10101)<a target="_blank" href="https://item.jd.com/10067032530320.html#crumb-wrap" rel="nofollow noopener">https://item.jd.com/10067032530320.html#crumb-wrap</a>&nbsp;拓竹 PLA Basic 拓竹绿 (10501)<a target="_blank" href="https://item.jd.com/10061058199924.html#crumb-wrap" rel="nofollow noopener">https://item.jd.com/10061058199924.html#crumb-wrap</a>&nbsp;拓竹 PETG Translucent Clear透明 (32101)<a target="_blank" href="https://item.jd.com/10098876854260.html#crumb-wrap" rel="nofollow noopener">https://item.jd.com/10098876854260.html#crumb-wrap</a>&nbsp;推荐使用 PLA Basic 玉石白打印灯板（图中手持部件），可让logo的均光效果更好。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121092/design/2024-03-18_95e9fe9eb702b.png"></figure><h3>设计分享-直线运动系统</h3>我们设计了一个平滑的直线运动系统，运用在打印机的Z轴模组中。通过打印的弹性滑块和钢销的结合，可以在较小的空间内兼顾运动的流畅性、对不同耗材与打印机状况的适应性。我们认为这个设计也可以用在其他有类似直线运动系统需求的模型中，因此在文末有关于该系统的一个设计介绍，并且我们将该系统所涉及的模型文件上传到原始模型文件中，希望可以帮助创作者将该设计运用于您自己的模型。

A1 mini Wireless Charger

charger

Rott3D

Enjoy this detailed ancient helmet

historical helm

bibel

AU3D

<h3>Key Advantages</h3><ul><li>Only 7g of filament per ring.</li><li>Compatible spool brand name impressed.</li><li>Rounded contour helps with traction, avoids pullback errors and stabilizes the spool inside the AMS.</li><li>Rounded contour lowers the chance of damaging plastic storage bags.</li><li>Flat variant for full AMS compatibility (see tolerance and compatibility section)</li></ul><h3>Description</h3>This isn&#39;t merely a typical cardboard spool adapter. By decreasing its contact area by approximately 50-60% compared to standard adapters, it significantly enhances contact pressure. Consider it akin to winter tires on a car, which generally require higher pressure to minimize their contact area with the ground. Additionally, its rounded edges help stablizing the Spool inside the AMS and minimize the likelihood of damaging plastic vacuum bags. The adapter is not only lightweight, weighing a mere 7 grams of filament, but it is also reusable and easily attaches in the same manner as conventional adapters.&nbsp;This adapter has proven to be a game-changer, eliminating the need for other AMS modifications that claim to address retraction and entanglement issues. Remarkably, I’ve found that spool weights are no longer necessary. However, as with any solution, individual results may vary. Happy printing!<h3>Tolerances</h3>Compared to plastic spools, cardboard spools are more vulnerable to various external factors, such as moisture, temperature fluctuations, and variations in the production process. Consequently, you may encounter slight variations in the fit, which can range from slightly looser to tighter. In extreme cases, the spool adapter may not fit at all. In these scenarios, you can make the necessary adjustments to the model&#39;s scale using the Bambu Slicer for both the X and Y axes. Ensure that you uncheck the &#34;uniform scale&#34; option before proceeding. If your spool&#39;s diameter exceeds the default setting, consider increasing the scale by 1%. Conversely, if your spool&#39;s diameter is smaller, reduce the scale by 1%, and your setup should be ready for use.<h3>Compatibilty</h3>Overture Cardboard Spools tend to be on the larger side of the spectrum. While they can fit without an adapter, when paired with the adapter, they surpass Bambu Labs’ specifications. Consequently, users have a couple of options to address this:<ul><li>AMS Lid Spacer: Utilizing a spacer for the lid can accommodate the larger spools effectively.</li><li>Custom Backside Rollers: Alternatively, consider implementing custom backside rollers specifically designed to support these larger rolls.</li><li>For a straightforward solution, leaving the lid open (or at least not locking it) provides ample room for the spool.</li></ul>For individuals who prefer not to alter their AMS and wish to close the lid, I have incorporated a nearly flat variant that aligns with Bambu Labs’ specifications.<h3>Printing</h3>When it comes to printing, you should produce two adapters for each cardboard spool. It is advisable to steer clear of materials that exhibit low friction, such as Silk-PLA, to ensure optimal performance. Most of the time I use Standard PLA.<h3>Other Filament Brands</h3>This adapter is available for other brand&#39;s cardboard spools (<a target="_blank" href="https://makerworld.com/en/@AU3D/collections/565167" rel="nofollow noopener">Link to Collection</a>):<ul><li><a target="_blank" href="https://makerworld.com/en/models/251717" rel="nofollow noopener">3DGenius</a></li><li><a target="_blank" href="https://makerworld.com/en/models/233956" rel="nofollow noopener">3DHojor</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197741" rel="nofollow noopener">Aceaddity</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197938" rel="nofollow noopener">ANYCUBIC</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197839" rel="nofollow noopener">ATA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/377775" rel="nofollow noopener">Bblife</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254552" rel="nofollow noopener">Colorful</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192941" rel="nofollow noopener">Comgrow</a></li><li><a target="_blank" href="https://makerworld.com/en/models/492894" rel="nofollow noopener">Copymaster 3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192757" rel="nofollow noopener">Creality</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253694" rel="nofollow noopener">CUIEED</a></li><li><a target="_blank" href="https://makerworld.com/en/models/251342" rel="nofollow noopener">Dikale</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376740" rel="nofollow noopener">DO3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/237701" rel="nofollow noopener">Duramic 3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180213" rel="nofollow noopener">Elegoo</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194714" rel="nofollow noopener">ENISINA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/456459" rel="nofollow noopener">Eono</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175447" rel="nofollow noopener">Eryone</a> / <a target="_blank" href="https://makerworld.com/en/models/372282" rel="nofollow noopener">Eryone 2024+</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180253" rel="nofollow noopener">eSun</a></li><li><a target="_blank" href="https://makerworld.com/en/models/246501" rel="nofollow noopener">Filafarm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/377992" rel="nofollow noopener">Firos</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376304" rel="nofollow noopener">Flashforge</a></li><li><a target="_blank" href="https://makerworld.com/en/models/196175" rel="nofollow noopener">FormFutura</a></li><li><a target="_blank" href="https://makerworld.com/en/models/505839" rel="nofollow noopener">Gembird</a></li><li><a target="_blank" href="https://makerworld.com/en/models/375168" rel="nofollow noopener">GNVTNTP</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192804" rel="nofollow noopener">GratKit</a></li><li><a target="_blank" href="https://makerworld.com/en/models/246162" rel="nofollow noopener">Grauts</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253905" rel="nofollow noopener">Inland</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254313" rel="nofollow noopener">IWEColor</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192773" rel="nofollow noopener">JAMG HE Conjure</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175622" rel="nofollow noopener">Jayo</a></li><li><a target="_blank" href="https://makerworld.com/en/models/176924" rel="nofollow noopener">Kexcelled</a></li><li><a target="_blank" href="https://makerworld.com/en/models/489368" rel="nofollow noopener">Kingroon</a></li><li><a target="_blank" href="https://makerworld.com/en/models/375526" rel="nofollow noopener">Kinluot</a></li><li><a target="_blank" href="https://makerworld.com/en/models/249610" rel="nofollow noopener">Kretrum</a></li><li><a target="_blank" href="https://makerworld.com/en/models/252594" rel="nofollow noopener">Lovoon</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376013" rel="nofollow noopener">Mchyi</a></li><li><a target="_blank" href="https://makerworld.com/en/models/245976" rel="nofollow noopener">Meltbro</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253497" rel="nofollow noopener">MKOEM</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194179" rel="nofollow noopener">Ninetec</a></li><li><a target="_blank" href="https://makerworld.com/en/models/245837" rel="nofollow noopener">OEM Mika3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175704" rel="nofollow noopener">Overture</a></li><li><a target="_blank" href="https://makerworld.com/en/models/237378" rel="nofollow noopener">OVV3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/177047" rel="nofollow noopener">Polymaker</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254827" rel="nofollow noopener">Protopasta</a></li><li><a target="_blank" href="https://makerworld.com/en/models/239790" rel="nofollow noopener">R3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/238604" rel="nofollow noopener">Raise3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/206466" rel="nofollow noopener">Redline Filament</a></li><li><a target="_blank" href="https://makerworld.com/en/models/234098" rel="nofollow noopener">Reprapper</a></li><li><a target="_blank" href="https://makerworld.com/en/models/492951" rel="nofollow noopener">Prima Creator</a></li><li><a target="_blank" href="https://makerworld.com/en/models/193658" rel="nofollow noopener">Prindano</a></li><li><a target="_blank" href="https://makerworld.com/en/models/196488" rel="nofollow noopener">SainSmart</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194367" rel="nofollow noopener">Sovol</a></li><li><a target="_blank" href="https://makerworld.com/en/models/242422" rel="nofollow noopener">Spectrum</a></li><li><a target="_blank" href="https://makerworld.com/en/models/235861" rel="nofollow noopener">Sunlu Elite Series</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194269" rel="nofollow noopener">Tinmorry</a></li><li><a target="_blank" href="https://makerworld.com/en/models/206360" rel="nofollow noopener">Tronxy</a></li><li><a target="_blank" href="https://makerworld.com/en/models/238095" rel="nofollow noopener">TTYT3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194520" rel="nofollow noopener">Two Trees</a></li><li><a target="_blank" href="https://makerworld.com/en/models/236118" rel="nofollow noopener">Yousu</a></li><li><a target="_blank" href="https://makerworld.com/en/models/234380" rel="nofollow noopener">YOYI YOYI</a></li></ul>

OVERTURE Cardboard Spool Adapter

spools

clehn8ok

Fidget Pill Organizer in Oreo Style, with 7 compartments 28mm x 12mm x 10mm&nbsp;See it in action:<figure class="media"><div data-oembed-url="https://youtu.be/tvKOu8KY6dk?si=vWfUTmmwWsBsnm-K"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/tvKOu8KY6dk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;everything is pressfit, but you can use some superglue just to be safe.&nbsp;prints withtout supports, but i'd recommend to print the two disks with support, since it ensures a better pressfit&nbsp;Assembly:<ul><li>Bottom</li><li>press in the white ring</li><li>insert the golden hub</li><li>press the white main body onto the white ring (you can use some superglue between the bottom and the main body, but keep the spring clear)</li><li>press on the top, note the direction of the cutout</li></ul>

Fidget Pill Organizer 

tabletten

Makerspace.Online

A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required to assemble. The tollerances are tight. And some materials work better then others. I have had best results using Basic PLA. Available patterns:3 Rollers available, more patterns can be found on <a target="_blank" href="https://makerworld.com/en/u/2755972568" rel="nofollow noopener">my makerworld page!</a> - Confetti - ZigZag - Polkadot Follow me on <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">my instagram</a> for updates on new patterns and uploads! Assembly:  (Pro tip: use some lubrication grease / vaseline around the gears for a better working!!) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_cca5dc6403a79.png"> Make sure to allight the bottom gears maked with the dot and allign with the stipe.  Do not forget to add some lubrication / grease between and underneath the gears! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_d2c9531e7e588.png"> For the top gears some marks are present as well to allign the gears properly! Also here! Do not forget to add some lubrication / grease between and underneath the gears!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_2b0339c954b2b.png"> Note:  This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product. <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">Instagram:</a> <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener"><img class="image_resized" style="width: 8.56%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/a1ec037c-99fb-4f6f-9216-f4866257bed3.png" alt="Instagram, logo, social, social media icon - Free download"></a>

Business Card Embosser - Level up your cards! 

business

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_rk3rntee47nu.png"></figure><h4>Dimensions (LxWxH)</h4>132 x 150 x 32mm (100% scale)<h4>Basic information</h4>The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. The model is is split into 6 movable parts: a shell, which serves as a centerpiece, a head, and 4 fins. It prints in place, and no additional assembly is required. The base model is slightly oversized, so that all the fine details come out nicely, namely if you're printing in multicolor. If you're printing it in a single color only, and aren't bothered with loss of definition too much, feel free to downscale it to your liking. The model has been thoroughly tested, and should print fine up to 50% of the original size in single color, if you have a well calibrated, and reasonably accurate setup.<h4>Files information</h4>I've included 5 files: All of them are in the .stl format, and sorted into 2 folders. The folders are labeled Single color and Multicolor, the single color folder contains 1 file, which is a plain, 1 piece version of the model, intended for single color printing. The Multicolor folder contains 3 files for multicolor printing, each file is named after the color, which was used on the example model in the image gallery. Import them all at once into your slicer as one file with multiple parts, and it should automatically align the parts, and assign an individual color to each of them.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_vigsf58o172r.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>15%<h4>Support</h4>None. The model doesn't require any support material.<h4>Scaling</h4>Possible, but mind the accuracy of your setup. If you go too far with your scaling experiments, you might run into issues such as fused segments, or fragile links. If you have a well calibrated setup, you should be able to print the model at up to 50% of the original size without any issues, other than a definition loss.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, the contact area with the buildplate should be sufficient. However if your print surface suffers from poor adhesion, consider using an adhesive spray, or some other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be too difficult, and inconvenient to remove afterwards.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_s3a36s7dnq9a.png"></figure>This section contains a list of all updates and fixes, which were introduced to the model along the way. Each update will be thoroughly explained, so that you know, which issue was each specific update addressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_iogqewhn95rb.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_gdflo6b9cpom.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please contact me via dm, and we will talk over further details, terms and conditions, and your individual pricing plan.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_g5kaaodclbq6.png"></figure>If you like my work, and want to support it, you can buy me a coffee at <a target="_blank" href="https://www.buymeacoffee.com/jd3d" rel="nofollow noopener">https://www.buymeacoffee.com/jd3d</a> , so that I can keep my designs free for everyone.

Articulated Sea Turtle (singlecolor and multicolor)

spielzeug

3DP RNS

[3DP RNS] Headless V1.0 (3D Printed Robot)<ul><li>Series : 4 Legs / Animaloid Type [<a target="_blank" href="https://youtube.com/shorts/7H5wkBNzwhY?feature=share" rel="nofollow noopener">Youtube Video</a>]</li><li>This Is an all at once print. Assembly not required :)</li><li>If you subscribe to the YouTube channel [<a target="_blank" href="https://bit.ly/2KC3Tdx" rel="nofollow noopener">3DP RNS</a>], ★ a new robot will be revealed.</li><li>Thank you for your subscribing! It means a lot to me :)</li><li>Commercial License [<a target="_blank" href="https://www.patreon.com/3DPRNS" rel="nofollow noopener">Patreon</a>]</li></ul>&nbsp;※ Notice For my uploaded robot model to enable all joints to move, it&#39;s advisable to use a Brim.  If removing Brim is inconvenient or challenging, I don&#39;t recommend printing it.  Also, joint functionality may vary depending on the printer and filament you use. I hope your print is successful and you can have a robot with well-functioning joints.<figure class="media"><oembed url="https://www.youtube.com/shorts/7H5wkBNzwhY"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Cubrick &amp; Cube Case V1.0 (3D Printed Robot)<ul><li>Series : 4 Legs / 4-Legged Spider Type</li><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-cubrick-100906643?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Cubrick &amp; Cube Case V1.0 Download [Patreon]</a></li><li>Cubrick &amp; Cube Case V1.0 can be obtained through Patreon (Hero) membership.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/q0NL_I6283k"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Optronic V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-optronic-103196500?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_fan&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Optronic V1.0 Download [Patreon]</a></li><li>Optronic V1.0 can be obtained through Patreon (Hero) membership.</li><li>This robot is equipped with a camera on the front of its head, which has various features such as infrared and thermal imaging.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/8-6pLwAEBuQ"></oembed></figure>

[3DP RNS] Headless_V1.0

space

PrintGeggo

The English translation is below.&nbsp;Dies ist ein Remix von dem bekannten Spiel Quoridor.&nbsp;Spieleranzahl: 2 – 4 Ziel: Mit seiner eigenen Figur die gegenüberliegende Seite des Spielbrettes als Erster zu erreichen Vorbereitung: Die 20 Wände werden gerecht zwischen den Spielern aufgeteilt.&nbsp;<ul><li>Das Spiel beginnt in der ersten Reihe in der Mitte (bei zwei Spielern ist es mit dem Plus gekennzeichnet.)</li><li>Der Spieler bewegt entweder seine Figur oder stellt eine Wand auf. Beides ist in einem Zug nicht möglich.</li><li>Auf der Plattform platzierte Wände müssen an 4 Felder angrenzen und können nicht mehr verschoben werden.</li><li>Es wird reihum gespielt, dabei darf die Figur (sofern der Weg nicht blockiert ist) in alle vier Himmelsrichtungen bewegt werden.</li><li>Wenn sich zwei Spielfiguren gegenüberstehen kann der Spieler, der am Zug ist, über die gegnerische Spielfigur springen. Wenn das Feld hinter der übersprungenen Figur durch eine Wand oder eine weitere Figur blockiert ist, darf ein freies Feld links oder rechts von der übersprungenen Figur gewählt werden.</li><li>Die Wände müssen so platziert werden, dass alle Spieler noch die Möglichkeit haben, ihre Zielseite zu erreichen.</li><li>Wenn der Spieler keine Wände mehr hat, muss er mit seiner Figur einen Zug machen. Deshalb sollten die Wände sinnvoll eingesetzt werden, weil sie gegen Ende des Spiels eine sehr entscheidende Rolle spielen können.</li><li>Der erste Spieler, der eines der 9 Felder in der letzten Reihe der Spielplattform erreicht, gewinnt das Spiel.</li></ul>Storage box for Quoridor von Crunchy<a target="_blank" href="https://makerworld.com/en/models/142419#profileId-155060" rel="nofollow noopener">https://makerworld.com/en/models/142419#profileId-155060</a>&nbsp;---------------------------------------&nbsp;Google translation:This is a remix of the famous game Quoridor.&nbsp;Number of players: 2 – 4 Goal: To be the first to reach the opposite side of the game board with your own figure Preparation: The 20 walls are divided equally between the players.&nbsp;<ul><li>The game begins in the front row in the middle (if there are two players, it is marked with a plus.)</li><li>The player either moves their figure or puts up a wall. Both are not possible in one go.</li><li>Walls placed on the platform must be adjacent to 4 spaces and can no longer be moved.</li><li>It is played in turns and the figure can be moved in all four directions (as long as the path is not blocked).</li><li>When two pieces face each other, the player whose turn it is can jump over the opposing piece. If the space behind the skipped piece is blocked by a wall or another piece, you may choose a free space to the left or right of the skipped piece.</li><li>The walls must be placed so that all players still have the opportunity to reach their target side.</li><li>When the player runs out of walls, he must make a move with his figure. That's why the walls should be used wisely because they can play a very crucial role towards the end of the game.</li><li>The first player to reach one of the 9 spaces in the last row of the playing platform wins the game.</li></ul>Storage box for Quoridor by Crunchy<a target="_blank" href="https://makerworld.com/en/models/142419#profileId-155060" rel="nofollow noopener">https://makerworld.com/en/models/142419#profileId-155060</a>

Quoridor (Maze Board Game)

spiele

maxaruta

This photobox features a 360-degree rotating base, which allows you to take photos from any angle. It is also fully customizable, thanks to the variety of wall styles available. With my photobox, you can significantly improve the perceived quality of your products to your customers. Your photos will be more professional and engaging, and your customers will be more likely to purchase them. Download the model today and start taking professional photos of your creations! _____________________________ Ti presento la mia nuova photobox, lo strumento perfetto per creare fotografie professionali delle tue stampe e creazioni.&nbsp;Questa photobox è dotata di una base d'appoggio ruotabile a 360 gradi, che ti permette di scattare foto da qualsiasi angolazione. Inoltre, è personalizzabile al massimo, grazie ai vari stili di pareti disponibili.&nbsp;Con la mia photobox, potrai migliorare notevolmente la qualità percepita dai tuoi clienti dei tuoi prodotti. Le tue foto saranno più professionali e accattivanti, e i tuoi clienti saranno più propensi ad acquistarli.&nbsp;Scarica il modello subito e inizia a scattare foto professionali delle tue creazioni!

Photobox: Take professional photos of your creations

fotobox

Waikikiprod

Bambulab X1C Keychain to thank Bambulab for making me a Beta tester and for his trust.A big thank you to Sybil from Bambulab ;)&nbsp;All commercial use is therefore reserved for Bambulab&nbsp;Discover my other Bambulab Keychain<figure class="table" style="width:98.39%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:65.16%;"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_55efa27a278d18.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/14268?profileId=14283" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_79d683b6450c1.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14268?profileId=14283" rel="nofollow noopener">P1S Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/14419?profileId=14439" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_31c4c4cae52bb.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14419?profileId=14439" rel="nofollow noopener">MakerWorld keychain</a></td></tr></tbody></table></figure>&nbsp;Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons </a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>

X1 Carbon Keychain - "Never without my X1C"

geschenk

Filar3D

Give some life to your business card with the embosser system - 1 Design Included: Lightning Wanna make your own Custom Rollers? Fusion360 files + video tutorial → <a target="_blank" href="https://cults3d.com/en/3d-model/gadget/make-your-own-business-card-embosser-fusion-360-files" rel="nofollow noopener">FUSION360 FILES</a> <figure class="media"><div data-oembed-url="https://youtu.be/V0X9hO-8_uA?si=LK7mVouRukH5EY4c"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/V0X9hO-8_uA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Get the FULL 13 PATTERN PACK here: <a target="_blank" href="https://cults3d.com/en/3d-model/tool/the-business-card-embosser-system" rel="nofollow noopener">https://cults3d.com/en/3d-model/tool/the-business-card-embosser-system</a>13 awesome Designs available on the link: · Like a Sir · Dots · Waves · Checkers · Lightning · Fancy · Connect · ZigZag · Smiley · Sunglasses · Headphones · Flexing Emoji · Hearts HOW DOES IT WORK? Simply turn the rollers and a cool pattern will emboss on your card. HOW MANY PARTS? The whole system consists on 4 prints: ·Body_cap1 ·Body_cap2 or body_cap2_tigther_tolernaces ·Roller_a ·Roller_b Of course you can print 1 single body and swap rollers, they just pressure fit.&nbsp;PRO TIP: Use it not only on business card, get creative and make other awesome pieces of art.

The Business Card Embosser System

stempel

3DPODesigns

Just a sleek, modern vase/planter. Both base and vase have a drainage hole in the middle if used with live plants.&nbsp;Instructions: Print vase, base and 4 feet. Holes in the bottom of the base and pegs on the feet make a push to fit assembly simple. Glue can be used if needed, but from my tests should not be.&nbsp;Model shown printed with Hatchbox Granite PLA for vase, Hatchbox Wood for base/feet.0.2 layer height, default settings on Bambu P1P&nbsp;If you found this useful, please consider buying me a <a href="https://bmc.link/3DPO" rel="nofollow">beer</a>!

Modern Vase/Planter with Stand

vase

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/61546/2023-09-28_330ce25282a63.jpg"></figure>&nbsp;Simple, easy to print and assemble LED riser for top mounted AMS systems on Bambi X1/X1C/P1S or enclosed P1P. &nbsp;I recommend printing in PETG, though I've also printed a full Bambu Brite in PLA and it seemed fairly strong. &nbsp;**Keep in mind this may affect the Lidar on X1C's, so it would be best to leave it off during calibration. I do not own an X1C so I cannot test which level a light is ok, but if you'd like to test this yourself please use a dimmable LED strip. **I've also had a comment on Reddit saying he noticed Bambu Brite sliding during fast prints. I haven't experienced this, so this may depend on the filament used and smoothness of the plate, but I cannot confirm. If you experience this or just want to avoid it, please print and install the TPU pads.&nbsp;UPDATE: I haven't noticed any scratching of the glass from Bambu Brite sitting directly on the glass, however based on questions on Reddit I've decided to add OPTIONAL TPU pads via a profile as well as separate STL's. These will require glue (I used a few lines of hotglue for my testing). They are the same assembly format as Bambu Brite itself, however they do not stay together as a whole without being glued down. They do have small edges that make them easily guided into place and don't obstruct the final look of Bambu Brite. TPU pad assembly pictured below.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/61546/2023-09-30_224d3475b5379.png"></figure>&nbsp;&nbsp;I've included 3mf files for both painted logo, and inset logo for those of you that don't want to print in multicolor.Simply print both files, and use the easy tabs/slots to assemble the left side pieces and right side pieces separately. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/61546/2023-09-29_8d2b633ba8d5c8.jpeg"></figure>Once the left and right sides are complete, simply guide them together and press fit to have a completed Bambu Brite.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/61546/2023-09-29_5ab5c12d200a18.jpeg"></figure>&nbsp;I've intentionally made the LED track larger than some other similar LED risers to accommodate larger LED strips (up to 16mm wide), and to make installation of smaller LED strips easier. I recommend using additional adhesive backing if the adhesive that came on your LED strip isn't strong enough to maintain during radiated heat during prints.&nbsp;Important: The flexibility and adhesive quality of LED strips can vary. If you’re having any issues getting yours to adhere simply place it as best you can and run a bead of hot glue on both edges of the LED. &nbsp;Carefully place your LED strip along the track, fitting the power wire through the channel exiting your Bambu Brite. Trim any excess at the marked cut locations on your chosen LED strip. You're now done with assembly!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/61546/2023-09-29_f8c3dbebc898a.jpeg"></figure>&nbsp;Place your Bambu Brite on top of your Bambu printer in the same location you'd normally place your AMS, then set your AMS on top of your Bambu Brite. Bambu Brite was designed to be form fitting, but not snug. It can be easily placed and removed numerous times for maintenance without causing damage to your printer or Bambu Brite. &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/61546/2023-09-29_4ed4c1ac488788.jpeg"></figure>&nbsp;Plug it in, turn it on and enjoy finally being able to see what you're printing!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/61546/2023-09-29_db01a9cdf7e2d8.jpeg"></figure>Happy printing!&nbsp;&nbsp;&nbsp;