mathesonmd

rsilvers

I wanted a way to carry bits for a Milwaukee Fastback 1505. Print the core in TPU, and the shell in something rigid. If you find that the fit is too tight, you can use X-Y hole compensation under the Quality settings in Bambu Slicer.

EDC hex bit holder for pocket carry

kyle.sawyer2010

I was commissioned to design and print an electric guitar pickup for a custom guitar builder. This is what I came up with. He was super happy with it and I was pretty impressed with myself. So I am uploading it here for all of you to enjoy.

Electric Guitar Pickup

guitar

gridfinity

Ocular Dynamic

Cool retractable karambit knife remix of a remix originally of cat claw box cutter. I'll have a profile that all one color and a 2nd profile with 2 plates, body separate from links so you can make them different colors if you wish.&nbsp;I only put supports for the hex nuts on the blade holder to make sure its clean. Push em out super easy with the hex key wrench through the hole from the other side.&nbsp;Assembly PartsFor Body:4x - M3x16mm screws4x - M3 Nuts&nbsp;For Blade:2x - M3x5 Screws2x - M3 Nuts&nbsp;Magnets [Optional]:3x - 6mm x 3mm

Retractable Karambit Knife

random stuff

bestseries

模型剪钳放置架

workshop

Marco Tiburtini

My ultimate box to hold your battery! Thougt for AA, AAA, LR44, CR2032 and MN21 battery.With a practical cover that will allow you to transport the batteries without mixing them.I Hope you will enjoy it!&nbsp;Warning: print this project swiching off the Auxiliary Fan and setting the temperature of plate at 60 degrees.

Batteries Holder Box Organizer

household 

Madtrap

<h2>Nut & Bolt Sorting Tool (M3-M16)</h2>Tool for sorting nuts and screws. Measurements is sized after M3 to M16 machine screws and bolts.It has a mounting ring to hang it on your tool wall and 2 colors to make it easy to read the numbers. Happy Printing! Me and my brother spend time on this for our own enjoyment and just want to share our work with the community.If you like any of our models we would appreciate a comment or upvote on the model you like. Also, always feel free to contact us if you have any suggestions for new or current models. If you want to buy us a coffee use our <a target="_blank" href="https://paypal.me/madtrap" rel="nofollow noopener">Paypal</a>

Nut & Bolt Sorting Tool (M3-M16)

Measurement

Boba Boy

xTool D1 Pro Honeycomb Guider.&nbsp;Two options for the pin,1. print the pins.2. Honeycomb Pins from Amazon (<a target="_blank" href="https://www.amazon.ca/gp/product/B0BX51BSP2" rel="nofollow noopener">https://www.amazon.ca/gp/product/B0BX51BSP2</a>) not an affiliate link

xTool Honeycomb Guider

XTOOL upgrades

Maoirae

Designed my own filament spool shelf in honeycomb design. There are 3 versions, for 1" inch wooden dowel, 23mm dowel and 20mm dowel. Used 2pcs M5 wall screws per bracket, spacing between top and bottom screw is 95mm. Its designed just to slid onto mounted screws, witch should have 5mm space between screw head and wall.&nbsp;Added template for easier drilling holes and adjust right screw distance, also added plane if you want to you use spirit level.&nbsp;Added endcap for those whom wooden dowel extends from shelf bracket to prevent filament spool tipping over. Also made divider so you can separate different type of filaments from each other on one shelf and not mixing them accidentaly. Here: <a target="_blank" href="https://makerworld.com/en/models/117747#profileId-126576" rel="nofollow noopener">https://makerworld.com/en/models/117747#profileId-126576</a>&nbsp;Also added filament material tags so you can separate different type of filaments from each other, here: <a target="_blank" href="https://makerworld.com/en/models/117775#profileId-126618" rel="nofollow noopener">https://makerworld.com/en/models/117775#profileId-126618</a>&nbsp;

EDC