mathced

ZanderDesignStudio

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA Elegoo Black PLA+ IIID Max Blue PLA+ IIID Max Light Blue PLA PolyTerra Cotton White&nbsp;Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Blue At layer #8 (0.72mm) swap to Light Blue At layer #13 (1.12mm) swap to Cotton White for the rest.

Shark Bait Hueforge

版畫

TrocheHole

Magnets in the shape of Shurikens, one of the Ninja weapons.&nbsp;<h3>Caution</h3><figure class="table"><table><tbody><tr><td style="background-color:#f0f0f0;border:20px solid #f0f0f0;">Please be careful not to injure others or yourself, as the shapes of the models are very sharp.</td></tr></tbody></table></figure>&nbsp;<h3>About Magnets</h3>Use neodymium magnets.Magnets need to be glued.&nbsp;Size ─ DIA6mm × T3mmNumber Used ─ For the following models, put two magnets on top of each other. <ul><li>Shuriken-Magnet_Six-pointed_body.stl</li><li>Shuriken-Magnet_Three-pointed_body.stl</li></ul>For other models, insert one magnet per hole.

Shuriken Magnet — Ninja Weapons

有趣模型

LayerModels

<h4>Create your own name in 3D!</h4>The file contains the complete alphabet in the standard font. Print the letters you need and snap them together. Don't forget to print the endcaps to complete your nametag.You can even use the letters to print your own message or slogan.&nbsp;Other fonts are available <a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/3d-letters" rel="nofollow noopener">here</a>&nbsp;<a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/3d-letters" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/364477/rich_content/68da15ea-d698-41a1-8dbf-c369975fbdd6/thumbs/cover/800x1208/png/overview-fonts.webp"></a>If you like my work please consider supporting me by downloading one of these cool fonts for less than the price of a coffee, thanks!&nbsp;Print settings&nbsp;The 3D letters were tested in PLA with 0.2mm layer height. Print in the given orientation and no support is needed. Ensure a good first layer adhesion with sufficient bed temperature and slow first layer speed. Avoid elephant footing.&nbsp;----------&nbsp;Subscribe to <a target="_blank" href="https://patreon.com/LayerModels" rel="nofollow noopener">my patreon</a> if you are interested in a license to sell your prints commercialyFollow me on <a target="_blank" href="https://www.instagram.com/layermodels/" rel="nofollow noopener">instagram</a> to stay up to date with my latest 3D Models

3D Name from letters - Standard font

裝飾

Meister Edel

<h2> Check Out the new V2 :) <a target="_blank" href="https://makerworld.com/de/models/105998#profileId-113399" rel="nofollow noopener">https://makerworld.com/de/models/105998#profileId-113399</a> Summary</h2>Board 1: WIth Chamfer / Mit Fase Board 2: With radius / Mit Radius&nbsp;&nbsp;No glue is required due to the small tolerances and the intentional pressfit.&nbsp;Tip: assemble the wheels in a vice if the pressfit is too tight!Have fun printing, assembling and playing: D!&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Qr4Y9QN1GNo&t=1s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Qr4Y9QN1GNo?start=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Notes: Use supports with the board! Axis, Axis inserts & Wheels dont need Supports.Round Axis part with 0% Infill and 1 Perimeter to avoid seamsPrint 0,1 - 0,2 mm layer hight.

Robust Fingerskateboard

玩具

maximdivirgilio

Taipei 101, Taipei, Taiwan&nbsp;1 : 2500 Scale Model&nbsp;0.2mm Nozzle Highly Recommended&nbsp;No Supports

Taipei 101 Scale Model Display

建築

Stag 3D

<h3>How to play:</h3><ol><li>Setup the base on a flat surface and place the Tetra Balance block onto it.</li><li>Take it in turns with your opponent to place the blocks onto the Tetra Balance piece. You can place the blocks with one hand only and once you have chosen a bloke you cannot change it.</li><li>Repeat until the tower eventually falls. </li><li>If you cause the tower to fall your opponent wins. </li></ol>&nbsp;

Tetra Balance Game

益智

chameko小廢物電波塔

<blockquote>12/06 After many tests, I successfully found out the cause of the assembly problems reported by some users, and modified the side panel file "AMS Dry Box-SW_v2".NOTE!I Designed this model not only for ams, I also used it in the vacuum bag that holds the filament, so I needed tight tolerances to make the box strong enough. The tolerance is 0.3mm, please be sure to confirm before printing this model.</blockquote>Open the side lid and pour about 60g of silica.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_92a6870d48198.jpeg">&nbsp;There is a buckle design on the top, please make sure it is buckled correctly when installing.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_2f71bc9cf33e9.png">&nbsp;&nbsp;The front and back of the V2 version have relaxed tolerances in most areas, making it easier to install. I kept the last small area because without this part, you might get the box and slide it open like in the second picture, resulting in a mess.Please be careful not to install it in the wrong direction when installing.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_fcf2db2bab532.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_210d78c4699ec.jpeg">&nbsp;If you have trouble assembling them, try using a heavy object to knock them into the correct position.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_e0f13f6121362.jpeg">&nbsp;As for why I used this complex design, it was because I considered that he had to withstand several kilograms of impact from the filament, so I wanted to distribute the force as equally as possible to each part.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_90a605e9c843e.png"> <blockquote>Also I have a beautiful model related to AMS! Don’t miss it!</blockquote><figure class="image image_resized image-style-side" style="width:56.75%;"><a href="https://makerworld.com/zh/models/99476#profileId-106044" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-23_3d850a0169288.jpg"></a></figure>Do you always find the AMS feeder difficult to press? Are the models on the Internet very difficult to install? I have improved and carefully designed this model. Please be sure to try it!(click on the image to go to the page!)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<blockquote>----------中文解說----------</blockquote>打開側蓋後約可倒入60g的乾燥劑. 上方具有卡扣設計,安裝時請確認有正確的扣上.&nbsp;V2版本的正面與背面放開了大部分區域的公差,使其較容易安裝. 我保留了最後一小區域,因為沒有這個部分的話,你可能再拿取盒子時像第二張圖一樣滑開,導致一團糟. 安裝時請注意不要裝錯方向.&nbsp;如果你在組裝上遇到了困難,可以嘗試使用重物敲擊他們使其安裝至正確的位置. 至於為什麼使用這種複雜的設計,是因為我考慮到他必須承受數公斤來自線材的撞擊,因此我想盡可能地讓力量平均分攤到每個部分.

AMS Silica Gel Box[V2]

用具

Amao Chan

間隙測試(蝸牛) 1. 這個蝸牛是用來測試列印間隙精度的stl檔案，模型中的間隙距離包含      0.12mm/0.15mm /0.2mm/0.25mm/0.3mm/0.35mm&nbsp;2. 只要0.2mm的圓形能夠轉動就算是精度沒問題的。&nbsp;3. 影響列印的精準度的因素很多      A.線材直徑誤差或粗細不穩定。      B.機器調教問題，噴嘴磨損或平台不平整...      C.切片設定有問題。      可以內縮邊界來增加間隙，間隙調整參考下面連結 https://wiki.bambulab.com/en/software/bambu-studio/xy-hole-contour-compensation&nbsp;4. 不管蝸牛的圓能否轉動，還是可以拿來當鑰匙圈，別浪費了材料。

Gap Test Snail (間隙測試蝸牛)

amao

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_rk3rntee47nu.png"></figure><h4>Dimensions (LxWxH)</h4>132 x 150 x 32mm (100% scale)<h4>Basic information</h4>The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. The model is is split into 6 movable parts: a shell, which serves as a centerpiece, a head, and 4 fins. It prints in place, and no additional assembly is required. The base model is slightly oversized, so that all the fine details come out nicely, namely if you're printing in multicolor. If you're printing it in a single color only, and aren't bothered with loss of definition too much, feel free to downscale it to your liking. The model has been thoroughly tested, and should print fine up to 50% of the original size in single color, if you have a well calibrated, and reasonably accurate setup.<h4>Files information</h4>I've included 5 files: All of them are in the .stl format, and sorted into 2 folders. The folders are labeled Single color and Multicolor, the single color folder contains 1 file, which is a plain, 1 piece version of the model, intended for single color printing. The Multicolor folder contains 3 files for multicolor printing, each file is named after the color, which was used on the example model in the image gallery. Import them all at once into your slicer as one file with multiple parts, and it should automatically align the parts, and assign an individual color to each of them.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_vigsf58o172r.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>15%<h4>Support</h4>None. The model doesn't require any support material.<h4>Scaling</h4>Possible, but mind the accuracy of your setup. If you go too far with your scaling experiments, you might run into issues such as fused segments, or fragile links. If you have a well calibrated setup, you should be able to print the model at up to 50% of the original size without any issues, other than a definition loss.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, the contact area with the buildplate should be sufficient. However if your print surface suffers from poor adhesion, consider using an adhesive spray, or some other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be too difficult, and inconvenient to remove afterwards.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_s3a36s7dnq9a.png"></figure>This section contains a list of all updates and fixes, which were introduced to the model along the way. Each update will be thoroughly explained, so that you know, which issue was each specific update addressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_iogqewhn95rb.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_gdflo6b9cpom.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please contact me via dm, and we will talk over further details, terms and conditions, and your individual pricing plan.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_g5kaaodclbq6.png"></figure>If you like my work, and want to support it, you can buy me a coffee at <a target="_blank" href="https://www.buymeacoffee.com/jd3d" rel="nofollow noopener">https://www.buymeacoffee.com/jd3d</a> , so that I can keep my designs free for everyone.

Articulated Sea Turtle (singlecolor and multicolor)

animal

嚴嚴

今年的生肖是「龍」，祝大家於新的一年「龍有春(諧音"攏有剩")」！本立體模型「龍頭」原圖由郭姿伶老師所設計，洪新富老師指導修正，李政憲老師特地分享，本人參考該「龍頭」原圖並加入「有春」字體後重新設計繪製成可供3D列印與組裝之立體模型！共有2個元件，組裝時先將第二元件(2-DragonSpring)上半部插入第一元件(1-DragonSpring) 中間空隙並往上移至最上方，然後再將第二元件下半部放入第一元件的下方卡榫即可，因尺寸較精準，強烈建議列印時請按等比例縮放(預設元件中間空隙寬度為3mm)，且放入元件時會需要一點點技巧。本模型除了做為桌面擺飾外，亦可結合絨繩作吊掛使用喲！&nbsp;另外，亦可下載紙模圖片檔案(Dragon_Spring_paper.zip)解壓縮後用「卡紙」列印出以作為紙模使用(因作為紙模，其元件中間空隙寬度已設計成卡紙厚度不超過1mm，故不適用於一般木板或壓克力之雷射切割)。

版畫

有趣模型

裝飾

玩具

建築

益智

用具

amao

animal

暫存