mark.cameron

Buzzzz

<h2>Kitchen Cabinet Hook</h2>Here are 3 versions of my kitchen or bathroom cabinet hook. Each of them in plain colour or in 3 different patterns to match your decor or ambiance.<figure class="image image_resized" style="width:74.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/282736/2023-12-13_983b128142b96.jpg"></figure>&nbsp;Fits cabinet doors up to 20mm thick. I can upload different sizes if needed, just let me know.&nbsp;Two build plates uploaded:<ul><li>One with the 3 hooks in plain colour</li><li>One with each model with 4 different patterns. I do not recommend to print this plate as is as it would be a lot of wasted filament. Select the model and pattern you want to print and hide the other ones to minimize filament change</li></ul>&nbsp;Have a look at my other kitchen accessory, the Bagel Slicer:<figure class="image image_resized" style="width:73.67%;"><a href="https://makerworld.com/en/models/91382#profileId-97700" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/282736/2023-12-13_e3ab5b80b89fa.jpg"></a></figure><h4>Bambu Infill Coaster Set</h4><figure class="image image_resized" style="width:72.85%;"><a href="https://makerworld.com/en/models/98396#profileId-104858" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/282736/2023-12-18_f50946f858b9b8.png"></a></figure>&nbsp;&nbsp;And some other hooks I designed:<figure class="image image_resized" style="width:73.22%;"><a href="https://makerworld.com/en/models/87195#profileId-93445" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/282736/2023-12-13_ea0375361d81c8.jpg"></a></figure>

Kitchen Cabinet Hook

Kitchen

BamBam Design

<h3>Euro Coin Sorting Machine</h3>New functional update =&gt; Changelog @ bottom&nbsp;Money sorting machine for 0,01€-2€ coins.It sort automatic the 8 different € Coins for the external diameter.Simple throw the coins into the tube and lift the whole machine after all is sorted.Works like a charm!&nbsp;The Print is compatible with the USB Motor from Bambulab components kit 003 / 005 /007 / 009Its possible to turn the gear manually without attached motor as well!&nbsp;Works perfect as education toy for kids or just sort the money in your office.<ul><li>Easy Print.</li><li>Quick plug and play assembly</li><li>No screws or other tools needed, but feel free to secure! The option is there.</li></ul>Don&#39;t forget to like👍 and subscribe😉 and as always Happy Printing!&nbsp;<h4>Assembly:</h4>Before assemble check the holes are smooth, give the edges a little cut if they are to sharp.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148249/design/2024-01-20_dd6c12877025.webp"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148249/design/2024-01-20_8d55de3bd142b.webp"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148249/design/2024-01-20_211d402d3cd62.webp"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148249/design/2024-01-20_45608caa6aad.webp"></figure>Troubleshot:<ol><li>Make sure the holes where the coins fall down are not too edgy. Cut a little bit with a deburring tool if coins stuck.</li><li>Insert the coins first, than start the motor. In this way there should be no problems.</li><li>Keep in mind 50 cent has a greater diameter than 1€! Correct sorting order is 1ct/2ct/10ct/5ct/20ct/1€/50ct/2€</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148249/design/2024-02-19_2a7f3a7888ead.gif"><figcaption>1€ comes before 50cent</figcaption></figure>Change-log V1.2 (04.03.24) I gave the coins more tolerance / tuned the inlet of the tubes slightly ellipse. I hope that will help some users to get it work properly =&gt; Changes only on &#34;Base&#34; Part.V1.1 New Upgrade with additional Base with removable Tubes and some little Design changes!&nbsp;&nbsp;Disclaimer:This work by BamBam Design is licensed under Standard Digital File LicenseStrict non-commercial, personal use only license.You are not allowed to Remix or Copy this model to other 3D printing websites without my permission.&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Euro Coin Sorter - 003 Motor Compatible

TODO

JDJDJD

<h2><img src="https://makerworld.bblmw.com/makerworld/draft/693332/2023-10-20_f597d805fa3e9.gif"></h2>The TopProp is very stable and thoughtfully designed to prop your glass lid open for venting.&nbsp;Venting is recommended by Bambu Lab in many situations, for example when using PLA on the Textured PEI plate and Smooth PEI plate.&nbsp;The TopProp provides 30 inches of venting across the top of your machine.&nbsp;Featuring a stylish design with the perfect angles for supporting your glass top, TopProp also includes a handy magnetized hanger making use easy, quick and enjoyable.&nbsp;<ul><li>No Brims</li><li>No Overhangs</li><li>No Supports</li></ul><h3> </h3><h3>Magnets:</h3>Magnets can be easily pressed into place. Several magnet diameters are supported and can be up to 7mm in height.&nbsp;<ul><li>10mm diameter magnets</li><li>8mm diameter magnets</li><li>6mm diameter magnets</li></ul>&nbsp;<h3>Print Orientation Requirements:</h3><ul><li>TopProp: Side on bed</li><li>TopProp Hanger: Large flat side on bed</li></ul>&nbsp;<h3>Tips:</h3><ul><li>The side of the machine has some internal metal components that work with the magnets. The best locations on the sides are near the front and back corners (see image examples). However, if you want your TopProp even more secure you can simply use a small loop of gift wrapping tape on the backside of the hanger in conjunction with the magnets. It’s best to install the tape with the open ends of the looped tape facing up and down (vs side to side). This prevents the tape from rolling.</li><li>Magnets can be stacked up to 7mm in height for added strength.</li><li>I don't set my AMS on top of my machine, instead I use a shelf above my printer. Extra weight on top raises the center of gravity and can create a swaying effect. As such, this is designed around no AMS on top. It's also possible to print two TopProps and use them on the right and left corners - they fit there, too.</li></ul>

TopProp - Lid Lifter Vent For Glass Top

Done

FilliFuu

&nbsp;UPDATED FIX TO PRINT HEAD KOCKING MODEL, ALL FILES REPLACED AND IMPROVED (TESTED 3 SEPERATE TIMES ON 3 MACHINES SUCCESFULLY)<figure class="image image_resized" style="width:11.11%;"><img src="https://makerworld.bblmw.com/makerworld/draft/372510/2024-01-08_2531ff5638429.jpg"></figure>&nbsp;Cute Flexi Unicorn featuring new experimental articulated joints and 3d printed material for the wings - 100% 3d printed with no glue, supports or brim required.&nbsp;This beautiful unicorn design I created was inspired by the wonderful Christmas hueforge design by WagZPrintZSo thank you for your amazing inspiration and all your contributions to the site. His original artwork can be found on this link: <a target="_blank" href="https://makerworld.com/en/models/100392#profileId-107137" rel="nofollow noopener">https://makerworld.com/en/models/100392#profileId-107137</a><h4>About the print and guide:</h4>Easy to print if following the provided profiles, should all be set for you to go with just a few following recommendations…&nbsp;Firstly if printing in multiple colours silk should only be used if desired on colours two, three and four. The first colour (originally painted white by me) ideally should be regular pla or plus for the joins to remain strong, so avoid any brittle filaments such as silk or glitter.&nbsp;Second and most obvious is adhesion, for such a long print when using the ams, do everything possible to avoid failures, I myself had zero issues and failures so hopefully you too have a smooth print also.&nbsp;&nbsp;This unicorn features ball joint sockets for the wings and legs, to be clipped into place using minor force - there are leg extensions provided, however i disliked the end look and decided to not use them however they are here for you if you choose to use them.&nbsp;The articulated joint works like any other flexi toy, however like my recent uploads feature an inner socket that can be used to clip into position using force allowing the model to maintain poses and be positioned in many ways. It's purely experimental and hope people have the same success with it that i did, it's rather tough at first but eases up after a few uses.Please inform me as to how you find this new design.&nbsp;Other then whats stated above, use standard 0.42 walls, no supports or brim, I myself printed at standard 200 outer walls without an problems but follow your filaments instructions for a finer print.&nbsp;If printing the ams variant, its recommended to fill the plate with spares as it will barely increase total print time.&nbsp;And lastly I tested in various sizes and filaments and had no issues scaling the model up or down so if you want a faster print it should be no trouble to make the model slightly smaller.&nbsp;Any questions please ask and enjoy.&nbsp;

Cute Flexi Unicorn Baby

Kids

select2start Print

Gridfinity Base | Skelet | 4x4 | select2stertPrint

Gridfinity

GlennovitS 3D

You can print a boring static trophy - OR you can print this one! It’s fun, new and unique! It prints in place, and spinslike the popular Tactile Fidget Rings right of the buildplate! And that allows it to be posed in creative positions on the stand - including a more flat traditional position. Enjoy the special look on the shelf!<figure class="image image_resized image-style-side" style="width:36.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/695363/2023-12-21_df85df8e76ab18.gif"></figure><h2>Overview</h2>The medal part of the trophy comes in multiple versions. For now it comes in these versions:<ul><li>1st (first price!)</li><li>Star</li><li>Blank (you can add custom text/icons in Bambu Studio or Prusaslicer)</li></ul>(If you searched for another icon/text, and dont want to customize it yourself, please leave a comment - and ill consider adding it to the collection here)<h2>Add custom text</h2>Here is how to add custom text to the medal (in Bambu Studio):<figure class="image image-style-side image_resized" style="width:31.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/695363/2024-03-13_28a7b68cac35d.png"></figure><ol><li>Import the Blank version to the buildplate</li><li>Select the Medal</li><li>Click the Text button in top right (T)</li><li>Write the letter/word in the Input Text field</li><li>Set the Thickness to 3 mm</li><li>Click on the Medal where you want it placed</li></ol><h2>Edit custom text</h2>Here is how to edit custom text on the medal (in Bambu Studio):<ol><li>Click on the Fidget Medal with the ‘Custom’ text on</li><li>In the side-panel on the left, click on Objects (next to Process / Global)</li><li>Expand the Fidget Medal - Blank by pressing the little arrow </li><li>Right click on text_shape and press Edit text</li><li>Adjust text and size to your liking</li></ol><figure class="image image_resized image-style-side" style="width:37.48%;"><img src="https://makerworld.bblmw.com/makerworld/draft/695363/2023-12-21_c5843e56b8db38.gif"></figure><h2>Assembly</h2>None! The medal prints in place flat on the buildplate, and is ready to place on the stand - no glue needed!<h2>Print instructions</h2>As most of my models this is pretty straight forward. But here is a few tips:<ul><li>Orientation: As the model files i oriented (medal flat, stand on the bottom)</li><li>Walls/perimeters: 2 for the medal part - 3 for the base stand</li><li>Supports: No - not needed. (The medal has some bridging - printed just fine on my Bambu Lab P1S)</li><li>Colors: It can be printed in a single color, but within Bambu Studio you can print the parts you like - would love to see you creative prints!</li></ul>Happy printing!<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Fidget Medal Trophy (customize and spin!)

Random

SabreDesign

Modern and fun Easter Egg with bunny ears. Easy print and great for spring/easter decoration.&nbsp;Large egg has a big enough hole to fit a tea light, and when you used a light or transparent filament you will be able to see the light shine through the model. The large egg is 193mm tall and small egg 135.  Both models are hollow to save on filament and print profiles are set to print 1 wall with 0 infill. Modern easter egg decoration. Large egg is compatible with tealight (use light or transparent filament in this case).  If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile: <img src="https://makerworld.bblmw.com/makerworld/draft/836498/2024-03-03_6bc3f03fe3747.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836498/2024-03-03_4688742943ee.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836498/2024-03-03_d58f2e408f3c6.png">

Easter Egg with bunny ears

Easter

Aidyfid

This is the full selection of infills used by Bambu Studio to use as reference swatches.

Infill swatches 

Admin

SK07 Skipper07

In addition to being a great fan of Christmas and the 3D world, I couldn't miss this decoration on my Christmas tree.

Bambu Lab Christmas Ornament

X-MAS

Andrew

Doesn't require supports. I printed mine in PLA, but most filaments should work. I wasn't able to find a bin that I liked, so I designed my own. The bins are designed to line up with < 1mm in between to maximize the available space. As the name suggests, the 2x bin is (roughly) twice as large as the 1x bin. 2023-08-27 Update:<ul><li>Added “thin” versions of the bins. These have 1.5mm walls, compared to the 2.5mm walls of the original. The back is still 2.5mm to reduce the chance of damage when inserting and removing from the HSW. </li></ul>