Nice print, but the 4U drawer is not flush with the container because of the extra wall thickness.

The old issue with number 9 and 6 is here also. Maybe it's an idea to have a point there? Other than that a nice print which reminds me a lot of old phot slides 😄

Nice Print and a good choice to separate the feet. I scaled it to 50% because this was to big for me.

The overhang in front of the head and below the feet is not that nice and creates an open surface and needs extra support or a slower extruder feeding. Other than that it's a nice print.

I needed a rectangle to test the BambuStudio Connector function and this was perfect 😄

I really like the variety of options you can choose from to fit your personal needs. Best chute out there in my book 👍🏽

It prints very well.

I really do like the pattern.

Super zufrieden mit den Clips

I was very happy with the result in ABS. During the print of all the containers for the AMS 2 I realised that I didn't need the container for the hygrometer at all and should have printed one more of the others instead. Filing the containers was easy peasy and my AMS shows between 10%-15% humidity since then 🤩 I also printed 2 of the filament roll containers and here not everything was smooth. I really struggled to get the support out of the opening slot and I'm still not sure if I did a good job 🤷🏽 I guess next time I should use another filament for the support or tweak a bit within the gap. I inserted the and one of the little hooks already broke which is a normal thing and can happen easily because of the orientation it needs to be printed. Other than that I'm really happy and will print the curved ones next.