Manu_3d

Supergrapher

Update:18th of Jun 2024<ol><li>Just tidying up of the files and a small update for the nozzles. </li><li>The Paint-On numbered covers are kept as a seperate file</li><li>The extra nozzles are now part of the main file.</li></ol>&nbsp;12th of Jun 2024<ol><li>Tweaked the port holes so it grips the PTFE tubes better. (In case you don&#39;t know, you can use PTFE tubes instead of the printed nozzles)</li><li>Very slightly narrow the for hole for the hygrometer so it fits tighter.</li><li>Changed the style of the brackets and the fonts to match that of the Covers</li></ol>11th of Jun 2024<ol><li>Tweaked the internal geometry of the nozzles to reduce rubbing as the filament travels through it. </li><li>If you feel are you getting too much resistance or rubbing from the original Nozzles, you can try wider Nozzles. You can find the Nozzle Pack under print profiles. These nozzles comes in a choice of Original, +0.05 and +0.10. </li></ol>8th of Jun 2024<ol><li>Sliced abit off the side of the cover to make the cover easier to fit when using the top mount. I missed the measurement, it will fit, but just barely. If you are using my Clip-On Top Mount, I&#39;ve updated the file so it works now. </li><li>I&#39;ve brought back the Paint-On numbers for the cover. You can color it yourself (the stencil will appear when you use the Bambu Studio Paint function) or you can just use the one I uploaded under print profiles. <img class="image_resized" style="width: 45.16%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-09_cc8d5d3eff2808.jpg"></li><li>Small adjustments to the clips to make it snap tighter. I&#39;ve also reduced the size of the release lever incase it catches on the spool.</li></ol>&nbsp;&nbsp;Finally I&#39;ve created the ULTIMATE FILAMENT SPOOL ENCLOSURE for the AMS LITE!&nbsp;Thank you for all the support and feedback on the previous design. I’ve incorporated everything I’ve learned to create a new design that I believe is better and more user-friendly. Now, installing and feeding filament is so much easier. The cover is attached using clips, making the process more straightforward. No additional tools or parts are needed, and you have a choice of action panels and action buckets to suit your needs.&nbsp;My favorite action panel is the dual monitoring (inside/outside) hygrometer panel.&nbsp;This is also compatible with my and Bambulab&#39;s AMS lite top mount. You&#39;ll need to remove the screw on the Bambulab version.&nbsp;Installation is also relatively easy. Let’s get started!&nbsp;NOTE PLA for all partsPETG for the clips&nbsp;InstructionsConnect the buckets together as shown using the clips.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_c0d1267bb22298.jpg"></figure>Install the plugs by press-fitting them. They don&#39;t need to go in all the way; stop once they are tight. The round-based ones are for the filament to go through, while the square ones are for sealing. &nbsp;I&#39;ve also designed it so that you can use a PTFE tube if preferred. Just gently push it through the hole. I would recommend a very short tube of 2 to 4cm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_d54667eaaf1b5.jpg"></figure>Install the setup onto the AMS Lite. Connect the covers and your choice of action panel together using the clips.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_cbde24d2cc6688.jpg"></figure>Work your way around the perimeter of the hygrometer and it should pop into place in the recess. It sits flush when installed correctly. Note that the hygrometer is held in place by it&#39;s brim and not the clips.&nbsp;<a target="_blank" href="https://www.amazon.com/dp/B07GR67G1M" rel="nofollow noopener">https://www.amazon.com/dp/B07GR67G1M</a><a target="_blank" href="https://www.aliexpress.com/item/1005005582069823.html?spm=a2g0o.order_detail.order_detail_item.3.5f81f19cqwKmYb" rel="nofollow noopener">https://www.aliexpress.com/item/1005005582069823.html?spm=a2g0o.order_detail.order_detail_item.3.5f81f19cqwKmYb</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-17_60b39b7d93afc.jpg"></figure>Install your choice of Action Buckets.<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_2a590d0bc9a088.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_69b8c7c9fe3ff8.jpg"></figure>Attach the cover using the clips. You may also also install the brackets for additional stability.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_22d56660fab948.jpg"></figure>&nbsp;&nbsp;That&#39;s it, I guess the rest should be quite self explanatory.&nbsp;Have Fun!

Ultimate Filament Spool Enclosure 封箱 for AMS Lite

giaimef

This modern lamp allows you to illuminate your desks with two configurations: a frame to accommodate an LED strip or a phone holder.There are multiple adjustment points:<ul><li>Easy attachment to the desk using a clamp with adjusting screws;</li><li>Ability to rotate the entire structure by 360 degrees;</li><li>Each arm allows rotation from -50° to +50° approximately;</li><li>The LED frame adjustment arm can also rotate by 360 degrees;</li><li>Hooks are available to secure the LED power cable or the phone charger cable (max. Ø 4 mm);</li></ul>Please note, two M3 screws (length up to 8 mm) are required to screw the LED frame cover. The hole that allows the power cable to enter the frame is 4.5 mm. If you are not able to solder you can use a led strip with the connectors already prepared, but there is a risk that you will not be able to get the cable through the hole.&nbsp;Ver. 1.01: Added a new optional version of the screws that allows them to be tightened using a 24 mm spanner.Ver. 1.02: Modified clamp screw (Thanks to <a target="_blank" href="https://makerworld.com/en/u/2056232267" rel="nofollow noopener">@miao_o</a>)&nbsp;I've printed my own version using a mix of Sunlu PETG and Bambu Lab PLA Tough. This is the result:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/497406/2024-01-29_96bc852debbbb.jpg">               <img src="https://makerworld.bblmw.com/makerworld/draft/497406/2024-01-29_a9374863f7691.jpg">

mix

lampade