makerdog

michelem

<figure class="image"></figure>Ultimate Magnetic Cable Clips Holder Introducing this cutting-edge 3D model – a sleek organizational solution for your cables!&nbsp;Crafted with precision, the base features strategically placed holes for easy hanging or secure adhesive mounting.&nbsp;The accompanying cover is designed with three removable magnets and three different clips, catering to various cable sizes, from USB to HDMI.&nbsp;Experience the magic as your cables seamlessly thread through the clips, each equipped with its own magnet. Watch as they effortlessly snap into place on the base, creating a clutter-free and visually pleasing setup.&nbsp;Say goodbye to cable chaos and embrace the future of organized simplicity!&nbsp;Print&nbsp;No support neededWe recommend a minimum resolution of 0.16mm&nbsp;CLIPS SHOULD BE PRINTED IN TPU&nbsp;For the Cover there are two version one with colored circles that requires AMS and one single color to be used with any printer.&nbsp;BOM (Bill of Materials)<ul><li>6 magnets of 12x2mm</li><li>Double-sided adhesive or screws for mounting</li></ul>Assembly&nbsp;Take the cover and place it face down, insert 3 magnets of 12mm in diameter (max 4mm thickness), no need for glue!&nbsp;Now take the base and insert the cover over it until everything is in position.&nbsp;Finally, take the clips and slide a 12x2mm magnet into the designated slot. Again, no need for glue, and you can easily retrieve the magnets in the future.&nbsp;Finally, use a bit of double-sided adhesive under the base to secure everything where you prefer. If you want (and before inserting the cover), there are 2 convenient screw holes to fix it wherever you want!&nbsp;And that&#39;s it.&nbsp;Update 22 Jan 2024<ul><li>Now available with 3 or 5 clips</li><li>Added table mount</li></ul>Update 08 Feb 2024<ul><li>Added 10mm magnets version</li></ul>

Ultimate Magnetic Cable Clips Holder

wall mount

Michele MM3D

&nbsp; frame for130 x 130 mm Hueforge picture, can also be enlarged or reduced using slicing software to fit other images if desire.For a better finish, I recommend printing it rotated and with supports&nbsp;&nbsp;

Frame for 130x130mm hueforge print

HueForge

topxnbo

This is my take on the cup holder trash bin for cars.&nbsp;I designed it specifically for my Mini Cooper SE, with a mini logo of course, but given it&#39;s such a small car, i would imagine it should fit most other car&#39;s cup holders. I have also included a lid with a Bambu logo (shown as the cover picture), and a plain lid with no logo if you want to add your own.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/863667/2024-04-15_3e2152906f9a1.gif">I took inspiration from an amazon listing that I liked (I&#39;m sure you can find the same design on AliExpress, Temu etc. and it&#39;s likely from the exact same manufacturer lol).&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/863667/2024-04-15_f8cecd21c55fe.png">however, in order to achieve the tilted top, and keep the lid self closing, i would have to incorporate a spring mechanism of some sort, which seemed overly complicated, so I ended up with a flat design, but still able to make the lid self closing, and here&#39;s how.&nbsp;I basically used Bambu&#39;s studio&#39;s “cut” function, and created three pieces of the lid. the while portion is necessary to retain the integrity of the top (showing) surface, otherwise, you&#39;ll see a line in the middle. then the green / black pieces are separated so I can use different infill %, resulting one side of the lid being heavier than the other, ultimately achieving the self closing mechanism.&nbsp;if you intend to use the plain lid and add your own logo, make sure you follow these steps to achieve the self-closing effect (or please share if you have a better way to achieve different % of infill on the same model)&nbsp;<ol><li>remember the X Y Z position of your model. this is important because every time Bambu Studio cuts your model, it likes to move them apart, but for this exercise, you need to bring them back together.</li><li>cut 0.4mm from the build surface, and bring them back together. I used 0.4mm because my logo design is 0.4mm deep. choose whatever depth you engraved your logo, and that should solve the showing surface.</li><li>cut the remaining piece in the middle through the pivoting axis. I moved the cutting surface to 1mm to one side to make sure the pivoting axles are 100% infill. again remember to bring them back together</li><li>for some reason, you need to assemble all the cut pieced, and move the green/black pieces 0.4mm above build plate. if you don&#39;t assembly them, they will remain “stuck” on build plate.</li><li>once you&#39;ve done all the cut and positioning, you can set green piece to 100% infill, and the black piece to 15% or whatever low % you want, doesn&#39;t really matter. the white part is just two layers, so doesn&#39;t matter the infill. then you should be able to achieve the self closing effect.</li></ol><figure class="image image_resized" style="width:77.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863667/2024-04-15_5080db516de0b.png"></figure>

Self Closing Cup Holder Trash Bin

o.0jack

A small tool for cleaning the machine.After printing, please use scissors to cut the bristles neatly.PLA bristles will be harder, while PETG bristles will be softer.&nbsp;Bamb cleaning tool set&nbsp;Bambu A1 / A1 mini Linear Rail Cleaner and Greaser / lube helper<a target="_blank" href="https://makerworld.com/zh/models/109780#profileId-117277" rel="nofollow noopener">https://makerworld.com/zh/models/109780#profileId-117277</a>&nbsp;Bambu Sponge / nonwoven fabriclube lube helper<a target="_blank" href="https://makerworld.com/zh/models/110342#profileId-117940" rel="nofollow noopener">https://makerworld.com/zh/models/110342#profileId-117940</a>&nbsp;Bambu Brush<a target="_blank" href="https://makerworld.com/zh/models/112481#profileId-120452" rel="nofollow noopener">https://makerworld.com/zh/models/112481#profileId-120452</a>&nbsp;

Bambu Brush

SchulteGeileTechnik

The Planter is designed to be printed with a 0.4 nozzle (and the same line width). That way the blades of the spiral will always be four lines wide and the printer can follow a continuous path (for this to work choose a wall thickness of at least two wall lines). By default the flower pot has a height of 80mm and a maximum (outer) diameter of around 85.5mm. As seen in photos I also printed a small (~65mm high) and big (~95mm high) version, by just scaling the planter in the slicer.There is a version with a closed bottom and one with drainage holes in the bottom for the excess water to escape. If you want to, you can print the small plate that I provided to catch any water flowing out of there. &nbsp;If you like the design, I would be flattered to receive a little tip via PayPal: https://www.paypal.com/paypalme/geldanmaxPlease note, that it is not designed to be printed in vase mode. If you want to, you can still try it, but it may not be watertight. Since I am often asked about the blue filament in the photos, it is called "ERYONE Matte PLA" in navy blue.&nbsp;Please keep in mind that this design is published under a NON COMMERCIAL license, so please do not sell the design or prints made with this design.

Modern spiral planter

Design

JDJDJD

<h2>Meet the Smoothy!</h2>The Smoothy is a PTFE Bowden Tube Y Connector designed for smooth filament transport without catching or binding. This allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;PTFE tubes are inserted deep into the connector for less wear on the FDM material. This allows for silky smooth operation.&nbsp;As the filament progresses towards the output, it passes through a precisely-designed taper that mates perfectly with the output bowden tube.&nbsp;All PTFE tubes must be inserted until each “stop” is reached (see cutaway diagram).&nbsp;Connectors must be the black type (not blue). The black connectors allow the PTFE tube to “pass thru” which is required for the design to work smoothly: <a target="_blank" href="https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1</a>&nbsp;<h2>BENEFITS:</h2><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Optimized Geometry</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Supports both PC4-M6 and PC4-M10 “pass thru“ connectors</li><li>Free to Download!</li></ul><h2>UPDATES:</h2><ul><li>The Smoothy Mount is now available! Download here: <a target="_blank" href="https://makerworld.com/en/models/18190" rel="nofollow noopener">https://makerworld.com/en/models/18190</a> The mount is not required, but available to those who prefer to attach the Smoothy to their machines. Without the mount, it can simply rest in-line.</li><li>Both PC4-M6 and PC4-M10 connectors are now supported.</li></ul><h2>TIPS:</h2><ul><li>Make sure ALL bowden tubes are FULLY inserted until each one reaches its stop point. See cutaway diagram for an illustration.</li><li>The output tube does not insert as deep as the input tubes.</li><li>After inserting each tube, you can rotate the tubes back and forth while pressing inward slightly to make sure they&#39;re seated squarely and fully.</li><li>Glue Stick is recommended.</li><li>PTFE tubes must be cut squarely at the tip (no angled tips).</li><li>All PC4 connectors must be installed for a completed design with smooth operation.</li><li>Tested with a 0.4mm Nozzle and 0.2mm Layer Height.</li><li>Print vertically with wide dual-port side on the bed.</li><li>PC4 connectors typically have tapered threads. As such, make sure you don&#39;t over-tighten them as they can create a “wedge effect” and can cause damage.</li></ul><h2>NOTES:</h2><ul><li>These work well printed in PLA. More durable materials can be used, but it may require clearance adjustments.</li><li>I’m currently using this for my Bambu Lab X1C with an AMS, which utilizes an external spool.</li><li>This is the first model that I&#39;m sharing, I hope you enjoy it!</li><li>The Smoothy can be used commercially, but can&#39;t be resold.</li></ul>

wall mount

HueForge

Car

a1

Design

Bambu