mail2andreas.schneider

jogu44

Top glass riser, built to live with the handle so you never lose it. &nbsp;3D Print The World. For the people by the people. Allowable for remixes.

Glass Top Riser - print in hinge 

usefull

limepod

I wasn&#39;t satisfied with the classic “Yet Another Infinity Cube” or any of the other similar models, so I made my own. This one has hinges based on YAFICv2, but with more forgiving tolerances and cutouts to prevent the top hinges from sticking.&nbsp;Recommended print settings:Split to parts, select each of the hinges, and give them extra walls and infill for strength.&nbsp;Update b6.0:Several iterations and tweaked tolerances later, this version should both turn better and print more easily.&nbsp;Changing the layer height or the first layer height can change how the bottom of the upper horizontal hinge prints. Best results seem to be as pictured, with 0.2mm for all layers.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000448441/design/2024-04-30_d2c68ba98fdf08.png">&nbsp;The slicer will warn you that there are floating regions, that&#39;s fine:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000448441/design/2024-04-29_2d6b6ae8a8cfd8.png">The sections of the hinges that touch the bed are small, take care they don&#39;t detach: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000448441/design/2024-04-29_33efd07df0dc48.png">

Infinity Cube - angled hinges

zu verkaufen- namensnennung

Ariox3D

<h4>PHONE FOLDABLE HOLDER I wanted a phone holder that I could always carry with me and I took as a reference the one I had been using for a long time and that I bought on Aliexpress (photos attached), I know there are some very similar ones to download but I wanted to make my own and I hope you like it.</h4> <h4>PRINTING Just print and use, I ran the tests with PLA and PETG at 0.16 layer height, 3 walls and 20% gyroid. once printed, please be very careful when opening the two parts, I adjusted the hinge as much as possible to barely have any slack.</h4> <h2>-Ariox3D-</h2>

Phone Foldable Holder

März 24

tsubus

Description from original <a target="_blank" href="https://www.printables.com/@keenzkustoms_94722" rel="nofollow noopener">author</a>:&nbsp;Max flow test for bambulab slicerWARNING speeds at the top of the tower set up to 476mms (slower then bambu x1c normal travel speed) so use at your own risk but you have normally stopped the print well before this. if you change it to 0.3 layer height, it won't need to print as fast but calculations will require the slicer to check.the tower increases perimeter print speed by 14mms every 1mm of z height causing an increase of 1mm3 of flow starting from 11mm3 for the first 1mm<figure class="image"><img src="https://media.printables.com/media/prints/318350/rich_content/a4929750-0bc9-4791-a7ec-bd8a49bc3d05/thumbs/cover/800x507/png/screenshot-2022-11-16-154527.webp"></figure>How to set it upsetup for x1c generic abs 0.4mm nozzle (change to match your printer and nozzle)set what filament you would like to print in and adjust max volumetric to something high like 50mm3 and turn off slow printer down for better layer cooling in the cooling tab<figure class="image"><img src="https://media.printables.com/media/prints/318350/rich_content/e910c7da-a501-4136-adc9-485d65d434f9/thumbs/cover/800x712/png/screenshot-2022-11-16-155353.webp"></figure>slice and print to model and stop the print when you see it starting to undextrude or have inconsistencies in the layers.mesure from the bottom to where the last layer that looks perfect.<figure class="image"><img src="https://media.printables.com/media/prints/318350/rich_content/b268665e-6b6c-41c9-9ebc-9a2ac1e7acb6/thumbs/cover/800x1067/jpg/20221116_153614.webp"></figure>the measurement in mm + 10 is what your max volumetric flow isso for my test Esun ABS+ @270c is 19mm + 10 = 29mm3 max flowset it slightly lower then this by about 10% in your filament settings for safetyyou can also check this in the slicer by going to that layer in the preview tab and setting view to flow and will show you the value at the bottom.<figure class="image"><img src="https://media.printables.com/media/prints/318350/rich_content/7eeff3e4-a714-4059-b8d2-4779bf751e6a/thumbs/cover/800x653/png/screenshot-2022-11-16-153926.webp"></figure>you can also use the seam to check where flow and acceleration is becoming an issue<img src="https://media.printables.com/media/prints/318350/rich_content/e5b703bd-d5e1-4126-9281-38f16801ac94/thumbs/cover/800x1067/jpg/20221116_153640.webp">

Bambu slicer max flow test tower

Test

maksim

Sevro

OverviewA couple embracing in heart frameAn ethereal and light statue that shows love in artish style.&nbsp;This is my 3d print adaptation of the drawing by ngupakarti from pngtree.com&nbsp;InstructionTo print it good there is need good adhesion to bed.Base is quite small and due to this the model demand a some care to make it standing. However my goal was to make as small stand as possible.&nbsp;Update:21.12.2023I changed stand base so it's look better.In print profile I changed layer height from 0.2 mm to 0.28 mm. I added also MMU colored version.&nbsp;Have fun

Heart Couple - Ethereal Statuette

Anna

SavageLau

&nbsp;This simple tool is fast to print, and cost very little filaments, 1.95g each.This tool will help you lube on the z and y axis (lead screw and linear rod).Extended length handle will help you easy to reach center one that within the cover.You can control the angle to push how much lube apply to the screw.<figure class="image image_resized" style="width:78.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_10731b083ab3.gif"></figure>&nbsp;<h3>Leadscrew:</h3><figure class="image image_resized" style="width:77.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_047b690a0cf77.jpg"></figure><figure class="image image_resized" style="width:77%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_0136c09e64bc8.jpg"></figure><h3>Linear rods:</h3><figure class="image image_resized" style="width:76.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_25301222a7901.jpg"></figure><figure class="image image_resized" style="width:76.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_6dbff3848e74c.jpg"></figure>

usefull

zu verkaufen- namensnennung

März 24

Test

maksim

Anna

drucken