magveth

NoycePrints

Meet Dum-E, the handy desk helper industrial robot. I designed it with purpose in mind as it can function as a phone stand, webcam mount (logitech c920) and a business card holder. It doesn&#39;t end there though, as I aim to develop this platform with further attachments in future. These may be recommended from others and/ or what I think might be useful. I hope you find it useful and please feel free to comment any recommendations for attachments you would like to see in future. I look forward to seeing your different uses/ prints and colour schemes. Thank you for your continued support :)&nbsp;To keep files from getting complicated, I have only included the phone stand attachment in this upload. I have placed optional attachments in a sperate upload available on my profile titled “Dum-E optional attachments”. This will be periodically updated with new wrist attachments I think may be of use or other people suggest. Printing helper<figure class="table"><table><tbody><tr><td>Part</td><td>Quantity</td><td>Infill</td><td>Supports required</td></tr><tr><td>Arm 1</td><td>1</td><td>25%</td><td>YES</td></tr><tr><td>Arm 2</td><td>1</td><td>25%</td><td>NO</td></tr><tr><td>Shoulder Joint</td><td>1</td><td>30%</td><td>YES</td></tr><tr><td>Wrist to attachment connector</td><td>1</td><td>40%+</td><td>YES</td></tr><tr><td>Turntable</td><td>1</td><td>20%</td><td>NO</td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td>Part</td><td>Quantity</td><td>Infill</td><td>Supports required</td></tr><tr><td>Base</td><td>1</td><td>20%</td><td>NO</td></tr><tr><td>Feet</td><td>1</td><td>20%</td><td>NO</td></tr><tr><td>XL motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Large motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Medium motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Small motor</td><td>1</td><td>15%</td><td>NO</td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td>Part</td><td>QTY</td><td>Infill</td><td>Supports required</td></tr><tr><td>Phone stand backing</td><td>1</td><td>25%</td><td>NO</td></tr><tr><td>Phone stand bottom</td><td>1</td><td>25%</td><td>NO</td></tr></tbody></table></figure>Required for assembly Superglue for fake motor attachment and Nitrile cord.1mm nitrile rubber cord, 16cm should be enough for 1 complete arm. This is only required between joints if you intend on supporting the weight of a phone etc. Alternatively, if you have TPU filament you can use Fat Tony&#39;s handy TPU O-rings. They&#39;re a quick print and don&#39;t require superglue to fit. You can get them here: <a target="_blank" href="https://makerworld.com/en/models/205832#profileId-225948" rel="nofollow noopener">https://makerworld.com/en/models/205832#profileId-225948</a> Thanks again for the great alternative Tony!&nbsp;As an optional extra, I&#39;d recommend using 4x 3M 6mm Anti-slip sticky back rubber feet. They fit in recessed circles in the corners of the feet.&nbsp; Screws: A total of 13 are required for the arm plus 3 for the phone stand, listed below.M3x10mm - QTY 12 - available on the store, linked below.M3x15mm - QTY 3M5x30mm - QTY 1Foot: 4x M3x10mm countersunk.Base: 1x M3x15mm countersunk.Shoulder joint to Arm 2 rotation point: 1x M5x30mm countersunk.Turntable: 4x M3x10mm countersunk.Rotation point between Arm 1 and Arm 2: 1x M3x15mm countersunk.Arm 1 to wrist connector rotation point: 1x M3x15mm countersunk.Coupling attachment to wrist: 1x M3x10mm countersunk.3 M3x10mm screws are required for the Phone stand. Assembly tipsCut 3 lengths of Nitrile cord, 74, 55 and 30mm in length. Glue one side of each and cure into individual circles. These will be glued on one side between the 3 separate joints on the arm. Doing this will vastly improve the holding capacity of the arm as it will provide more friction between the joints, helping to prevent them from sagging under weight.The 74mm circle goes between the elbow joint and arm 2.The 55mm circle goes between the arm 1 and 2 joint.The 30mm circle goes between the arm 1 and wrist attachment connector.I have added 3 pictures as a guide at the end of the gallery.

Dum-E the handy desk buddy. Lamp, stand, holder 

tools

Print3DZ

Upgrade your Tesla Model 3/Y with this backlit modular center console organizer tray. Designed to enhance both functionality and aesthetics, this organizer integrates seamlessly with your vehicle, offering personalized organization and aesthetics. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000157141/design/2024-02-02_12ea2bd476fb.gif"> Update: Added the STLs for a version that is 10mm longer, if the current version is a bit too small for you. The only downside of this version is the single wall is easier to accidentally slot in wrong. Other than that it works well! Features Overview<ul><li>Ambient Backlit Design: The tray is designed to utilize the existing light within the center console, featuring a clear back section to allow for illumination, for enhanced visibility and aesthetic appeal.  </li><li>Modularity &amp; Color Customization: The organizer tray includes various inserts that can be positioned anywhere within the tray to customize compartment sizes and arrangements. Allowing for both functional, and aesthetic color customization.  </li><li>2 Tray Options: Select from a tray featuring a J1772 adapter hole or opt for a streamlined, flat tray design.  </li><li>Sliding Mechanism: The tray is designed to slide within the center console&#39;s grooves, allowing for easy access to both the tray and the storage area beneath it.   </li><li>Aesthetic Design Elements: The tray features grooves that not only secure the inserts but also create a textured, visually appealing effect.   </li></ul>Organizer Inserts Single wall divider insert:<ul><li>The divider wall offers unparalleled flexibility, allowing placement anywhere within the tray—even snugly against the edge, blending in seamlessly when not in use. This versatility means the divider can function as both a practical compartment separator and an aesthetic element, by printing the divider in a contrasting color to add personalized customization without the printing waist!</li></ul> Multi wall inserts, with two design types each:<ul><li>With a floor: which can be useful for color customization or to cover the J1772 hole if it&#39;s not in use.  </li><li>Without a floor: utilizing the tray&#39;s base as the bottom surface, ideal for lighter customization needs or to accommodate the J1772 adapter hole.  </li></ul><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000157141/design/2024-02-02_90abd931c290a.gif"></figure> Tray 3-D printing considerations:<ul><li>The tray is designed for vertical printing, this streamlines the process by requiring just a single color change and eliminating the need for support structures.   </li><li>All multicolor inserts only need a single color change.  </li><li>I used PLA-CF for all the colors, except for clear PLA for the backlight.</li></ul> Please let me know if you have any questions, and feel free to create your own modules to put inside the tray for even further customization! 😊 If you like my work, you can buy me a coffee here: https://www.paypal.com/paypalme/zowou

Tesla Model 3/Y Modular Backlit Center ConsoleTray

to share

geoff.pedder

uses 2 10x3mm magnets that press fit into the rear. Mounting screws required are m2.5

Raspberry Pi Zero W magnetic mount

cases

Kardes.Design

Update: <a target="_blank" href="https://makerworld.com/en/models/180414#profileId-198522" rel="nofollow noopener">Valentine&#39;s day canvases </a>releasedUpdate: 24/05/2024 <a target="_blank" href="https://makerworld.com/en/models/472969#profileId-382903" rel="nofollow noopener">A1 Mini compatible version</a> is ready!&nbsp;The Zhulong Lamp is a decorative and festive lamp designed to celebrate the Chinese Year of the Dragon. Featuring multiple canvas designs inspired by Chinese dragon motifs, this lamp uses the <a target="_blank" href="http://shrsl.com/4k36v" rel="nofollow noopener">Bambu Lab LED strip</a> to illuminate the canvas, adding a warm and inviting glow to any space. Even without the LED light, the lamp&#39;s beautiful design makes it a great addition to your home decor.&nbsp;I&#39;m constantly developing new designs that will help you transform your lamp to suit different styles and themesFilaments used:<ul><li><a target="_blank" href="http://shrsl.com/4k369" rel="nofollow noopener">PLA matte Latte brown</a></li><li><a target="_blank" href="http://shrsl.com/4k36p" rel="nofollow noopener">PLA matte Dark brown</a></li><li><a target="_blank" href="http://shrsl.com/4k36a" rel="nofollow noopener">PLA matte Ivory white</a></li><li><a target="_blank" href="http://shrsl.com/4k36d" rel="nofollow noopener">PLA matte Scarlet red</a></li><li><a target="_blank" href="http://shrsl.com/4k36h" rel="nofollow noopener">PLA sparkle Onyx black</a></li><li><a target="_blank" href="https://shrsl.com/4k36k" rel="nofollow noopener">PLA sparkle Crimson red</a></li></ul>&nbsp;&nbsp;&nbsp;Print instructions:3MF files with the correct settings are available to use.Main structure parts:1: Base2: Lid3: Diffuser4: LED channel5: Screws6: Cable plug&nbsp;I tested and printed all parts using only 2 plates to have a complete lamp structure.I added a 4 plate option incase you are not sure about your bed adhesion or if your printer is not on a stable surface.&nbsp;Canvases:I recommend using the Textured PEI Build plate.&nbsp;Please wait untill the build plate has cooled down before attempting to remove the canvas.Changing the colors of the canvases is extremely simple and can be done directly from Bambu Studio or Bambu Handy using my custom print profile. The AMS is required for multi color versions.&nbsp;Please note that only the Year of the Dragon canvases are available on MakerWorld. For more exclusive canvases, stay tuned for an upcoming <a target="_blank" href="https://patreon.com/user?u=103482126&amp;utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=creatorshare_creator&amp;utm_content=join_link" rel="nofollow noopener">Patreon</a> release next week.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_04d25008e0897.jpg">&nbsp;&nbsp;Assembly:Assembly video on YouTube. Use browser to view it.<figure class="media"><oembed url="https://www.youtube.com/watch?v=JQtZwTMUK_0"></oembed></figure>All parts thread together. No glue or extra hardware needed!Start with tightly sticking the LED strip around the LED channel. Make sure to lead the USB connection to the bottom (Thread side)&nbsp;<figure class="image image_resized" style="width: 41.4%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_50bafad32b82d.jpg"></figure>&nbsp;Installing the Canvas on the Main Structure:<ul><li>Using both hands, bend the canvas and position it into the base, aligning the screw holes.</li><li>Make sure the black, thicker edge is facing outward.</li><li>While keeping one hand holding the canvas in place, use your other hand to secure the bottom screw. After that, the remaining screws can be easily screwed in. Do not overtighten the screws they can break</li></ul>This is most challenging part of assembly . However, with a bit of patience, anyone can complete this step. If you encounter any difficulties during assembly, please don&#39;t hesitate to reach out to me for assistance.Please follow the pictures below for the rest. Its pretty straight forward. Let me know if you have any questions.<figure class="table" style="width: 92.4%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_cb486c91faa0b.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_9ec9f18eabcf2.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_027692ff3740e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_5b2237f2f91a7.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_12d0a30353ed4.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_56872fd2abd8f.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_0a43df515b0bc.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_df5e13f632d23.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_3c59a327ae831.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_e1b3f5ce47796.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_79be6ee1e9103.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000147383/design/2024-01-19_aac3ab35ef69b.jpg"></figure></td></tr></tbody></table></figure>&nbsp;Commercial use license: <a target="_blank" href="https://www.patreon.com/user?u=103482126" rel="nofollow noopener">Patreon</a>&nbsp;Hi, I&#39;m a student and love creating functional and beautiful designs optimized for 3D printing.if you like my work consider supporting me with these options:<ul><li><a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=6VL4LD2NAJJ86" rel="nofollow noopener">Paypal</a></li><li><a target="_blank" href="https://www.buymeacoffee.com/KardesDesign" rel="nofollow noopener">Buymeacoffee</a></li></ul>&nbsp;&nbsp;

tools

to share

cases

thing ideas