madebyaadil

Murphyte

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459305/design/2024-05-10_98327885ee295.gif"></figure>更新：修改了平台5的两个构件“凛支撑2”（请看第五盘的两个柱子“凛支撑”、“凛支撑2”是否一样，如果一样请重新下载文件，如果打印出来了也可以保留柱子，下一个亭子也会有一样的结构，如果对你造成了困扰，对此我表示很抱歉）打印建议：1.屋面使用0.16的层高，在调整缩放的时候需要在x处多加2%2.不建议打印太小，理想比例是70%，可发大到90%3.所有构件都可以使用0.4的喷嘴打出，如果你追求高质量可以使用0.2的喷嘴打印某个构件，如屋面4.stl是100%的文件请自行选择合适的大小缩放5.由于某些原因，如果遇到孔洞太小的问题请调整xy补偿6.导入stl时提示“是否要转换成毫米要点是”详细解释请看此视频Detailed：<figure class="media"><oembed url="https://www.bilibili.com/video/BV1kH4y1G7fj/?share_source=copy_web&amp;vd_source=cb4693ae1b7ed829bc12841b8c217e9f"></oembed></figure>update：Modified two members of Platform 5 &#34;凛支撑2&#34;（Please see if the two pillars of the fifth disc &#34;凛支撑&#34; and &#34;凛支撑 2&#34; are the same, if they are the same, please re-download the file, if you print it out, you can keep the columns, and the next pavilion will also have the same structure, if it bothers you, I apologize for this）Printing Suggestions:1. Use a floor height of 0.16 for the roof, and you need to add 2% more at x when adjusting the scale2. It is not recommended to print too small, the ideal ratio is 70%, and the size can be as large as 90%3. All components can be printed with 0.4 nozzles, if you pursue high quality, you can use 0.2 nozzles to print a certain component, such as roofing4. STL is 100% file, please choose the appropriate size to zoom5. Due to some reasons, if you encounter the problem that the hole is too small, please adjust the XY compensation6. When importing STL, it prompts &#34;Do you want to convert to millimeters&#34;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459305/design/2024-05-10_190b7a3fddde8.gif"></figure>安装动画：Install animations：<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459305/design/2024-05-10_259cedf4dbfbe.gif"></figure>

Ancient pavilions 小亭子

Building Models

w3r3wolv3s

The Captain America shield as a dimensional mosaic wall hanging. Four and five color versions included.&nbsp;I printed this with Polymaker PLA Pro Metallic and Polymaker Silk.&nbsp;Note: I wanted them as big as possible, so yes they print over the initial filament trace. It won&#39;t hurt anything, but you can always scale yours down a little and reposition.

Marvel Captain America Dimensional Mosaic

Layered Art

wuguigui

Updated 20240520Someone asked for the extra height of the lamp, so I added a part called&#34;Icosahedron-Pole Extra height&#34;, you can choose to add 1, 2, or 3… of these parts, but be careful of the strength and the center of gravity. The print profile was added as well.__________________________________________________________________________________________________________________________&nbsp;Updated 20240407After using the lamp for some time, I found the Pole parts started to incline, the bottom of the pole was too weak to hold the weight of the lamp, so I modified the shape of the pole&#39;s bottom&amp;leg parts as the image shows, shorten the hanger part, now this issue should be fixed.The parts&#34; Icosahedron-Hanger&#34;, &#34;Icosahedron-Pole Bottom&#34;, &#34;Icosahedron-Pole Leg01&#34;, and &#34;Icosahedron-Pole Leg02&#34;  were replaced in this upgrade, and these parts in the print profiles were replaced as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-04-07_57daeaf83d776.png"></figure>__________________________________________________________________________________________________________________________&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the hardware kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;This is an Icosahedron lamp designed for <a target="_blank" href="https://shrsl.com/4cxd4" rel="nofollow noopener">Bambu Lab LED Lamp Kit 001</a> , I designed a pole hanger to hold it, so you can put it beside your computer or bedside as a night lamp.It can be built in 3 types, you can also try to make a different lamp for yourself.Hardware Kit: <a target="_blank" href="https://shrsl.com/4cxd4" rel="nofollow noopener">LED Lamp Kit 001</a>Recommended filaments: <a target="_blank" href="https://shareasale.com/r.cfm?b=2282157&amp;u=4048186&amp;m=138211&amp;urllink=store%2Ebambulab%2Ecom%2Fproducts%2Fpla%2Dtough&amp;afftrack=" rel="nofollow noopener">Bambu PLA Tough</a>, <a target="_blank" href="https://shrsl.com/4duvh" rel="nofollow noopener">Bambu PLA-CF</a>, or other <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4048186&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Bambu Filaments</a>The models can be separated in Bambu Studio, so you can make the shell and the back side in 2 colors. Because the white shell version is easy to leak the back color, so I made different parts for the white shell. You can download the parts name with &#34;White shell&#34;, If you want to print a white shell lamp. All parts can be printed without supports, the pole parts need a raft to make them stable on the board.这是一盏可使用拓竹LED模组的正二十面体吊灯，可自由组合拼接，正反面双色打印。白色款由于容易透出背部的颜色，专门做了与黑色款不同的模型，请选择文件名带有”White Shell&#34;的模型打印。所有部件可无支撑打印，灯杆打印时底部需加至少两层衬垫（Raft)，建议模型与衬垫距离设为0，以保证稳固，打印后切除底部残余衬垫即可。安装说明见以下图片，其他详情见<a target="_blank" href="https://www.bilibili.com/video/BV1rC4y167s8/?spm_id_from=333.999.0.0&amp;vd_source=ddcaa334bf40e5b233718d3c3f743c02" rel="nofollow noopener">B站视频</a>Watch the video to get more information.&nbsp;Assembly instructions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_369dcb1e0eea4.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_6bca9810c5931.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_a6097df6bc009.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_a2772edf695be.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_668d16c5e68ff.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_031c1a8499649.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_2e88e08ac77a4.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_05fe0c50d5c13.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_b175560990aa4.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_c82d75e94cf9f.jpg"></figure>Click &#34;Like&#34; if you like it, feel free to boost me or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&amp;locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a>, thank you! Have fun!If you want to sell the printed model, you need a Commercial license at: <a target="_blank" href="https://www.patreon.com/wuguigui/membership" rel="nofollow noopener">https://www.patreon.com/wuguigui/membership</a>&nbsp;

Icosahedron Lamp for LED Lamp Kit 001

Light Boxes

OVERTURE Filament

Designed for peak performance and maximum style, these V-shaped snow plows will clear the toughest of walkways. Each plow (R &amp; L) features a directional tab that&#39;ll snap into the front ventilation holes of your Crocs. We recommend swapping colors for a two-tone design, or printing in any vibrant color you like! We used Overture <a target="_blank" href="https://www.amazon.com/OVERTURE-Filament-Printer-Dimensional-Accuracy/dp/B089S2QDHD/ref=sr_1_5?qid=1704855800&amp;sr=8-5&amp;srs=20724929011" rel="nofollow noopener">matte yellow and matte black</a>&nbsp;Easy print, standard PLA with standard or tree supports👍🏻&nbsp;BONUS TIP: Fill your pockets with road salt and spread liberally to stop further ice.

Snow V-Plow for Crocs

Meme

altair3d

DesignI needed something to show pricing at the craft fairs I've been attending. I thought it only appropriate that those price tags be printed (just like the rest of my products). They're simple, but very effective. The magnetic tags take 8x2mm magnets and may require a touch of super glue to keep them in.&nbsp;ChatGPT DescriptionThe 3D printed Craft Fair Price Kit is a compact, customizable tool designed to streamline pricing and inventory management for artisans at craft fairs. Crafted with durable, eco-friendly PLA filament, this kit includes an assortment of labeled price tags, numerical placeholders, and product category markers. The kit's sleek, minimalist aesthetic seamlessly integrates with diverse craft displays, offering a professional and organized approach to showcasing handmade goods while simplifying the pricing process for both vendors and customers.&nbsp;&nbsp;

Craft Fair Price Kit

Useful Items

im.jackharvest

To see more video game themed items I've made, <a target="_blank" href="https://makerworld.com/en/u/491970848/collections/461438" rel="nofollow noopener">check out my collection</a>.-----------------------------------&nbsp;This turned out better than I'd imagined.&nbsp;The AMS was loaded with BLACK, WHITE, YELLOW AND RED.&nbsp;The profile will help, since the color changes on X layers are pre-loaded.Print with 0.08 layer height, and 0.16 initial layer.&nbsp;First Black. Then Reds. Then Yellow, Then finally white. ←- Layer order.&nbsp;Bring on the year of the dragon, 2024!&nbsp;<figure class="image image_resized" style="width:61.85%;"><img src="https://makerworld.bblmw.com/makerworld/draft/445603/2024-01-08_1fff4174bae68.jpg"></figure>

The Legend of Zelda: Year of the Dragon | Wall Art

Hueforge/Art

Kalcemo

Overlay for the Azul : Master Chocolatier board game. I could not find an overlay that fit the slightly different location of the chits.&nbsp;The pictures are printed with Polyterra Earth Brown: <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351577145" rel="nofollow noopener">https://us.polymaker.com/products/polyterra-pla?variant=39574351577145</a>&nbsp;If you find an even more “chocolatey” color, please upload a make and share!&nbsp;WARNING! when printing you will need to grab the first calibration line off the build plate near the front of the plate. The model uses almost the entire build plate. Leaving the calibration line can impact the first layer appearance!

Azul Master Chocolatier overlay

Board Games

Brent Peterson

<h2>Toroidal Launcher</h2>This is an original design created for the <a target="_blank" href="https://makerworld.com/en/contests/5" rel="nofollow noopener">Flying Objects design contest</a> and features a handheld three-stage planetary gearbox that launches a toroidal ring over 3000 RPM! The design is 100% 3D printed; all pieces press fit together and no additional hardware is required.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-15_92eaaa9691a14.gif"></figure>The gearbox used in this design is modular and will be released as it's own series soon™, if you have any thoughts or feedback please share so I can continue to improve the design!<h3>Modifications and Add-on Designs</h3><ul><li>[NEW!] Remix Templates<ul><li><a target="_blank" href="https://makerworld.com/en/models/123219" rel="nofollow noopener">Threaded cap</a></li><li><a target="_blank" href="https://makerworld.com/en/models/125073" rel="nofollow noopener">Hexagon gear driver</a></li></ul></li><li>Gearbox modifications<ul><li><a target="_blank" href="https://makerworld.com/en/models/99992#profileId-106623" rel="nofollow noopener">High torque conversion kit (1:2 ratio)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105586" rel="nofollow noopener">1:3 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/108803" rel="nofollow noopener">1:4 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105590" rel="nofollow noopener">1:5.5 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/110188" rel="nofollow noopener">1:7 ratio gearset</a></li></ul></li><li>Toroidal ring designs<ul><li><a target="_blank" href="https://makerworld.com/en/models/102279" rel="nofollow noopener">Toroidal Launcher Mini Rings - 100mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/97633" rel="nofollow noopener">Toroidal Launcher Mini Rings - 150mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/102728" rel="nofollow noopener">Toroidal Launcher Mini Rings - 200mm pitch</a></li></ul></li></ul><h3>Specifications</h3><ul><li>Three stage planetary gearbox with 1:48 gear ratio (overdrive)<ul><li>0.75mm gear module for ultra-smooth performance (24/72 teeth)</li><li>10mm hex driver for connecting gear stages</li></ul></li><li>Toroidal ring design with four blades (1.2mm thick) available in three sizes<ul><li>100mm diameter, 150mm pitch</li><li>125mm diameter, 175mm pitch</li><li>150mm diameter, 200mm pitch</li></ul></li></ul><h3>Printing tips</h3><ul><li>All prints pictured were printed using Bambu Basic and Matte PLA</li><li>For best results run flow rate calibration and thoroughly clean build plate</li><li>The launcher gears are available in two print profiles with the following changes to the standard 0.20mm profile:<ul><li>Arachne wall generator</li><li>5x top and bottom walls, 25% infill</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The toroidal rings are available as a single print profile with the following changes to the standard 0.20mm profile:<ul><li>0.6mm line thickness, Arachne wall generator</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The launcher housing prints with the standard 0.20mm profile.</li></ul><h3>Launcher Parts</h3><ul><li>Launcher Gears<ul><li>SunGear24.step [3x]</li><li>PlanetGear24.step [9x]</li><li>PlanetCarrier24.step [3x]</li><li>RingGearDouble.step [1x]</li><li>RingGearLid.step [1x]</li><li>RingDriver.step [1x]</li><li>GearDriver.step [1x]</li></ul></li><li>Launcher Housing<ul><li>HousingBase.step [1x]</li><li>HousingRingLid.step [1x]</li><li>HousingCarrierHolder.step [1x]</li><li>HousingCarrierThreads.step [1x]</li></ul></li><li>Toroidal Rings<ul><li>ToroidalRing100.step [1x]</li><li>ToroidalRing125.step [1x]</li><li>ToroidalRing150.step [1x]</li><li>ToroidalRingDriver.step [1x]</li><li>ToroidalRingLauncher.step [1x]</li></ul></li></ul><h3>Launcher Assembly (Gears + Housing)</h3><ul><li>Assembly the planet carrier with three planet gears and one sun gear as shown below. Repeat for all three planet carrier assemblies.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_efae722ebe2db.gif"></figure><ul><li>Use the shorter hex drive to connect two sets of gears. Align both planet carriers and hold them with one hand while holding the double ring gear in the other hand and slowly turning as you close the gear; once closed insert the assembly into the main housing to hold secure. The gears should spin freely; if they don't remove the gear assembly and repeat this step.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_f1371c6d57ee6.gif"></figure><ul><li>Use the longer hex drive to connect the last set of gears and then assemble with the threaded cap as shown below.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_4926c45fbbf51.gif"></figure><ul><li>Carefully mesh the single ring gear with the planet gears taking note of the 2mm flat section that is positioned towards the main gear assembly as shown below. Use the same method of rotating while slowly closing and covering with the cap to hold secure.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_54c6fffceb4e5.gif"></figure><ul><li>Done! The assembly should spin smoothly with the output shaft making 48 rotations for every one turn of the input knob. Performance depends on printer tolerances and filament used; for best results use the include print profiles with Bambu Studio (supports many different printers). A bit of lubricant can also be added to the gears to improve performance.</li></ul><h3>Toroidal Ring Assembly</h3><ul><li>Insert the hex drive into the interlocking driver; the clearance is tight but it should be a snug fit.</li><li>Insert the assembled driver into the output sun gear, the fit should be the same.</li><li>If the driver does not stay secured when launching the ring a small amount of CA glue can be use.</li></ul><h3>Changes</h3><ul><li>v1<ul><li>Initial release; files now available in v1old folder</li></ul></li><li>v1.1<ul><li>Updated print profiles with improved settings for gears and rings</li><li>Improved single color print profile, fits on A1 mini and objects are laid out to allow skipping</li><li>Improved clearance of gears and overall meshing</li><li>Updated toroidal ring to use the same launcher as the mini rings<ul><li>Print profile includes 3 sizes (100mm, 125mm, 150mm)</li></ul></li><li>Updated assembly instructions to have fewer steps with a GIF for each one</li></ul></li><li>v1.1.01<ul><li>Added new section for template designs intended for remixing</li></ul></li></ul>

Toroidal Launcher - High RPM launcher featuring compact planetary gearbox

Toys

SprocketStudios

Update January 25, 2024: A new version of this model has been released! It prints much cleaner at the bottom, and has the same threading. <a target="_blank" href="https://makerworld.com/en/models/156286" rel="nofollow noopener">Check it out here</a>. &nbsp;This is a large threaded egg. It was designed to be large enough to hold one of <a target="_blank" href="https://www.printables.com/model/525789-articulated-dragon" rel="nofollow noopener">McGybeer's articulated dragons</a> (printed at the default size). Looks particularly good in multicolor coextruded filaments.&nbsp;It will print OK without supports, but the bottom points of some of the scales get a bit messy.&nbsp;Update January 5, 2024: There is a new “revised” version which aims to address some of the issues with the messy early layers. It's not perfect by any means, but it has a wider base which is less prone to issues. There is also improved alignment of the lower scales.&nbsp;If you would like to print this model for commercial use you must purchase a license here: https://thangs.com/designer/Sprocket%20Studios

Large Threaded Dragon Egg

Boxes/Receptacles 

Pikachu Magnet, Holed are sized for 8mm*2mm Magnets but can easily be sized up/down in Bambu Studio

Pikachu Magnet 

Magnets

Crying Laughing Emoji Magnet.&nbsp;Original Hole in 3mf Bambu Silcer file is 8mm *2mm. The Hole can be scaled to accomodate any magnet size. The 3mf is a full plate of magnets to save on filament wastage. &nbsp;Tips: Move the emojis away from the words on the textured plate. They transfer over to the Manget. You are able to adjust the thickness of the colored portion (default is 2 layers) by scaling the z axis of the colored portions (Objects 1-11)You can adjust the thickness of the magnet by changing the Z- scale of object 12

Crying Laughing Emoji Magnet/Coaster

Emojis

ZipZapPrint

Plongez dans la magie des fêtes avec ce tout nouveau modèle 3D de Bob l'Éponge, spécialement conçu pour Noël. Bob l'Éponge est prêt à répandre la joie et la chaleur de la saison avec son bonnet de Noël et son sourire contagieux. Imprimez cette adorable figurine pour une touche festive dans votre collection!&nbsp;Dive into the magic of the holidays with this brand new 3D model of SpongeBob SquarePants, specially designed for Christmas. SpongeBob is ready to spread the joy and warmth of the season with his Christmas hat and infectious smile. Print this adorable figurine for a festive touch in your collection!