machinelifer

RETIRED GUY 3D PRINTING

First Hueforge print3Mf should include all the setting that i changed in slicerFeel free to give feedback as this is my first attemptOther profiles for Hueforge appreciatedThanks again3D printing keeps the brain active &nbsp;&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #17 (1.44mm) swap to Gray At layer #22 (1.84mm) swap to Jade White for the rest. &nbsp;

HARRY POTTER 3D HUEFORGE ART

HARRY POTHEAD

christoph.h

Please print my new profile, nor more losen parts and more details!!!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/466662#profileId-375666" rel="nofollow noopener">Mothers day heart V2 by christoph.h - MakerWorld</a>&nbsp;&nbsp;Mother&#39;s Day heart.you can use both sides.One side is completely straight, the other side is deeper on the inside and has a nice white edge on the inside.&nbsp;Check out my other models too!!

Mothers day heart

MA DUKES

pajonk85

Keyrambit spiner keyspiner keychainUse bearing 6803 (17x26x5)

Keyrambit spiner keyspiner keychain

FIDGET

LITHO

FarOutRide

This is an horizontal caliper holder for Ikea's Skadis pegboard. <figure class="image image_resized" style="width:43.8%;"><img src="https://makerworld.bblmw.com/makerworld/user/1025644419/draft/2023-09-25_6d62a648976fd.jpg"></figure>Compatible with:<ul><li>Neiko 6in Caliper (01407A). My favorite and a best seller on <a target="_blank" href="https://amzn.to/3tdVi8Z" rel="nofollow noopener">Amazon</a> (affiliate link). </li><li>(I'm a big fan of Neiko tools!)</li></ul>&nbsp;This print profile works well (although any other should work too):<ul><li>PLA</li><li>0.12mm layers.</li><li>2 walls.</li><li>15% infill.</li></ul>&nbsp;Print with normal supports for the feet only:<figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/user/1025644419/draft/2023-09-25_e6564fd368b69.jpg"></figure>&nbsp;

Horizontal Caliper Holder for IKEA Skadis Pegboard

HAND TOOLS

V-Day

BODY3D

As you liked my waste eater : <a target="_blank" href="https://makerworld.com/en/models/92332" rel="nofollow noopener">https://makerworld.com/en/models/92332</a>I had the idea of creating another one but this time with Kirby !<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/vaVUMW5bYIc"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=vaVUMW5bYIc"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/vaVUMW5bYIc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Since he eats everything, I thought it would be perfect :) It will make a very good waste eater for your A1 or A1 Mini or as a candy container or something else ^^ Very simple to print, no supports required. In total 6 colors, Pink, Dark Pink, Red, Blue, White and Black. And only 1 multicolor print for the eyes :) I hope you enjoy !&nbsp;Happy Printing !&nbsp;All my links : <a target="_blank" href="https://beacons.ai/body3d" rel="nofollow noopener">https://beacons.ai/body3d</a>

Kirby Waste Eater

Cool Shittt!

OreKo

Dragon LED Lamp for LED Lamp Kit 001. Created this from my Dragon Design and added it to fir the LED Lamp Kit 001 using the same base. Used Bambu Translucent PETG Gray.  Best when printed upside down with top on the base. I printed it without using supports. Some supports may help the lid but really I just sent it in no supports and it printed great.

Dragon LED Lamp for LED Lamp Kit 001

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014267/design/2023-09-19_1c59e405d0a79.png"></figure>This is a V-twin engine model that consists of various parts like a crankshaft, connecting rods, camshafts, gears, and a throttle valve, among others. It can replicate the functioning of a real engine. The engine model has magnetic decorative covers and hollowed-out structures that make it easy to observe the internal parts. It can be rotated using either a manual crank or an electric motor. In manual mode, the engine runs at a slow pace, allowing for a better observation of each movement. With the motor drive mode, the engine can run continuously by using the motor to rotate the crankshaft.&nbsp;Recommended filaments: Bambu PLA series, PLA Basic is recomended especially in moving parts<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament</a>Hardware Kit: Engine Model Components Kit-005<a target="_blank" href="http://store.bambulab.com/products/engine-model-components-kit-005" rel="nofollow noopener">http://store.bambulab.com/products/engine-model-components-kit-005</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the video tutorial step by step to print and assemble your build. <figure class="media"><div data-oembed-url="https://youtu.be/wv3qnfMbuko"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/wv3qnfMbuko" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Engine Model 005

BIY Models

TESTS 

3DXAV

Sorry, I don't speak Taka Taka!Deadpool knife-holder/knife block&nbsp;Nozzle size: 0,6-0,4 mm Layer height: 0,4 mm Infill:8-10%, you can add more if you want a stronger block

DEADPOOL KNIFE HOLDER

COMIC BOOK

3DP RNS

★ New Robot Unveiled!&nbsp;[3DP RNS] Spi V1.0 (3D Printed Robot)<ul><li>Series : 6 Legs / 6-Legged Spider Type [<a target="_blank" href="https://youtube.com/shorts/I7V7X6KWw58?feature=share" rel="nofollow noopener">Youtube Video</a>]</li><li>This Is an all at once print. Assembly not required :)</li><li>If you subscribe to the YouTube channel [<a target="_blank" href="https://bit.ly/2KC3Tdx" rel="nofollow noopener">3DP RNS</a>], ★ a new robot will be revealed.</li><li>Thank you for your subscribing! It means a lot to me :)</li><li>Commercial License [<a target="_blank" href="https://www.patreon.com/3DPRNS" rel="nofollow noopener">Patreon</a>]</li></ul>&nbsp;※ Notice For my uploaded robot model to enable all joints to move, it&#39;s advisable to use a Brim.  If removing Brim is inconvenient or challenging, I don&#39;t recommend printing it.  Also, joint functionality may vary depending on the printer and filament you use. I hope your print is successful and you can have a robot with well-functioning joints.<figure class="media"><oembed url="https://www.youtube.com/shorts/I7V7X6KWw58"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Venom Weaver V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-venom-v1-102280396?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Venom Weaver V1.0 Download [Patreon]</a></li><li>Venom Weaver V1.0 can be obtained through Patreon (Hero) membership.</li><li>Venom Weaver is a spider-like robot with eight legs that moves quickly. It can emit venom or explode to spread poison. It&#39;s dangerous, so avoid it if you encounter one.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/MX6lzRMSDXo"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Crawler V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-crawler-104482987?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Crawler V1.0 Download [Patreon]</a></li><li>Crawler V1.0 can be obtained through Patreon (Hero) membership.</li><li>It is a hexapod robot with long legs, allowing it to move quickly. High-performance sensors are installed on its legs and body, providing excellent detection capabilities.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/nqp_DcHcsJk"></oembed></figure>