m.rittweger

SabreDesign

Remix of HanochH model on thingiverse, all rights go to the original creator. I merged the parts together and scaled to realistic size as seen in the movie. Also optimised the mesh to minimise some steeper overhangs on the details.  Body and head are best printed seperately to ensure higher quality. Head has a thick brim added to avoid any vibrations during printing, this brim can be simply broken off by hand. I also added a multicolour version for the head with the eyes printed in black in case you dont choose to paint the model.  I printed multiple of these models and painted some for friends and family. You only need basic acrylic paint, some black nail polish and some brushes to bring little groot to life. I found normal acrylic paint works great on PLA parts.   You can follow the directions below if you want to paint the model:<ol><li>Use a fairly light coloured filament to print the model, I prefer to use white or a light brown since it creates a nice base colour.</li><li>Paint the base coat in medium to dark brown (optional: use hairdryer to dry paint quickly)</li><li>Lightly paint a lighter wood brown colour over the darker brown coat, making sure cracks and crevasses are not filled by this layer (again can use hairdryer to accelerate drying)</li><li>Use an even lighter brown and very little paint on the brush to very lightly brush on some highlights (let dry again)</li><li>Make a black and dark brown dilluted wash with water and use a spunge or kitchen paper to dab it into the crevasses of the model, make sure to wipe it away with kitchen paper within a few second after dabbing it on, this ensure the lighter brown top coat keeps its light colour does not get to dark or dissolves by the wash again.</li><li>Let the whole model dry thoroughly before painting the little vines and mossy hair with light and darker green paint and a very thin brush.</li><li>Finally after all has dried use black nail polish to paint the eyes and make them glossy, this really brings the model to life. I put one drop of nail polish on the eyeball and then dab the nailpolish brush dry on a piece of paper and then continue using it to precisely coat the eyeball to the edges. Less is more in this case, you doint want the nailpolish to droop and can allways add a little more if you used to little.</li><li>Finally after drying you can choose to coat the whole model in a spraypaint clearcoat to seal the paint.</li></ol>&nbsp;The Remix of HanochH is based of this model <a target="_blank" href="https://www.thingiverse.com/thing:2014307" rel="nofollow noopener">https://www.thingiverse.com/thing:2014307</a> all rights to the original creator

Baby Groot

dust catcher

angesoso77

HUEFORGE POKEMON EVOLI

wall art

thrutheframe

<h3>NOTE:</h3><ul><li>Please read the instruction guide below. </li><li>Download the 3mf file if you are using a Bambu slicer. Download the stl if you are using other slicers. </li><li>I do my best to double-check and test the print profiles I created. Therefore, I will only take feedback and update for those profiles. I cannot vouch for profiles uploaded by others, so please do due diligence.</li></ul><h4> </h4><h3>UPDATE 6 Aug 2023</h3>My Bambu cube needed an update, so here it is. Embosses are now 1.4mm rather than 2mm. Kind of overkill with a 2mm overhang. The base of the cube now fits 608 bearings. This will allow the cube to spin when placed on the Bambu dish. <figure class="image image_resized" style="width:357.003px;"><img src="https://media.printables.com/media/prints/222285/rich_content/6344c28b-2a73-4bc5-a89c-0fce944065aa/thumbs/cover/800x640/png/bambu-cube-update-1.webp"></figure><h3>INTRODUCTION</h3>A fun project to design an XYZ calibration cube with a Bambu Lab theme. I designed this because I dislike printing benchy.<ul><li>Bambu Cube 30x30mm</li><li>All embossed is 1.4mm deep</li><li>This print test for overhang, dimension accuracy and fitting. </li><li>No support is needed. </li><li>The circular hole for 608 bearings is designed with a diameter of 22.2mm </li><li>(optional print) Bambu Cover is 2mm thick and fits exactly into the top opening with 0.2mm offset; to test part fitting. </li><li>(optional print) Bambu Dish is 80mm in diameter and 10mm in height; to display the Bambu Cube and check the seam finish.</li></ul><a target="_blank" href="https://www.youtube.com/shorts/N0OXzKaYPGU" rel="nofollow noopener">Youtube short of the Bambu Cube</a>&nbsp;To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like them and want to contribute to my coffee addiction & help fund the filaments I need for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated. <h3>CAVET</h3>As with all my designs, it may and may not work for you. So print and install at your own discretion.

Bambu Lab XYZ Calibration Cube

calibration

3D design shop

I added a side handle to easily flip it upside down into the trash.&nbsp;Width 133 mm. length 254 mm.&nbsp;You should also print this here <a href="https://makerworld.com/en/models/62345#profileId-66239" rel="nofollow"> https://makerworld.com/en/models/62345#profileId-66239</a>

A1 Poop Bucket+Compatible with AMS lite top mount

A1 poop

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-25_28088e30b1c02.jpg"></figure>This 3D-printed mouse has a futuristic hollow shell design, revealing its internal structure. This generative design shell structure is possible only with 3D printing. Our industrial designer fully utilized the advantages of a 3D printed structure to present you with this magnificently artful mouse.&nbsp;Recommended filaments: Bambu PLA series<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>If using PLA matte, metal, silk, please slowly screw in the bolt and avoid over-tightening to prevent structural damage.Print Setting: Print without support, v2.0 print profile recommendedHardware Kit: Wireless Mouse Components Kit-002<a target="_blank" href="http://store.bambulab.com/products/wireless-mouse-components-kit-002" rel="nofollow noopener">http://store.bambulab.com/products/wireless-mouse-components-kit-002</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide or video tutorial below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-15_12b653452832c.png"></figure><figure class="media"><oembed url="https://www.youtube.com/watch?v=lkOg_X4qjW8"></oembed></figure>

Wireless Mouse 002

wireless mouse

Alpha M

I was looking for an AMS stand that was a bit sturdier than the models previously available for download so I designed this one. This design incorporates just two pieces that can be printed in one shot in the x1c/p1p and then popped together quickly to form a strong bond. Each half of the stand can be printed inside the x1c/p1p in any orientation, or both halves at once in upright or upside down orientation. I printed this “upside down” as it used less support material.&nbsp;This design is intended for spaces like mine (on my kitchen counter) where there is sufficient counter depth to slide the stand backwards (or sliding lower AMS forwards) when needing to access the lower AMS.&nbsp;The file will import to Bambu Studio with both halves together. The “separate as objects” button in Bambu Studio lets you move each half independently.&nbsp;You can slice how you&#39;d like, but in case you&#39;re interested, I sliced this with 3 walls, 15% gyroid fill and I created some modifier boxes around the hooks and hook receptacles and made those parts a 100% rectilinear fill for a solid “lock”. I also added 60% rectilinear fill by the handle as it gets fairly thin there, although I doubt that was needed. I used Bambu PLA Marble filament for both the white and red portions (and Bambu PLA Support for the support interface). It used about 1.5 rolls of the white filament.&nbsp;This is 250mm tall so it can print upright (or upside down) in the x1c/p1p without any modifications to basic settings.note, this does not fit all versions of the AMS stand. It fits the ones I have (both purchased in August, 2023 in Canada). It may be a good idea to first print just the top slots to check compatibility with your AMS before printing the entire model. You can adjust the Z height of the model in Bambu Studio (only material above the print bed will get printed).

Sturdy Bambu Lab AMS Stand

Bambu AMS

TI99 f-key inlay