m.ribeiro

Janne.

Trelock B4 FG/SSF lock holder for Ninebot Kickscooter F30.2 x Bolt M5x202 x Nut M5

Trelock lock holder for Ninebot Kickscooter F30

Scooter

gabber130779

This is my first self designed Lightbox&nbsp;V3: litle improvement on Nose for better optic.

Olaf from Frozen Lightbox

Lightbox

eds_3d_shop

🙏😊💬Quote from user feedback: &#34;…finally a design that is minimally invasive and works well all the time, does not fall down during operation, without danger of destroying LED and without having to stick some constructions on the first-stage-motors with double-sided adhesive tape!&#34;&nbsp;⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏 ! Please take bed adhesion very seriously when printing these little helpers, use 3DLAC OR GLUE STICK if necessary, BUT not BRIM, if you want a nice Logo quality! In my printprofile the color sequence is set so that the logo color is printed first in order to get very nice, sharp contours. When BRIM is switched on, Brim will also be printed in LOGO color and unsightly marks will be left on the edges !If you are unsure about bed adhesion - please use the “Mice Ears” print profile! 👌&nbsp;<h3>⚠️Does my AMS need version 3.1 or 3.0?</h3>If your AMS was delivered to you by Bambu Lab before October 2023, then just print version 3.0.If your AMS was delivered to you by Bambu Lab after October 2023, then I would simply measure the AMS Feeder Funel - see the pictures below.<h4>⚠️If the funnel diameter is about 14.3mm, then you should print version 3.0, if it is about 14.5mm, then print <a target="_blank" href="https://makerworld.com/en/models/192143#profileId-212297" rel="nofollow noopener">version 3.1</a>👌</h4><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079334/design/2024-02-13_08bb8c9fc5171.png"><figcaption>If the funnel diameter is about 14.3mm - then you should print version 3.0</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079334/design/2024-02-13_d9278fcd1061b.png"><figcaption>If the funnel diameter is about 14.5mm then print <a target="_blank" href="https://makerworld.com/en/models/192143#profileId-212297" rel="nofollow noopener">version 3.1</a></figcaption></figure></td></tr></tbody></table></figure>Thanks to my supporters and testers <a target="_blank" href="https://makerworld.com/en/u/2843581120" rel="nofollow noopener">@linshuuyuu</a>, <a target="_blank" href="https://makerworld.com/en/u/815356263" rel="nofollow noopener">CROKOBIBI</a>, <a target="_blank" href="https://makerworld.com/en/u/4070704053" rel="nofollow noopener">@TheEngineer</a>, <a target="_blank" href="https://makerworld.com/en/u/1817999304" rel="nofollow noopener">Susi-Knalltüte</a><a target="_blank" href="https://makerworld.com/en/u/1817999304" rel="nofollow noopener">@user_1817999304, </a><a target="_blank" href="https://makerworld.com/en/u/3627188750" rel="nofollow noopener">@Encore94</a> With their great help I was able to check and improve the functionality of the version 3.1!!! 🙏❤️👍<h3>Version 3.0 with very popular “ARROWS Logo” (You asked - I created it! )😍👍</h3><h3>Why this Version 3.0?</h3>I get a lot of feedback for my AMS Protectors, which I am very grateful for! 🙏😍 Recently, there have been increasing reports that the AMS lid could not be closed completely when Funnel Protectors v.1/v.2 were installed - after measuring, it was found that in such cases AMS first stage feeders were 2.5mm higher than in AMS versions before. I&#39;ve done refactoring of the design of v.2 to minimize the height of AMS Funnel Protector and at the same time, I changed the inclination of the push button by 14° to achieve more ergonomic operation. My fingers often slipped on v.1/v.2 😂<h3>Version 3.0 is full compatible with ALL previously (delivered before October 2023!) AMS revisions! 👌😊</h3>Thanks to my supporters and testers <a target="_blank" href="https://www.printables.com/de/@CerialPhreak_1003972" rel="nofollow noopener">@CerialPhreak_1003972</a>, <a target="_blank" href="https://www.printables.com/de/@tlum00_718492" rel="nofollow noopener">@tlum00_718492</a>, <a target="_blank" href="https://www.printables.com/de/@RebKing_263863" rel="nofollow noopener">@RebKing_263863</a> With their great help I was able to check and improve the functionality of the version 3.0!!! 🙏❤️👍<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - what is that good for?</h3>I have read some reports that the abrasive filaments &#34;grind&#34; the feeders from AMS (which are from soft plastic too) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 70.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079334/design/2023-10-25_8hoqibaoyj3w.png"></figure></td><td><figure class="image image_resized" style="width: 66.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079334/design/2023-10-25_u8iyxwgrbe3q.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model!) and reconstructed it so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-)&nbsp;For version 2.0 I achieved the best results with the PTFE length of 18mm. I used a replacement PTFE tube that came with my Bambu Lab X1 Carbon.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder!<h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,36 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)Take a look at the Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look at this video, here you can see how you can easily get these protectors on the feeder properly!⚠️IMPORTANT!⚠️ You don&#39;t need to disassemble your AMS or remove any parts!<figure class="image"><a href="https://www.youtube.com/watch?v=B__yoIvm2HE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079334/design/2023-12-25_f39cd3895ac75.png"></a><figcaption><a target="_blank" href="https://www.youtube.com/watch?v=B__yoIvm2HE" rel="nofollow noopener">YouTube Video: Installation and removing of „Eds Perfect Fit Protector for BambuLab AMS Funnel-Feeder“</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;Please look at these pictures - good example of correct installation 👌😊👍<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079334/design/2024-04-08_a801552bcd1f6.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079334/design/2024-04-08_e60113e41f4b8.png"></figure></td></tr></tbody></table></figure>&nbsp;— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)&nbsp;⚠️If you have an A1/A1mini with AMSlite - take a look at this design 🦾😊<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079334/design/2024-05-18_ccdb0c618a4df.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td><td><figure class="image image_resized" style="width: 97.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079334/design/2024-05-18_bfa54dc7f896d.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td></tr></tbody></table></figure><h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079334/design/2024-01-12_00009ce9c82bf.png"></a><figcaption>🔗<a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">Eds_3D_Shop designs on MakerWorld</a> 🔗</figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;

v.3.0 AMS Feeding Funnel Wear Protector

upgrades

proto_boy

Like others, my family enjoys the Tetris balance game. We enjoy the version from <a target="_blank" href="https://www.printables.com/model/335938-balance-tetris" rel="nofollow noopener">paulorfo</a>. The box options available were not to my liking. Who wants to carefully stack the parts in a box? That's right, we all want to just toss them in. So, I made this simple and relatively quick-printing box to make that easy. Toss all the parts in relatively flat and uniform and store them for next time. No dividers or particular organization other than they lay flat. This box pictured has 6 sets of pieces in it. It can likely accommodate more but I have not tested it.&nbsp;The letters for the lid are easily paintable and able to split in Bambu Studio if interested. Glue it all up and enjoy!&nbsp;There are two versions available:<ol><li>Original - with a looser lid which is my preference</li><li>Version 2 - Tighter lid based on feedback!</li></ol>&nbsp;Check out my <a target="_blank" href="https://makerworld.com/en/models/86631" rel="nofollow noopener">Tetris 360 Base</a> for a new spin on the game!<figure class="image image_resized" style="width:63.4%;"><a href="https://makerworld.com/en/models/86631" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/247772/2023-12-08_40567bc5d9e04.jpg"></a></figure>

Tetris Box With Letter Plate

drucken

Micro Center- Inland Filament

Legend of Zelda Tears of the Kingdom Master Sword&nbsp;Inland Filament Used: <ul><li><a target="_blank" href="https://www.microcenter.com/product/485632/inland-175mm-pla-3d-printer-filament-1kg-(22-lbs)-cardboard-spool-blue" rel="nofollow noopener">Blue PLA</a></li><li><a target="_blank" href="https://www.microcenter.com/product/486259/inland-175mm-pla-3d-printer-filament-1kg-(22-lbs)-cardboard-spool-silver" rel="nofollow noopener">Silver PLA</a></li><li><a target="_blank" href="https://www.microcenter.com/product/623232/inland-175mm-pla-silk-3d-printer-filament-10-kg-(22-lbs)-spool-gold" rel="nofollow noopener">Gold PLA</a></li><li><a target="_blank" href="https://www.amazon.com/dp/B00YQB85PG?ref=myi_title_dp&th=1" rel="nofollow noopener">Inland PLA on Amazon</a></li></ul>Printer Settings:<ul><li>22H 3M total</li><li>The Hilt may need supports, but with good cooling and bed adhesion you may not need supports</li><li>10% Gyroid Infill, 2 Perimeters, 45mm/s</li></ul>STL designed by <a target="_blank" href="https://www.instagram.com/dsk001_3d/" rel="nofollow noopener">dsk001_3d</a>