lyss78

3D design shop

After a long journey, I've finally completed my flexible skeleton dragon.&nbsp;It's a fun piece of toy that's incredibly flexible, with virtually all joints capable of movement. It has become a huge hit with the kids at home!&nbsp;I printed it on a smooth surface, which eliminates potential issues with adhesion on a textured bed. If adhesion problems persist, I recommend adding a brim.&nbsp;Improved version

Articulated Skeleton Dragon

soarpix

<h2>Custom WILLYS JEEP</h2><ul><li>Complete model kit</li><li>Spinning wheels</li><li>This model does not need any additional non-3dprinted parts</li><li>The design is divided in many different parts in order to allow printing different parts with different colors</li></ul>If you want rim and tire separated you can find it here: <a target="_blank" href="https://makerworld.com/en/models/433445" rel="nofollow noopener">https://makerworld.com/en/models/433445</a>&nbsp;Resolution: 0,2 Supports: Yes Infill: 15% Filament Material: PLA&nbsp;If you have any questions, let me know in the comments or on my youtube channelHAPPY PRINTING!<h2>Click here to wach the video =) <a target="_blank" href="https://youtu.be/eVaXzeeD8cM" rel="nofollow noopener">https://youtu.be/eVaXzeeD8cM</a></h2><h2>Post-Printing</h2><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433442/design/2024-04-18_ega264w78jwu.jpg" alt="image">                <h2>Click here to wach the video =) <a target="_blank" href="https://youtu.be/eVaXzeeD8cM" rel="nofollow noopener">https://youtu.be/eVaXzeeD8cM</a></h2>

WILLYS JEEP - Fully printable

车模

TreeNB(亨利方)

<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1RC4y1y7Nj/?share_source=copy_web&vd_source=686042c1d0a498840db169aa416a0328"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1RC4y1y7Nj&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1RC4y1y7Nj&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Firstly, this is a customizable tool holder for every user. you can print any different size of unit. and assmble them together as my way shown below.The model i post is 6colums x 5layer size. it include:<ol><li>unit 1*1(20mm*20mm) 7pcs</li><li>unit 1*2(20mm*40mm) 2pcs</li><li>unit 1*3(20mm*60mm) 1pcs</li><li>unit 1*4(20mm*80mm) 2pcs</li><li>unit 2*2(40mm*40mm) 2pcs</li></ol>This is just a standard dsign that i made, but you can create your own combinations. and show picture here for people to referance.<img src="https://makerworld.bblmw.com/makerworld/draft/250071/2023-12-05_i7vnh5icd55c.gif">Secondly, This is 45° hanging version of this series. the purpose that i build this model is because i have no space on the table for any box. And I am too lazy to open and close box time and time to find my tool. 45 degree design is just for seeing every layers of my tool easily.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/250071/2023-12-05_4z8ujyavunmz.jpg"></figure>&nbsp;I acctually made a vertical version at the same time. and i will post it later of this week.&nbsp;if you feel like my design please follow me and thumbs up!&nbsp;

Customizable Tool holder

工具收纳

Mr.X3D

The idea to design and build this has been with me for a while, and I finally got the time to do it….&nbsp;What is it?&nbsp;This is a fusion of the Bambu Lab AMS Lite and the Filadryer S4 by Sunlu. First and foremost it will allow you to keep your filament dry and also print directly from the Filadryer but with AMS Lite capabilities. Second, you will clear up space on your desk (if you previously had the AMS Lite standing on it). You will also get a tray on top to store some stuff.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/2Q9C1bFs7RI?si=E8K7lpsVw9x-isAr"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=2Q9C1bFs7RI"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/2Q9C1bFs7RI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Lets get to it!&nbsp;My list of prerequisites were:<ul><li>All functionality of the AMS lite should persist.</li><li>All functionality of the Sunlu S4 filament dryer should persist.</li><li>No modification or damage to the original parts of both the AMS Lite or Sunlu S4 allowed. (reassembly must be possible)</li><li>No or at least minimal supports required when printing.</li><li>Only printed parts allowed, no additional parts (like screws, bearings, etc) should be required.</li><li>As much as possible of the design to be "mirrored".</li></ul>All plates and parts needed are stored in the 3mf-file. I used a X1C to print the parts. I opted for ABS since it usually gives great durability and finish. It will most likely work with PETG or even PLA, but I have not tried that, and PLA might be insufficient in drying temperatures.&nbsp;For a smooth journey I would start like this and print:<ul><li>BASE A</li><li>BASE B (Exactly the same as BASE A)</li><li>CLIPS & LOCKS & PLUGS</li></ul>While printing, disassemble the AMS Lite. There are guides for this in the wiki:<a target="_blank" href="https://wiki.bambulab.com/en/ams/maintenance" rel="nofollow noopener">AMS Maintenance and How To guides | Bambu Lab Wiki</a>&nbsp;To remove the feeder units, unscrew the four screws that are attached to the main body and unplug the to ribbon cables from the mainboard. The feeder units does not require any further disassembly.When you have removed the motherboard (Details in the wiki), carefully remove the NFC sensor windings from the main body. Easiest way to do this was to use a screwdriver and bend carefully at each place where there is silicone, It is four places in total for each sensor.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_a3d4f5fbdc08e.png">&nbsp;That's all AMS parts you need to disassemble. You should now have this in front of you<ul><li>First stage feeder kit</li><li>1x Motherboard</li><li>4x NFC Sensor windings</li><li>4x rolls</li></ul>Now turn to the Sunlu S4. The top covers needs to be removed. I was puzzled of how to to this but found out that if one cover is opened and then carefully bent, it would snap out from the chassis.&nbsp;When you have finished printing the first three plates print the following plates:<ul><li>LEG A</li><li>LEG B</li><li>YELLOW SPOOL HOLDER (x2 on the plate)</li><li>GREEN SPOOL HOLDER (x2 on the plate)</li><li>LEG C</li><li>LEG D</li></ul>(All LEG parts are exactly the same)&nbsp;Assembly of the SUNBU AMS LITE main body&nbsp;BODY A and BODY B will jack in to each other. Just pair the edge at an angle and twist them together:<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_ab52ec925e33f.jpeg">--→&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_785927e1c5f86.jpeg">&nbsp;Now find the following parts from the CLIPS & LOCKS & PLUGS plate:<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_f0e7b8cbb5b4d.png">&nbsp;Push the three H-shaped slips into the main body. You can use the rear side of a screwdriver for this. Or any other tool you like. Or just toyr thumb. Note that the clips have a chamfer on one side. That side is the one that goes into the model.<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_e8e15130f15ed.jpeg">&nbsp;Now turn to the two small 6x10mm poles. Drop one sideways into each of the slots on the top side of the main body. Use a screwdriver and push the pole into the next part of the main body. Press it all the way in.<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_a39dbaa46ddfe.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_a57c1e7d4572d.jpeg">&nbsp;Now take the two "lid-blocks" and push down one in each hole<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_9e4e233ce63ba.jpeg">&nbsp;If you have finished printing the next 4-6 plates you can start assembly of the legs.While doing so print the following plates:<ul><li>FIRST FEEDER STAGE MOUNT & MB HOUSING</li><li>SENSOR COVER A</li><li>SENSOR COVER B (Same as SENSOR COVER A)</li><li>HANDLE A</li><li>HANDLE B (Same as HANDLE A)</li></ul>this should conclude the printing of parts.&nbsp;Assembly of the legs&nbsp;From the CLIPS & LOCKS & PLUGS plate find the 4 squared lock-platesTake one LEG-part and slide it into the lock plates that you will have to put in from below. The easiest way to fit the legs is to start with one lock plate and just get it to attach enough to hold it in place. After that do the same with the second lock plate and finally slide the legs as much as it allows for. (Never mind the yellow cross below the leg, I did assembly in a different order that was not optimal)<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_825180773f66b.jpeg">&nbsp;Grab the YELLOW SPOOL HOLDER and push it through the first leg half<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_c0abec028a4b7.jpeg">&nbsp;IMPORTANT!The spool holders must be inserted to the correct leg half, otherwise to rollers will not be oriented correctly. If installation is done as in the pictures you will be fine!&nbsp;Now, push the GREEN SPOOL HOLDER through the second leg part<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_c514f6683f1a9.jpeg">&nbsp;Take the second leg half and push it to align with the first leg half.<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_13be645e3bec.jpeg">&nbsp;From the CLIPS & LOCKS & PLUGS plate find the 28 clips (4mm thick)From this point there is no turning back, you will not be able to disassemble the legs after this without drilling all clips so:MAKE SURE YOU HAVE THE ORIENTATION OF THE YELLOW AND GREEN SPOOL HOLDERS CORRECT!&nbsp;If you have the main body laying upside down in front of you, there should always be a YELLOW SPOOL HOLDER on the top right corner.&nbsp;Put clips into the leg by pushing it into the holes. The clips have a chamfer on one side that goes into the leg.<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_7a028f944acf1.jpeg">&nbsp;When you have assembled one leg do the same procedure with the other leg.Note the orientation for GREEN and YELLOW SPOOL HOLDER!!!!!! (See complete assembly 3 pics below)&nbsp;Install the NFS sensor windings for each roll and pull the wire through the hole in the base plate.<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_b9bd81372a6ab.jpeg">&nbsp;Install the sensor covers by pushing them down into the shaft<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_99bcb5cad7926.jpeg">&nbsp;&nbsp;The result should look something like this:<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_622813e08e507.jpeg">&nbsp;Now, mount the original spool holders, It might take some convincing, but they will fit eventually…<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_8aa8596def4cb.jpeg">&nbsp;Add some rolls of filament, or don't. It's up to you, it was my way of getting the assembly to be able to turn over and rest horizontally while assembling the rest. A different option is to place it in the Sunly S4…<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_f21f65277dd82.jpeg">&nbsp;Attaching and connecting the motherboard&nbsp;There is a surplus of mounting points for the motherboard due to the mirrored design of the parts. Some of the surplus mounting points needs to be cut away (use a sharp plier). You will realize which ones that needs to be kept. The motherboard is mounted upside down.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_733dde974bb1c.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_d46dca89eac79.jpeg">Note the arrangement of the ribbon wires. (B/W to the left), And also the numbering I did on the motherboard. It is the corresponding sensor wire for the NFC sensors.&nbsp;We have now come to the point of mounting the housing for the motherboard. Locate the parts printed on the FIRST FEEDER STAGE MOUNT & MB HOUSING plate and take one of the MB Housing parts, and slide it onto the rails of main body. Make sure to keep the ribbon wires out of the way,<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_4f7143f9474ad.jpeg">Do the same thing with the second mb housing part<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_f4299c08f864b.jpeg">&nbsp;Slide the two AMS Interface units into place<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_a93ba0933f5fa.jpeg">&nbsp;Screw the AMS first stage feeder assembly into place. make sure that the numbering of the feeders cohere to the numbering on the mainboard.<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_13fd979fcfee.jpeg">&nbsp;Assembling the handle&nbsp;Locate the grip lock and grip interface from the CLIPS & LOCKS & PLUGS plate:<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_2790f9516f092.png">&nbsp;I don't have pictures of this, but it is more or less the same procedure as when mounting the legs.Locate HANDLE A & HANDLE B. They look the same (and are identical in design)<ul><li>Attach one of the handles to both grip interfaces by sliding them</li><li>Attach the other handle to both grip interfaces by sliding them</li><li>Locate the grip clips (x18) from the CLIPS & LOCKS & PLUGS plate</li><li>Push all 18 clips into the handle</li></ul>Now you have a grip assembly in your hand that should enable you to:&nbsp;Push each of the grip interfaces through the holes in the main body and use the grip lock (the bar) on the other side to keep them in place. I used a water plump pliers kind of tool to push the bar into the right place. As explained before, I initially did this assembly in a different order, hence no legs are present in this pic:<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_150e61e4525d3.jpeg">&nbsp;The result should look something like this (But with more clips installed):<img src="https://makerworld.bblmw.com/makerworld/draft/451566/2024-01-24_6f44a4dd3dd77.jpeg">&nbsp;So, final touch. And yes, I know, it contradicts my prerequisites since it adds additional parts, but it is optional;<ul><li>For each first stage feeder, put a small PTFE tube trough the main body. It will simplify the loading of filament…</li></ul>There are some models on the CLIPS & LOCKS & PLUGS plate that you can use to plug unused holes in the base.&nbsp;Final Notes&nbsp;If you are to print TPU it is (as you most likely know) not supported by the AMS Lite. In that case remove one of the original rollers from the Sunbu AMS Lite and feed the TPU through one of the standard filament holes of the filadryer S4. The roll will then rest on the original rollers of the S4.&nbsp;I think I covered all now. If not, let me know….

SUNBU LAB AMS LITE 1.0

vzki

舞狮，是中国优秀的民间艺术，其中的狮子被称为醒狮这个模型需要添加支撑，但非常好拆除原始模型大小为：96x88x80 mm可以自由调整大小，但不建议太小会丢失一些细节因为我没有ams，所以没有多色打印版本，如果你想上色的话可以根据我上传的渲染图，我觉得非常好看祝你打印愉快&nbsp;Lion dancing is an excellent folk art in China, and the lion in it is called the "Awakening Lion."The model needs support but is easily removable.The original model size is 96x88x80 mm.You can freely adjust the size, but it is not recommended to make it too small as it may lose some details.Unfortunately, I don't have AMS. If you want to add color, you can refer to the rendering image I uploaded. I think it looks very nice.Wish you a pleasant printing experience.&nbsp;

龙

车模

工具收纳

AMS

AMS托架