lyonsfive

Tjoene

Chichén Itzá Sand Castle Mold: Discover Ancient Wonders at the Beach!Dive into a summer of adventure and creativity with the Chichén Itzá Pyramid Sand Castle Mold! Perfect for beachgoers of all ages, this mold lets you build a stunning sand replica of the ancient Mayan pyramid of Chichen Itza, El Castillo, also known as the Temple of Kukulcan.Bring a touch of history and wonder to your seaside fun.&nbsp;Recommended Materials: This was printed in pla+, but I would also recommend petg or abs for durability. Orientation and support: This model was printed with 10% infill, without support and with the opening of the mold facing up (as in the 3mf file).

Chichen Itza Pyramid Sand Castle Mold

Beach

jdicerchio

These pencil earrings go great in the classroom or around the house and are great gifts for teacher friends!&nbsp;&nbsp;&nbsp;Other earrings available here!&nbsp;Strawberry Earrings: https://makerworld.com/en/models/504789#profileId-420444Pencil Earrings: https://makerworld.com/en/models/504778#profileId-420433Orange/Lime/Lemon Earrings: https://makerworld.com/en/models/504776#profileId-420426Avocado Earrings: https://makerworld.com/en/models/504768#profileId-420418Watermelon Earrings: https://makerworld.com/en/models/498705#profileId-413337Firecracker Earrings: https://makerworld.com/en/models/477719#profileId-388811&nbsp;

Pencil earrings

Earrings

BrickSaberBuilder

Ignite your inner Jedi with this awe-inspiring, life-sized collapsible LEGO lightsaber! This LEGO lightsaber is fully 3D printed. When collapsed its 7.5 inches long but when extended its almost 30 inches! Its perfectly sized for both adults and kids. The blade is interchangable as the top of the handle unscrews allowing you to switch out the color of the lightsaber. Use it as a desktop ornament or a prop for your next adventure!&nbsp;<h4>It is recomended to use a raft on the blade.</h4>

Life Sized Collapsible Lego Lightsaber

Star Wars

CalRo3D

ABOUT THE MONARCHEvery fall, as cold weather approaches, millions of these delicate insects leave their home range in Canada and the United States and begin flying south. They travel between 1,200 and 2,800 miles or more from the northeast United States, and southeast Canada to the mountain forests in central Mexico, where they find the right climate conditions to hibernate from the beginning of November to mid-March.&nbsp;Adult monarch butterflies possess two pairs of brilliant orange-red wings, featuring black veins and white spots along the edges. Each adult butterfly lives only about four to five weeks.&nbsp;Monarchs are on the the WWF endangered species list. WWF’s 2013 report from Mexico showed that the number of monarch butterflies wintering there was at its lowest in 20 years. The number is measured by the amount of forest they occupy, and in 2013 the number of butterfly acres decreased from approximately seven to three. Abnormal patterns of drought and rainfall in the U.S. and Canada breeding sites may have caused adult butterfly deaths and less plant food for caterpillars. Fewer butterflies up north mean fewer then migrate south to Mexico for the winter.- WWF&nbsp;<a target="_blank" href="https://www.worldwildlife.org/species/monarch-butterfly" rel="nofollow noopener">https://www.worldwildlife.org/species/monarch-butterfly</a>&nbsp;SYMBOLISMIn a nod to their life cycle, from egg to caterpillar to butterfly, monarchs can represent transformation and rebirth to some people. They might view a monarch sighting as a sign of upcoming change or a new direction in their life.&nbsp;PRINTINGDesigned to be printed using multi-color printers, this monarch is only 1mm thick to allow the wings and body to be shaped to closely resemble an actual Monarch.&nbsp;<blockquote>How do I bend the wings?</blockquote>There are several ways to do this, I personally use a small heat gun to bend them.<blockquote>I do not have a heat gun</blockquote>The glass temperature of PLA is approximately 60C. And since most 3D printers have heated beds, then you can actually use the bed to get the print up to the glass temperature. The model being 1mm thick allows this to happen easily.<ol><li>First, remove the print once the job is complete.</li><li>Heat the bed to 70C.</li><li>Place the print on the bed and place a large flat object over the print to prevent warping. (i.e. a book or a spare bed plate)</li><li>After a few minutes, the print should have reached the glass temperature for PLA. Gently pry the print off and the wings should feel soft and will be able to flex.</li><li>Mold the wings to the desired position and allow to cool.</li><li>Enjoy!</li></ol>*UPDATE* - 2024-05-06There are two holes on the edges of the wings, these can be used to suspend the model.<figure class="image image_resized" style="width: 45.74%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454648/design/2024-05-06_517770650652a8.jpg"></figure>Also included a model for a stand, although this is still a work in progress.<figure class="image image_resized" style="width: 27.93%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454648/design/2024-05-06_7f22ca59345448.jpg"></figure>*UPDATE* - 2024-05-12Updated the stand to include a slot for a bit more stability.<figure class="image image_resized" style="width: 27.43%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454648/design/2024-05-12_6f2a25075f78f.jpg"></figure>

Monarch Butterfly

Butterfly

ZGremlin

This model is updated to match the standard Youth / Intermediate sized American football. Great for kids aged 12-14 years old.&nbsp;Printed weight with Black Overture TPU was approximately 125grams.&nbsp;These balls are great for the beach! Floats and is virtually indestructible!

Pee Wee Sized Airless Football For age 9 & younger

Sports

maut3D

Failed retraction error SOLUTION!&nbsp;Problem:Filament not able to enter the AMS BUFFER, due to being stuck on an edge in the PTFE coupler.The PTFE tube inside the PTFE coupler is at a very steep angle, this causes the filament to hit the edge and get stuck.&nbsp;Solution:PTFE tube guide.&nbsp;By installing the PTFE tube guide you change the entry angle of the PTFE tube to the coupler.This avoids the filament getting stuck on the AMS Buffer, and you won't get the error anymore.&nbsp;This print supports all PTFE tube outside diameters smaller than 6mm. (Stock Bambu Lab PTFE tube is 4mm outside diameter.)&nbsp;What you need:The printed file.Rectangle magnet that Bambu Lab shipped with the printer for the printed scraper. (there should be 2 included.)(Double sided tape can be used too!)&nbsp;&nbsp;&nbsp;How to install:-Print the file (either with logo or without logo).-Stick the magnet inside the print. (Or double sided tape)-Place the PTFE tube inside the print.-Place the print on the back of the printer.-Angle the print so that the PTFE tube enters the AMS buffer horizontally.&nbsp;Edit: added support for 8x3 and 6x3 magnets!

AMS PTFE GUIDE - Failed retraction error solution

Bambu Accessories

james.h.s.brown

UPDATE: Uploaded new versions - Daffodil now split into two parts (Flower &amp; Stem) for easier multicolour printing. Also provided a long stem version. Split version has a peg for connecting together - but will likely need some glue for a secure connection. Full details below A 3D scanned real Daffodil - ready for 3d printing Scanned a real world daffodil with a revopoint Pop3, then repaired the scan and thickened it in meshmixer and then printed on my P1P. I&#39;ve then done further work in meshmixer to split the model, add connector peg and make a longer stemed version. I&#39;ve painted the model in bambu studio in 2 colours - but looks great in one colour too. Pictured print printed in bambu PLA - yellow &amp; mistletoe green 4 model files attached: -Daffodil with short stem - the original scanned flower all as one solid part-Daffodil Flower split with peg &amp; Daffodil short stem split with peg - the original model but with the flower and stem split into separate parts. Connector peg added to help connect-Daffodil long stem split with peg - as above but with the stem extended to approx 20cm 2 Print profiles provided by me:-Solid Daffodil (short stem) - The original model, painted for ams with 2 colours. Print profile is printed at 0.2mm layer height, you can increase this if you&#39;d like higher quality but beware it significantly increases flushed filament if doing multicolour.-Split Daffodil (short and long stem) - 3 print plates. One has both the short and long stem options as seperate parts (select the one you want). The two other print plates have the flower as a separate part in two different orientations. The 1st (facing up) is easier to print but has a lot of support scarring on the back surface of the flower. The 2nd is difficult to print if you have poor adhesion, better quality overall but some support marks on the more visible front of the flower. I&#39;d recommend first option. As the parts are now seperate - much easier to print in different colours, which also mean I can decrease layer height to 0.12mm for better quality If you print the split model - part should hold together with just the peg (0.3mm tolerance on the hole) - but to be sure I&#39;d recommend a small amount of super glue between the two parts. Hope people like it, and as always, any feedback welcome. If popular I may scan some more daffodil&#39;s and other flowers. Sorry for the delay in uploading the new versions - I had to improve my meshmixer skills first! If you like this you might like to check out my other flower scan models here: <a target="_blank" href="https://makerworld.com/@james.h.s.brown/collections/1001900" rel="nofollow noopener">https://makerworld.com/@james.h.s.brown/collections/1001900</a>

Daffodil Flower & Stem (3d scanned real flower)

Flowers

daniel.fiorica

Created this for Bam Bam Design&#39;s Hexagon Windmill model. It is also interchangeable with the Sunflower Windmill as well! &nbsp;The male part of the pole may need some post-processing to ensure a smooth fit. It must be printed diagonally to fit the print bed (on P1 and X1 series). I was able to fit 3 on the print bed at one time. I recommend using PETG to avoid failure while using in high winds. &nbsp;

Pole Extension for Sunflower Windmill

Windmill

Cillu

Model made by me on siemen NX, they are two pieces, which must be made on different plates. I didn't use any brims or supports, I used 0.16 as layer but it can also be made with other thickness. Container volume: 220x120x70mm.&nbsp;-&nbsp;Check out the smaller version of the tissue box <a target="_blank" href="https://makerworld.com/en/models/151747" rel="nofollow noopener">https://makerworld.com/en/models/151747</a><figure class="image image_resized" style="width:31.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/509724/2024-02-01_5ea9e5e3509c9.jpg"></figure>

Tissue Box Brick (Big version)

Misc

Akg2n

A cute little Peeps Easter Bunny magnet set. The magnets are hidden. The files are set up so that you insert the magnet with a pause at layer height. Colour swaps can be done without an AMS also using pauses and colour changes at layer height. The magnet holes are sized for 6x2mm magnets. The hole is deep enough that my printer nozzle did not pull the magnet back up. There is also a satisfying click when you place the bunny on your fridge. If you are having some trouble with your magnet coming out mid print you can try using some glue to hold it in place. I hope you like them. Please comment or post your print if you are able! Thank you.