lyhang0506

bhling

This is a Joy-Con Steering Wheel perfect for Mario Kart – the ultimate accessory to enhance your racing experience! Designed with precision and comfort in mind, this steering wheel attachment transforms your Joy-Con controllers to simulate a real steering wheel, bringing a new level of immersion to your Mario Kart gameplay.&nbsp;Easy to install, simply press the Joy-Con into the wheel, and when you're done you can easily remove it by pushing it out from the other side. The secure fit ensures that your controller stays in place throughout your intense racing adventures. The responsive buttons and accurate motion controls of the Joy-Con is seamlessly integrated into the steering wheel, allowing you to execute drifts, boosts, and jumps with ease.&nbsp;For better quality, I used PLA with PETG as the support interface, but it can be printed using only PLA. I hope you enjoy!

Joy-Con Steering Wheel

游戏

BODY3D

This waste really makes 3d printing sad ! So I created a little waste Eater to make it a little more joyful haha =)&nbsp;And of course, it is printable without supports !&nbsp;If you like these model, don't hesitate to like and follow =)&nbsp;IMPORTANT :&nbsp;If you want to sell 3D prints from my designs&nbsp;Please become a Patreon here : <a target="_blank" href="https://www.patreon.com/BODY3D" rel="nofollow noopener">https://www.patreon.com/BODY3D</a>&nbsp;Or Become a Triber here : <a target="_blank" href="https://www.myminifactory.com/users/BODY3D" rel="nofollow noopener">https://www.myminifactory.com/users/BODY3D</a>&nbsp;All my Links : <a target="_blank" href="https://beacons.ai/BODY3D" rel="nofollow noopener">https://Beacons.ai/BODY3D</a>

Waste Eater ( A1 Mini )

打印机

Eliauk

<ul><li>模型多色答打印基本都是同层多色，浪费耗材量极少，并且不需要支撑。需要一个6002轴承（图中蓝色部分），组装十分简单。</li><li>The model can be printed without any supports. It's multi-color but all on the same layer, so it won't waste materials. I printed it using PETG, so printing with PLA shouldn't be an issue at all. The model requires a 6002 bearing, which is the blue part shown in the picture.</li><li><img src="https://makerworld.bblmw.com/makerworld/draft/396787/2024-01-13_fdde45d58a57e.png"></li></ul>

美式转盘(American roulette)

必打

chiz_m

<h3>If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!</h3><h3>REVISION HISTORY</h3>2023-12-09: Added the star to the Xmas Tree profile. Thanks to todd for catching it!2023-12-03: Added platform print profile and assembly steps to the guide.2023-11-28: Added house print profile and house assembly to the guide.2023-11-27: Added Santa hat and pine tree print profiles. Updated Assembly Guide to include Christmas tree assembly.2023-11-26: Early access - Draft assembly guide released. You can start downloading and printing so you&#39;ll be ready with all the parts once the final assembly guide is released.&nbsp;<h3>DESCRIPTION</h3>This is an expansion of my <a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16767" rel="nofollow noopener">Minecraft-inspired Base/Diorama Builder</a> containing all-new blocks with new textures! Utilizing these new blocks is a Christmas house complete with a large Christmas tree and other elements for a scenic Minecraft Christmas house display!<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=b7aVa-41OhA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/b7aVa-41OhA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>ASSEMBLY GUIDE</h3>Available for download is an assembly guide showing the step-by-step assembly steps for the house, xmas tree, pine tree and candy cane.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000075526/design/2023-11-27_179f6de0d2115.png"></figure><h3>SANTA HAT</h3>Two sizes of the Santa hat are available: 1) small one that compatible with most of the mini-figure mobs that has the same size head as Steve&#39;s and 2) large size that will fit the Creeper and Enderman heads. You can download the mini-figures here: <a target="_blank" href="https://makerworld.com/en/u/3529968709/collections/31881" rel="nofollow noopener">mini-figures</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000075526/design/2023-11-27_ad77b3d0d47e5.png"></figure>&nbsp;<h3>LIGHTING</h3>To add lights into the model, I used these <a target="_blank" href="https://www.amazon.com/dp/B099NQL5KH?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">fairy lights available at Amazon</a>. The blocks are hollow and it&#39;s easy to route the lights inside. However, you may need to drill some holes or make holes a little bigger on parts that come with holes using a pin vise.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000075526/design/2023-11-27_aed46cb2da15b.png"></figure>

Minecraft-inspired Christmas House

积木

IXPatch

"Yahaha! You found me!"I love Koroks, especially the ever-tired ones that lop around with a backpack twice their size. They are charming and never fail to make me smile whenever I come across them :)There are two versions of this model: one is a hollow coin bank with a screw-lid bottom, and the other is a solid figurine. Both versions require all the supports they can get. Please ensure that your slicer places enough supports under the feet, as they are small and completely floating. They will 100% fail if unsupported. So if the automatically generated supports appear too fragile, consider using manual/paint-on supports. Personally, I printed mine with the automatically generated organic/tree supports, and they work really well on this model.

Korok Coin Bank (Zelda Tears of the Kingdom)

塞尔达

GekoPrime

I tried another spool winder but found it finicky and delicate.I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable windersWhy pick this model:<ul><li>Prints on a single build plate</li><li>Doesn't require heat set inserts or exotic hardware</li><li>Fusion and STEP files are available, remixes welcomed</li><li>Generous clearances, simple mechanisms</li><li>Designed to be a tool, not a project</li></ul>Print time:<ul><li>~500 grams of filament</li><li>~22 hours on Bambu Lab X1</li><li>~5 minute assembly</li><li>~2 minute spool transfer</li></ul>Hardware requirements:<ul><li><a target="_blank" href="https://www.amazon.com/s?k=608+bearings" rel="nofollow noopener">14x 608 skate bearings</a></li><li>A scrap of PTFE tubing</li><li>An electric screwdriver or drill with <a target="_blank" href="https://www.homedepot.com/p/DEWALT-MAXFIT-3-5-in-2-Philips-Bit-DWA3PH2MF/309474882" rel="nofollow noopener">a bit cut from ¼ inch hex stock</a> (most <a target="_blank" href="https://www.amazon.com/ITP1201-SCRWDRVNG-2IN-1-IMPAC/dp/B01LZZ7AOS/" rel="nofollow noopener">cheap quick change Philips bits</a> in the US fit this requirement)</li></ul>Print settings:<ul><li>Any. I used "0.16mm Optimal" in BambuSlicer with 5% adaptive cubic infill </li><li>Use 100% concentric infill for spindle_male_driven</li><li>Try the STLs if you have a problem with the 3mf files. I’ve added (xN) to each file name so you know how many to print</li></ul>Materials:<ul><li>Any. I used Polyterra and iiidmax PLA+</li><li>Use TPU for tpu_consumable_wiper_blade. I used Priline 98a. The wiper blades aren’t 100% required but they help keep the windings nice and tight</li></ul>Assembly and usage:<ul><li><a target="_blank" href="https://youtu.be/DxgkYDrRK-U" rel="nofollow noopener">Demo video</a></li><li><a target="_blank" href="https://youtu.be/-Hy69YwRLBw" rel="nofollow noopener">Assembly video</a></li><li>The side that says “Pastamatic" needs to face outwards, away from the spool</li><li>The filament needs to come in under the target spool, like this: O____O<ul><li>[not like this: O‾”‾”‾”O]</li></ul></li><li>The drill/driver needs to run clockwise, as though you're screwing something in</li><li>Accelerate slowly until the winder gets started</li></ul>Change log<ul><li>2023-05-28<ul><li>Initial release</li></ul></li><li>2023-05-29<ul><li>Fix a minor export glitch in "leadscrew_tooth"</li><li>Increase the number of “pin_short” instances in the 3mf from 6x to 8x</li></ul></li><li>2023-05-30<ul><li>Add a second prearranged 3mf with two plates to avoid overlap warnings</li><li>Disable autogenerated brims for the single plate 3mf </li><li>Add STLs for people who have trouble with the 3mf</li></ul></li><li>2023-06-03<ul><li>Add a ring to passive_target_cradle to prevent the far end of the target spool lifting if a user lets the the drill hang loose</li><li>Add a pin to driven_target_cradle prevent the leadscrew popping out</li><li>Fix a minor clearance issue where a dovetail didn't fit quite right</li></ul></li><li>2023-09-30<ul><li>Reduce chamfer on the crossbars to prevent them falling over when bed adhesion is poor</li><li>Add some holes to the crossbars to make them easier to screw down</li><li>Add some popular acessories to the all-in-one .3mf</li><li>Add a printable spool to the all-in-one .3mf</li></ul></li></ul>How to contribute:<ul><li>Post your make, it keeps me motivated to improve the model when I see people using it!</li><li>Post your feedback, idea or remix in the comments!</li><li>There are a few improvements and accessories in development as remixes, check those out if you‘re up for the alpha/beta tester experience<ul><li><a target="_blank" href="https://www.printables.com/model/498743-pastamatic-37-mm-motor-mount" rel="nofollow noopener">Adapter for 37mm gear motor</a></li><li><a target="_blank" href="https://www.printables.com/model/556405-pastamatic-filament-spool-winder-modifications-bra" rel="nofollow noopener">Source spool holder for 5 KG spools</a></li></ul></li></ul>Credits:<ul><li><a target="_blank" href="https://www.printables.com/@MiklosKiszely_486882" rel="nofollow noopener">@MiklosKiszely_486882</a> for the original idea</li><li><a target="_blank" href="https://www.printables.com/@PsychoShaft_33891" rel="nofollow noopener">@Psycho Shaft</a> for the drag/tensioner concept</li><li><a target="_blank" href="https://www.youtube.com/@thang010146" rel="nofollow noopener">thang010146</a> for YouTube videos of mechanical mechanisms, particularly the self reversing leadscrew for a level cable winder</li></ul>&nbsp;

游戏

打印机

必打

积木

塞尔达

卷线器