montyprints

Waffly3D

Cute Fox I modeled using Blender 4.0!Printing Multiples Will Optimize Filament Usage!View My Other Work Here! → <a target="_blank" href="https://www.etsy.com/shop/Waffly3D?ref=l2-about-shopname" rel="nofollow noopener">https://www.etsy.com/shop/Waffly3D?ref=l2-about-shopname</a>

Articulated Cute Fox

the farm thing i want

3D god

simple version of cirkul flavor organizer. 6 slots and new better version coming out soon.

cirkul flavor organizer (simple version )

circul

GlennovitS 3D

<figure class="table"><table style="border: 4px solid rgb(77, 230, 77)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints of my models. <a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">Join today - GlennovitS3D</a> - or check out my <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D" rel="nofollow noopener">model collection</a> 🗂️ and my <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D/collections/1401115" rel="nofollow noopener">popular models 🔥</a></td></tr></tbody></table></figure>Updates:<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466386/design/2024-06-13_68fab90b938e68.jpeg"></figure>13. June 2024 - New <a target="_blank" href="https://makerworld.com/en/models/494875#profileId-408895" rel="nofollow noopener">Minimals Savanna Pack</a> available! 🦓🦒🦏🐆&nbsp;Animals.. but mini… Minimals! Enjoy this first pack/collection of safari Minimals!<figure class="image image_resized image-style-align-right" style="width: 49.4%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466386/design/4df051e6-ab54-4703-909d-fe9a831e343e.gif"></figure>Perfect for your desk or somewhere else, where they can sit and maybe bring a smile when you see them.This collection contains 4 animals - but are there more coming?..<h3>Overview</h3>Say hi to your 4 new buddies:<ul><li>Elly Elephant 🐘</li><li>Luke Lion 🦁</li><li>Maddy Monkey 🐵</li><li>Chris Crocodile 🐊</li></ul>All of them comes in multiple versions:<ul><li>Single file (fx. Elephant.stl)<ul><li>Can be printed in single color</li><li>..or split to parts in slicer and printed easily in multicolor with an AMS</li></ul></li><li>Multiple files (different parts, to print in different colors seperatly and glued together afterwards)</li></ul><figure class="table" style="height: 0px; width: 0px"><table style="border: 4px solid rgb(153, 230, 77)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">More Minimals or other fun models? I got you covered! Check out this <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D/collections/1289189" rel="nofollow noopener">Minimals collection</a> - or this <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D/collections/97409" rel="nofollow noopener">collection of fun models</a> - everything from toys, to puzzles and games.</td></tr></tbody></table></figure><h3>Assembly</h3><figure class="image image_resized image-style-align-right" style="width: 50.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466386/design/202ca7b5-5c65-48e3-93b6-189be1b15386.webp"></figure>If you print the pieces seperatly (maybe to have multiple colors without an AMS), you need to glue things together. This requires a steady hand - they are small, and the pieces is really small. Now you are warned<h3>Multicolor prints</h3>This is optional - but looks nice! You can do like this (in Bambu Studio):<ol><li>Insert the single-file-version you want (fx. Elephant.stl)</li><li>Right click on the model and click on Split &gt; To parts</li><li>In the left pane Process click on Objects</li><li>Select individual parts of the model and choose filament for each.</li></ol><h3>Print instructions</h3>Here is a few ideas to get started:<ul><li>Supports: Yes - overhangs like ears requires supports. I have mine set to Automatic Organic Tree supports with a Threshold angle of 25. Worked just fine</li><li>Colors: paint in slicer</li><li>Orientation: Printing the single-file-versions - just as they come. But if printing the pieces seperatly, you need to rotate them to optimal position (and even lowering some a bit ‘below’ the printbed. This is done for you in the Bambu Studio project files!</li></ul>Happy printing!

Minimals Safari Pack (elephant lion monkey croc)

stuff i wanna print at nighttt

make 3D

Update: 29-05-2024&nbsp;Updated the design - V.2<ul><li>Raised the lower part so that the switch would not sit too high. (modified on both V.1 and V.2)</li><li>Modified the top part so the left and right buttons will be easier to press down.</li></ul>The first design is still avaliable for download.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-29_78635f1cd7cd8.png"></figure>&nbsp;<h2 style="text-align: center">Color customizable wireless computer mouse</h2>&nbsp;A color customizable shell for the Bambu Lab Wireless mouse Kit-002. Colorize it to fit your style! Each part can be colored as you wish and does not require an AMS unit.&nbsp;The model has 4 printed parts and assembly is very straight forward.<ul><li>Print time is just under 2 hours for all parts printed in one color.</li><li>Total filament usage is approximately 56g.</li></ul>For this build you&#39;ll need the following:<ul><li>Wireless Mouse Components Kit-002 (<a target="_blank" href="https://eu.store.bambulab.com/en-dk/products/wireless-mouse-components-kit-002" rel="nofollow noopener">order here</a>)</li><li>A 1.5mm allen key (the smallest one that comes with the printer)</li><li>4 x 3D printed components</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_c99c9f46d9f08.jpg"></figure>&nbsp;<a target="_blank" href="https://www.youtube.com/watch?v=mwXRenk36Ig" rel="nofollow noopener">Assembly video</a><figure class="media"><oembed url="https://www.youtube.com/watch?v=mwXRenk36Ig"></oembed></figure>Please follow these assembly instructions (Assembly time is approx 5 minutes) Remove any support material before you start to assembly.  Support is used on the lower housing for the 5 screw bosses and the 4 feet indicators.&nbsp;1. Install the laser lens and the switch slider (IMPORTANT: make sure that the switch slider has the same orientation as the position of the switch on the PCB - also make sure that the laser lens is oriented according to the PCB.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_246e0e1865fa08.jpg"></figure>2. Insert the mouse wheel to the PCB and install the PCB into the lower housing of the mouse. Please check if the wheel moves freely. If not push it to one or the other side untill it runs smooth.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_17aa200096a17.jpg"></figure>3. Secure the center button part in place while securing it with one screw from beneath the lower housing.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_cfcda4ab567108.jpg"></figure>3.1 Make sure the center button is straight and that the wheel does not grind against the sides. If it does, then gently turn it the the centered position.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_4977d053c52418.jpg"></figure>4. Install the plus and minus metal terminals as seen on the picture below. Gently squeeze the cable into the guide. Support it with a finger from beneath and be carefull not the break the part as it can be brittle due to the thin wall.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_d9369d842e914.jpg"></figure>5. Install the top housing. Make sure no cables are being crushed.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_605450cf99139.jpg"></figure>5.1 make sure that everything is straight and flush before moving to the next step.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_2a7d26d53e115.jpg"></figure>6. Secure the top housing with 4 screws as seen on below picture. the top housing will hold the PCB in place. Check if the buttons work/click as intended.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_7d036dbcb4f7c8.jpg"></figure>7.1 Insert a battery and the USB bluetooh dongle.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_d937e924009608.jpg"></figure>9. Lastly we need to install the 4 feet.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_7f8b099a2c986.jpg"></figure>10. Enjoy your very own personalized 3D printed mouse.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_4a637dac92783.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_e6cdc9c64ea4d8.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-21_ac912f074998c8.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-22_52dfcb0d4908a.png"></figure><h3 style="text-align: center">I would love to see what designs you come up with, so please share photos of your colorful prints! </h3>1995 VW Polo Harlekin Design <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471646/design/2024-05-22_a36ae6bbe5283.gif"></figure>&nbsp;My mouse shells are printed with these filaments:Bambu Lab PLA Matte Lilac PurpleBambu Lab PLA Matte Lemon YellowBambu Lab PLA Matte Sakura PinkBambu Lab PLA Matte Ash GreyBambu Lab PLA Matte Ivory WhiteBambu Lab PLA Basic BlackBambu Lab PLA Matte Latte BrownBambu Lab PLA Matte Dark BrownBambu Lab PLA Basic Orange&nbsp;LicensingAll my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.&nbsp;How to Support MeIf you like my designs, please give them a ‘like’ as this helps the model being more visible to other users.Also please consider donating via <a target="_blank" href="https://www.buymeacoffee.com/make3d" rel="nofollow noopener">https://www.buymeacoffee.com/make3d</a>  All support is highly appreciated!&nbsp;

Wireless Color Customizable Mouse

mose

isugradbellah

The perfect size for a countertop or desk, measuring ~4.5" around and 9" tall, you can enjoy this just about anywhere! Utilizing a ball jar, fill it with whatever candy you wish, spin the dispenser onto the glued in threads for the jar, and you are set for fun! We recomend printing in PETG, which is a little more food safe!

Candy Dispenser 

candy stuff

3dprinterman

I started off making a rack for some Altoid tins I had collected over the years. I soon ran out of tins. So I printed some. Then I realized that a package of screws from Home Depot holds just a little too many screws to fit in the tins. So I made a rack that holds three tins instead of four. The new tins are slightly taller. And just for completeness, I made a rack that holds 2 tins.All the racks are the same height and width and they all have nesting feet and dimples so you can stack them.My workbench is now a lot cleaner.

Altoid tin Organizer

altoids 

quannm9420

tế bào+massage tay

idk 💅💗🤓☝️

ntalekt

These make perfect gifts for teachers and even have a little space on the bottom to add a little text.I remixed JBakutis's original Apple using Fusion 360 to reduce the mesh, make to bottom solid, reduce the height, and a few other tweaks.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/234044/2023-11-30_4xqooiqmcpz8.png"></figure>Printed at 0.16mm layer height on my BambuLab P1P using<ul><li><a href="https://amzn.to/40ZPuNe" rel="nofollow">PolyTerra Matte Lava Red PLA</a></li><li><a href="https://amzn.to/47ZTy2x" rel="nofollow">PolyTerra Matte Forest Green PLA</a></li><li><a href="https://s.click.aliexpress.com/e/_DDHWrSx" rel="nofollow">Bambu Textured PEO build plate</a></li></ul>

Apple with stem

teachers

EDDIEB3D_

Create your own suspended String Art TEXT! Created this base for those who want to create their own. Not limited to text, you can add any STL in the middle just make sure to follow the steps in the how to video here: <a target="_blank" href="https://www.tiktok.com/t/ZTLr3m69X/" rel="nofollow noopener">https://www.tiktok.com/t/ZTLr3m69X/</a>&nbsp;

Create Your Own String Art (Rectangle)

string art

sgenos

Here is a jewellery holder to store your rings, earrings and other jewellery.&nbsp;easy to print, no support required

Jewelry holder

holders

poop

A1 Graphix

2024 Solar Eclipse - Indiana - Large Coin - Coaster - Badge - SouvenirPrints Face down for highest qualityScale up or down to fit your needs&nbsp;Please be sure to rate this when you print it. Thanks!Check out my other designs here: <a target="_blank" href="https://makerworld.com/en/@A1Graphix" rel="nofollow noopener">https://makerworld.com/en/@A1Graphix</a>

2024 Solar Eclipse - Indiana - Coin Coaster Badge

eclipse 

Lars

Discover the beauty of this 3D printed Voronoi flower in full bloom. The combination of natural elegance and geometric perfection, the playful lightness and sublime elegance of the model fit perfectly into any ambience and invite you to marvel.&nbsp;Printing is done without supports.&nbsp;Enjoy the unique design of this modern Voronoi flower or give it as a gift for a special occasion.have fun printing.

Voronoi flower

Flowers

Baze

update lock and comb,fully printable,no spring need.&nbsp;<ul><li>lock / large lock: choose one , print in petg better.</li><li>lock / large lock: 选择一个，我使用的petg</li><li>pins: scaled down to 95% on x and y.（done in 3mf）</li><li>pins: 所有的插销原始比例会比较紧，在打印配置里x和y方向都缩放到了96%</li></ul>update 2024/03/30:Fixed the comb and lock files and merged them into one<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV171421U7xq/?vd_source=b37c0642f08028c916e55ff848a9a20b"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV171421U7xq&amp;autoplay=0&amp;poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV171421U7xq&amp;autoplay=0&amp;poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Folding comb V2 Fully Printable

Geek Genius Collective

Chiefs Lightbox for your collection. Pretty easy print, I kept it to three colors while using the white thickness in places to give it a gray look when lit up. Like usual be sure to heat up your nozzle and clean any old filament that is stuck to it before sending the print. On the back there is a negative cube you can move and scale to your liking. Filament used for the test print was all bambu basic PLA, red, white, black. Enjoy and Happy Printing!

Chiefs Lightbox

$$$$ prints

royeiror

My nieces asked for more Lucky 13 dummies and I wanted to design some accessories for them, and my previous model was not very good looking, so I went and found a better hard hat (https://grabcad.com/library/hard-hat-fakey) that I couldn't set as a remix. So here is, a new and better version of the Lucky 13 Dummy hard hat.

Lucky 13 Dummy Hard Hat

Dummy

mipmay3D

Nice KC Coaster perfect for that mancave. Coaster is 95mm diameter, 4mm thick. Print on textured plate face down. 0.4 nozzle, Wall generation Arachne, PLA, AMS. NOTE: I do not own the rights to the logo in this model, and it is designed as fan art. This is not intended for commercial use.

Kansas City Chiefs Coaster

Ghosty

I work in a metal shop and found myself knocking my tumbler over a lot so I made a magnetic base for it. i used 10mmx3mm magnets off amazon and glued them in place. It works pretty good sometimes too good and can be hard to lift. I also use in in my k5 Blazer that has no cup holders or carpet and i just stick it to my floorboard.

Magnet Mount For Milwaukee Packout Tumbler

Milwaukee

mono

Low Poly Frog, based on the tree frog demo by Zbrush Pixologic.&nbsp;If you like frogs and voronoi, check out my take on a voronoi tree frog:<a target="_blank" href="https://makerworld.com/en/models/236165#profileId-258274" rel="nofollow noopener">Voronoi Tree Frog</a>

Low Poly Tree Frog

Print on MINI

OwenTF

This is my gravity utility knife design. I also made a toy blade if you just want to use it as a fidget toy. If you enjoy the design a like or make would be appreciated.&nbsp;Check out my new Banana Switchblade <a target="_blank" href="https://makerworld.com/en/models/480959#profileId-392609" rel="nofollow noopener">here.</a>You can find my other toy knife designs <a target="_blank" href="https://makerworld.com/en/@OwenTF/collections/608169" rel="nofollow noopener">here.</a>&nbsp;Thanks to FormFutura for providing the High Gloss PLA ColorMorph filament used in this post. I especially like the red and black color morph. You can get some for yourself by clicking <a target="_blank" href="https://formfutura.com/product/high-gloss-pla-colormorph/?aff=6" rel="nofollow noopener">my affiliate link</a>.&nbsp;You can obtain a commercial license to sell prints of this <a target="_blank" href="https://www.printables.com/@OwenTF_1791221#join:894" rel="nofollow noopener">here</a>. Instructions - I recommend printing in a resolution between 0.2mm and 0.1mm - The only part that needs supports is the handle. - The video below shows how to assemble the knife. - When assembling the knife it is important to note the orientation of the flexing slider. Its sides are slanted so it only works in a specific orientation. - I would strongly suggest using a lubricant on the flexing slider. It will work without lubricant but its action is much smoother when lubricated. - The threading on the screw is (M8x1.25) and the threading on the knob is (M5x0.8). - If the threading is too tight try printing the screw and knob individually or scaling them down in the x and y direction.&nbsp;Hardware - x2 4mm M3 screws, specs linked <a target="_blank" href="https://www.mcmaster.com/91292A109/" rel="nofollow noopener">here</a> - x2 M3 nuts, specs linked <a target="_blank" href="https://www.mcmaster.com/90592A085/" rel="nofollow noopener">here</a> - x1 utility blade&nbsp;Printing Orientation<figure class="image image_resized" style="width: 57.86%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000194754/design/2024-05-30_1f1edc31d9cfa.png"></figure>&nbsp;&nbsp;Disassembled Parts<figure class="image image_resized" style="width: 58.49%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000194754/design/2024-05-30_f63e6febdce118.jpg"></figure>&nbsp;&nbsp;Uncut Assembly Video<a target="_blank" href="https://youtu.be/tknsiIjpArY?feature=shared" rel="nofollow noopener">https://youtu.be/tknsiIjpArY?feature=shared</a>

Gravity Utility Knife

Garrett

2emme3dlab

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Eryone Black Transmission Distance: 5 PLA Eryone Red Transmission Distance: 5 PLA Eryone White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Red At layer #12 (1.04mm) swap to White for the rest.

Deadpool HueForge

HueForge

Ken Mills

A perfect addition to keep an eye of the time while watching prints. I have a wall clock near my printers and decide to see if I could create coordinate with my printing space. This clock is the same size as Bambu's reusable spool and features a customizable label and faux filament.&nbsp;For the clock mechanism, I used a common quartz movement with a shaft long enough to fit the 3.5mm faceplate. These movements and hand assortments are quite cheap on sites like Amazon (<a target="_blank" href="https://www.amazon.com/gp/product/B09DSM7NYK" rel="nofollow noopener">example</a>). I settled for simple hour and minute hands that are 55mm and 90mm respectively.&nbsp;The spool, text, hour marks and center hub cover are all separate objects making color adjustment easy. While the text can be changed, I've found Bambu Studio's text tool is finicky so be careful (and patient).&nbsp;The filament ring can be printed in your favorite color and material but is entirely optional. If the fit is too loose simply scale the part a bit or add a few drop of glue.&nbsp;Please feel free to reach out if you have any problems, need adjustments or have suggestions!&nbsp;Based on legacyofbob's nice hex remix of Bambu Lab's reusable spool.

Bambu Spool Clock

Clock

Golub17

Update  I have accepted all valid criticisms of the stem model. Even though I tried to make the branches thicker and tested many types of supports, it was not enough. Therefore, I made a new remixed model with my own self-modeled leaves. These are printed on the bed (unlike the old ones in the air) and positioned afterwards using heat.I would like to thank you all for printing, sharing your pictures, and commenting. Now, let me address the licensing and give proper credit to the original creators: Rose (original) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/marsmathofficial" rel="nofollow noopener">marsmathofficial</a> on Thingiverse and published under CC BY-NC-ND 4.0 DEED, which means the model can be shared and distributed in its original form. DO NOT SHARE REMIXED VERSIONS OF THIS MODEL I am also sharing the original model; therefore, I am still respecting the CC BY-NC-ND license the original creator chose. Stem (remixed) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/richardtracy" rel="nofollow noopener">Richard Tracy</a> on Thingiverse and published under CC BY 4.0 DEED which means the model can be shared and distributed in its original form or remixed. Base (original) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/richardtracy" rel="nofollow noopener">Richard Tracy</a> on Thingiverse and published under CC BY 4.0 DEED which means the model can be shared and distributed in its original form or remixed. Vase - That's mine, made through MakeMyVase on MakerLab, nothing extra about it. Printing and processing instructions: Rose - should print as it is, i personally like the silk pla look. ;New updated stem (flat leaves) has no printing issues; Stem (old) - this is a tricky one, in an older post here by erin.wang, many had issues printing it. My remix addresses some of these by making the leaf stems thicker and painting custom supports, also, the stem is now longer and looks better in a vase. Print profile has fuzzy modifiers on leaves i personally like them that way. Print instructions: - use high-quality filament, which will prevent 90% of problems - if you encounter any issues, manually set the print speed to 50% (this gives layers more time to cool down) Post process instructions: 1. very carefully remove supports, start by small pieces from leaves and work your way down to the stem 2. carefully trim any excess material  3. use heat to remove stringing (i used a cheap filament your results may be better) and carefully heat the branches under leafs 4. pose leaves to a more natural position while the branches are heated Base - should print as it is, i personally like the fuzzy look. Now something about the rose model, i made myself one modification to it. And that is the hole at the bottom so the final gluing would be easyer. Sadly i cannot share this model with you here or anywhere since the original creator forbids sharing of a remixed model. But i can give you quick instructions on how to do it yourself, that far CC BY-NC-ND cannot reach. 1. Export the model from bambu studio (File - Export - Export all objects as STL) 2. Import in Blender (File - Import - STL) 3. Go to edit mode 4. Select the inner most ring on the underside (use select circle an maneuver around) 5. Press “S” to scale down (move your mouse to scale, click to confirm) 6. Press “E” to extrude (move your mouse to extrude, click to confirm) 7. Export the model from blender (File - Export - STL) 8. Add model to the bambu studio in the original rose profile Even better solution by <a target="_blank" href="https://makerworld.com/en/u/2175230856" rel="nofollow noopener">@tweaqr</a>In Bambu Studio Right click on the rose --> Add nagitive part --> cylinder Click OK to the message box Select Scale from the top toolbar and set the size to 4mm,4mm,4mm Select Move from the top toolbar and set the position to X 0mm, Y 0mm, Z-15mm

Rose with Stem (remix)

PET-G Translucent

ESPN8_TheOcho

Display your Benchy's on your multiboard with this peg mount. Has a small notch so it can hold on to the benchy so they don't slide off accidentally if bumped etc.

Multiboard Benchy Display Peg

Multiboard

halil_d

Benötigt werden 2 stück 4x40mm spax schrauben

AMS Lite Wallmount Bambulab A1 Mini 

A1 Mini Stuff

3DMN

Desk Lamp 001 E14 socket/cable Lampshade without central hole <a target="_blank" href="https://makerworld.com/en/models/138476#profileId-150819" rel="nofollow noopener">https://makerworld.com/en/models/138476#profileId-150819</a>&nbsp;<h2><a target="_blank" href="https://makerworld.com/en/models/191724#profileId-211691" rel="nofollow noopener">New Desk Lamp 002</a> <img src="https://makerworld.bblmw.com/makerworld/draft/551134/2024-02-18_e615e262c81b1.png"></h2>

Desk Lamp 001

lamps

DesignCraft

DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.&nbsp;The Overture v2 print profile is the original print profile updated with a new model. It's a redesign based on user feedback and also uses about 40% less material. Please refer to the Disclaimer above and also please read the Considerations section below.&nbsp;Description:&nbsp;This adapter system wraps the edges of an OVERTURE 1kg 199x66mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>OVERTURE nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print this model twice for a single spool</li><li>Affix one spool ring adapter on each side of the OVERTURE spool</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

OVERTURE Bambu Lab AMS Cardboard Spool Adapter Ring

spool Rings

izboxo

Don't you hate mess on your table? This will solve one of your problems.&nbsp;MagSafe version. <a target="_blank" href="https://makerworld.com/en/models/229007#profileId-246518" rel="nofollow noopener">Here</a>&nbsp;You can find supported watches inside print profiles.&nbsp;<img src="https://cezarsalat.eu/watch.gif"><img src="https://cezarsalat.eu/watch3.GIF"><img src="https://cezarsalat.eu/mount.GIF">-------------------------------------------What you will need.<ul><li>4x 3x25mm Screw</li><li>Or print Double sided tape mount. And use tape.</li><li>Basic skill in screwing</li></ul>-------------------------------------------&nbsp;

Table Watch Charger Holder

PRINT NEXT (remove once printed)

3D Funny

T-Rex Kit Card 

craft fair

JamesThePrinter

These Easter eggs are larger than normal. Actually, they are about the size on an emu egg! I would suggest that you choose 1-3 eggs and display them together. Adding extra eggs printed at varying scales can also look very nice. I have successfully tested them down to 25% scale with the exception of the Lattice Egg. The lattice is a retraction nightmare at smaller sizes. They should scale upwards without issue as well, but beware - they are pretty large already!&nbsp;Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.&nbsp;Print SettingsBecause of the size, these eggs take a while to print. I found that I could speed up that process by limiting infill to critical areas only. Most of the examples above were printed at 0.2mm layer heights.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>MatterHackers Quantum Blue Raspberry PLA</li><li>MatterHackers Quantum Green Raspberry PLA</li><li>MatterHackers Quantum Blue Yellow PLA</li><li>MatterHackers Quantum Blue Green PLA</li><li>MatterHackers Quantum Silver Gold PLA</li><li>MatterHackers Quantum Pink Purple PLA</li></ul>

XL Easter Eggs

Easter

Prevo3D

Model of a real world house named “Marta” in my town.STL files are with real world dimensions, you need to scale them down to 20% if you print them individualy. • For windows I would suggest 19.50% scale just to be sure they will fit properly, same applies for doors.• Windows are printed in combination with black and transparent filament. Best way is to make only 1 bottom layer, and no infill, no top layers. That way it will be just like windows, transparent.• For roof I suggest to print it on its side and just make it hollow, with 0% infill, no need for infill on the roof, just make 3-4 walls.• Roof part 1 and part 2 needs to be glued together• “Joiner” (3pcs) needs to be glued just to the hole on the walls&nbsp;Hope you will have fun assembling this house :)&nbsp;

House "Marta"

Toys 🤷‍♀️

GCdesign3D

<h2>Lock Pick Kit Card:</h2><h3>Introducing the Lock Pick Kit Card - your portable solution for lock picking 🔐</h3>This innovative tool combines the convenience of a credit card-sized design with the functionality of a comprehensive lock picking kit.Designed using Fusion 360, this sleek and compact card is perfect for slipping into your wallet or pocket.&nbsp;<h3>Features:</h3><ul><li>Ultra-thin design: Measuring just a few millimeters thick, this card easily fits into your wallet or pocket without adding bulk.</li><li>Durable construction: Make it with high-quality materials like PETG to ensure long-lasting durability and reliability.</li><li>Versatile tools: Includes a variety of lock picking tools such as tension wrenches, hook picks, rake picks, and more, allowing you to tackle a wide range of locks with ease.</li><li>Perfect for learning: Ideal for beginners looking to master the art of lock picking, this kit provides all the essential tools needed to develop your skills and understanding of lock mechanisms.</li><li>Interactive stress-relief: Transform lock picking into an engaging and interactive stress-relief game, providing hours of entertainment while sharpening your dexterity and problem-solving abilities.</li><li>Portable and discreet: The discreet design of this card allows you to carry it with you wherever you go, making it ideal for locksmiths, hobbyists, emergency situations, and everyday use.</li></ul>Whether you're a seasoned locksmith or a beginner enthusiast, the Lock Pick Kit Card is the perfect addition to your tool collection. Unlock new possibilities and conquer any lock with ease.&nbsp;<h3>Recommended Materials:</h3>PETG or PLA;Preferably PETG at least for tools to ensure greater strength, but PLA is just as good.<h3> Print Mode:</h3>Use my provided .m3f template if possible (on print profile choose the one that says "DESIGNER"). This model is already configured for best printing results.&nbsp;<h3>Orientation and Support:</h3>The object can be printed entirely on a single plate on most printers (except for A1 mini). This model does not need supports.&nbsp;<h3>Additional parts:</h3>I bought the trasparent lock on aliexpress, here is the <a target="_blank" href="https://it.aliexpress.com/item/1005005140429598.html?channel=twinner" rel="nofollow noopener">product page</a><h3>You can also customize the colors and the top part with your own text and, here's how:</h3>Disclaimer: the tutorial is a bit long because many things are explained in detail to allow even those who have never used bambu studio to be able to customize the object.&nbsp;- Step one, click on the first print profile (the one with DESIGNER text) and open it on BambuStudio.&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/630782/2024-02-21_fe987ce8de177.png">&nbsp;&nbsp;- In the Process tab click on “Objects” and then on “V4.stl_6”.&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/630782/2024-02-21_4a5419f690b64.png">&nbsp;&nbsp;-Click on "rotate" command on the top bar and rotate the object by 180° in the Y axis (green circle).&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/630782/2024-02-21_0ebbc9b6471a4.png">&nbsp;&nbsp;- Select “Color Painting” on the top bar and click on “Erase all painting” (if you can't select color painting is because “v4.stl_6” need to be selected).&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/630782/2024-02-21_74c62a97ed9eb.png">&nbsp;&nbsp;- Select “Text shape” from the top bar, input your own text and copy the settings from the image below (you can modify font and the size if your text does not fit on the face).&nbsp;<h3>tip: click and keep pressing left mouse click to move your view.</h3>&nbsp;- Move your cursor on the object and by left click you can embeed your text in the top model face, you can also use the purple dot to move the text after you place it.&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/630782/2024-02-21_3f8fa5871c852.png">&nbsp;&nbsp;- Now return on the Object panel > Right click on “text_shape” > change type > select “Modifier” >press “Ok” > Right click on “text_shape” > change filament >select the color you want to use for the text&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/630782/2024-02-21_05fdc13ff52a9.png">&nbsp;&nbsp;- Rotate again the object by 180°- Slice the plate and print&nbsp;&nbsp;༼ つ ◕_◕ ༽つ Enjoy your custom KIT ༼ つ ◕_◕ ༽つ&nbsp;Here is mine:&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/630782/2024-02-21_43d700232f39.jpg">&nbsp;&nbsp;I hope you find this design both useful and enjoyable to print! Your feedback helps me improve this design even more. Feel free to share your thoughts below, enabling me to enhance it even further! 😊✨&nbsp;&nbsp;&nbsp;<h3>Check out my other designs by clicking into my profile, here are some examples:</h3><ul><li><a target="_blank" href="https://makerworld.com/en/models/223227#profileId-241227" rel="nofollow noopener">Tiny Bookmarks Kit Card</a></li></ul><a target="_blank" href="https://makerworld.com/en/models/223227#profileId-241227" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/630782/2024-03-04_c6a4c48eb1b28.gif"></a><ul><li><a target="_blank" href="https://makerworld.com/en/models/201327#profileId-221704" rel="nofollow noopener">Customizable Sd / Micro Sd Card Kit</a></li></ul><a target="_blank" href="https://makerworld.com/en/models/201327#profileId-221704" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/630782/2024-02-25_b7604b4f97ccc.gif"></a><ul><li><a target="_blank" href="https://makerworld.com/en/models/177338#profileId-195027" rel="nofollow noopener">SpotyHeart, the customizable Spotify Code Keychain:</a></li></ul><a target="_blank" href="https://makerworld.com/en/models/177338#profileId-195027" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/630782/2024-02-23_315990665caa2.webp"></a>&nbsp;

Lock Pick Kit Card (customizable design, read description)

pop cards

Madness3D

Optimized for 3D printing with a amazing depth of field.&nbsp;The Glowing series is optimized with 2 filaments for the most popping effect when matched with glow in the dark filament.&nbsp;It can be printed with either glow in the dark filament or with plain bambu lab green filament (without the glow in the dark effect)..&nbsp;There are 2 print profiles available.200x200 is optimized for x1c, p1s, p1p150x150 is optimized for A1 mini.&nbsp;Pictures can be printed with out AMS by following the print instructions below.&nbsp;&nbsp;&nbsp;&nbsp;Art generated with midjourney and optimized for 3D printing with Hueforge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 5.4 PLA BambuLab Basic BambuLab Green Transmission Distance: 12Swap Instructions: Start with Charcoal At layer #11 (0.96mm) swap to BambuLab Green for the rest. &nbsp;

"Glowing" - The Grinch

GLOBRO

VRsculpts

The baby version of Garfield from the upcoming moving. This is from the part in the trailer where Jon meets Garfield for the first time and asks him “you hungry little guy?”&nbsp;Prints in place with no supports. Profile is set up to purge to infill with prime tower disabled, with a flushing volume multiplier of .6, I have found this to provide good print quality with least amount of waste. Printed on my A1 mini at .2 mm layer height which keeps the print time down. If you have more than 1 AMS you may want to print his snout yellow or a lighter shade of orange (fill bucket with edge detect turned off).&nbsp;Join my Patreon if you would like to sell physical copies of my designs, your support is appreciated and motivates me to create more cool stuff to share! https://www.patreon.com/VRsculpts

Baby Garfield (The Garfield Movie 2024)

MOVIE STUFF

Classic 2.5

*12-15-2023* Included A1 Mini 160mm Version &nbsp;*10-19-2023* Made it more stable and removed tiny dots. Included 120mm Profile.&nbsp;*10-18-2023* Added 240mm Version&nbsp;Just a small rebuild of a shelf I own using Blender and fSpy.Fully scalable, well combineable.240mm, 160mm and 120mm Profiles included.All Profiles without Brim.For even more stregth increase infill and/or Number of Walls.&nbsp;Resize as you see fit. It should almost always print perfectly without any support. Combine some of them, play with sizes and share…

Shelf for Minis

book stuff

T3D Objects

Little flower shaped tray for jewelry, perfume or anything you would like!

Flower tray

✌️ preppy 🎀

GiskardReventlov

I needed a simple and lightweight front cover to protect the joysticks and the screen when traveling light, so I made one.Two versions: partial front cover (this one), and a full front cover (<a target="_blank" href="https://makerworld.com/en/models/18977" rel="nofollow noopener">link</a>).<figure class="image image_resized" style="width:64.74%;"><img src="https://makerworld.bblmw.com/makerworld/user/3569911020/draft/2023-09-24_461730793ddc2.jpg"></figure><a target="_blank" href="https://makerworld.com/en/models/18977" rel="nofollow noopener">FULL FRONT COVER COVERING ALSO THE FRONT CORNERS CAN BE DOWNLOADED HERE</a><ul><li>Prints as a single piece in the P1P and X1C (and any larger printer)</li><li>Very light, weights only 50g printed!</li><li>Smooth corners to not snag into other stuff when thrown in a backpack</li><li>Very thin, can flex slightly to fit snugly around the deck</li></ul>If you prefer a looser fit, increase the width by 1mm. That is, the widest measurement (leave height and length the same). The standard model has a very tight fit and need some flex to install and remove.&nbsp;I tested in PLA and PETG. PETG fits as well and is more flexible, but the finish is worse due to the supports.&nbsp;Supports required. I can print with only a few supports depending on angle, but there aren't many choices given the size and complex shape. If you can print without supports on a larger printer, let me know! Must be positioned diagonally on the bed to fit on the P1P and X1C:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/user/3569911020/draft/2023-09-24_5c31de832c028.jpg"> <img src="https://makerworld.bblmw.com/makerworld/user/3569911020/draft/2023-09-24_95686b3340795.png"><figure class="image image_resized" style="width:48.72%;"><img src="https://makerworld.bblmw.com/makerworld/user/3569911020/draft/2023-09-24_29e2efc1767df.png"></figure>

Steam Deck lightweight front cover - protects joysticks and screen (partial cover version)

SteamDeck

Crafty Sven

Snowman to top your LED lamp kit for Christmas.For the best effect, use colors that are opaque or translucent ! ☃️&nbsp;Please print the base from the original link, or use the one you have already.&nbsp;

Snowman for LED Lamp 001

LED lamp kit

neil3dprints

Bambu Mate P1S ( AMS Version )&nbsp;Update 23/09/2023&nbsp;I have removed the original 3MF file and split the parts against four profile 3MF's. As this model requires more than four colours, as soon as the fifth colour is reached for printing, this has caused some people issues. Please print the four new profile 3MF's and refer to the images for assembly. Any problems please leave a comment and apologies for any inconvenience.&nbsp;Do you love your 3d printer so much, that you'd wish you could print a miniature caricature of it? Well…. you welcome. :-)Now, I should point out a number of the parts do take advantage of the AMS system. If you do not have a AMS, then, like… why not?And… YOU WILL NOT BE ABLE TO PRINT THIS!!!&nbsp;I printed all the parts at 0.16mm layer height.A number of the parts will require gluing together. Please refer to the images to see what order to attach the parts together.&nbsp;If anyone has any questions or queries, even if you might think it is a stupid question, seriously, just ask me. Send me a DM through MakerWorld and I will get back to you ASAP. I want people to be able to print this. So if anyone is having any problems, just reach out. I'll be happy to help where I can.If you want to stay up to date with anything I am working on and are perhaps interested in other projects I have in development, please check out my instagram or Twitter.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><a target="_blank" href="https://twitter.com/NHengist" rel="nofollow noopener">https://twitter.com/NHengist</a>&nbsp;Happy printing everyone,

Bambu Mate P1S ( AMS Version )

LONGGG ✌️

Meister Edel

Cable Ties to be printed with flexible materials like TPU.The sizes are:<ul><li>90 mm</li><li>110 mm</li><li>130 mm</li><li>150 mm</li><li>170 mm</li></ul>I printed the mounts in PLA - 3 Perimeter 20% Infill 0,2 mm layer height. But ASA or PETG will be a better solution for the long run if you place heavy things on the holder.&nbsp;Have fun and keep printin!&nbsp;

Cable Tie TPU

Wing-Art

Be captivated by the timeless elegance of our Ribbed Vase. Defined by its pronounced vertical grooves set against the smooth contours of its organic shape, this vase creates an intriguing interplay of light and shadow, offering a visual and tactile experience.&nbsp;Available in two standard sizes, this model seamlessly integrates into any setting, from the cozy confines of a living room to the expansive openness of a lobby. Its freely scalable features allow for personalized adjustments to the vase's proportions, ensuring a perfect fit with your spatial concept while maintaining the integrity of its design.&nbsp;Whether as a standalone piece of art or as part of a stylish ensemble, our Ribbed Vase promises to be a focal point, poised to become the central element of any room composition.&nbsp;__ Lassen Sie sich von der zeitlosen Ästhetik unserer Rillenvase verzaubern. Mit ihren ausgeprägten, vertikalen Rillen, die sich kontrastreich gegen die sanften Konturen ihrer organischen Form abheben, bildet diese Vase ein spannendes Zusammenspiel aus Licht und Schatten, was sie zum optischen sowie haptischen Erlebnis macht. &nbsp;Das Modell präsentiert sich in zwei Standardgrößen und fügt sich nahtlos in jede Umgebung ein – sei es der behagliche Rückzugsort eines Wohnzimmers oder die repräsentative Weite einer Lobby. Dank der frei skalierbaren Eigenschaften des Modells können Sie die Dimensionen der Vase individuell anpassen, um eine perfekte Harmonie mit Ihrem Raumkonzept zu erzielen, ohne Kompromisse bei der Designqualität eingehen zu müssen. &nbsp;Als singuläres Designstück oder im Verbund mit anderen Objekten, setzt unsere Rillenvase kunstvolle Akzente und verspricht, zum zentralen Element jeder Raumkomposition zu avancieren.

Zen Oasis Vase

Vase

Vondráček Ivan

Arrma infraction wing

RC stuff

tapia3d

5 Ring Tray Display, super easy to print just print it with a brim to keep from warping, no supports needed.

5 Ring Holder

holders 💋🌹💝

Scott-3d

Cat ring for cat lovers. Please rate. Cat ring can be resized in slicer. Also please boost

Cat ring

jewelry 🫶

Tygahhhh

Hello! Do you have some chapped lips? Do you want your lips to be supple before suckling on your stanley cup? Well boy do I have the print for you! Behold! the Chapstick handle mod for your Stanley!

Stanley Cup Chapstick Handle

Stanley cup accessories

palumbus

Door Corner Flower

momma 🌹

t147caddy

Just a quick simple flag to add to your Benchy's.&nbsp;&nbsp;Make sure to print with a brim if you don't use my profile.

Benchy Flag with Bambu Logo

benchy things

BODY3D

Fidget Flower

fidgets 🤩

squinn

A cute little baby turtle that looks great sitting up on two legs, standing on all four, or just laying down to get some rest. This is an easy print-in-place that has been carefully designed to require no supports, and (at just 6 cm long) it's a fun size that only requires 14 grams of filament and prints quick.

Cutie Baby Turtle

animals 🫶🫶

cyanidesugar

Did you, or someone you know miss out on Taylor's 1989 cardigan drop? Or maybe you felt like it was overpriced for a simple cardigan? Well, look no further! &nbsp;A 3D printed version of the cardigan is here - just don't try to wear it! Print this for those having FOMO, or if you want to play a prank on your favourite Swiftie! You can resize this print (though some of the details might get lost the bigger you scale it. Only resize the X and Y dimension, however. Do not scale the Z height. &nbsp;Filament Swaps:&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm&nbsp;Filaments Used: - PLA Kingroon Black Transmission Distance: 0.4 - PLA META Sunlu Teal Transmission Distance: 5.4 - PLA Kingroon White Transmission Distance: 8&nbsp;Swap Instructions: - Start with Black - At layer 1.00mm swap to Teal - At layer 1.32mm swap to White for the rest.&nbsp;&nbsp;

Taylor Swift 1989 Cardigan - Hueforge Print

taylor swift 

Arnauz

A pot to hold pen extruding nozzle sculpture

Pen holder 3D Printing Nozzle

Desk Stuff

Lebofly

Mount your Ikea skadis on the side of your P1S &amp; X1C - Just remember to print out a Ikea skadis board to mount&nbsp;Slightly improved design to fit any smaller gaps

Ikea Skadis P1/X1 Mount - Improved hook design

P1S Accessories

You can print a boring static trophy - OR you can print this one! It’s fun, new and unique! It prints in place, and spinslike the popular Tactile Fidget Rings right of the buildplate! And that allows it to be posed in creative positions on the stand - including a more flat traditional position. Enjoy the special look on the shelf!<figure class="image image_resized image-style-side" style="width:36.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/695363/2023-12-21_df85df8e76ab18.gif"></figure><h2>Overview</h2>The medal part of the trophy comes in multiple versions. For now it comes in these versions:<ul><li>1st (first price!)</li><li>Star</li><li>Blank (you can add custom text/icons in Bambu Studio or Prusaslicer)</li></ul>(If you searched for another icon/text, and dont want to customize it yourself, please leave a comment - and ill consider adding it to the collection here)<h2>Add custom text</h2>Here is how to add custom text to the medal (in Bambu Studio):<figure class="image image-style-side image_resized" style="width:31.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/695363/2024-03-13_28a7b68cac35d.png"></figure><ol><li>Import the Blank version to the buildplate</li><li>Select the Medal</li><li>Click the Text button in top right (T)</li><li>Write the letter/word in the Input Text field</li><li>Set the Thickness to 3 mm</li><li>Click on the Medal where you want it placed</li></ol><h2>Edit custom text</h2>Here is how to edit custom text on the medal (in Bambu Studio):<ol><li>Click on the Fidget Medal with the ‘Custom’ text on</li><li>In the side-panel on the left, click on Objects (next to Process / Global)</li><li>Expand the Fidget Medal - Blank by pressing the little arrow </li><li>Right click on text_shape and press Edit text</li><li>Adjust text and size to your liking</li></ol><figure class="image image_resized image-style-side" style="width:37.48%;"><img src="https://makerworld.bblmw.com/makerworld/draft/695363/2023-12-21_c5843e56b8db38.gif"></figure><h2>Assembly</h2>None! The medal prints in place flat on the buildplate, and is ready to place on the stand - no glue needed!<h2>Print instructions</h2>As most of my models this is pretty straight forward. But here is a few tips:<ul><li>Orientation: As the model files i oriented (medal flat, stand on the bottom)</li><li>Walls/perimeters: 2 for the medal part - 3 for the base stand</li><li>Supports: No - not needed. (The medal has some bridging - printed just fine on my Bambu Lab P1S)</li><li>Colors: It can be printed in a single color, but within Bambu Studio you can print the parts you like - would love to see you creative prints!</li></ul>Happy printing!<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>