lukeinthegarage

Nico91

<h2>Star Wars Logo Lithophane Lightbox.</h2><h2>New version with Color Litho under Raw model files.</h2><h2>Please use my print profile. Otherwise, the model does not have any holes for an LED cable to pass through.</h2><h2>Lightbox size is 240x106.</h2><h2>100% Infill and 0.1mm Layer for the Litho.</h2><h2>I used 1 meter of led wire fairy lights. It is a little more difficult to mount the LED strip. But with a little patience it works :)</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/826394/2024-01-31_131530559a15c8.jpg"></figure>

Star Wars inspired Lithophane Lightbox LED Lamp 

Lithopane

<h2>Unleash the Fury of the Force (and Nunchuck Fury Too!)</h2>Ever dreamt of channeling your inner Bruce Lee and Jedi Master in one epic go? Look no further than these 3D-printable lightsaber nunchucks!Inspired by a meme that was as brilliant as it was silly, these bad boys are:<ul><li>Easy to print: No need to be a droid engineer, just fire up your 3D printer and get ready to unleash your inner Jedi (or nunchuck master).</li><li>Collapsible: Safety first! These nunchucks collapse for easy storage and, well, not accidentally slicing your furniture (or yourself!).</li><li>Free to download: May the downloads be with you! Share the fun with your friends and become the ultimate meme-ing, lightsaber-wielding, nunchuck-swinging legend.</li></ul>Disclaimer: While these nunchucks are inspired by lightsabers, please remember they are for printing and admiring only. No harm should come to droids, furniture, or loved ones (unless it's from laughter-induced tears).So grab your favorite filament, channel your inner meme lord, and get printing!&nbsp;Printing Notes: I printed mine with a .4mm nozzle at .2 layer height and only used an outside brim on the chain.

Collapsible Lightsaber Nunchucks!!!

FunkyArt

<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_o9x116e39b26.gif"></figure>What is the most obvious thing to do when the handle of your drawer breaks off? Replace it with a push to open mechanism ;) Extend your drawers with the convenient push2open mechanism.The drawers should have rails. it is also important to ensure that the drawers can still be pushed in when upgrading, otherwise they will stick out a little. The brackets should be used for fastening, they are designed in such a way that they cannot be attached at any point, this is to avoid disturbing the mechanics. they can be glued or screwed, and they also allow easy replacement. All you need is a Spring (⌀ 7-8 mm x 40 mm) and some PLA & PETG &nbsp;&nbsp;<h3>Assembling:</h3><figure class="image image_resized image-style-side" style="width:49.42%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_inrxs9jhvk7r.jpg"></figure>&nbsp;&nbsp;&nbsp;First you should install the slide as shown in the picture. once the slide is in, it should not be able to fall out. make sure that the slide runs smoothly, if not, check for support residue or similar problems. If necessary, you may also have to grind the "rail" on the housing a little.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-left" style="width:49.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_jx5j340l2jhs.jpg"></figure>&nbsp;&nbsp;&nbsp;These two hooks are not the same, make sure the hook is installed below the axle height. You should also place the spring as shown in the picture. This is actually the only part where something can be installed incorrectly :) &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-right" style="width:49.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_0o97yw2e53j0.jpg"></figure>&nbsp;&nbsp;Here I have taken the side with the "R", which belongs to the back or closed side. I pressed it into the spring first and then installed both together. the slide should be fully extended (like picture above) so that the hook finds its correct place immediately. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-left" style="width:49.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_arthoszohmbq.jpg"></figure>&nbsp;&nbsp;&nbsp;Now install the spring, if there is no hole you have forgotten to remove the support ;) If it is to short you can pull them to increase the size a little (like i did). Then carefully bend in the cover parallel to the back. This should ideally be a little flexible (petg), then it should fit without any problems. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-right" style="width:49.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_xcdsurslner1.jpg"></figure>&nbsp;&nbsp;Now the whole thing should work. If it doesn't, press both hooks together again, they should be even with the housing. If this doesn't work either, check if there is support on the inside of the slider (on both sides). To use the whole thing for a longer time, you should apply a little grease to the grinding points.&nbsp;&nbsp;&nbsp;

Push2open - Reliable and powerful (Latch mechanism)

Push to open

Bambu Lab

This is an official component set by Bambu Lab for the A1 printer. The AMS lite Top Mount setup is a tested solution for mounting the AMS lite on top of the A1 printer.&nbsp;The component set consists of two main modules:<ol><li>Top Mount Bracket</li><li>Z-Axis Stiffener</li></ol>The Top Mount Bracket is meticulously designed to be tilted to the front for better balance. Additionally, the upper half of the bracket can spin left and right, providing easier access to the back spools.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092486/design/2023-12-14_ceeb9c0ed0a76.jpeg"></figure>&nbsp;The Z-axis Stiffener is designed to dampen back-and-forth printer movements. Thanks to the special elastic damper design at the bottom, there is minimum wobble even when printing in ludicrous speed with AMS lite fully loaded.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092486/design/2024-04-23_cafcdb16e7224.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092486/design/2024-04-23_4980ec2ffcf67.jpg"></figure>&nbsp;AssemblyHere is a tutorial video for the installation:<figure class="media"><div data-oembed-url="https://youtu.be/RmZOgrcDiRQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/RmZOgrcDiRQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;You can also buy the required hardware as a kit from here:<a target="_blank" href="http://store.bambulab.com/products/ams-lite-top-mount-screws-kit" rel="nofollow noopener">http://store.bambulab.com/products/ams-lite-top-mount-screws-kit</a>&nbsp;&nbsp;&nbsp;&nbsp;

AMS lite Top Mount for A1

Bambu

TAH3DGeek

While making some bleach swords I had the urge to make some Star Wars stuff so here we have another wall panel that includes versions with and without the front deco.&nbsp;Have a great day and happy printing.

STAR WARS WALL PANEL WITH AND WITHOUT FRONT DECO

Office

VIVI Official

<h2>Klick lock container - Diamond pattern</h2>Bigger version: <a target="_blank" href="https://makerworld.com/en/models/454911#profileId-362412" rel="nofollow noopener">https://makerworld.com/en/models/454911#profileId-362412</a> <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000443397/design/2024-04-26_823a1564c6a6.gif"><figcaption>Mechanism demo</figcaption></figure>For similar models look here:<a target="_blank" href="https://makerworld.com/en/@VIVI_66/collections/1163772" rel="nofollow noopener">https://makerworld.com/en/@VIVI_66/collections/1163772</a>&nbsp;Cheers.

Klick lock container - Diamond pattern

idea starter

Man of Mystery Intl.

So you wanna be a corn star?! You&#39;ve come to the right place.&nbsp;Easily expand your food weapon arsenal with this inconspicuous cob of corn concealing a roughly 30&#34; saber blade for an overall length of around 38&#34; from tip to tip when expanded!&nbsp;The corny sword is the thing you&#39;ve been waiting for every day since you heard about 3D printing swords.&nbsp;All you need is 4- 6x3mm magnets to seamlessly connect the tip to the pommel.&nbsp;The cap is designed with you in mind! For those who really like to fight and will end up breaking the blade, the blades are easily replacable! Just unscrew the corn cob cap and insert a new set of cob saber blades!&nbsp;Printing can be done purely in single colors plates. &nbsp;For more of my telescoping weapons, check these out:The Karrotana: <a target="_blank" href="https://makerworld.com/en/models/148358" rel="nofollow noopener">https://makerworld.com/en/models/148358</a>Banana Saber: <a target="_blank" href="https://makerworld.com/en/models/118301" rel="nofollow noopener">https://makerworld.com/en/models/118301</a>The Pickle Sickle: <a target="_blank" href="https://makerworld.com/en/models/190877" rel="nofollow noopener">https://makerworld.com/en/models/190877</a>7ft Bo Staff: <a target="_blank" href="https://makerworld.com/en/models/413159" rel="nofollow noopener">https://makerworld.com/en/models/413159</a>&nbsp;&nbsp;&nbsp;&nbsp;

Sword on the Cob - The Retractable Corn Saber

Sabers

waltersworld3d

<a target="_blank" href="https://www.patreon.com/waltersworld" rel="nofollow noopener">https://www.patreon.com/waltersworld</a>&nbsp;Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you!&nbsp;We present to you, our final model on Maker World, classic Batman! Printable on any machine with 4 color AMS capabilities, this is our vision of the Caped Crusader before power suits and bath robes.&nbsp;Standard black, grey, white, and yellow. Used Ziro PLA “Skin” for face.

Bricks Batman Classic

Lego

3D Print Masters Hub

Golf Putting Cup Golf Hole-Easy print-Great fun with the family. Practice your putting!-Please like and subscribe! More to come!<ul><li>🔥🔥 Great surprise for members! See this link for EXCLUSIVE 3D print models: <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥</li></ul>

Golf Putting Cup Golf Hole

DADS

Stag 3D

<h2>HEX Modular Storage System</h2>&nbsp;Introducing the HEX modular storage system. A scalable and modern way to store all of your 3D printing accessories. &nbsp;Easy as…&nbsp;Step 1 - Print the frameStep 2 - Choose and print a drawerStep 3 - If you&#39;re stacking, print the HEX Frame clips and fix the frames together as shown in the pictures&nbsp;Make sure you have a nice clean build plate with print glue applied to ensure a perfect print. &nbsp;Keep an eye out for more modular storage options coming soon…&nbsp;Assembly&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/827743/2024-03-09_a0b5c797b5ecb.png"></figure>

HEX Drawer System

Organizer

try this

3DMN

<h4>Print used around 0.9kg of PLA with 100% height: 40 cm 0.4mm nozzle 0.2mm layer height 4 walls 10% gyroid infill 8 top, 6 bottom layers</h4>

Brick Giant Skeleton

Bubs

cuncg

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-13_2a3ab3f4480948.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-01-22_4d9d26956d108.gif"></figure><h3>Tip: Please use the optimized version for printing to get better printing results</h3>The Year of the Dragon has specially designed a cute lucky dragon, symbolizing attracting wealth and treasures. The model production was completed in Cinema 4D, and the output model has very high accuracy, which can print larger sizes. In my printing, it is a small size, and I can also see enough details. It can print single colors or multiple colors. I use K&#39;s orange metal consumables to print the effect very well. There are several explanations as follows:<ol><li>There are two versions of the model uploaded, mainly with two designs: the body with scales and the body without scales.</li><li>There are no special settings for printing parameters, and printing can be done using preset settings. Experts can test for more ideal printing accuracy on their own.</li><li>This version of the design requires the support to be turned on for printing, and the support is also easy to remove. It is recommended to use support consumables to print the support surface, which is easier to remove</li><li>There are no requirements for consumables, and personally, I think Kexcelled&#39;s metal consumables have very ideal effects</li></ol>Update: My design has been commercialized as an electric waver<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-20_bdcc9eab0668f8.gif"></figure><h2>2024.6.20更新：请使用优化版本打印配置进行打印，它具有更少支撑更容易打印的优势</h2>龙年专门设计了一个可爱的招财龙，寓意招财进宝。模型制作在Cinema 4d中完成，输出的模型精度非常高，可以打印更大尺寸，在我的打印中为小尺寸，也能看到足够的细节，可以打印单色也可以打印多色，我使用k家的橙色金属耗材打印效果很理想。有以下几点说明：<ol><li>模型上传有两个版本，主要是身体有鳞片和无鳞片两个设计。</li><li>打印参数没有什么特殊设置，使用预设便可打印，高手可以自己测试更理想的打印精度。</li><li>该版本设计需要开启支撑进行打印，支持也便于拆除，建议使用支撑耗材来打印支撑面，这样更容易拆除</li><li>对耗材没任何要求，个人觉得k家的金属耗材效果非常理想。</li><li>模型已分开零件，可以自己实现多色打印</li></ol>制作过程分享：<figure class="media"><oembed url="https://www.bilibili.com/video/BV1jT4y1b7E9/?vd_source=0d3d7161a6587b2f3e211c44ce51f5ca"></oembed></figure>在接下来的版本将会做一个可电动摇手的设计，同时优化造型，实现无支撑打印。<blockquote>重大更新：</blockquote>电动摇手版招财龙已经成功产品化，效果如下视频展示：<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-20_bdcc9eab0668f8.gif"></figure><figure class="media"><oembed url="https://www.bilibili.com/video/BV1sE421N75z/?vd_source=0d3d7161a6587b2f3e211c44ce51f5ca"></oembed></figure>&nbsp;&nbsp;&nbsp;

Lucky Dragon/中国招财龙

elle

Raka Prints

This is my take on the 3D calendar of the 2024 season of Formula 1.&nbsp;Everything is facedown for the Textured PEI sheet finish.Flags are printed on photo paper not normal paper so it shines more. You can find them in the pdf file.If you need the text/word file message me and I will send it to you.&nbsp;If you want to support me you can always buy me a coffee - <a target="_blank" href="https://www.buymeacoffee.com/rakaprint3d" rel="nofollow noopener">https://www.buymeacoffee.com/rakaprint3d</a> -Or use my eSun affiliate link or use my code “RAKAPRINTS” for 10% off.Aff. link: <a target="_blank" href="https://esun3dstore.com/?ref=RaKaPrints" rel="nofollow noopener">https://esun3dstore.com/?ref=RaKaPrints</a>&nbsp;Materials needed:Esun PLA+ Black, Red and WhiteFoam board (700mm x 1000mm)Double-sided tapeSuper glue&nbsp;&nbsp;Update:02/01/2023: Curb connectors Layout (PDF) added03/01/2023: Shangai changed to Shanghai04/01/2023: Added F1 template for glueing the track, flag, land and city.16/01/2024: Dates added (new print profile).13/02/2024: Added a new template for Country, city and date.

F1 Calendar - 2024

Waikikiprod

<h2>02/02/24 : a Valentine's day variation is available <a target="_blank" href="https://makerworld.com/en/models/168156" rel="nofollow noopener">HERE </a></h2><figure class="image image_resized image-style-side" style="width:22.76%;"><a href="https://makerworld.com/en/models/168156" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2024-02-02_897099cc5abb18.gif"></a></figure><h2> </h2><h2>15/12/23 Update : Foldable ribbons availiable</h2><h2>12/12/23 Update : a <a target="_blank" href="https://makerworld.com/fr/models/90640" rel="nofollow noopener">special Makerworld edition is availiable here</a></h2><h2>For <a target="_blank" href="https://www.printables.com/fr/model/677685-lockable-present-ingenious-mechanism-commercial-us" rel="nofollow noopener">Commmercial use it'is possible here</a></h2><figure class="image image_resized image-style-side" style="width:26.19%;"><a href="https://makerworld.com/fr/models/90640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-12_a3b0161c841d58.png"></a></figure><h2>12/12/23 Update : new mono 3Dprinter profils !</h2><h2>11/12/23 Top 20 in the Christmas competition 2023</h2><h2>A Christmas gift with an ingenious locking system !</h2><h2>Simply twist the knot to lock or unlock the present !</h2>No need screws.<figure class="table"><table><tbody><tr><td><h4>You want to sell my 3D printed model : </h4><a target="_blank" href="https://www.printables.com/@Waikikiprod#join:367" rel="nofollow noopener">Subscribe to my club for 3$/month to be authorized to sell my physical 3D printed objects as long as you are subscribed</a></td><td><figure class="image"><img src="https://media.printables.com/media/prints/676503/rich_content/87883904-771e-4333-9188-40de5706c034/image.png"></figure></td></tr></tbody></table></figure><h2><a target="_blank" href="https://www.instagram.com/reel/C0R34OFrZxP/?utm_source=ig_web_copy_link&igshid=N2ViNmM2MDRjNw==" rel="nofollow noopener">Video of assembly Here</a></h2><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_a244242c3194c8.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_01c02e164c2a28.gif"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_d007994e3e8f18.png"></figure></td></tr></tbody></table></figure>Precautions :- do not change the first layer speed of 3mf files.- Your print bed must be completely clean.&nbsp;Advices :- Use 3D Lake Spray<h2>Different ways to print :</h2>&nbsp;<figure class="table" style="width:85.93%;"><table class="ck-table-resized"><colgroup><col><col><col><col></colgroup><tbody><tr><td><h2>The Box</h2></td><td>.3mf files</td><td>.stl files</td><td>Note</td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:50.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_4b9ce7cee2a09.png"></figure>Dual Color</td><td style="vertical-align:top;"><ul><li>box dual color .3mf</li></ul></td><td style="vertical-align:top;"><ul><li>box corp.stl</li><li>Box Ribbon dual color.stl</li></ul></td><td style="vertical-align:top;"><ul><li>best visual</li><li>long</li><li>no assembly steps</li><li>No need glue or screws</li><li>Need AMS</li></ul>&nbsp;</td></tr><tr><td><figure class="image image_resized" style="width:58.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_ddaa4e66428928.png"></figure>Dual color More Fast</td><td style="vertical-align:top;"><ul><li>Box Dual Color more fast .3mf</li></ul></td><td style="vertical-align:top;"><ul><li>box corp.stl</li><li>Box Ribbon plate.stl</li><li>Box Side Ribbon one.stl x4</li></ul></td><td style="vertical-align:top;"><ul><li>Best speed/time ratio</li><li>Need Glue</li><li>Need AMS</li></ul></td></tr><tr><td style="text-align:center;">NEW<figure class="image image_resized" style="width:65.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-07_6e8f3d496abfb8.bmp"></figure><figure class="image image_resized" style="width:66.03%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-07_3b1aaeabb335d8.bmp"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-15_b6ca630d0f031.png"></figure>Best mono 3dprinter profil</td><td style="vertical-align:top;"><ul><li>box mono 3d printer.3mf</li></ul>&nbsp;<ul><li>box lid mono 3d printer.3mf</li></ul>or<ul><li>Foldable Ribbons.3mf</li></ul></td><td style="vertical-align:top;"><ul><li>Box corp.stl</li></ul>&nbsp;<ul><li>Box Ribbon Mono 3D printer.stl x4</li></ul>or<ul><li>Foldable lid ribbon mono.stl</li><li>Foldable box ribbon mono</li></ul></td><td style="vertical-align:top;"><ul><li>Good visual</li><li>Faster</li><li>no need AMS</li><li>Need Glue</li><li>Support</li></ul></td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:50.42%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_58aadd48792f6.png"></figure>2 single color print</td><td style="vertical-align:top;"><ul><li>Box Single Color.3mf</li><li>Box Ribbon Single Color.3mf</li></ul>&nbsp;</td><td style="vertical-align:top;"><ul><li>Box corp.stl</li><li>Box Ribbon plate.stl</li><li>Box Side Ribbon one.stl x4</li></ul></td><td style="vertical-align:top;"><ul><li>Faster</li><li>no need AMS</li><li>Need Glue</li><li>Support</li></ul></td></tr></tbody></table></figure>&nbsp;&nbsp;<figure class="table" style="width:84.66%;"><table class="ck-table-resized"><colgroup><col><col><col><col></colgroup><tbody><tr><td><h2>The Lid</h2></td><td>.3mf files</td><td>.stl files</td><td>Note</td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:50.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_74f043e9cc08a.png"></figure>Dual Color</td><td style="vertical-align:top;"><ul><li>Lid Dual Color.3mf</li></ul></td><td style="vertical-align:top;"><ul><li>Lid.stl</li><li>Lid DualColor Ribbon.stl</li></ul></td><td style="vertical-align:top;"><ul><li>best visual</li><li>long</li><li>no assembly steps</li><li>No need glue or screws</li><li>Need AMS</li></ul>&nbsp;</td></tr><tr><td><figure class="image image_resized" style="width:73.82%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_981e1ca55db52.png"></figure>Dual color More Fast</td><td style="vertical-align:top;"><ul><li>Lid dual color more fast.3mf</li></ul></td><td style="vertical-align:top;"><ul><li>Lid.stl</li><li>Lid Ribbon Plate.stl</li><li>Lid Ribbon Side one.stl x4</li></ul></td><td style="vertical-align:top;"><ul><li>Best speed/time ratio</li><li>Need Glue</li><li>Need AMS</li></ul></td></tr><tr><td>NEW<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-15_b6ca630d0f031.png"></figure><figure class="image image_resized" style="width:75.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-07_f325f2210fc95.bmp"></figure><figure class="image image_resized" style="width:73.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-07_259ab40c4f41e.bmp"></figure>Best mono 3dprinter profil</td><td><ul><li>Foldable Ribbons.3mf</li></ul>or<ul><li>Lid ribbon mono 3d printer.3mf</li></ul>&nbsp;<ul><li>Lid mono 3d printer.3mf</li></ul></td><td><ul><li>Foldable lid ribbon mono.stl</li><li>Foldable box ribbon mono</li></ul>or<ul><li>lid ribbon mono 3D printer.stl</li></ul>&nbsp;<ul><li>Lid.stl</li></ul></td><td><ul><li>Good visual</li><li>Faster</li><li>no need AMS</li><li>Need Glue</li><li>Support</li></ul></td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:50.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_ba266743c2fad8.png"></figure>2 single color print</td><td style="vertical-align:top;"><ul><li>Lid Single Color.3mf</li><li>Lid Ribbon Single Color.3mf</li></ul>&nbsp;</td><td style="vertical-align:top;"><ul><li>Lid.stl</li><li>Lid Ribbon Plate.stl</li><li>Lid Ribbon Side one.stlx4</li></ul></td><td style="vertical-align:top;"><ul><li>Faster</li><li>no need AMS</li><li>Need Glue</li><li>Support</li></ul></td></tr></tbody></table></figure>&nbsp;<figure class="table"><table><tbody><tr><td> </td><td> </td><td> </td><td> </td></tr></tbody></table></figure>&nbsp;<figure class="table" style="width:84.41%;"><table class="ck-table-resized"><colgroup><col><col><col><col></colgroup><tbody><tr><td><h2>The Node</h2></td><td>.3mf files</td><td>.stl files</td><td>Note</td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:51.32%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_d6b57df443bf58.png"></figure>Single Color Print</td><td style="vertical-align:top;"><ul><li>Node Single Color.3mf</li></ul></td><td style="vertical-align:top;"><ul><li>node.stl</li><li>node Ribbon.stl</li><li>node half.stl x2</li><li>Lock Disc.stl</li><li>Pin.stl</li><li>Lock Pen.stl x2</li></ul></td><td><ul><li>best visual</li><li>Fast</li><li>No need AMS</li><li>No need glue or screws</li></ul></td></tr></tbody></table></figure>&nbsp;<h3>Thanks to you and your downloads, this 3D model is free! Thank you so much !!! <3</h3>Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons</a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>

Lockable Present - Ingenious mechanism

presents

thrutheframe

<h3>NOTE:</h3><ul><li>Please read the instruction guide below.</li><li>Download the 3mf file if you are using a Bambu slicer. Download the stl if you are using other slicers.</li><li>I do my best to double-check and test the print profiles I created. They are up to date with whatever changes I make. If you are using profiles made by others, please check if they are updated.</li></ul>&nbsp;<h3>UPDATE 24 Nov 2023</h3>Previous writeup - “…One of the ideas was to attach a bin/basket on the end of the cantilever x-axis. But based on experience with cantilever printers, it is never a good idea to hang a bin/basket at the extreme end of the X-axis extrusion, regardless of how robust the Z-axis linear rail is… ”&nbsp;I was not entirely right. While hanging a bin/basket at the end of a cantilever was never a good idea, attaching a lightweight guide/baffle is a very good idea. I looked at the designs by others and CAD what I think is a combination of what was good. Together with a shorter bin, I added Option 3 - Short Bin with <a target="_blank" href="https://makerworld.com/en/models/72654#profileId-77178" rel="nofollow noopener">Pruge Guide</a>. I have updated this project's 3mf file.&nbsp;The short bin uses the same magnetic docking system. So you will still need to print the magnetic docks D1 (plate 1).&nbsp;In addition, I have also increased the capacity of the bin without an increase in footprint.<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_0bf6f9d142792.png"></figure></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_ab21b4e9da909.png"></figure></td></tr></tbody></table></figure>&nbsp;This is the first of three designs by Thrutheframe for A1 mini. The 3 essential printable accessories that you will need for your new printer.<ol><li>A1 mini Poop Management System (PMS)</li><li><a target="_blank" href="https://makerworld.com/en/models/28311#profileId-24696" rel="nofollow noopener">A1 mini Build Plate Stand</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28319#profileId-24702" rel="nofollow noopener">A1 mini Scraper and Stylus Holder</a></li></ol>While the hardware for all 3 builds can be self-sourced, I am working with <a target="_blank" href="https://veetec3d.etsy.com/listing/1583763119/a1-mini-accessories-hardware-kit" rel="nofollow noopener">Veetec3D to offer an A1 mini Hardware Kit</a> for all the 3 builds above. It will include the 6x3mm magnets, M3 screws, VHB, thin double-sided tapes, and pre-cut self-adhesive anti-slip pads. Printed parts are not included.&nbsp;The price is 10€ with tracked shipping at 5€. We try our best to keep the pricing affordable for everyone to have easy access to the required hardware for all 3 builds. In addition, parts and labour are sourced within EU. If you like the designs by ThrutheFrame and wish to support his projects, do consider buying this kit. A small royalty will go towards funding project consumables ie. filaments, materials, electricity, coffee, time, software subscription, etc&nbsp;<h3>INTRODUCTION</h3>While unboxing my A1 mini combo, I noticed it needs a Poop Management System (PMS) to collect the filament poop during purging.The simple yet futuristic design of the A1 mini fuels my imagination and hence, my design for the PMS takes on the look and feel of a space station and docking bay.As the A1 mini may be the user's first 3D printer, I set up a few parameters when designing PMS:<ul><li>Aesthetically pleasing (to me), Easy to print/assemble and Fun to use.</li><li>Optimize print time and filament usage</li><li>Must fit onto the A1 build plate of 180x180x180mm</li><li>Will not cause accidental purge clogging</li><li>No support needed</li><li>Printed in PLA.</li></ul>&nbsp;There are 3 PMS options:<ul><li>Option 1 - An eco-friendly design using the filament cardboard box as a ReCycle PMS.</li><li>Option 2A - A fully printed Bin</li><li>Option 2B - For users who print extensively, a printed Chute to guide the poop down into your regular waste bin</li><li>Option 3 - A short bin with a purge guide/baffle that is attached to the purge wiper (recommended)</li></ul>&nbsp;You will need to print a pair of docking bays (D-1) which the PMS will be connected to the A1 mini printer.All the above PMS are magnetically attached with Ø6x3 magnets to the D-1 docking bays.The D-1 will be secured to the A1 mini printer using VHB tapes (or similar mounting tape that is 1mm in thickness).&nbsp;<figure class="image image_resized" style="width:50.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-25_64c946113b006.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_7c8a4c70fff1a.png"></figure>&nbsp;<h3>BOM</h3><ol><li>Ø6x3 magnets - 8pcs</li><li>1mm VHB tape (10x20mm) - 4pcs</li><li>Thin double-sided tape - For ReCycle Bin only</li></ol>** Note that the VHB tape (or any double-sided tape) has to be 1mm thick. This is because the recess I made is 0.8mm, allowing the dock to flush with the printer.&nbsp;<h3>INSTRUCTIONS</h3>Download the 3mf file. The settings are prepared for printing PLA on an A1 mini. If you are printing on a different printer, please make the necessary changes to the settings.The STLs are also available in folders.I designed the parts based on 0.4mm nozzle and 0.2mm layer height. Print in 0.2mm layer height for accuracy.Print plate 1 - Docking bracket. Both front and back docking brackets are required.Print either Option 1, 2A/2B or 3 depending on the configuration you want.If you are using Option 2A/2B. You will need to print plate 3 - Shield top.If you are using Option 3, you will need to print plates 6 & 7<figure class="image image_resized" style="width:60.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_75bf1beab3e79.png"></figure>&nbsp;Docking Bracket (D-1)<ul><li>Press fit the Ø6x3mm magnets into the docking bracket. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity of all the magnet are facing in the same direction.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_1a49a648dbdd6.png"></figure>&nbsp;<ul><li>Paste the VHB tapes onto the docking bracket.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_4c335b1b1604d.png"></figure>&nbsp;Option 1 - ReCycle Bin<ul><li>Press fit the Ø6x3mm magnets into the ReCycle brackets. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity is correct. It should be attracting the D-1 bracket.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_m65ncfzfjsze.png"></figure>&nbsp;<ul><li>To attach the spool box, place double-sided tapes on the inner side of ReCycle brackets.</li><li>The dimension of the bracket is based on Bambu Lab filament with spool cardboard box. There might be some size differences with other brands' boxes, but the double-sided tape should hold it well.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_vwvwl5p02bed.png"></figure>&nbsp;<ul><li>Cut the spool box according to the dimensions as seen in the image. No more than 55mm from the bottom and no less than 100mm wide.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_3mxezvsmjkis.png"></figure>&nbsp;<ul><li>Install spool box to ReCycle brackets</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_mrjcdjvanqw3.png"></figure>&nbsp;Option 2A Bin & 2B Chute<ul><li>Press fit the Ø6x3mm magnets into the bottom piece. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity is correct. It should be attracting the D-1 bracket.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_1lf2xxu3vhu2.png"></figure>&nbsp;<ul><li>Glue the top and bottom pieces together. The tongue and grove design will assist in alignment.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_fm7yr0fxfedn.png"></figure>&nbsp;Option 3 - Short Bin with Pruge Guide<ul><li>In addition to plate 1, you have to print plates 6 & 7.</li><li>Install the magnets the same way as all the other bins</li><li>Paste a piece of tape over the area as shown in the image below. During purging, the tip of the purge can still be molten and can accidentally adhere to the wall. The tape helps to reduce the chance of this happening.</li></ul><figure class="image image_resized" style="width:477.812px;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_9f22dcecbc243.png"></figure><ul><li>Install image</li></ul><figure class="image image_resized" style="width:477.571px;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_6724c482cd6c7.jpg"></figure>&nbsp;&nbsp;Installing to the Printer<ul><li>Home and turn off printer. Push the toolhead all the way to the left of the X-gantry.</li><li>Attach the D-1 brackets to the ReCycle/Bin/Chute.</li><li>Align it with the X-gantry, make sure the poop will drop into the ReCycle/Bin/Chute and stick the D-1 bracket to the printer body.</li><li>Note that part of the D-1 bracket will slide under the printer.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_5900afd4bb049.png"></figure>&nbsp;<figure class="image image_resized" style="width:50.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_qv4fqhizk58s.jpg"></figure><figure class="image image_resized" style="width:49.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_ciofeugx7tly.jpg"></figure>&nbsp;<ul><li>Turn on the printer and do a homing. Watch and check. The poop shooter should not be pressing down on any part during homing.</li><li>Enjoy a neat and poop-less work table.</li></ul>&nbsp;<h3>VIDS & PICS</h3>Modbot showcased the ReCycle bin version on his A1 stream. Scroll to 26 minutes to see how it works.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Fks_nOL2eys"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Fks_nOL2eys" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Modbot showcased the bin version 2A, the build plate holder and the stylus+scraper holder.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=P4EphELNuw8&t=211s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/P4EphELNuw8?start=211" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like what I designed and want to contribute to my coffee addiction, software subscription and filaments I need for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated. &nbsp;Another way is to purchase the kit (TBA) from my vendor, we try to make it affordable and a small amount goes to supporting this project in terms of development consumables ( filaments, electricity, coffee, time and my brain cells)&nbsp;<h3>CAVEAT</h3>As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion.