Mark - Monster 3D

Lov3d

Project: queen.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;The Model is 118.75x211.11mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2mm&nbsp;Filaments Used: pla sunluBlack Transmission Distance: 0.3 PLA sunluPurple Transmission Distance: 4.5 PLA BambuLab Basic Yellow Transmission Distance: 6 Pla bambu White Transmission Distance: 6This print uses 4 unique filaments&nbsp;!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!&nbsp;Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Purple At layer #12 (1.04mm) swap to Yellow At layer #16 (1.36mm) swap to White for the rest.

QUEEN ART (HueForge)

Birthday

EPIQ3D

UPDATE 08 June 2024:Pistachio Bowl 2.5 has been released - <a target="_blank" href="https://makerworld.com/en/models/488822#profileId-404395" rel="nofollow noopener">check it out here</a>--------------------------------------------------------------------------------------------------------- — No support needed — — A pistachio bowl reinvented — Unique stylish design, crafted to be used, but also seen.2 in 1 function. Complete the collection, and check out the bowls little brother - Pistachio Cup So, how does it work, whats so speciel.Well.. not much ;) but the idea is, that when you dispose of the empty shells, you put them in the hole (nothing new there).BUT- when the spot beneath gets overcrowded of sheels, dont rattel the bowl - just turn the top to a new spot.If shelled nuts is not for you, then the bottom part can also be used as a standalone bowl And, its pretty … Holds about 250 grams

Pistachio bowl 2.0

kitchen

FlorinV

Great desk accessory, to look at, to play with(easy to spin) and to use.&nbsp;Update 27.01.2024: Increase the filament infill and walls of the arm (to better hold it&#39;s shape in time, as the magnetic force tries to deform it). Changed one of the screws to be a shorter version, in case your magnets are too strong and need a shorter one to fit.Update 31.01.2024: Added another pen model (Hexagonal style). There is a new profile for this one. Enjoy !&nbsp;Features:<ul><li>Parts needed: 3 magnets with size 10x2mm. Probably you can use smaller magnets also, but you would have to add maybe one more magnet to the support arm. You need to play with it. Also 8x2mm magnets should be fine, but this is not tested by me (someone else tried).</li><li>No AMS needed to print it multicolor.</li><li>Two different pen designs to choose from. You can use them without support and magnets, if you want.</li><li>The pen design included in the main profile, is the stronger one, clean and with a special cutout that can be used to check the level of ink in your reserve.</li><li>The optional pen design is using a thin insert to make the pen multicolored without using AMS or wasting a lot of filament and time.</li><li>Optional tag caps to attach to the support arm. You can add one character to each cap and form a gamer tag, a name, an abbreviation etc. Or add some color pattern, whatever you like.</li><li>Designed for Pilot reserves ( 0.7mm), but can work with any pen reserve as long as you cut it at 122mm length. Just search with google something similar with: Pilot FriXion Pen Refills, 0.7 mm</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/388de27a-0257-4f7d-870e-8d9665c7c1de.jpg"></figure><ul><li>If you use Pilot reserve, you have to use the little spacer as displayed in assembly pictures or video.</li><li>If you choose to use another type of pen reserve, just cut it at 122 mm length and don&#39;t use the spacer anymore. Tested with simple pen reserve like the one bellow, and it works also. Just cut it to 122mm length and don&#39;t add the little spacer provided for Pilot reserves.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-01-19_8d03559413d1e.png"></figure>Assembly guide:<ul><li>Please check the video at the end with full setup and please use subtitles, as I&#39;ve added some useful information while assembling it.</li></ul>Pen:<ul><li>Please remove carefully the brim from the body of the pen after printing it. Usually if the bed sticks good, when you pull the body pen, the brim with separate easily. I&#39;ve setup a small gap between pen and brim, to be sure it sticks well, as it&#39;s a tall and narrow part.</li><li>Attention! Before gluing the magnet cap to the pen, be sure the magnet is facing the right direction to be attracted by the magnets on the support.  Carefully glue the magnet cap, to not get glue everywhere.</li><li>Please check bellow all the parts of the pen and how they are connected.</li></ul><figure class="image image_resized" style="width: 71.29%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-01-19_6cf57802c8d71.jpg"></figure>Support:<ul><li>Carefully remove the supports from the base part.</li><li>Insert the arm into the base and screw in the provided screw. There are 2 versions of the screw in the profile, one longer and one shorter. Depending on your magnets power, use the one that works better for you.</li><li>Be sure you screw it in enough so that the base can lay flat on the table. Change the screw with the shorter version if you need to.</li><li>Add two magnets (10x2mm) on the top hole of the arm. Before gluing them, be sure they are aligned with the magnet from the pen, so that they attract each other!</li><li>After everything is setup, you can use the bottom screw to fine tune the distance between pen magnet and support arm magnets, so that it holds the pen good, but don&#39;t pull up the pen from the base.</li></ul><figure class="image image_resized" style="width: 78.12%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-01-19_ff9970461619c.jpg"></figure><figure class="media"></figure>&nbsp;Step by step on how to customize the letter caps:<ul><li>you open the &#34;8 blank caps to customize&#34; into Bambu studio, </li><li>select one of the caps objects, </li><li>click on the TEXT icon -add one letter into the &#34;Input Text&#34; field </li><li>move your mouse cursor over the cap and click when you center it </li><li>you can move it around again by selecting the &#34;text_shape&#34; object later under the &#34;button.stl&#34; object </li><li>Repeat for each letter you want. (you have 8 caps into the profile, but you can clone them to have more if you want)  </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-03-18_a5b871a5e0d65.png"></figure>

Magnetic Levitating Holder & 3 pen models

Office

Darren

AUTOTRAY LITE&nbsp;<figure class="table" style="width: 95.57%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_5b16cb3dce6a.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_63e85c7e5eb8b.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_8b4c3443c53cb.jpg"></figure></td></tr></tbody></table></figure><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model and want to encourage me to come up with more original and innovative designs please consider boosting this model.  I mainly design more unique and complex models that take longer to print.  Due to print time they get downoloaded less frequently than quick to print models.  Boost are a way to compensatie for this and are always greatly appreciated.   Thank you</boostcontent></boostme>&nbsp;Design&nbsp;This is a more compact version of Autotray that can be printed on any printer with a 180 mm x 180 mm plate including the A1 mini, P1 and X1. The full sized Autotray is here: <a target="_blank" href="https://makerworld.com/en/models/425827?from=search#profileId-329526" rel="nofollow noopener">https://makerworld.com/en/models/425827?from=search#profileId-329526</a><ul><li>It is quick to print. 8.5 hours for P1 and X1 and 11.5 for A1 mini</li><li>It has much fewer parts than the full sized Autotray</li><li>Is is quick and simple to assemble and disassemble with clips (see the Clip cards).</li><li>The angular position of the tray can easily be adjusted.</li><li>It folds easily for storage.</li><li>I have included print profiles for the X1 and the A1. The print files are in 3 parts. The main unit, the rear headrest brackets and the optional components.</li><li>Support is only required for the rear headrest brackets</li><li>The hinges for the steering wheel brackets and the rear headrest brackets are print in place.</li><li>The rear head rest bracket features a rotating cylinder to lock the bracket in place.</li><li>No external parts are required</li></ul>Options and features<h2 style="text-align: center">*** NEW OPTIONS FOR AUTOTRAY LITE ***</h2>Here are some new options for Autotray Lite.  Be sure to check back as I will be adding to these in the next while.&nbsp;<figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-11_54c652af38c7.png"></figure></td><td>Car basketball add-on A great way to relieve boredom when waiting in the car.  I enjoyed making and playing this game. You can get this add-on <a target="_blank" href="https://makerworld.com/en/models/461087#profileId-369765" rel="nofollow noopener">here</a>     </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-11_5b00ce96e39de.png"></figure></td></tr></tbody></table></figure><figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/459198" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-09_5f73650b40ee5.png"></a></figure></td><td>Autotray Laptop/tablet add-onThis is one of the new optional add-ons for Autotray to allow use of a laptop/tablet.  The trays replace the tablet holder and can be quickly and easily be added and removed.  Enjoy!  &nbsp;You can get this add-on by clicking <a target="_blank" href="https://makerworld.com/en/models/459198" rel="nofollow noopener">here</a>&nbsp;&nbsp;</td><td><figure class="image"><a href="https://makerworld.com/en/models/459198" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-09_e2f1cc338a717.png"></a></figure></td></tr></tbody></table></figure><figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 97.33%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-10_e32eaf1e349e2.png"></figure></td><td>Chopstick holder add-on This add-on is for a chopstick holder.  I added print profiles for the A1 and the P1 and X1 as well as a STL file.</td><td><figure class="image image_resized" style="width: 93.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-10_456ee0b5f4d96.png"></figure></td></tr></tbody></table></figure>Autotray includes many options and features which can quicly and easily be attached to Autotray with clips:<ul><li>Phone mount brackets (back and bottom)</li><li>Nintento Switch mounting brackets</li><li>Fry holder</li><li>Ustensil holders</li><li>Tablet holder</li><li>Mouse pad</li></ul><figure class="table" style="width: 96.61%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_791d636e9d508.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_aa448f0f2541b.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_df39a6ff45d86.png"></figure></td></tr></tbody></table></figure>Autotray has mounts to enable adding other parts and features.  Assembly is quite simple. It is shown in the gif.&nbsp;Autotray full size&nbsp;Autotray is also available in a larger 3d model suitable for in car offices etc.  The link for the 3d model is : <a target="_blank" href="https://makerworld.com/en/models/425827#profileId-329526" rel="nofollow noopener">https://makerworld.com/en/models/425827#profileId-329526</a>&nbsp;I welcome any comments and suggestions about improving Autotray.&nbsp;My designs &nbsp;I enjoy creating 3d models that others can use and appreciate.  It is a very fun pastime.   I find it very rewarding to see my models downloaded and printed.  I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. &nbsp;If you liked my model and wish to encourage me please give it a like or a boost. If you wish you can also help me with my <a target="_blank" href="https://ko-fi.com/darren3dmodels" rel="nofollow noopener">filament costs</a>.  Thank you.&nbsp;My Models&nbsp;If you are interested, here are some of my creations. You can also see all my models on my <a target="_blank" href="https://makerworld.com/en/@user_1543154938" rel="nofollow noopener">profile</a>.&nbsp;<figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/425827?from=search#profileId-337902" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_8cb4bfc480828.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/425827#profileId-337902" rel="nofollow noopener">Autotray</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/439932#profileId-345597" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_80f1fc53f1258.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/439932#profileId-345597" rel="nofollow noopener">Versa Mount</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/447157#profileId-353793" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_252dfd34be1da.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Table saw</a><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Outfeed </a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/440873#profileId-346595" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_c0c403ecc4bc.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/440873#profileId-346595" rel="nofollow noopener">Treat helper</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/457210#profileId-365192" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_7677874c7a172.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/457210#profileId-365192" rel="nofollow noopener">Ipad tablet stand</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/432891#profileId-337490" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_f02e210418cb4.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/432891#profileId-337490" rel="nofollow noopener">Autotray Lite</a></td></tr></tbody></table></figure>&nbsp;&nbsp;