I used PETG. I only have three colors, and they are all wild, so don't judge me. 😅. The model prints well with minimal supports. I printed it with the screw heads down, so I had two round disks of support material to pop out. I carefully used a small flat screwdriver for that. For assembly, you put the square pieces with buttons inside the case, then you press the case together, then finally you screw in the screws. Remember, there is a flat side for the holes and the big "U", so make sure you press it in right. The base models requires the handles to be a normal distance apart, so if you have weird cabinets like me, you'll have to go into Blender and lengthen the "U" significantly for one of your cabinets.

It came out a little loose for my device, but it works well enough. I put a rubber band around it for extra security. The design is neat overall.

Sharp look, prints well, and accepts a pump perfectly. Thank you!

Awesome! Works well. Prints well.

Prints well and works extremely well!

The orange and green slides are from this. The aqua ones are official Duplo. As you can see, they work well together. The easy support removal print profile is as easy as it claims to be. I did a print of the mirror profile -- it prints well and the supports will come off with a little care. Overall, I love these models. My toddler loves slides, and he was super excited to see a couple new ones to play with.

I printed a half at a time to get the color combinations and patterns I wanted. This is a great print profile for a great model. The plates / halves seem compatible with each other, so have fun with the combinations.

My filament is a little stringy, but the print profile works beautifully! This is a great model. (Dry your filament!)

These print extremely fast but also well! They don't give the snug, custom fit you'll get from the exact container designed for your specific spool, but instead you have a well-designed, well-vented, universal container that's perfect for storage. I printed a half dozen for my random rolls I've acquired for single projects that may not get replaced later on. Versatility! That's what you get. These are designed to fit a wide range of spools.

They fit well. They print well. I love these!

Fits well! Works as intended! Thank you!

Easy to print and make. Holds a good number of things. Quite useful! Make sure to have a clean build plate -- which should be general advice you always do -- but this one especially needs it because of the hinges and smaller surfaces that depend on it.

It's a real game changer putting a tool like this directly onto your lube bottle. Printer maintenance is important. Tools like this are so neat!

What a great tool! The right tool really makes a difference.

Neat design! The moving mechanism seems to work just fine! My toddler will love this!

It's the perfect size for my wire cutter and wire stripper! Thank you!

Fits well, great design!

works well, thank you!

Great idea! The implementation was overall great. My recommendation: Slightly tighten the stop piece for the axel. Maybe it's just my printer. But for me, that particular piece seems like it could be a hair of a mm smaller for the + opening.

Effective design, works well. I recommend this brim profile unless you have your build plate, etc. perfect since there isn't a large gripping surface on this model.