Printed in Creality PETG, seems pretty sturdy. Cool!

I carried one of these printed in PETG for several months, it finally broke so I reprinted in ABS. Great printing this instead of spending $10 or $20 on the exact same thing on Amazon, thanks!

worked very well with the linked plexiglass. I used m3x6 screws to hold the thingys, they were slightly too long so I used a couple washers as well. Printed in PETG CF and white PLA

Printed everything from this profile, only knocked off a star because it’s missing the base? Had to download the other print profile to get that piece. Came out awesome!

girlfriend loved it 🌹 thanks

Came out really good 👌🏻

Came out really good! I didn’t calibrate any of my filaments or test fit any of the connectors and they all snapped in no problems. everything was well made and thought out.

Awesome model! Took someone else’s suggestion of using the “out of the frame serpent strike” fangs it came out great. Nobody’s taking my PS5 controller now 🐍

this was so much fun!!! this model was one of the reasons I wanted to buy my P2S (no joke). I didn’t have multicolor on my flashforge so this model was one of the first things I started on once I figured out my printer and finished Christmas presents. I rescaled everything to 112.61%, this made Z axis 250mm (P2S limit is 256, Xbox 360 actual size is 310mm so this is close). no problems with assembly once I did that. I only printed out the games I actually played on this system that’s why some are missing. Thank you to the creator!

this print was a lot of fun! the real build instructions work pretty well, figuring out how parts were redesigned or colors changed was part of the fun. will definitely be looking at designers other models! a few notes for assembly: highly recommend using CA glue especially for structural parts, some of my pieces snapped together but many were not tight fit, quick application of glue and accelerant and they’re bonded for life. just make sure you’re assembling correctly before gluing 😁 I don’t know if I deleted the part or what but I cloned an axle and resized it to 94mm for the headlights, would have printed in red to match if I’d thought of it. I highly recommend performing steps 19 and 44 at the same time, trying to get the doors to click in without crushing everything else was a challenge. I think I ended up using a parallel jaw wrench to get it fit together in the end. wheels were printed in geeetech silver silk PLA

Really fun design, ran off a bunch before the finale 😈

Printed really well in elegoo PETG HF green and creality PETG black. Bought a $10 set of bits at harbor freight so I could get a T25, 2.5 metric, 1/8 SAE, and a Phillips without stealing from a complete set. Will make a good addition to my Onewheel ride bag. Thanks!