Limala86

cover

Complete_front.jpg

Complete_side.jpg

Filled_front.jpg

Filled_side.jpg

Grid.jpg

Grid_+_1.jpg

Grid_+_2.jpg

Grid_+_3.jpg

Grid_+_4.jpg

Grid_+_5.jpg

Bathroom Makeup organizer Gridfinity inspired

this is probably one of the cutest prints ever made 😍printed perfectly 😍

Triple G Workshop

Cabbit (Half Cat-Half Rabbit)

Custom Supports 0.2mm layer, 2 walls, 15% infill

This was a Very good and sturdy print. 
A tight fit, so i had to use a rubber mallet carefully to get the baskets all the way on to the holders. 

I ran out of Black matte PLA When printing the baskets, so the top layers ended up being printed with Spicy Copper, wich I really liked <3 

Had to print the basket holders in dark blue PLA, so Im probably going to reprint those.
But I love it, the baskets have a good size on them. 

DenoD

Shower cabin shelf system

0.2mm layer, 2 walls, 15% infill

It is so great <3 
I have one minor issue with the razor holders, but that is bc I have razors with thick bases, so they fall off easily. Might end up reprinting without razor holders and print some seperate to hook on the shelf. 

BUT! the Shelf is sturdy, good tight fit and great quality. 
Had no Issues when Printing. 

The screw part on the back also fit perfect! <3
(I hadd to dissasemble my showerrod a little bit to screw the shelve on, but that is my own fault for not measuring the space properly. Needless to say, this shelf is not going anywhere unles I screw down the showerrod again ;) 

PeterP

Bathroom shower rod shelf

Large shelf - knob in the middle

Such a beautiful print. 
fast, easy, no Issues <3 

Printed in eSun PLA Matte - Black and
Spectrum PLA Silk - Spicy Copper

Art Design. 3D

Pad & Boxes Sculpted

Fast & Less Material

Earn this badge when print successful more than 100 different models and 500 hours

Pioneer Maker

Earn this badge when visit MakerWorld more than 20 days in last 30days UTC time

MakerWorld Guardian