lilbuddha

Fat Tony

Printable TPU o-rings that can be used to assemble the Dum-E handy desk buddy (https://makerworld.com/en/models/195554#profileId-217277) with permission given by the creator.&nbsp;These replace the need for cutting/gluing neoprene gaskets as called out in the original BOM. Simply fit the o-rings into place and screw down.&nbsp;The smallest groove (at the wrist) was too thin and unprintable even with a .2mm nozzle. The underside of the supports also came out too poorly to actually fit anything inside of the groove. The solution for that was was an oversized gasket that purposely doesn't fit in the groove which seems to work well. If slicing yourself: Print SLOWLY. These are very small and a very quick print that you want to be fairly accurate, the slower the better. I used a .4 nozzle with .08 layer height with .32 line thickness at 1mm/s MVF. YMMV especially depending on which TPU you are using.

Dum-E O-Rings

Dum-e stuff

jarvizar

3d miniature of Lower Manhattan, NYC!&nbsp;Model created in Blender using the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;&nbsp;Check out my collection of other miniature cities: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;Midtown Manhattan miniature: <a target="_blank" href="https://makerworld.com/en/models/495851#profileId-410081" rel="nofollow noopener">https://makerworld.com/en/models/495851</a>&nbsp;Check out my <a target="_blank" href="https://makerworld.com/en/models/111838#profileId-119762" rel="nofollow noopener">even larger version of Midtown Manhattan</a> including the East River &amp; Hudson River!&nbsp;<h3>Printing &amp; Slicing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000106264/design/2023-12-27_7536c6348b762.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

New York City Lower Manhattan 3D Miniature

City Mini

wuguigui

<h2>Summary</h2>This is a toy pistol designed for kids play, it can be take apart easily by a small tool hide in the pistol grip, have fun in assembling and disassembling, and also you can shoot if you put suitable springs in it.The material setting and springs' size is on the image, also the assembly instruction, look it backward:)All parts could be printed in PLA&TPU, besides 4 springs. some parts need sanding to make it function well.The barrel's diameter is 13 mm to compatible with NERF's bullets, I'm not sure because I don't have a NERF's bullet :)enjoy it!I update a new version of this toy pistol, it takes me a long time and huge energy to improve it, if you like it, you could buy it at: <a target="_blank" href="https://www.myminifactory.com/object/3d-print-toy-pistol-191639" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-toy-pistol-191639</a>My other designs: <a target="_blank" href="https://makerworld.com/en/u/2112721175" rel="nofollow noopener">https://makerworld.com/en/u/2112721175</a>Thanks!<h2>Print Settings</h2>Printer: anycubic Rafts: No&nbsp;Supports: Yes Resolution: 0.2&nbsp;Infill: Cylinder rod 80%, TPU 10-15%, Others 30% Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=ESUN+body+-+PLA%2C+Seal+and+Bullets+-+TPU" rel="nofollow noopener"> ESUN body - PLA, Seal and Bullets - TPU </a> doesn't matter<h2>Post-Printing</h2><img src="https://cdn.thingiverse.com/assets/dc/a9/fb/19/13/_20200306132340.jpg" alt="image"> <img src="https://cdn.thingiverse.com/assets/24/36/03/22/46/_20200306132336.jpg"> <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=l3fkS658ikE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/l3fkS658ikE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=dlYptLqrOb8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dlYptLqrOb8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h2>How I Designed This</h2>I have wanted a pistol of my own since I was a little boy. Now I have a 3D print machine and experience in product design to help me to make it successfully.You can also design accessories based on the picatinny rail to make it more fun. <img src="https://cdn.thingiverse.com/assets/d9/64/ac/c2/c3/008.jpg"> <img src="https://cdn.thingiverse.com/assets/52/5a/68/36/b3/009.jpg"> New one: https://www.myminifactory.com/object/3d-print-toy-pistol-191639

Toy Pistol

Fun Stuff

<h2>Summary</h2>Updated 20230615 Someone said the "1.1 Part-Shell-Front" is too tight to insert into the body, so I modified it, you can try the new part now.Updated 20230605I separated the body into 2 parts, now it is available for small printers( print size less than 10X10X10cm)Also, I removed the nostril, because, in the early TV cartoon series, they don't have any nostrils on the face; The front shell and the front body parts have a snap groove now， which can help you to assemble them easily.But I kept the old version, you can download the new version parts with the title "1.1"Updated 20230530Sorry guys, someone has an issue when assembling the part"Part-Shell-Front" to the body, Then I found the part is wrong, and now I reupload the part"Part-Shell-Front", Please download it again.Teenage Mutant Ninja Turtles, the memorial of the Post-80s generation.I designed a model kit version of the four cute turtles, It imitated the frame structure of the model kits, can prevent edge warping during printing, and can also recall the fun of assembling the model kit. Most of the sprues adopt hidden designs.You can try to print it with no support, 0.1 mm layer height is recommended.Follow the "Assembly Instructions" to make it. Watch the video to get more information.You can get the fun from the assembling.Click "Like" if you like it, or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a> thank you!<h2>Post-Printing</h2><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=KjEl-mLZMsw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/KjEl-mLZMsw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Dum-e stuff

City Mini

Fun Stuff

TMNT