lgcyaxi

EPIQ3D

— NO SUPPORT NEEDED — Display your Bambu Lab filament swatches like a PRO The clearence between the wheel and the base are really tight (0,8mm)This is to ensure the rotational movement are as smooth as possible (with no wobble) There&#39;s 4 slots under the base, that fits 4 x Ø10x2mm rubber feet This model is printet on a stock Bambu Lab A1, with Bambu Lab PLA Basic filament.If you print this model on any other brand, and it dosnt fit directly, then i recommendsanding the swatch wheels contact points a little at a time to ensure the best fit. The slots are modelled after the injection molded swatches, so i cant say if the early 3D printet swatches will fit.<figure class="image image_resized" style="width: 43%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497645/design/2024-06-16_11d77805c5951.png"></figure>-------------------------------------------------------------------------------------------------------------------------------------------------------- Not a remixThis model is build with the inspiration of <a target="_blank" href="https://makerworld.com/en/@BradFTBT3D" rel="nofollow noopener">Brad - FTBT 3D</a> Spinning Filament Swatch Display(<a target="_blank" href="https://makerworld.com/en/models/188119#profileId-207981" rel="nofollow noopener">https://makerworld.com/en/models/188119#profileId-207981</a>)

Filament Swatch Wheel

X1C Tools

HJW Pegboard

fay3dlab

&nbsp;A few months ago, i sold my Polygon Bend R2 bike due to financial constriction and i wasn't cycling all that much.. As nostalgia memories kick in I began to think what i can make with the bicycle in mind.. and after a few days.. the mini bicycle card came to fruition..The whole kit card was modelled using Tinkercad and 3d printed using Bambulab P1p..Assembly video can be found here: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=LcFwJKVBVuo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/LcFwJKVBVuo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><a href="https://www.buymeacoffee.com/fay3dlab" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/arial-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 109px !important;" ></a>

Mini bike kit card

Kit card

Valeria Momo

I have 2 AMS with filaments of different brands such as Sunlu, Elegoo, Bambulab, etc... When I prepare multi-color prints, the colors must be associated on BambuStudio. Now it&#39;s much easier because this stand containing the <a target="_blank" href="https://makerworld.com/en/models/114583#profileId-123183" rel="nofollow noopener">color samples</a> on my ikea skadis near my PC monitor, with indication of the precise material.<figure class="image image_resized" style="width:421.146px;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000213498/design/2024-02-29_147da18b14eec.png"></figure> Versions A, B, C and D are available in the print profile (so, up to 4 AMS). It fits both my <a target="_blank" href="https://makerworld.com/en/models/114583#profileId-123183" rel="nofollow noopener">color samples / reference</a> and original Bambulab Color Sample. Enjoy!If you prefer a Desk version, try <a target="_blank" href="https://makerworld.com/en/models/212888#profileId-232496" rel="nofollow noopener">this</a>!<figure class="image image_resized" style="width:44.9%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000213498/design/2024-03-01_8fde9ad933354.png"></figure>

AMS Swatch Sample Display for IKEA skadis

SKADIS

HpInvent

Here is a super cute easter decoration for you to print ;)This time its a more modern design.  The model is seperated on two plates: On the first plate is the bunny, on the second plate is the flower head. So its easy to print the flower head in a different colour. For the stem of the flower simply cut a piece of 1.75mm filament and stick into the flower head. The flower head also hase some grooves so its easier to fold it and give it a little more natural flower shape.  Et voila, the bunny is finished! I sliced it a little smaller to take some time of the print. Simply scale it to your liking, there is enough resolution in the sculpt;)Printed with support. NEW : Below is a link to his cute little modern friend with hanging ears ;) IN THE LINK BELOW YOU CAN ALSO FIND THE CUTE MODELS OF THE CONTEST BANNER!! I have a bunch more cute easter decoration in my profile that is not part of this contest!!!! So don&#39;t forget to print his cute little friends and my other models: <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-04-15_f027d438d0393.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-04-15_b1e75bac7bd51.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-03-08_a8a626fc04c78.png"></a> <a target="_blank" href="https://makerworld.com/en/models/194458" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-02-23_539193d8507ba.png"></a><a target="_blank" href="https://makerworld.com/en/models/210984" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-02-28_8818bd98777e4.png"></a><a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-02-27_c1e7b8a459e5d.jpg"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-03-06_ea517b7dbe741.png"></a>Happy printing!

Modern minimalistic easter bunny with flower hands

Remix

3DNestCZ

Very easy print and assembly with no supports and fitting all common printer beds. All you need is to print all parts, glue them together and finish the monster with one 25mm and one 20mm wiggle eye.No need for supports or rafts.&nbsp;

Pen Box - Monster C

Organizer

Andreas_Lampel

Simple clip to hold your vegetables onto a Stick.&nbsp;I have printed it in PETG to have some flex to it.

Vegetable Clip

Plants

Assembled and setup for multiple color. I printed the individual ghost to optimize filament changes. The back plate is optional and has a dovetail cut to allow fitment onto a Bambu printer plate. Print then superglue parts together.

Pac Man Wall Hooks remix 200% larger assembled in studio and setup for multiple color printing

Hooks

19evdominta3

This provides a number of 10 x 10 / 8 / 6 / 4 / 2 HSW panels - each provided as a different plate based on the requested size. It allows you to adjust the width of you allowable storage wall. Assuming that as a base you use the 10x10 model (the standard size for X1/P1 printers), these would allow you to adjust in the X direction in increments of 2 hexagons.

HSW Sizes 10 x 10 / 8 / 6 / 4 / 2

dakin80

A gridfinity compliant storage area for the top of a Bambu Lab X1-Carbon. Still permits access to control buttons on top of printer.Has cutouts for 6mmx2mm circular magnets.&nbsp;As well as the set of gridfinity mounts there are holders for two Bambu Lab glue sticks and one holder sized to accept the Bambu Lab scraper in its holder.&nbsp;Printed with support enabled as there are overhangs on the components for the top of linking prongs and the cutout on the bottom for the glass lid handle. The parts should fit together snugly but the halves can be permanently glued together if required.&nbsp;Some gridfinity bins you might find useful:&nbsp;Tool bin:<a target="_blank" href="https://makerworld.com/en/models/84735" rel="nofollow noopener">https://makerworld.com/en/models/84735</a>&nbsp;Soldering tip bin:<a target="_blank" href="https://makerworld.com/en/models/84731" rel="nofollow noopener">https://makerworld.com/en/models/84731</a>&nbsp;Precision screwdriver bin:<a target="_blank" href="https://makerworld.com/en/models/84730" rel="nofollow noopener">https://makerworld.com/en/models/84730</a>&nbsp;Soldering tool bin:<a target="_blank" href="https://makerworld.com/en/models/84744" rel="nofollow noopener">https://makerworld.com/en/models/84744</a>&nbsp;&nbsp;&nbsp;

Gridfinity baseplate for Bambu X1-Carbon printer

Gridfinity

Dr Operator

UPDATE 6/21/2024: The following changes were made based on feedback that I&#39;ve received.                                                                            - Increased the contact area of the slots on Waist 3 to help with stability.                                      - Adjusted plate #6 to prevent overlapping of calibration lines when using an X1C.                                      - Increased the circumferential height of both faces to prevent tilting when installed.                                      - Added additional supports to the chest.                                      - Added an additional magnet to the chest and door to help keep the door closed.                                           - Reduced the length of Hand 1 by 10%                UPDATE 5/17/2024: Seriously, all of the necessary supports have been added thanks to @SirWaynesworth and @SrGrinch. UPDATE 5/16/2024: I&#39;ve added supports for the head as per the feedback that I&#39;ve received.  I&#39;m having a lot of fun designing stuff around the MakerWorld hardware kits and up next is a Cogsworth clock using the Clock Components Kit 011 and 4x2 mm Round Magnet (20PCS) - CA001. Links to purchase both of those items are in the Bill of Materials list down the page further. When I got the hardware kit in my hands for the first time, two ideas came to me right away. This is the bigger, more complex of the two ideas. If you&#39;re not familiar with Cogsworth, he is a character from the classic Disney movie Beauty and the Beast. Notes:<ul><li>I made a “happy” face as well as the unimpressed face and the faces can be swapped at any time.</li><li> Fully assembled, it stands 312 mm or just over 12&#34;.</li><li>The Door Window colour is listed as white in the profile because there is no colour option for Transparent PLA in Bambu studio</li><li>This was fun, we should do it again sometime.</li></ul>&nbsp;Filaments used: Bambu PLA Basic - GoldBambu PLA Basic - Black Bambu PLA Matte - Dark BrownBambu PLA Matte - Desert Tan Eryone PLA - White AMZ3D PLA - TransparentAMZ3D PLA - Sakura Pink&nbsp;<figure class="image image_resized" style="width: 45.37%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-21_862053b705ab98.png"></figure>ASSEMBLY: Assembly shouldn&#39;t take long at all and while technically you don&#39;t need super glue, it is recommended for certain parts. Start with the face. For this you will need the Clock component kit, both hands, both nose pieces and the face you want to use. Insert the clock component into the back of the face and secure it with the nut that comes with the kit. From there, slide the hour hand onto the face followed by the first nose piece, the minute hand and finally the nose cap.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_2b963bbc1511c8.png">  <figure class="image image_resized" style="width: 37.41%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_ef73d37de10038.png"></figure>&nbsp;&nbsp;Now we&#39;re going to assemble the head. You will need all of the head pieces and the face. Start by fitting all four Head 2 pieces into the top of the head and then fitting Head 4 on top.&nbsp;<figure class="image image_resized" style="width: 62.78%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_34e58fcd8f6178.png"></figure>&nbsp;&nbsp;From there, slide the face into the back of the head and push it forward as far as you can. The back of the head attaches via magnets. When setting the magnets into the head and the back of the head, make sure you have the polarities correct. Once you have the head together, set it aside for now.<figure class="image image_resized" style="width: 71.85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_daa109bace958.png"></figure>&nbsp; For the lower body, you will need all four feet as well as all four waist pieces. Fit the waist pieces over the feet as seen below, and I would highly suggest gluing that top piece down.<figure class="image image_resized" style="width: 65.32%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_e09bdb358c1618.png"></figure>&nbsp; Next up is the door. You will need the door, the door window and the Neck. The neck fits into the door and then the window attaches to the inside of the door, securing the neck in place.<figure class="image image_resized" style="width: 73.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_a64261c168d348.png"></figure>&nbsp;&nbsp;Now we&#39;re going to connect everything together. Start by attaching the legs/waist to the body, and I would highly suggest using glue to secure those pieces together. After that, attach the Arms to the body as seen below.<figure class="image image_resized" style="width: 83.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_e0147e75409638.png"></figure>&nbsp; Attach the head to the body with glue being highly recommended for securing the head to the body. Last thing to do is to connect the door. The hinge on the door itself has little notches and the body and door snap together using those notches.<figure class="image image_resized" style="width: 55.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_8e84ca12c1f21.png"></figure>

Clock Components Kit 011: Cogsworth

Components Kits

hollowmaker

Experience the thrilling moment of a space shuttle launch with this stunning 3D-printed model, designed to captivate space enthusiasts and model builders alike. The model features a realistic space shuttle taking off amidst billowing, illuminated smoke. The magic happens when you place a flickering LED tea light underneath, giving the illusion of glowing and dynamic smoke as the shuttle ascends.&nbsp;Model Variations:This model comes in two versions to suit different 3D printing capabilities:&nbsp;AMS Version:For those equipped with AMS (Automatic Material Switching), this version includes detailed black rings on the boosters and the iconic black heat shield on the shuttle. This adds an extra layer of realism and detail to your model.&nbsp;Non-AMS Version:If you don&#39;t have an AMS, no worries! This version is simplified, omitting the black rings and front shield. Despite these minor adjustments, it still maintains an impressive look and ensures easy printing for all users.&nbsp;Components and Assembly:The &#34;Space Shuttle Launch&#34; model is made up of 6 individual parts, all precisely designed to fit together seamlessly. To assemble, you&#39;ll need a bit of glue – we recommend using glue that isn’t too runny to ensure a firm hold.&nbsp;Please insert the model onto the cloud base immediately after applying glue, before it dries. If you wait until the glue dries, the gaps between the holes might no longer align precisely, which can cause issues when you try to attach the rocket to the base.&nbsp;Glue is not necessarily required: You can assemble the individual parts without gluing them, but they might fall apart with vibrations or shaking :)&nbsp;Assembly Steps:<ol><li>Simply follow the natural fitting of the parts; the assembly process is straightforward and intuitive.</li><li>After gluing the components, place the fully assembled shuttle onto the smoke base.</li><li>Insert a flickering LED tea light into the base, and watch as your model comes to life with a mesmerizing glow.</li></ol>Features:<ul><li>Illuminated Smoke Effect: The model is designed to accommodate an LED tea light, creating a fantastic flickering effect that mimics the fiery thrust of a real launch.</li><li>Easy Assembly: With only 6 parts to put together, the assembly is quick and hassle-free, making it perfect for beginners and experienced model builders.</li><li>Detailed Design: The AMS version includes extra detailing to enhance the realism, while the Non-AMS version offers a simpler, yet still striking, appearance.</li></ul>&nbsp;Perfect For:<ul><li>Space enthusiasts and collectors</li><li>Educational displays and projects</li><li>Decorative pieces for your home or office</li><li>Gifts for fans of space exploration and 3D printing</li></ul>&nbsp;Get ready to launch your own Space Shuttle!

Space Shuttle Launch (AMS not required)

Tdire

This is the second version of my original T-shirt folding tray. This version is quite sturdier and fully customizable to fit any shirt size.&nbsp;*** MAKE SURE TO CALIBRATE YOUR FILAMENT FLOW CORRECTLY BEFORE PRINTING ***&nbsp;Calibration is important as there is no tolerance on any plugs to ensure they will not detach easily.&nbsp;This version works significantly better than the last, and you can even continue adding extensions so that it folds the shirts to the width that you like and folds any size shirts as well.&nbsp;You can message me if you have any questions!&nbsp;Part List:&nbsp;Main Body: 6 TimesMain Body Extension Left Side: 4 TimesMain Body Extension Right Side: 4 timesMain Body Extension Top: 6 TimesMain Body extension Bottom: 6 TimesMain Body Top and Bottom Left Extension: 8 TimesMain Body Top and Bottom Right Extension: 8 TimesHinge: 6 TimesLarge Attach: 4 TimesPlug: 50 Times

T-Shirt Folding Tray, Any Size Shirt Version 2.0

Tools

Pork3D

Keep your headphones organized and within reach with our Headphone Holder Desk Clamp! This convenient accessory keeps your workspace clutter-free and your headphones secure. Printing No supports needed

Headphone Holder Desk Clamp by Pork3D.com

Desk

mcgybeer

The original Articulated Shark is finally on MakerWorld!&nbsp;XY compensations have been tuned because Bambulab printers are way too precise 😂 (and this model was designed back in 2019). Note that the upper teeth rely on the bottom ones to be printed, that&#39;s why a well-calibrated gap is so important. If it fails or it is too hard to open the jaw feel free to adjust the XY compensations yourself. I&#39;ve provided a head so you can test the settings without wasting too much material.&nbsp;4 Versions available:<ul><li>Shark A: Original design, movable jaw</li><li>Shark B: Friendly face, movable jaw</li><li>Shark C: Original design, NON-movable jaw</li><li>Shark D: Friendly face, NON-movable jaw</li></ul>After printing, the tail and the jaw should get free with a little force (a small knife may help you for the teeth): <a target="_blank" href="https://youtu.be/14z1ll9yMmU" rel="nofollow noopener">https://youtu.be/14z1ll9yMmU</a>Then just enjoy it, even in the water!! <a target="_blank" href="https://youtu.be/E1W-RyH8bGA" rel="nofollow noopener">https://youtu.be/E1W-RyH8bGA</a> <a target="_blank" href="https://youtu.be/aV-XhMr7Edc" rel="nofollow noopener">https://youtu.be/aV-XhMr7Edc</a>&nbsp;Check here for <a target="_blank" href="https://www.mcgybeer.xyz/commercial-license" rel="nofollow noopener">Commercial License</a>