lexpuddy

reddadsteve

Base for the characters of "Tom and Jerry" cartoon series created by Hanna and Barbera for MGM.The series features comic fights between an iconic set of adversaries, a house cat (Tom) and a mouse (Jerry). The plots of each short usually center on Tom's numerous attempts to capture Jerry and the mayhem and destruction that follows.No supports are required. If you have the proper filament colors, no painting is needed.The assembled base is 105mm tall.---------------------------------------------------------------- The full Tom model:<a href="https://www.printables.com/model/518371-tom-cat" rel="nofollow">https://www.printables.com/model/518371-tom-cat</a> The full Jerry model:<a href="https://www.printables.com/model/536749-jerry-mouse" rel="nofollow">https://www.printables.com/model/536749-jerry-mouse</a>---------------------------------------------------------------Enjoy!...........................................................................................................Special shoutout to maker Benoît Lussier for providing QA printing and quality feedback............................................................................................................**Print Instructions:** Supports: No Resolution: .2mm Infill: 15%*************** For all my models: Do not enable 'Detect bridging perimeters'. This is a parameter that PrusaSlicer 2.6 enables by default. Do not enable 'thick bridges' Do not set 'arachne' for perimeter generation. PrusaSlice selects this option this by default Do not enable 'detect thin walls'. ***************Refer to the notes below for a few helpful printing and assembly instructions............................................................................................................ **Building the model**ColorsBlack: (Paramount3D PLA - Black) base_wall (see notes for layer change colors) base_hole ..Red: (Hatchbox PLA - True Red) base_wall (see notes for layer change colors) ..Wall color: (Devil Designs PLA - Vanilla) base_wall (see notes for layer change colors) ..White: (Overture PLA - White) base_moulding_right base_moulding_left ..Floor: (PolyTerra PLA - Army Brown) base_floor .. ...........................................................................................................**Printing and assembly tips**Printing tips:Due to slicers being continuously updated with new features and default profiles being changed over time, I've found some incompatibility with some new parameters that some slicers now enable by default. These parameters affect the printing quality of some parts of models that I post. To ensure continued ease of printing:**************************** 1- Do not enable 'Detect bridging perimeters'. This is a parameter that PrusaSlicer 2.6 enables by default which adversely affects built-in support separation. 2- Do not enable 'thick bridges'. This parameter also severely affects built-in support separation. 3- Do not enable 'detect thin walls'. This parameter affects some of the finer details of some parts. 4- Do not set 'arachne' for perimeter generation. PrusaSlicer selects this option by default which also affects some of the finer details of some parts. ****************************1 - No supports are required.2 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative to ensure the least chance of a print failure, especially since the base of many parts are hidden when inserted into another part. *I did not use any brims or rafts for this model3 - The wall requires color changes as follows: Start with the basic wall color of your choice Layer height 4.2 mm is the first change to red Layer height 4.8 mm is the second change to black.4 - Since this model is not based on any actual scenes from the cartoon, colors are completely optional. My wife even suggested some sort of wallpaper for the wall!.. Assembly tips:1 - The base is straight forward to build. The two characters can be positioned and glued at your discretion.3 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.Do not hesitate to ask questions, feedback is essential to making better models.&nbsp;

Base for Tom and Jerry

figures

FlorinV

Please use "Last version” profile, it contains the updated version with smaller gaps, to be sure no cable will slip, or download the files and print them.The Fast profile uses 0.2 layers, but for a better looking print you can use 0.1mm layer.&nbsp;Simple and clean cable holder. I've tried others, but i wanted one with a bigger surface to be used with double sided tape. (no screws or permanent glue on my furniture) The smaller ones I've tried didn't hold in time. Simple to print, no support etc. I've used 0.12 layers because it's a fast print anyway, but you can print it however you prefer. Printed standing up. Please check my new Phone/Cable holder: <a target="_blank" href="https://makerworld.com/en/models/98276#profileId-104752" rel="nofollow noopener">https://makerworld.com/en/models/98276#profileId-104752</a> <img src="https://makerworld.bblmw.com/makerworld/draft/378859/2023-12-18_6857d608bb233.jpg" alt="Phone / Cable Holder - Wall/Furniture Mount ">&nbsp;Updates:<ul><li>29.10.2023 - on request, added a file with 2 mounting holes (4mm). Download file Cable holder with mount holes.stl</li><li>11.08.2023 - Based on feedback, changed both files to have smaller gaps for the cables. </li></ul>

Cable holder 

Qwer.Tzui

Simple Darts Display for 9 darts.&nbsp;There are 2 Versions:<ul><li>Autodarts logo “plain” for 2 color print</li><li>neutral “DARTS” text</li></ul>Mounting screws have a distance of 5cm in between.

Darts Display "Autodarts"

darts

tkepler2007

AMS adapter ring for Elegoo carboard spools. The spool diameters tend to vary by a few MM so I have uploaded a smaller and a larger version.

Elegoo AMS Spool Adapter - Large & Small Sizes

spool ring

MoltenPlastic3D

UK light box, it will use almost all of the possible build volume. I make my boxes with a power switch, plug, and ac adapter for a cleaner more professional look. I also included my light box profile which helps to eliminate pinholes and wisps so feel free to try that out on the front plate. For the base and back I tend to just use the base bambu .20mm height profiles. I will include links to the hardware I use for mine. I included a solid backplate for you to use add a negative modifier for whatever light setup you already have as well.&nbsp;AC Adapter: <a target="_blank" href="https://amzn.to/47WA4v4" rel="nofollow noopener">https://amzn.to/47WA4v4</a>Female Plug: https://amzn.to/48XxIxrSuper Bright LEDs: <a target="_blank" href="https://amzn.to/3SyCX0F" rel="nofollow noopener">https://amzn.to/3SyCX0F</a>Switches: https://amzn.to/4bb2zrT

UK University of Kentucky Light Box

Marc Elbichon

🐈🐭 There are other variants, checkout <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/528929" rel="nofollow noopener">the entire collection</a>!🎅🦹♀️🧛🧝 Other characters in <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/594647" rel="nofollow noopener">this collection</a> !&nbsp;Update 2024-02-02: V2 - Redraw from scratch, scale up a little bit Jerry for better details, separate stl files&nbsp;I like the original model but add some issues with it, I rework the stl splitting and painting for better result.&nbsp;Simply print and put at a bottom of a wall, shelf, etc.. with a piece of double sided tape

Tom and Jerry Decorative Wall Hole

gifts

Wcad00

UPDATE 9 - 25.03.2024<ul><li>updated profile REQUESTS - added plate 17 - user @gurthyy  wanted a new module to accomodate a mac mini on its side - added a new two space combo module for mac mini and keyboard/mouse</li><li>updated profile REQUESTS - added plate 18 - user @wmeringolo wanted a new module for miniature painting  - added a new combo module for cup + brushes</li></ul>&nbsp;UPDATE 8 - 16.03.2024<ul><li>updated profile REQUESTS - added plate 13 - user @bambibam  wanted a new combo 1x module for sd/ microsd/usbA/ usbC  - so there is a new combo module available</li><li>updated profile REQUESTS - added plate 14,15,16 - user @gurthyy wanted a way to angle the organizer after specific desktops - introducing Pizza Slices - angled 30degrees modules coming in two snap-on formats for now, but with room for much more customisation. Plate 14 has the universal pizza slice base + simple catch all top; plate 15 has an split/organized top, and plate 16 has a slide-on interchangable name plate - see photos in print profile. Everything was printed and tested for a perfect fit - check photos</li></ul>UPDATE 7 - 05.03.2024<ul><li>updated profile ACCENTS - user @Xanders_Builds noticed an issue i missed with the ‘’steps' accent brims not fitting corectly - too loose - now it is updated and fits fine</li><li>updated profile REQUESTS - added plate 10 -one new module  ASP @user_2207529250  and @bluebeansisradi requested a stand for a ps5 and xbox controller - new module that occupies two spaces and needs to be snapped into place - stand for ps5 and xbox controller - i tested a ps5 controller but i dont have a xbox, but it has some tollerance so it should fit fine - in case it does not, i made the module from two parts , so the stand can be exchanged - please let me know if that is the case</li><li>updated profile REQUESTS - added plate 11 -one new mod  for DRAWER MAX. user @Nerraw asked for a method of separating the drawer into smaller spaces - i made a very simple method of doing that - 4 interconnectible separators that can also be printed individually or by neccesity i guess</li><li>updated profile REQUESTS - added plate 12 -one new module User @zach13 asked for a method of organizing documents vertically so this is my take on it. The iddea was to make it sturdy because it is a little tall and not to waste too much material - it is made from 3 pieces - a base plate and to organizing stands that fit slightly different from each other so that the papers will stay a little cuved to maintain vertical position</li></ul>&nbsp;UPDATE 6 - 15.02.2024<ul><li>updated profile REQUESTS - added plate 7  - Reinforced top plate for the DM. @bosho.liviu requested a top plate so modules could be placed on top - Now you can do that, it is symetric and compatible in every direction</li><li>updated profile REQUESTS - added plate 8,9  - Two new modules . @bdwilson asked for two modules that have removable interior trays - plate 8 has a new 1space tray module and plate 9 has a new tilted marker combo with one large tray on the bottom. The front part of the removable tray is also slanted for easy removal</li></ul>&nbsp;UPDATE 5 - 11.02.2024<ul><li>updated profile REQUESTS - added plate 5  - Tough Plate for the DM. @Heimwerkerbienchen requested a tougher top plate so monitor could pe placed on top of the DrawerMax - has all the toughness required bells and whistles but i really cant guarantee how it will hold up in time - in my oppinion the entire assembly should be printed in a tougher filament, because altough the new plate has a support structure, the drawer modules themselfs are pretty thin so the weight of the monitor will be on the walls</li><li>updated profile REQUESTS - added plate 6  - Half Bow ties. @bdwilson had a very good ideea to close the holes on exterior modules so introducing half bow ties </li></ul>&nbsp;UPDATE 4 - 28.01.2024<ul><li>updated profile REQUESTS - added plate 4  - Steps + Tape dispenser combo unit. altough it was not a request, the plate has the name of the user that gave me the ideea - thank you for that @lilrepete</li><li>the new module is compatible with existing ACCENTS, plus the security wheel and the blade can be printed in other colours to keep things fresh</li><li>the blade slides into the module and is interchangable in case teeth break or you just want another colour. if you feel it fits too tight just trim the seam of it and it will slide more easily</li></ul>UPDATE 3 - 23.01.2024<ul><li>updated the printing order to outer/inner - not a big issue but some had problems - now all is well</li></ul>UPDATE 2 - 22.01.2024<ul><li>added a new print profile called ACCENTS</li></ul>In keepign with the modularity theme and ultra customizability i aim to develop, i made some mix or match brims to add an extra touch of colour to your organizer. everything fits in place without glue or force and same as everything else it is easily changable in case you want to switch up your look and keep it fresh.photos attached in the profile so please check them out. i know the colours i actually printed are not the best but it was all the filament i have till i get my new shipment&nbsp;UPDATE 1 - 19.01.2024<ul><li>added a new print profile called DRAWER MAX</li></ul>it is a drawer module that occupies 4 slots, is stackable and also highly customizablethe first tray for it, as you can see in the pictures is for the spare parts that come with the BambuLab printer + some extras. Fits the parts for two printers.make sure you follow the instructions in its profile to get perfect fits everywhere<ul><li>added a new print profile called REQUESTS</li></ul>this profile contains the user requests for modules. each plate will have the users name on it. this is going to be the profile i will update regularly, based on requests.&nbsp;&nbsp;I’ve been wanting to do this project since I made the first desktop organiser.The problem I wanted to address was, what if in a month you want or need something else, more, or less space, something specific, more room for usb, cards, crayons, etc, how do you keep a new look with minimal to no effort?&nbsp;I’ve seen there have been many attempts to do this but none really took of, so I asked myself why? I think the main reason was lack of interest derived from lack of support. If newer modules aren’t created, interest goes down, and it becomes the same thing as a normal organiser.Of course we have the gridfinity system witch is great honestly and other similar to it, but they all rely on the same premise, a base to keep everything together, so if you are full, you need another base, but does the base you need right away exist? or are you going to be left with extra slots.&nbsp;Maybe I didnt do my research right, and there are other options, all I tried to do was to make something universal, easy to print, elegant, very customisable, and most of all, something that doesn’t depend on screws, magnets and on a base to keep it all tied. I printed 10 bowties In less than 20 minutes on standard, and hold together 7 modules (the ones I use) and you can lift and move them as a whole, without having them fall or break&nbsp;The bow tie joint isn’t my ideea, it’s been used in woodworking for centuries. It is a robust way of holding things together and works quite well here too, especially printed the way I arranged it on the plates . All the modules can be connected in whatever orientation you want, except the laptop stand, because it needs room on the small sides for the length of the laptop/tablet. But that is it - I kind of made that specifically for me, because I use it as an end piece that fits under my P1S (like my first organiser)&nbsp;I am starting with 12 modules and will make a new one every other week, based on suggestions I hope, because I dont think I have enough creativity. I will put out my own ideas because I do have more, but everyone has diferent needs so if you think you can get on board with the ideea I welcome all input, and I will try to make whatever you want. Remix culture is strongly encouraged.&nbsp;Modules in the 3mf:&nbsp;PLATE 1<ul><li>Usbcombo1 (11 usb sticks + 5 full size memory cards + tray for usb caps)</li><li>Phone combo (fits iphone 15 promax + airpods pro)</li><li>Post-its (two full size stacks of postits)</li><li>Steps (4 equal holders - superglue, ties, hex set, mini uv lamp)</li></ul>PLATE 2<ul><li>12 bow tie joints - enough for about anything</li></ul>&nbsp;PLATE 3<ul><li>Hex single - roomie organizer - can be further split with the splitters on plate 8</li></ul>&nbsp;PLATE 4<ul><li>Laptop wedge - macbook pro + ipad pro 12.9 + apple microfiber slot - made to be wedged under the x1 or p1</li><li>Laptop standard - - macbook pro + ipad pro 12.9 + apple microfiber slot + additional slot</li></ul>PLATE 5<ul><li>Tilted marker combo - 12 thick markers + pens and other + paperclip 3 + misc tray</li></ul>PLATE 6<ul><li>apple watch dock double - 2 apple watch charger pucks - like the original - cable management + full size post it tray</li></ul>PLATE 7<ul><li>Hex double - double the size of the single - can be further split with the splitters on plate 8</li></ul>PLATE 8<ul><li>5 split plates for the hex series</li></ul>PLATE 9<ul><li>apple watch dock single - 1 apple watch charger puck - like the original - cable management</li></ul>PLATE 10<ul><li>Usbcombo A - 6 usb sticks + 5 full size memory cards + tray</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

The Organizer

organization 

BEAMink

NEW V2 @https://makerworld.com/en/models/70149#profileId-74470&nbsp;This is a version of a deburring tool I made. Fits standard deburring bits.You can get the bits at this link.&nbsp;<a target="_blank" href="https://a.co/d/eMfLUbm" rel="nofollow noopener">https://a.co/d/eMfLUbm</a>&nbsp;The Male threads are a little hard to get started. You may need to cut the start of the thread as it gets closed up when printing.&nbsp;&nbsp;

3D Printing Deburring Tool

tools

dakjones82

<h2>3D MODEL DESCRIPTION</h2>Track map wall art for racing enthusiasts! Models range from 180 -250mm wide but can be scaled or broken up for your needs. Use wall-safe double-sided tape for wall adhesion with mess/damage-free removal.<h2>3D PRINTING SETTINGS</h2>.20 layer height 15-20% infill 2-3 walls Pause for filament change at nameplate start Iron top layer only for a clean smooth finish

Nurburgring Track Map (Multi Color with Nameplate)

man cave

agepbiz

I wanted to recreate one of the toys from my childhood but designed it as a print-in-place model.<figure class="media"></figure>I made two 3d printable versions where one is completely print-in-place and a version where you can snap-fit some colors onto it. -no support structures -0,15mm layer heightSubscribe or follow me on Instagram: <a href="https://www.instagram.com/agepbiz/%E2%80%8B" rel="nofollow">https://www.instagram.com/agepbiz/</a> Twitter: <a href="https://twitter.com/agepbiz" rel="nofollow">https://twitter.com/agepbiz</a> This was 3d printed on a Prusa Mini+ using Fillamentum PLAI recommend printing the “snakeinplace_testpart.stl” first to make sure your printer can handle the clearance between the articulated parts. PLA wears down over time due to friction so the joints might become loose

snakeinplace - Print-in-place and Articulated Puzzle Toy

fidget

PrintThatBoii

This is a scalable Christmas tree with shoes because everything is better with some shoes and a face XD. The first tree is at scale 75% the middle is at 100% and the right one is at 50%. You can go bigger if you want. note that the smaller you go the harder it is to get the shoes in. At the scale of 50% you have to push a bit harder than the one on 100%. 3D PRINTING:You can print this with a layer height of 0.2 (for the 50% tree and the shoes) or 0.3mm. You don’t need supports. I would recommend dropping the shoes 1mm lower in the slicer as the shoes are a bit too round in the front. I printed them with 15-20% infill (trees and shoes). If you read this in December, Happy Christmas! &nbsp;I borrowed the shoes from @FatherLicorice and his cute little ghosts. &nbsp;

Cute Christmas tree with shoes

Christmas

Willi 3D

Create your BaBo organizer! A system created to store them all!&nbsp;Description:This is the BaBo drawer module 30. The drawer module is the heart of the system as it carries the inserts and is therefore the main page of the system.&nbsp;The usable dimensions of the drawer are 240x210x30. The drawer has space for 8x7 inserts. The inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.&nbsp;BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer.&nbsp;It was important to me that even newbies could print and use the system, which is why all parts are printed without support and the parts are already pre-sliced.&nbsp;Furthermore, all inserts for the accessories and tools that the printer comes with are free. Only the special modules and inserts are only accessible to members of my club. The purpose of the club is to promote my work and to reduce the costs that I incur. I would also like to find people who are interested in expanding this system.&nbsp;The entire system uses only 1 type of screw, M3x8 countersunk screws.Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2023-09-20_95fdae0c8d181.jpg"></figure>Update:(13/09/23)<ul><li>Assembly optimizations</li></ul>(31/10/23)<ul><li>improved connection between modules</li><li>easier to push back the drawer</li><li>print profile optimizations</li></ul>(26/01/24)<ul><li>design optimizations to prevent warping</li></ul>&nbsp;Printing:Layer height: 0.2Supports: NoBrim: NoMaterial: all&nbsp;Assembly:Follow the instructions in the picture.<ul><li>printed parts</li><li>16 x M3x8 countersunk screws.</li></ul>If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!&nbsp;Clubcontent:<figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2024-06-13_ccadb89c071b7.jpg"></a></figure><figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2024-06-13_c05e6d1cbb9c7.jpg"></a></figure>