lewiscollins03

Sprenger

My own design of a bolt sorting plate. Similar to the preloaded one in the P1 and X1 printers but with extra features.Can measure bolt diameters up to m12, bolt length up to 100mm and 4 different thread pitches. Also includes 6 holes in the back for 5x3mm magnets to be glued in if you wanted to stick it to your fridge or toolbox.I only included 4 thread pitches because anything under m8 only has one pitch, and there's only 4 possibilities for thread pitches between m8-m12.Default print settings on my P1S made it plenty strong and plenty readable.Could probably fiddle with wall thickness and infill % to get the print time down and/or strength up, but it's not necessary.I don't know how the 1.0 threads would go with a layer height above 0.2mm, but you can obviously try.

Bolt Sorter With Thread Pitch Gauges

Tools

LayerCake

A basic Gridfinity Parametric Container done in Autodesk Fusion and now updated with an identical OpenSCAD project for even easier customization.&nbsp;Based on the excellent Gridfinity system by Zach Freedman Wiki: <a target="_blank" href="https://gridfinity.xyz/" rel="nofollow noopener">https://gridfinity.xyz/</a>&nbsp;Differeces from the standard design:<ul><li>The lip has an added 0.4 mm flat section on top.</li><li>The screw holes are tighter and have a step pattern for better printability.</li><li>The base units can be overwritten which breaks compatibility but can use all space available.</li></ul>Some preconfigured models were added in height increments of 3U ranging from 1x1x3 to 4x4x9.For other sizes just use the Customize button or configure your own through Autodesk Fusion. Please do not share print profiles here that break compatibility. Label print profiles well according to their settings. All profiles shared by me use the default settings aside from gridfinity units.<h2>OpenSCAD</h2><h3>Customization Options</h3>The basic customization starts at the width, depth, and hight of the container in gridfinity units. Additionaly the hole pattern for screws and magnets can be configured or completely removed.On to of that the base units for the grid can be redefined. This will break compatibility with the standard gridfinity baseplates etc. but will allow for much more flexibility when filling a drawer completely with containers.An equally modifiable base grid can be found in my other models <a target="_blank" href="https://makerworld.com/en/models/476846" rel="nofollow noopener">here</a>.<h2>Autodesk Fusion</h2><h3>Configuration</h3>Open the file in Fusion and adjust the size as needed.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000025376/design/2023-09-27_j5pt2zi2pyal.png"></figure>By default the magnet hole diameter is tighter than the standard 6.5 mm of the Gridfinity design as I found this to fit better. The depth has also been changed from the default 2.4 mm.<h3>Fusion Error</h3>If you design a 1x1 container the file will throw an error but the output should still be generated just fine. This is due to a pattern that no longer can be applied. If there is a way to suppress this let me know in the comments.<h2>Notes</h2>The Autodesk Fusion version was made with the personal version therefore non commercial only.The OpenSCAD version is licensed as MIT.Source files included.

Gridfinity Parametric Container

Gridfinity

Mahave

If you don't have any space on the left side of your printer, you can print a poop box to go behind it instead. This is a larger version of the original poop box with more space for poop, but it is still slim (50mm deep). UPDATE - VERSION 2 From feedback I have received and my own observations. the model has now been total redesigned and the wall to catch the poop has become bigger and catches better, so that it does not end up behind the poop box

Poop box right side XL

Print Parts

Tabletop Guitar FX Pedal Stand

Bedside Table Remote Control Tray