lesprit

The Crafty Maker

Illuminate your holiday season with this enchanting tealight Shade in the form of a Christmas tree. The delicate white wall plates create a festive ambiance, adorned with intricate holiday decor that comes to life in the dark. At the tree's pinnacle, a gleaming golden star adds a touch of elegance. Perfect for tabletops or any corner in need of a magical holiday touch, this Tealight Shade combines convenience with festive cheer for a delightful Christmas atmosphere.&nbsp;I've used the following colors:<ul><li>Tree: Prusament PLA Opal Green</li><li>Star + star bottom: Fillamentum PLA Extrafill Gold Happens</li><li>Plates: Sunlu PLA+ White</li></ul>The star needs to be glued into the star bottom to create the star assembly. The star assembly can be glued onto the tree if the pin is too loose.&nbsp;Print the plate 6 times. The plates should be placed into the grooves in the tree. Press firmly until you hear a click. No glue needed.&nbsp;Print settings&nbsp;Tree<ul><li>No supports</li><li>15% infill</li><li>Arachne wall generator recommended for better dimensional accuracy.</li></ul>Plates + Star<ul><li>No supports</li><li>100% infill</li></ul>Star bottom<ul><li>Default supports</li><li>100% infill</li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Christmas Tree Tealight Shade

christmas

blecheimer

This is a toy plane that is based on the famous Boeing Stearman Model 75 biplane. <a target="_blank" href="https://en.wikipedia.org/wiki/Boeing-Stearman_Model_75" rel="nofollow noopener">https://en.wikipedia.org/wiki/Boeing-Stearman_Model_75</a> The toy plane has a wingspan of 240mm and a length of 196mm. It can be completely assembled without using glue. All necessary clips and bolts are printed. I even included a small screwdriver.&nbsp;Use the following settings for the wings: 0,12 layer height, 4 walls, 4 bottoms, 8 tops, 16% gyroid infill The rest can be printed with 0,2 layers, 4 walls, 4 bottoms, 5 tops, 6% gyroid infill. I recommend a brim only for the bolts. See my 3mf for more details and how I positioned the parts on the build plates.&nbsp;Print the following parts with support:<ul><li>Fuselage (only for the cockpit)</li><li>Wings (only for th bottom of the threads)</li><li>Engine (not for the thread)</li><li>Bolts (only for the head)</li><li>Struts (use small tree support)</li><li>Supports (use small tree support)</li><li>Cockpit (only for the bottom of the thread)</li></ul>Do not use support on the threads.&nbsp;All parts will fit into a 200x200x200 build space.  A1 mini users need to split the wings into two parts (can be done with Bambu Studio) and glue them together after printing.&nbsp;For assembly follow these steps:<ul><li>put the front cover on the engine</li><li>screw the engine to the fuselage</li><li>insert the cockpit into the fuselage and secure it with a short bolt</li><li>insert the lower wing into the fuselage and secure it with a short bolt</li><li>insert the rear wing into the fuselage and secure it with a short bolt</li><li>this is now a bit tricky: insert the middle supports into the fuselage and put the top wing on the supports</li><li>now put one strut between the lower and top wing</li><li>insert a long bolt through the lower wing into the strut and screw it to the top wing</li><li>repeat for the other side</li><li>clip the propeller and the wheels with the pins to the plane</li><li>make funny engine noises and play with your new plane  </li></ul>Update 2023-12-11:Thanks to sgioja and CatWhisker I was able to correct two design flaws (cockpit + wings) and re-oriented the wing support in the print profile. The STLs and the print profile have been updated accordingly.&nbsp;Update 2024-02-17: User doppelt-05 made a very creative add-on to this model. He added a pinwheel propeller so that the propeller spins when the wind is blowing. You can find his model here on makerworld: <a href="https://makerworld.com/en/models/190364#profileId-210130" rel="nofollow"> https://makerworld.com/en/models/190364#profileId-210130</a>&nbsp;&nbsp;Disclaimer: This work by blecheimer is licensed under <a target="_blank" href="https://creativecommons.org/licenses/by-nc-nd/4.0/" rel="nofollow noopener">CC-BY-NC-ND 4.0</a>. You are not allowed to copy this model to other 3D printing websites without my permission.

Boeing Stearman 75 Toy Plane

Olivier3dPrint

A deatshstar lamp from the starwars saga&nbsp;Stand can be found here : <a target="_blank" href="https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files" rel="nofollow noopener">https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files</a> &nbsp;You can buy me a Tea (i do not like coffee ;) ) here <a target="_blank" href="https://ko-fi.com/olivier3dprint" rel="nofollow noopener">https://ko-fi.com/olivier3dprint</a>&nbsp;If you want using the BambuLab Led Kit 001, <a target="_blank" href="https://makerworld.com/en/models/431731#profileId-336300" rel="nofollow noopener">i made on for this</a>

StarWars deathstar lithophane lamp

lamp

TrendtB

🎉 Party in 2024 with style! These aren't just any party glasses; they are a statement! For those who love to stand out, these spectacles are designed for you to mix and match colors for unique vibrant looks. Download the files now to start personalizing your own glasses, or design something for the theme of your party, and give your guests something memorable to take home! 🌈&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-06_4aa29e0cd22b2.gif"><figcaption>2024 Dazzling Party Glasses with articulating temples</figcaption></figure>&nbsp;Ideal for: New Year's Eve bashes, 2024-themed parties, photobooths, or any 2024 occasion where you want to shine! 🎆&nbsp;<h3>KEY FEATURES</h3><ul><li>Eye-Catching Gradient Effect: Leverage filament properties to create a dazzling gradient between colors,</li><li>Functional Snap-Fit Hinge: Easy to fold and unfold for convenience.</li><li>Comfortable and Wearable: Designed for prolonged use without discomfort.</li><li>Visibility Maintained: Enjoy the party fully, you can still see with these on!</li><li>Customizable Colors: Change 'Gradient-top' and 'Gradient-bottom' colors for unique effects (more detail below)</li><li>Low wastage: Reduced filament wastage by separating models and aligning color changes to layer-height</li></ul>&nbsp;<h3>✨DAZZLING GRADIENT✨</h3>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-06_b97bddd5fb28b.gif"><figcaption>Observe the color shift from red to yellow, without a gradient filament!</figcaption></figure>&nbsp;This design uses the semi-transparent properties of filament to create a dazzling gradient effect along the shutter lines. This was done by adjusting the model thickness in specific areas. You can experiment with filaments and create different effects by changing the filament assigned to parts of the model:&nbsp;<figure class="image image_resized" style="width:55.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-06_4324208dfc905.png"><figcaption>Adjust per-model materials by (1) clicking on Objects, then (2) selecting the relevant model and changing the assigned material.</figcaption></figure><ul><li>Gradient-Bottom is the bottom layer of the shutters, and most prominent for the lower 3 bands</li><li>Gradient-Top is on top of Gradient-Bottom, and progressively gets thicker (creating the gradient)</li><li>You can quickly assign materials by hitting the corresponding number on your keyboard (e.g. 1 = slot 1, 2 = slot 2, etc.)</li></ul><h4>Color combination ideas:</h4><figure class="image image_resized" style="width:78.81%;"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-06_20be23341c5f3.jpg"><figcaption>Example gradients: Snowy day, Sunset, and Tropical</figcaption></figure>&nbsp;<ul><li>Sunset - Red (Gradient-Bottom) to Yellow (Gradient-Top)</li><li>Snowy day - White (Gradient-Bottom) to Light Blue (Gradient-Top)</li><li>Tropical - Green (Gradient-Bottom) to Yellow (Gradient-Top)</li><li>Glowing - Any (Gradient-Bottom) to Glow (Gradient-Top)</li><li>Noir - Black (Gradient-Bottom) to White (Gradient-Top)</li></ul>You can also experiment with different properties; like metallic or sparkle fading to matte or transparent!&nbsp;<h3>ASSEMBLY</h3>Assembly is straight-forward. Each pair of glasses needs a complete frame, and one of each of the temples (left and right).Once printed, each temple will snap fit into the frame as shown below. This can be quite stiff and requires some strength to fit; but once fitted, you will have a strong and freely moving hinge for your glasses!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-06_6e5d045500038.gif"><figcaption>Snap-fit assembly demonstration. NOTE: Requires some force to assemble.</figcaption></figure>&nbsp;<h3>PRINT SETTINGS</h3>Use the original Designer profile to ensure success. If you're setting up your own profile for yourself, or to share - here are a few notes.<ul><li>Print Settings: 0.2mm layer height, 2 walls; no supports needed.</li><li>Material Advice: PLA works well, or switched PETG for enhanced durability, especially for hinges. DO NOT mix PETG and PLA for color layers, as you will encounter material adhesion issues. Stick to one type of filament.</li><li>Printing Tip: Ensure your filament is flow calibrated for optimal snap-fit hinge functionality.</li></ul>&nbsp;<h3>LOVE THIS DESIGN?</h3>You might also like my others:&nbsp;<figure class="image image_resized" style="width:56.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-11_f750488b35d1f.jpg"><figcaption>2024 Cuban Chain https://makerworld.com/en/models/89590#profileId-95895</figcaption></figure><figure class="image image_resized" style="width:57.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-11-24_760cf0b6bcdd1.jpg"><figcaption>If you like this design, you might also like my “Good Vibes Only” standing ornament available here: <a target="_blank" href="https://makerworld.com/en/models/72700#profileId-77228" rel="nofollow noopener">https://makerworld.com/en/models/72700#profileId-77228</a></figcaption></figure>&nbsp;<figure class="image image_resized" style="width:57.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-11-28_0945c860882f5.jpg"><figcaption>If you have spare Bambu Lab spools laying around and need a good labelling system, check out my Spool Label design available here: <a target="_blank" href="https://makerworld.com/en/models/76526#profileId-81100" rel="nofollow noopener">https://makerworld.com/en/models/76526#profileId-81100</a></figcaption></figure>&nbsp;&nbsp;

2024 Dazzling Party Glasses - Customizable multicolor

miniShev

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a target="_blank" href="https://www.patreon.com/minishev" rel="nofollow noopener">https://www.patreon.com/minishev</a>Patrons have access to all my files in one place, supported miniatures, a request board, as well as commercial options! Come check it out :-)

christmas

toy

lamp

etc

animal