Cece

3DLabs

Lego Batman

Lego

Bazzlington

Bring the magic of the wizarding world to life with our meticulously crafted 3D-printed based on Mad-Eye Moody&#39;s iconic magical eye from the Harry Potter series. This extraordinary piece is perfect for cosplayers, collectors, and fans who want to add a touch of authenticity to their costume or display&nbsp;I didn&#39;t require any glue for assembly, so hopefully be same for you.

Mad-Eye Moody's Magical Eye

Costumes

MEAF designs

Easy to print and fun to make!Perfect for your candy table, coffee table or any corner of your house&nbsp;&nbsp;Specially designed to fit in the buildplate of any mid size printer.The base is one piece. and every letter and details are separated files so you can print it in different colors even without an AMS.&nbsp;Designed two styles for every “O”. so you can choose what you like.<ul><li>First "O": choose between santa claus or tree ornament</li><li>Second “O”: choose between snowman face or snowman body</li><li>Third “O”: choose between reindeer or christmas elf</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_n84evi4tipld.gif"></figure>&nbsp;split the "Details" file in to parts with your slicer and just print the details you like for each one and glue them on top!<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_o1xtzxx4tz4i.png"></figure>&nbsp;&nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for letters and base. --- 0.2 for detailsNozzle diameter: 0,4mm or 0,6mmInfill: 10 -12%Perimeters: 2Supports: no&nbsp;Printing Tipthe tolerances are a little tight, so you will need some glue depending on your printer and/or filament calibration&nbsp;&nbsp;&nbsp;

Christmas hohoho Sign

Noël

3D Engineer

Use this stencil to beautify your notes, day planner or calendar!

Icon Stencil for: Notes - Calendar - Day Planner 

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

Matt

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ IIID Max Forest Green Transmission Distance: 5 PLA+ IIID Max Orange Transmission Distance: 4 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Forest Green At layer #18 (1.52mm) swap to Orange At layer #27 (2.24mm) swap to White for the rest.

Charizard Releasing from Pokeball

Tableaux

user_1264226612

If you want to store many earrings but also look at them when you choose what you wear. You can take the cards out and put them back when you're done.

Earring holder storage

Boucles d'oreilles

Wojciech Kawa

A Minion on the front of the extruder that rolls one eye while printing.Minion on the front of the extruder&nbsp;Please use my profile for printing as I spent some time on it to make sure the print turns out as good as possible. Let me know if the print was successful and if everything fits. If any corrections need to be made, let me know. If you have printed it, please leave a rating. Before installation, the original front and the rotating element must be dismantled. During installation, the eye should be pressed as far as it will go. After putting the face, the eye should be flush with the face or deeper. When assembling, make sure that the top latches are flush with the top edge before pressing from the front.  If you think that standard hooks are too weak and may break, print a version with reinforced fasteners. You will see details in the photos below.  <figure class="image"><a href="https://www.buymeacoffee.com/wojciechkawa" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/493400/2024-01-30_46d010488f47e.webp"></a></figure><a target="_blank" href="https://makerworld.com/it/u/3316073328" rel="nofollow noopener">See my other projects.</a>&nbsp;Assembly instructions below. (same as Funy Face)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/493400/2023-12-27_739987a587726.jpg"></figure><h3>Version with strong top fasteners.</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/493400/2023-12-30_15abccd4d578e.png"></figure>

Minion on the front of the extruder.

Faire valider

KolerCZ

LEGO Key Hanger

Déco ludique

ME STUDIO

Pokemon Psyduck Keychain&nbsp;Please share with me your printing image. By doing so, you will have the opportunity to receive special printing files such as Pokemon character coasters, keychains, and more.Thank you!&nbsp;If you love my works, please come to download a set of 6 key chain, check out my 3D models library.&nbsp;Dimensions: 65 mm diameter 4 mm height&nbsp;This model is for private use only! Welcome to join my Patreon, you can get monthly models and a welcome package.<a target="_blank" href="http://patreon.com/MESTUDIO" rel="nofollow noopener">http://patreon.com/MESTUDIO</a>

Pokemon Psyduck Keychain

Porte-clés

A beautiful set of bookmars with a different pictures in a galactic theme.The full set is to be printer together. It&#39;s designed in such a way which makes this possible with color changes at layers. Filaments Used: <a target="_blank" href="https://eryone3d.com/collections/anniversary-sale/products/matte-pla?ref=uqcriwyg" rel="nofollow noopener">PLA EryOne Galaxy Black</a> Transmission Distance: 0.1<a target="_blank" href="https://s.click.aliexpress.com/e/_DECfxy3" rel="nofollow noopener">PLA Jayo Meta Gray</a> Transmission Distance: 3.5<a target="_blank" href="https://s.click.aliexpress.com/e/_DmomSkb" rel="nofollow noopener">PLA+ Jayo Silk Bronze</a> Transmission Distance: 1.1<a target="_blank" href="https://s.click.aliexpress.com/e/_DmomSkb" rel="nofollow noopener">PLA+ Jayo Silk Gold</a> Transmission Distance: 2<a target="_blank" href="https://kingroon.com/collections/3d-printer-pla-filament?sca_ref=6268797.MtX4KIZPrO" rel="nofollow noopener">PLA KINGROON WHITE</a> Transmission Distance: 6.9  Swap Instructions: Start with Galaxy Black / Black At layer #7 (0.64mm) swap to Dark Gray At layer #9 (0.8mm) swap to Bronze At layer #12 (1.04mm) swap to Gold At layer #13 (1.12mm) swap to WHITE for the rest. If you like my work, drop me a follow!🤜🤛 How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493821/design/2024-04-18_0f99fb49a11e7.png"> Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493821/design/2024-04-18_55b3ae6ccce94.png"> This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need! If you like my work, drop me a follow!🤜🤛

"Galactic Wonders" - Bookmarks set

Marque-pages

Valeria Momo

In addition to the set you will also find the custom-made coaster holder! Very easy to print (stl + 3mf). Print it using your favorite colours!<figure class="image image_resized" style="width: 18.16%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485711/design/2024-06-05_a6a085fb85112.gif"></figure>&nbsp;<h2>Commercial License 🚀</h2>Do you want to sell prints of my models? You can purchase commercial licensing <a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=creatorshare_creator&amp;utm_content=join_link" rel="nofollow noopener">by joining the Commercial License in my Patreon</a>.

COASTER PACMAN SET (6PC) DIFFERENT COLORS + BASE

Dessous de verre

3Dennis

Appreciate the design? Consider supporting my work by <a target="_blank" href="https://makerworld.com/en/u/3694296089" rel="nofollow noopener">following my account</a> :) [Description by original designer]&nbsp;It's a big skeleton that is (for legal purposes) inspired by a Lego skeleton. If you want to know more about this project or see more pictures, check out my <a target="_blank" href="https://docs.juliaebert.com/projects/lego-skeleton/" rel="nofollow noopener">project documentation page</a>.This is also <a target="_blank" href="https://www.thingiverse.com/thing:5019502" rel="nofollow noopener">available on Thingiverse</a>.I was unsatisfied with existing Lego skeleton models online. There was a <a target="_blank" href="https://www.thingiverse.com/thing:3536767" rel="nofollow noopener">model on Thingiverse</a>, but it had a very low resolution STL (circles had 16 sides, for example), and it was originally designed for a 1:1 model. I found a couple of great models on GradCAD from Yauhen - <a target="_blank" href="https://grabcad.com/library/lego-skeleton-minifig-fantasy-era-1" rel="nofollow noopener">Lego Skeleton Minifig Fantasy Era</a> and <a target="_blank" href="https://grabcad.com/library/classic-lego-skeleton-1" rel="nofollow noopener">Classic Lego Skeleton</a>. These included the STEP and SLDPART files, so I could easily modify them and export with high enough resolution for printing.Lego minifigures are designed for injection molding, not 3D printing, so it's tricky to figure out how to break up the model to minimize the amount of support (and in turn, improve the surface finish of the parts). That's why there are so many parts to this print. I also tried to make sure parts could be printed in their strongest print orientation. Lastly, I had to adjust the tolerances of parts to make them snap together as big 3D printed pieces. I spent a lot of time prototyping this model, so I hope it works for you as well!This is designed to be printed at the size of the given STL files: 10x larger than a Lego minifigure. If you scale it up or down, I can't guarantee how the tolerances will hold up. If people are interested in other sizes, I can test the tolerances (and adjust the pin sizes) and make that available.If you want to make any changes of your own (including rescaling), <a target="_blank" href="https://cad.onshape.com/documents/0244ea1dd3a12456399aaaef/w/e0d1c4a865a9519d549edefe/e/475ea9aed0e3ba36a32a9902?renderMode=0&uiState=6172dec4a070904d88332843" rel="nofollow noopener">here are the design files in OnShape</a>. You will need an OnShape account, but there is a free hobby tier available.January 2022 update: There are now additional files that split up the torso into multiple pieces (with more pins!) so that it will fit on smaller printers like the Prusa Mini at 100% scale. See more below in the “Printing Notes” section. New files are in the “Split torso” folder.Printing NotesIf you're print using the 3MF files (recommended), you will need to print: (All supports are already configured here)<ul><li>2x arm.3mf</li><li>2x leg.3mf</li><li>2x body-torso-half.3mf</li><li>1x body-neck-4x-pelvis-shoulder.3mf</li><li>1x connector-pins.3mf</li><li>MMU head:<ul><li>1x head-mmu.3mf</li></ul></li><li>Head as separate pieces:<ul><li>1x head-skull-separate.3mf</li><li>1x head-face-separate.3mf</li></ul></li></ul>If you're printing directly with the STLs, you will need to print: (No supports required, except where noted)<ul><li>2x arm-upper-arm.stl</li><li>2x arm-lower-arm.stl</li><li>2x arm-hand.stl</li><li>2x leg-foot.stl (requires bed-only support)</li><li>2x leg-calf.stl</li><li>2x leg-thigh.stl</li><li>2x body-torso-half.stl</li><li>4x body-pelvis-shoulder.stl</li><li>1x body-neck.stl</li><li>50x connector-pin.stl</li><li>If you are printing the skull and face together with an MMU (or similar):<ul><li>1x head-skull-mmu.stl</li><li>1x head-face-mmu.stl</li></ul></li><li>If you are printing the skull and face separately (or not printing the face inset):<ul><li>1x head-skull-top-separate.stl (requires support everywhere)</li><li>1x head-skull-bottom-separate.stl (requires bed-only support)</li><li>1x head-right-eye-separate.stl (optional, requires bed-only support)</li><li>1x head-left-eye-separate.stl (optional, requires bed-only support)</li><li>1x head-nose-separate.stl (optional, requires bed-only support)</li><li>1x head-mouth-separate.stl (optional, requires bed-only support)</li></ul></li></ul>If you're printing on a smaller printer that can't fit the whole torso (this includes the Prusa Mini), there's an alternative version that splits the torso into two parts, connected by an additional 4 pins. Instead of printing body-torso-half.stl, print the files found in the “Split torso” folder below:<ul><li>2x body-torso-half-upper.stl</li><li>2x body-torso-half-lower.stl</li><li>4x connector-pin.stl (found in the main “STLs” folder)</li></ul>The biggest purpose of the pins is to align parts when you glue them together. For this to work, the pins need to press fit into their respective holes. Before printing all the pins, check that they press fit! If not, scale the width and height up or down as needed to fit the holes. Don't scale the length, or your pieces might not sit flush together.I recommend printing on a smooth bed. This will make for better seams when gluing together the body and arms.This is not a functional, structural part, so you can't get away with sparse print settings to save time and filament. I printed mine in PLA with 7% infill, 2 perimeters, and 0.2 mm layer height. The filament I used was scavenged from a dumpster.Assembly NotesIn general, there's only one way for pieces to fit together, so it should be fairly intuitive how to construct it. However, here's how all of the pins and pieces fit together, in CAD form: (Note that the pelvis and shoulder pieces on the body are identical/interchangeable.)<figure class="image image_resized" style="width:714.016px;"><img src="https://docs.juliaebert.com/assets/img/projects/lego-skeleton/assembled-skeleton-model.png" alt="Skeleton CAD with pins"></figure><ul><li>Here's my suggested assembly procedure:<ul><li>Start by test fitting together the parts with no glue, to check for any misalignment or loose/tight pins.</li><li>Glue all of the pins into one of the pieces you're fitting together.</li><li>Put super glue on the mating surface of the other part. No need to put it in the pin holes; the pins are for alignment, not strength, and if you put glue in them here, it can cure before you get the pieces fully together.</li><li>Line up the parts using the pins and carefully push the parts together. The thin layer of glue will cure very quickly, so there often isn't time for realignment!</li></ul></li><li>I recommend liquid super glue (as opposed to gel). When the pieces get very close together, capillary action will pull the glue to cover a larger area, and you'll get a better connection between the parts.</li><li>Assemble the legs first. These are the most forgiving parts (less precise alignment required to look good), so they're best for getting the hang of things.</li><li>The arms and legs are designed to snap onto the shoulder and hip pegs. Before attaching the shoulder and hip pegs to the body, check that you can snap on the arms and legs.<ul><li>If the arms/legs are too tight to snap on: Either (1) file/sand down the inside of the sockets until they fit on, or (2) slide the ams/legs on from the end of the pegs, then glue the pegs onto the body. The second option is easier, but make sure you don't use too much glue, or the arms/legs could end up glued in place instead of rotating freely. Also note that this option means you won't be able to take the arms and legs off.</li><li>If the arms/legs are too loose to hold their position: Add something to line the inside of the arm/leg sockets, like tape. This extra thickness should help hold them in place.</li></ul></li></ul>Model NotesAs mentioned above, this is based on GrabCAD models from Yauhen - <a target="_blank" href="https://grabcad.com/library/lego-skeleton-minifig-fantasy-era-1" rel="nofollow noopener">Lego Skeleton Minifig Fantasy Era</a> and <a target="_blank" href="https://grabcad.com/library/classic-lego-skeleton-1" rel="nofollow noopener">Classic Lego Skeleton</a> - and modified and shared here with their permission.In case you're curious about the corresponding Lego parts they're inspired by:<ul><li>Skull: #82359</li><li>Body: #60115</li><li>Leg: #6266</li><li>Arm: #59230 and #30377 (It's an amalgamation of these parts, not a part that actually exists; I took artistic license here to make something that looks nicer and is more functional.)</li></ul>To adjust the tolerances to make parts fit together, I always only adjusted the size of the outer piece. That means studs and pegs always retained their original size (48 mm for studs, 32 mm for pegs). So if you want to print any accessories for your skeleton (like a base, a hat, or something for it to hold), you can you these dimensions.

Mega Lego-like Skeleton (10:1 scale)

Halloween

michal.tiller

<h4>Summary</h4>Use:<ul><li>sanding paper (important for superglue working and smooth mechanical operation too)</li><li>superglue (sand contact surfaces before gluing)</li><li>1 rubber band (standard)</li></ul>Model contains:<ul><li>lock core: main block + ratchet + rubber band (not included :))</li><li>11 different keys: 01 - 11</li><li>11 key gates: to make lock possible unlock by just one key</li><li>3 shapes of locks cover: circle, halfcircle and square,</li><li>1 car key (without lock)</li><li>1 key-card (without lock)</li></ul>How it looks working: <a target="_blank" href="https://youtu.be/Gx-FTwBcDco" rel="nofollow noopener">https://youtu.be/Gx-FTwBcDco</a> How it works inside: <a target="_blank" href="https://photos.app.goo.gl/7QTqmpBU6VT2ZjVKA" rel="nofollow noopener">https://photos.app.goo.gl/7QTqmpBU6VT2ZjVKA</a>Do not forget add Decor_rivet on Square and Halfcircle lock and Decor_circleFrame on Circle lock ;) You do not need the Key_xx_gate, if no need the lock accepts just one key. My kids places locks on door handles, hides keys and strart the game...

Working locks + keys from Hello Neighbor

Carl

3Dprint-K81

Try to get four marbles of your colour in a horizontal, vertical or diagonal row on the shifting game board.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_c8883910c75b7.gif"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_aa982670b2a0e.png"></figure>&nbsp;But watch out! To finish your turn, you must press the central button, which will make all marbles shift one position on game board.&nbsp;Stay focused as all marbles change position on every turn!&nbsp;Moreover, you can also disrupt your opponent&#39;s strategy by moving one of their marbles on your turn.&nbsp;Insert a spring (you can take it from a normal writing pen, see photo) or if you want you can buy one on Amazon (LINK):<figure class="image image_resized" style="width:42.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_16527edd8043a.jpg"></figure>&nbsp;<figure class="image image_resized" style="width:42.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_2abf482645e0d.jpg"></figure>&nbsp;<a target="_blank" href="https://www.amazon.it/dp/B0C77WZC9P?starsLeft=1&amp;ref_=cm_sw_r_cso_wa_apan_dp_62G55VTSMGZ1SEEHC0KR" rel="nofollow noopener">QUARKZMAN Compressione Molla, 5pz 304 Acciaio Inossidabile, 6mm OD, 0.6mm Filo Dimensione, 15mm Libero Lunghezza, Argento Tono : Amazon.it: Commercio, Industria e Scienza</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_42f22077852e2.png"></figure>Have fun and good luck!!!&nbsp;Enjoy print and I look forward to your rating and feedback…thanks!

Logic connect 4

Jeux de société

MartinLfr

Simple towel hook for bathroom radiators with 20mm rod diameter. The thickness is set to 3,52mm so that it matches 4 loops of 0.4mm nozzle with 0.44mm line width. Feel free to modify the parameters in FreeCAD, the file is attached.

Towel hook for bathroom radiator

Utile 

秋瑟意浓

&nbsp;不知道80后的你有没有发现，童年时想法设法去接触游戏机想玩一些自己喜欢的游戏，往往大人总是不让玩，当我们长大可以玩的时候，反而找不回当年的激情，于是我设计了这个马里奥风格的收纳盒，来承载儿时的美好记忆&nbsp;模型前部后顶盖可以分别嵌入两个3*2毫米圆形磁铁，增加吸合里充当开关&nbsp;2024年3月6日更新2.0版本宝箱为了方便A1mini用户，在1.0版本上进行了优化，尺寸缩减为86*86*83mm，A1mini用户也可以进行整版打印内部增加了防塌陷格挡，防止上盖组装完成后，塌陷现象<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/649050/2024-03-06_7dfa9a3075833.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/649050/2024-03-06_5d85e8f6e235a.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/649050/2024-03-06_b5833f2bf8bb8.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/649050/2024-03-06_0d157fca27b87.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/649050/2024-02-29_6d4610f10d1b5.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/649050/2024-02-29_132167df50388.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/649050/2024-02-29_7e733d8f2086.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/649050/2024-02-29_bd2f6da0fa028.jpg"></figure>

马里奥宝箱

Catherine Doucet

<h3>Filament Purge/Poop Shadow Box</h3>UPDATE 1 : New faceplates added (Butterfly, Mushroom, Dolphins, Palm Tree, Peacock, Mouse Ears, Weiner Dog)UPDATE 2 : <ul><li>New faceplates added (Dragon Ball Z, Motorcycle, Cat, Ghost, Magic Lamp, Ice Cream, Mandalorian)</li><li>Fusion 360 Design file, Print Profiles and RAW Files have all been modified to include a lip at the bottom of the box to help hold the faceplate and window. The Window_Thickness was not references in the sketch, it is now fixed and changing this parameter will modify the design.</li></ul>&nbsp;&nbsp;We all know multi-color printing with the Bambu printers produces a lot of waste, mostly in the form of filament poop. My design doesn&#39;t help reduce the waste produced but it does help with giving it a purpose. This shadow box with customizable size and face plates is a great way to display the colorful waste in a fun manner. It can be a great way to add a pop of color to your living room, your office or even your kid&#39;s room.&nbsp;For this design, you will need to purchase some small acrylic sheets such as these ones from <a target="_blank" href="https://www.amazon.ca/dp/B088LLCJBK?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">Amazon CA</a> or <a target="_blank" href="https://www.amazon.com/SimbaLux-Plexiglass-Transparent-Protective-Replacement/dp/B088LLCJBK/ref=sr_1_4?crid=22ER4N5UCMCUJ&amp;dib=eyJ2IjoiMSJ9.cdhOOX0nvijtRW_PjncZZO9dR0XJxrsNqs-evrSjIDHN_SiO4qta_my5eOF0M_pMk3Z97aFjZ6oJu9tWmE2HeKJ_8B9hq6tdb615aZra4T52WZ84XVRqd-o6pW_ElRcEcjQYYtgLlSl9tf6GsgJVYudqCmGdCqLdB3349Qk_ybm7FkDFap3QYkyu4-dkjX4CO7k12Vrb8RACnrhOzCy4q-zIef3bU9Y0gBr9gyP7UPw.ZNML7UenX66MZWG6reYkhF12HsjFSHDd9xPRDr88l_c&amp;dib_tag=se&amp;keywords=simbalux%2Bacrylic%2Bsheet%2Bclear%2Bcast%2Bplexiglass%2B5x7&amp;qid=1711399238&amp;sprefix=simbalux%2Bacrylic%2Bsheet%2Bclear%2Bcast%2Bplexiglass%2B5x7%2Caps%2C115&amp;sr=8-4&amp;th=1" rel="nofollow noopener">Amazon US</a>. Do not worry if you can&#39;t find these exact ones, as I have also included the Fusion 360 design file that is parametrized for you to customize the shadow box for yourself.&nbsp;As of right now, the face plates available in the print profile and RAW files are the following :*Note that I will be taking requests for face plates of the provided dimensions, but you can also customize one in your slicer or in Fusion 360<ul><li>Vertical Blank</li><li>Vertical Bambu Logo</li><li>Vertical Brick man</li><li>Vertical Sunflower</li><li>Horizontal Blank</li><li>Horizontal Excavator</li><li>Horizontal Golden Ratio</li><li>Horizontal Star Wars</li><li>Horizontal Brick Logo</li></ul>Assembly instructions :<ol><li>Slide the acrylic sheet and the face plate into the grove at the front of the box. I suggest having the face plate be the outermost item, that way you will be able to easily change it without making a mess</li><li>Add in the filament poop using the optional feeder funnel</li><li>Slide the cover on and you&#39;re done, it is an intentional tight fit so nothing comes out.<ol><li>An optional looser cover is provided in both of the boxes print profiles</li><li>For a 100% secure cover, use a bit of glue</li></ol></li></ol>&nbsp;How to make a custom face plate in the slicer :<ol><li>Right-Click on the blank face plate of your choice</li><li>Click on ‘’add negative part&#39;&#39; then select the ‘’load&#39;&#39; option</li><li>Select your intended file, scale it up or down and place it where you want it to be</li><li>When you slice the file, it should then cut out the loaded file from the blank face plate</li></ol>&nbsp;How to modify the Fusion 360 design fileHere are the parameters that you can change in the Fusion 360 file :<ul><li>Tolerance is used around the sliding cover and between the face plate/acrylic sheet and the walls of the shadow box. It is currently set as 0,2 mm and it worked perfectly for me.</li><li>Window_Thickness is for the thickness of the acrylic sheet. This will not affect the thickness of the face plate (1 mm)</li><li>Window_Horizontal is for the horizontal measurement of the acrylic sheet and face plate. Add the exact value without tolerance in mind.</li><li>Window_Vertical is for the vertical measurement of the acrylic sheet and face plate. Add the exact value without tolerance in mind.</li><li>Box_Depth is to adjust the depth of the shadow box as in making it more slim or thicker. This is the total outside measurement, I don&#39;t recommend you go under 30mm.</li></ul>To change these parameters, you will need to :<ol><li>in the ‘’Solid&#39;&#39; menu, expand the ‘’modify&#39;&#39; tab and select ‘’Change Parameters&#39;&#39;</li><li>You will then have this new window open up, simply change the parameter of your choice in the ‘’Expression&#39;&#39; column</li></ol><figure class="image image_resized" style="width: 66.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000408882/design/2024-04-01_52deddc4daa6d.png"></figure>&nbsp;Commercial License available on my <a target="_blank" href="https://cults3d.com/en/3d-model/art/filament-purge-poop-shadow-box" rel="nofollow noopener">Cults3D page</a>