leiyu3d

Elothan

Often I found myself needing thumbscrews on my projects, and since M3-M8 are my most commonly used sizes i decided to make myself some, and this is my Knurled version of my <a target="_blank" href="https://makerworld.com/en/models/170179" rel="nofollow noopener">standard thumbscrews.</a>&nbsp;<figure class="image image_resized" style="width: 43.64%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000170177/design/2023-12-14_z3acqpjob9ja.png"></figure>&nbsp;The thumbscrews are designed for socket head screws and use a nut in the compartment on the underside to connect them securely together. Make sure to tighten them as well as possible beforehand. If you want extra strong bond between the bolt and the nut you can apply some thread locker or similar.(I recommend to use nylock nuts)Depending on your printer, you might need supports in the cavity that holds the nut for the normal/first version, but it has been printed fine without if you place the nut side up.Changelog:14.10.22 Fixed an issue with M3 No supports. thanks to @<a target="_blank" href="https://www.printables.com/social/246924-mathiasl" rel="nofollow noopener">mathiasl</a> for pointing it out :)&nbsp;My collection of other tools and related items can be found <a target="_blank" href="https://makerworld.com/en/u/3322519079" rel="nofollow noopener">here</a>&nbsp;I have also taken inspiration from JW693Ds suggestion and added a version with a punch trough layer of bridging if you have problems printing the normal one without support. That version is to be printed with the round hole facing the buildplate.&nbsp;Happy Printing, and if you like it, please post a make, as that is always appreciated :D

Knurled M3-M8 Thumbscrews

小零件

RB Design

Made this line cutter for a group of kids I took on a fishing trip. I didn&#39;t want them carrying knives, but they like to change lures a lot. This allows them to cut the line any time they need, but doesn&#39;t allow them to cut themselves. Will cut Mono and braided line with ease.Print both parts, place a standard utility blade in the slot provided, add glue and press the two parts together (guides will line up the parts).All set to go. Thank you for downloading, I hope you enjoy.

Fishing Line Safety Cutter

钓鱼

PaulBB

<h4>Update 6th May 2023:</h4>Thanks for the great feedback everyone that downloaded and made this model! I finally had time to make a new version. I've added a few things to the model:<ul><li>A stopper that stops the drawer from beign pulled out completely. Designed in a way that you do not need any supports or extra prints.</li><li>Made the whole drawer about 2 perimeters thicker (0.8mm) (except the bottom). It is way sturdier that way. This was also needed to keep the stopper machanism working. Otherwise the whole drawer bent too much when pulling it all the way out.</li><li>Added an alternative version without the handle, but with just a hole to install your own (maybe 3D printed) handle yourself. The hole has a diameter of 4.2mm to install handles with a M4 screw.</li><li>Added a middle piece to join multiple drawers together</li><li>Added versions without the grid in the bottom.</li></ul>I am also currently working on some inserts which I will upload in a few days. &nbsp;<h2>Under Desk Drawer</h2>This model is designed to fit underneath your desk, providing easy access to your pens, papers, notebooks, and other essentials. Features a smooth sliding mechanism to ensure that your items stay secure and within reach. Plus, it's easy to install with the three mounting holes on each side. (I installed it with two on each side which works just fine.)The size of the bottom plane is approximately 166mm (width) x 176mm (depth) x 30mm (height).The slides are just mirrored versions of each other.Supports only needed for the drawer handle.Fits a 200mm x 200mm print bed.&nbsp;<h2>Installation</h2>This is the way that worked best for me, there may be better ways to install the drawer. Feel free to comment if you find a easier way :)<ul><li>Mount the slide that you plan to use as the outer-most first. Install one screw, align the slide perpenticular to the desk and install the second screw for the first slide. </li><li>Take the drawer and hold it a against the slide. Take the next slide and press it against the drawer where it should be. Install the back screw first and then the second one.</li><li>Repeat for each middle slide you plan to use. The middle slide has the same dimensions as a regular slide, so you can reuse the holes if you want to make it bigger later.</li></ul>Use two 3mm Screws per slide to mount the drawer to your desk. Be careful to not overtighten the screws as it may break the mounting holes depending on your material/print settings!

Under Desk Drawer

收纳

3D Art

Ich habe endlich mein eigenen AMS Aufsatz konstruiert so wie ich es benötige und optisch Cool und praktisch finde.(inspiriert von Ben Levi)&nbsp;-Größeres Fach für Druckplatten.-Sortierte Zubehör Schublade. für nozzle,etc.-integriertes LED zum Anschrauben mit M3 Schrauben/Muffen.&nbsp;LED: <a target="_blank" href="https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>Gewindeeinsätze M3: <a target="_blank" href="https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694" rel="nofollow noopener">https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694</a>M3 Schrauben: https://www.amazon.de/St%C3%BCck-Linsenkopf-Schrauben-M3x6-Linsenkopfschrauben/dp/B07K7NRDPX/ref=sr_1_2?&nbsp;I have finally designed my own AMS attachment the way I need it and find it visually cool and practical.(inspired by Ben Levi)-Larger compartment for printing plates.-Assorted accessories drawer. for nozzle, etc.-integrated LED for screwing on with M3 screws/sleeves.&nbsp;LED: https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details&nbsp;I would like to share my work with you and hope you have fun and enjoy it.&nbsp;

AMS Riser Superstructure by 3D Art/ X1/P1

打印机

youngzee722

Bow Grip反曲弓推把

射箭

NeoTrace

Designed a Storage Box for Large Format Lenses, so it can handle up to 3 Lenses and is kinda modular

Storage for Large Format Lenses

摄影

pbbence1994

My next kit card is based on a Red Bull Air Race MXS-R plane. Cut the parts out with pliers, nail sissors or hobby knife. The assembly is easy and self explanatory. The parts should fit togedhter tightly, but you can always use a bit of super glue to secure the parts together. Stay tuned for more Air Race planes! The pylon display will be also available to download soon check out my profile. Have fun printing it!

Air Race plane kit card (MXS-R Breitling)

玩具

Josh-3D

Someone had commented on one of my other designs about a Chinese Chess variation. I didn't want to do more within the travel series right now though, but was interested in making a Chinese Chess board, and thus this project was born. I wanted to incorporate magnets into the board, and also to do a one piece board. For storage, I have a print in place case for the player pieces.&nbsp;You'll need 124 D 4mm x H 6mm magnets, like those that can be found at the following link. 32 for the player pieces, 90 for the board, and 2 for the case.<a target="_blank" href="https://www.amazon.com/gp/product/B075PMYRFT/" rel="nofollow noopener">https://www.amazon.com/gp/product/B075PMYRFT/</a>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buy Me a Coffee</a>

小零件

钓鱼

收纳

打印机

射箭

摄影

玩具

游戏