乐高的Bamboom

Brent Peterson

<h2>Toroidal Launcher</h2>This is an original design created for the <a target="_blank" href="https://makerworld.com/en/contests/5" rel="nofollow noopener">Flying Objects design contest</a> and features a handheld three-stage planetary gearbox that launches a toroidal ring over 3000 RPM! The design is 100% 3D printed; all pieces press fit together and no additional hardware is required.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-15_92eaaa9691a14.gif"></figure><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you&#39;re interested in seeing more designs like this please consider boosting to support development of future projects. Thank you!</boostcontent></boostme><h2>Modifications and Add-on Designs</h2><ul><li>Gearbox modifications<ul><li><a target="_blank" href="https://makerworld.com/en/models/99992#profileId-106623" rel="nofollow noopener">High torque conversion kit (1:2 ratio)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105586" rel="nofollow noopener">1:3 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/108803" rel="nofollow noopener">1:4 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105590" rel="nofollow noopener">1:5.5 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/110188" rel="nofollow noopener">1:7 ratio gearset</a></li></ul></li><li>Toroidal ring designs<ul><li><a target="_blank" href="https://makerworld.com/en/models/102279" rel="nofollow noopener">Toroidal Launcher Mini Rings - 100mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/97633" rel="nofollow noopener">Toroidal Launcher Mini Rings - 150mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/102728" rel="nofollow noopener">Toroidal Launcher Mini Rings - 200mm pitch</a></li></ul></li><li>Remix Templates<ul><li><a target="_blank" href="https://makerworld.com/en/models/123219" rel="nofollow noopener">Threaded cap</a></li><li><a target="_blank" href="https://makerworld.com/en/models/125073" rel="nofollow noopener">Hexagon gear driver</a></li></ul></li></ul><h2>Specifications</h2><ul><li>Three stage planetary gearbox with 1:48 gear ratio (overdrive)<ul><li>0.75mm gear module for ultra-smooth performance (24/72 teeth)</li><li>10mm hex driver for connecting gear stages</li></ul></li><li>Toroidal ring design with four blades (1.2mm thick) available in three sizes<ul><li>100mm diameter, 150mm pitch</li><li>125mm diameter, 175mm pitch</li><li>150mm diameter, 200mm pitch</li></ul></li></ul><h2>Printing Tips</h2><ul><li>All prints pictured were printed using Bambu Basic and Matte PLA</li><li>For best results run flow rate calibration and thoroughly clean build plate</li><li>The launcher gears are available in two print profiles with the following changes to the standard 0.20mm profile:<ul><li>Arachne wall generator</li><li>5x top and bottom walls, 25% infill</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The toroidal rings are available as a single print profile with the following changes to the standard 0.20mm profile:<ul><li>0.6mm line thickness, Arachne wall generator</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The launcher housing prints with the standard 0.20mm profile.</li></ul><h2>Printed Parts</h2><ul><li>Launcher Gears<ul><li>SunGear24.step [3x]</li><li>PlanetGear24.step [9x]</li><li>PlanetCarrier24.step [3x]</li><li>RingGearDouble.step [1x]</li><li>RingGearLid.step [1x]</li><li>RingDriver.step [1x]</li><li>GearDriver.step [1x]</li></ul></li><li>Launcher Housing<ul><li>HousingBase.step [1x]</li><li>HousingRingLid.step [1x]</li><li>HousingCarrierHolder.step [1x]</li><li>HousingCarrierThreads.step [1x]</li></ul></li><li>Toroidal Rings<ul><li>ToroidalRing100.step [1x]</li><li>ToroidalRing125.step [1x]</li><li>ToroidalRing150.step [1x]</li><li>ToroidalRingDriver.step [1x]</li><li>ToroidalRingLauncher.step [1x]</li></ul></li></ul><h2>Launcher Assembly</h2><ul><li>Assembly the planet carrier with three planet gears and one sun gear as shown below. Repeat for all three planet carrier assemblies.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_efae722ebe2db.gif"></figure><ul><li>Use the shorter hex drive to connect two sets of gears. Align both planet carriers and hold them with one hand while holding the double ring gear in the other hand and slowly turning as you close the gear; once closed insert the assembly into the main housing to hold secure. The gears should spin freely; if they don&#39;t remove the gear assembly and repeat this step.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_f1371c6d57ee6.gif"></figure><ul><li>Use the longer hex drive to connect the last set of gears and then assemble with the threaded cap as shown below.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_4926c45fbbf51.gif"></figure><ul><li>Carefully mesh the single ring gear with the planet gears taking note of the 2mm flat section that is positioned towards the main gear assembly as shown below. Use the same method of rotating while slowly closing and covering with the cap to hold secure.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_54c6fffceb4e5.gif"></figure><ul><li>Done! The assembly should spin smoothly with the output shaft making 48 rotations for every one turn of the input knob. Performance depends on printer tolerances and filament used; for best results use the include print profiles with Bambu Studio (supports many different printers). A bit of lubricant can also be added to the gears to improve performance.</li></ul><h2>Toroidal Ring Assembly</h2><ul><li>Insert the hex drive into the interlocking driver; the clearance is tight but it should be a snug fit.</li><li>Insert the assembled driver into the output sun gear, the fit should be the same.</li><li>If the driver does not stay secured when launching the ring a small amount of CA glue can be use.</li></ul><h2>Changes</h2><ul><li>v1<ul><li>Initial release; files now available in v1old folder</li></ul></li><li>v1.1<ul><li>Updated print profiles with improved settings for gears and rings</li><li>Improved single color print profile, fits on A1 mini and objects are laid out to allow skipping</li><li>Improved clearance of gears and overall meshing</li><li>Updated toroidal ring to use the same launcher as the mini rings<ul><li>Print profile includes 3 sizes (100mm, 125mm, 150mm)</li></ul></li><li>Updated assembly instructions to have fewer steps with a GIF for each one</li></ul></li><li>v1.1.01<ul><li>Added new section for template designs intended for remixing</li></ul></li></ul>

Toroidal Launcher - High RPM Planetary Gearbox

玩具

IXPatch

This is a flexible, articulated Charizard. It can stand on its feet and has a flexible neck, tail and wings.&nbsp;It prints in place, no supports or assembly required, and is PLA compatible.&nbsp;In addition to the single-color version, I have also included the multicolor version that you can see in my pictures. Enjoy :)

Charizard - Flexi Articulated Pokémon

手办

uhltimate

Description:Introducing my 6-Shot Disc Shooter that launches discs over 8 meters!&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/gTluRbJBJP0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/gTluRbJBJP0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Features:<ul><li>Impressive Range: Launch discs with precision over 8 meters.</li><li>6-Shot Magazine: Experience continuous fun with swift and hassle-free reloading.</li><li>Compact and Portable: Take the excitement anywhere with this portable and compact design.</li></ul>Safety Guidelines:<ul><li>Aim responsibly, avoiding people, animals, or fragile items.</li><li>Always wear eye protection.</li><li>Keep the disc shooter out of reach of children.</li></ul>&nbsp;Some nice add-on parts and modifications:<ul><li>Mesmerizing Discs with colorized pattern by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/108108#profileId-115446" rel="nofollow noopener">https://makerworld.com/en/models/108108#profileId-115446</a></li><li>Magazine Extension - 12 Shots by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/109578#profileId-117052" rel="nofollow noopener">https://makerworld.com/en/models/109578#profileId-117052</a></li><li>Easy load handle by @madizmo <a target="_blank" href="https://makerworld.com/en/models/102564#profileId-109231" rel="nofollow noopener">https://makerworld.com/en/models/102564#profileId-109231</a></li></ul>&nbsp;Printing Tips:<h2>“set wall loops to 6 for the spring !”</h2>(or more ;-)Choose a durable filament for longevity.Ensure precise calibration for accurate dimensions.&nbsp;Print Orientation for the Frame (no Support required)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-22_ca11c87353632.png"></figure>&nbsp;&nbsp;cutaway model (Assembly aid)&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-18_0bc99f0ee1ade.jpg">&nbsp;

6-Shot Disc Shooter

武器

squinn

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;

Portable Cable Organizer / Winder

工具

thrutheframe

<h3>NOTE:</h3><ul><li>Please read the instruction guide below</li><li>I do my best to double-check and test the print profile I create. They are up to date with whatever changes I made to the designs. If you are using profiles made by others, please check if they are updated.</li></ul><h3>UPDATE: 24 Dec 2023</h3>Would like to wish everyone a Merry Christmas and a Happy New Year. It has been a week since GRIP was uploaded to MakerWorld for the community. Since then I had some feedback on the retainer clips. I have updated the design to improve layer adhesion and tested it. Would like the thanks those that tried and printed GRIP. Happy printing. &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-24_72f6fa29ece5e.png"><figcaption>Old (Left) vs New (Right) </figcaption></figure><h3>UPDATE: 15 Dec 2023</h3>I have received several questions regarding the differences between GRIP and <a target="_blank" href="https://makerworld.com/en/models/92486#profileId-99168" rel="nofollow noopener">Bambu Lab version</a>. While both designs serve the same function, my design approach is based on considerations that I feel are important when designing parts for 3D printing.<ul><li>Reliability and Rigidity - I opted for screw mounting the GRIP bracket because I take into consideration that metal and plastic behave differently with changes in ambient temperature. Clamping the GRIP using screws to the top gantry greatly reduces the chance of any failure due to parts loosening. </li><li>Ease of Print and Print Orientation - Proper orientation improves print success and user confidence. I design parts with little or no support. A major weakness of 3D-printed parts is the layer lines. With proper orientation of prints, this weakness can be avoided. For example, the AMS lite swivel bracket is printed at 45 degrees to improve the strength of the swivel and eliminate the use of support. </li></ul><figure class="image image_resized" style="width:49.99%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-15_534012b0bf62c.png"></figure><ul><li>Prudent in filament usage - good filament is not cheap. I want to be prudent with filament usage but at that same time NOT sacrificing strength and rigidity. It&#39;s a delicate balance and I am happy to say that GRIP has managed to achieve it with a slim profile and a pair of discreet stabilizing feet.</li></ul>&nbsp;&nbsp;<h3>INTRODUCTION</h3>When I placed the A1 combo on my workstation, I realised the setup required a lot of space on my table. So I decided to design a bracket to mount the AMS lite on the A1 frame. As usual, I set a few parameters and requirements when designing this bracket:<ul><li>Easy and fast to print with little/no support needed.</li><li>Sturdy and reliable when fully loaded and swivel for easy loading.</li><li>Use existing mounting holes on the AMS lite for mounting.</li><li>Secure mounting using screws.</li><li>A holistic system that will work alongside my <a target="_blank" href="https://makerworld.com/en/models/91768#profileId-98168" rel="nofollow noopener">A1 PMS (purge management system aka poop bin)</a>.</li></ul><figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_454c112c17058.png"></figure></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_9e06679ae9eb3.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_d0a3fac8de1c3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_f1057fdb05af8.png"></figure></td></tr></tbody></table></figure>Introducing the AMS lite bracket for the A1. It resembles a gymnast hand grabbing and balancing on a bar. I decided to name it GRIP. It is mounted onto the 40x20 gantry with a clamp-style bracket and secured with M3 screws. This system allows the AMS to swivel improving the load and unload of filaments. 2 retainer clips are used to secure the AMS during printing. A set of PTFE tube guides (dual-colour print) prevents the tubes from overbending and breaking the filament.&nbsp;A set of Stabilization Brackets for the A1 helps reduce the wobbling due to the change in the centre of gravity.<figure class="image image_resized" style="width:70.09%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_e63eed49bc5bb.png"></figure>&nbsp;<h3>BOM</h3><ul><li>Brass inserts M3xOD5mmxL4mm - 9pcs</li><li>SHCS or BHCS M3x10mm - 9pcs</li><li>Thin double-sided tape</li></ul>I get my brass insert from <a target="_blank" href="https://www.aliexpress.com/item/4000232858343.html?channel=twinner" rel="nofollow noopener">this store</a> on AliExpress. Please choose M3 X D5.0 X L4.0 <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2024-01-06_44af93a85057c.png"></figure>&nbsp;<h3>PRINT INSTRUCTIONS</h3><figure class="image image_resized" style="width:70.05%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_41cb92fe8c3c9.png"></figure><ol><li>There are 4 build plates to print. Wall perimeters, top and bottom layers are set to 4. This setting helps to produce strong parts.</li><li>I printed my version in <a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament" rel="nofollow noopener">BambuLab Basic PLA</a> Jade white and Black. (not affiliated link)</li><li>Build plates 01&amp; 02 - print according to orientation, if you prefer to have all the same color. You can combine the parts from both plates together and print.</li><li>Build plate 03 - IMPORTANT!! DO NOT CHANGE THE ORIENTATION OF THE PRINT. It was designed to print that way to improve structural rigidity during operation.</li><li>Build plate 04 - This is a dual-color print for the PTFE tube guide.</li></ol>&nbsp;<h3>BUILD INSTRUCTIONS</h3><ul><li>Turn off the power to A1. Unplug the AMS lite. Practice safety habits.</li><li>Use a soldering iron to install all 9 brass heat inserts according to the images seen above.</li><li>Ensure that all inserts are flush to the surface.</li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_bb96f4e954a04.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_5264dcd801345.png"></figure></td></tr></tbody></table></figure>&nbsp;<ul><li>There is a lip inside the swivel bracket that helps secure itself to the AMS lite, a tap will help align the bracket.</li><li>Install all 4 screws that come with the A1 combo kit. It comes in a pack labelled “For AMS Stand”</li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_886968a17e87f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_3ac274607a273.png"></figure></td></tr></tbody></table></figure>&nbsp;<ul><li>Install the GRIP main body to the gantry. Secure with four M3x10mm screws horizontally.</li><li>Insert the AMS bracket and lock it with the clamp using four M3x10mm screws.</li><li>Install the retainer clips on both sides. (Note: Remove clips when swivelling the AMS lite)</li><li>Optional - screw in the last M3x10mm vertically.</li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_8df88000560e5.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_2efe27d7d788.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_ac5ce21fc8fb4.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_851d3609b191c.png"></figure></td></tr></tbody></table></figure>&nbsp;<ul><li>Install wobble reduction brackets at the back of the printer. The side should flush against the curved surface of the base.</li><li>There is a left and right side. The left side will have a cutout for the printer switch.</li><li>Optionally u can use a bit of thin double-sided tape to secure brackets to the printer.</li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_9f7a6576b9fff.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_b9b45ab6f1c2c.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<ul><li>To check the clearance. Turn on the A1 and do a homing.</li><li>Raise the X gantry to the top level. There should be a clearance between the tool head and the AMS lite with spool installed.</li></ul><figure class="image image_resized" style="width:60.03%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_a572654971a6d.jpg"></figure><figure class="image image_resized" style="width:60.05%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_2de906d9a422f.jpg"></figure>&nbsp;<ul><li>Install the PTFE tube guide bracket.</li><li>Home printer so that tool head reaches the bed. This is the maximum distance required by the PTFE tube.</li><li>The longer tubes go to 1&amp;2 and the shorter tubes go to 3&amp;4.</li><li>Turn off your printer, and connect your AMS lite before turning it on again.</li><li>Do a homing and double-check the tubes, cables, etc are not in each other way.</li></ul><figure class="image image_resized" style="width:59.98%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_0f0cc9729c151.png"></figure><figure class="image image_resized" style="width:60.05%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090586/design/2023-12-12_9ec18ef2720b1.jpg"></figure>&nbsp;<h3>CONCLUSION</h3>To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like my designs and wish to contribute to my coffee addiction &amp; help fund the filaments and materials needed for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated.&nbsp;<h3>CAVEAT</h3>As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion.&nbsp;&nbsp;&nbsp;

玩具

手办

武器

工具

配件